Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Award Notice opportunity was posted on August 24, 2006. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

66--Instruments and Laboratory Equipment

Awarded
FA8104-06-Q-0299Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336412
New
DIBBS
SPRAY TIP, NOZZLE, FUEL
Solicitation # SPE4A7-27-T-3529
Solicitation SPE4A7-27-T-3529 is a Request for Quotations issued by the DLA Weapons Support ASC Supplier Oper AE and AF Div for the procurement of 50 fuel injector nozzle spray tips. This item is designated as a Navy Identified Critical Safety Item and a Critical Application Item, requiring strict adherence to basic drawing NR 99207 5046T91 Revision AD and quality assurance provision QAP 13873 QAP-E09. The procurement mandates a high standard of quality management, requiring compliance with SAE AS9100 and CMMC Level 2 cybersecurity certification. Delivery is required within 120 days, with a need ship date of March 17, 2027, and a final delivery date of January 26, 2028, to DLA Distribution San Diego. The contract is not a small business set-aside, though offerors must provide representations regarding their business size and socioeconomic status. Key compliance requirements include the Buy American Act, the Berry Amendment, and restrictions on covered telecommunications equipment. Packaging must follow MIL-STD-2073-1E and MIL-STD-129, and any hazardous materials must include a Safety Data Sheet. Inspection is required at the origin per FAR 52.246-2. For administration, the contractor must use the Wide Area WorkFlow system for invoicing and payment, and all contractors must register via the Account Management and Provisioning System to access the Vendor Shipment Module.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

in 8 days
NAICS: 336412
New
DIBBS
MASK, OXYGEN
Solicitation # SPE4A7-27-T-3445
Solicitation SPE4A7-27-T-3445 is a Request for Quotations issued by the DLA Weapons Support ASC for the procurement of 33 oxygen mask assemblies, identified as NSN 1660-01-479-5621. This item is designated as an Air Force Critical Safety Item (CSI), requiring the manufacturer to maintain a quality management system compliant with SAE AS9100 or an equivalent standard. The contract mandates a First Article Test (FAT), requiring the delivery of 3 units to the Materials and Textiles Lab at Wright Patterson AFB within 120 calendar days of the contract date. The government will then notify the contractor of approval or disapproval within 90 days of receipt. The procurement is subject to strict domestic material restrictions, including the Buy American Act and the Berry Amendment, with a reduced threshold of $150,000. Offerors must certify they will not provide covered defense telecommunications equipment or services and must comply with DFARS 252.204-7012 regarding the safeguarding of covered defense information. All supplies must be marked according to MIL-STD-129 and packaged per MIL-STD-2073-1E. Inspection and acceptance are conducted at the point of origin, utilizing a zero-based sampling plan. All quotes must be submitted via the DIBBS portal, and payment processing is handled through the Wide Area WorkFlow (WAWF) system.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

in 8 days

AI Contract Overview

Show more

This contract, solicitation number FA8104-06-Q-0299, is for the procurement of two infrared radiation sensing pyrometers, part number 1960M40P09, applicable to the F110-129 engine. The devices feature a complex electronics assembly with a silicon detector, a fuel-cooled heat-sink housing to maintain temperature limits, a sapphire lens, and a sight tube designed to be cleared of debris by fifth-stage compressor airflow. These units are installed at the aft side of the high-pressure turbine blades and connect to electronic controls via an electrical cable. The procurement is managed by the Department of the Air Force through the Air Force Materiel Command at Tinker AFB, Oklahoma, with the items destined for FMS countries. Rosemount Aerospace Inc. is listed as an approved source for this acquisition. The anticipated award date was July 19, 2006, with a final delivery deadline of August 31, 2007.

General Info

Agency

N/A

Contract Value

$20,496

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing

Place of Performance

MN, USA

Set-Aside

NONE

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded
Posted

Presolicitation

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyN/A
Contacts1 person available
OfficeN/A
Organization / Agency
N/A
Office AddressN/A
Contacts

Full Description

Show more
PR Number(s): Item: 0001 NSN: 6685015230235PRPR PYROMETER P/N: 1960M40P09, Description: THE PYROMETER IS AN INFRARED RADIATION SENSING DEVICE WITH THE FOLLOWING FEATAURES: 1. AN ELECTRONICS ASSY PKG INCLUDING A PHOTODIODE ASSY THAT INCLUDES A SILICON DETECTOR WITH AN INTEGRAL TRANSIMPEDANCE AMPLIFLIER,, TWO TEMPERATURE COMPENSATING RESISTORS, AND TWO OPERATIONAL AMPLIFIER OFFSET RESISTORS. AN ELECTRONIC PKG CONSISTING OF THREE AMPLIFIERS AND A VOLTAGE DIVIDER (BIAS) NETWORK. THE ELECTRONIC COMPONENTS ARE ATTACHED TO TWO CCAS. THE CCAS ARE FASTENED TOGETHER AND TO THE PYROMETER HOUSING COVER USING SPACERS, BRACKETS AND SCREWS. THIS ASSY IS PRESSED AGAINST THE HOUSING BOTTOM WHEN THE COVER IS ATTACHED, THEREFORE PROVIDING COOLING AND SUPPORT FOR THE ASSEMBLY. A PLATE ASSY CONTAINING EMI FILTERS IS SCREWED TO THE PYROMETER HOUSING. 2. A FUEL COOLED HEAT-SINK HOUSING THAT ENCLOSES THE ELECTRONIC PKG. A SMALL PORTION OF COOLING FUEL FLOW IS ROUTED AROUND THE HEATSINK. FUEL ABSORBS AND CARRIS OFF HEAT TO KEEP THE TEMP OF THE ELECTRONICS PKG WITHIN ALLOWABLE LIMITS. 3. A LENS TUBE THAT CONTAINS ONE SAPPHIRE LENS. 4. A SIGHT TUBE THAT IS SCREWED TO THE LENDS TUBE ASSY. AIR FROM THE FIFTH STAGE COMPRESSOR IS DIRECTED THROUGH THE SIGHT TUBE. AIRFLOW THROUGH THE SIGHT TUBE HELPS KEEP DIRT OFF THE SIGHT TUBE. 5. PYROMETER IS INSTALLED WITH SIGHT TUBE AT THE AFT SIDE OF HPT BLADES. 6. AN ELECTRICAL CONNECTOR IS INSTALLED ON THE SIDE OF THE PYROMETER. AN ELECTRICAL CABLE CONNECTS THE PYROMETER TO ELECTRONIC CONTROL (AFTC/FTC/DEC).Total Line Item Qty: 2.0000 Destn: FMS COUNTRIES. Delivery: 31AUG2007, 2.00 The anticipated award date will be:19JUL2006 Electronic procedure will be used for this solicitation. Contracting Office Address Department of the Air Force, Air Force Materiel Command, Tinker OC-ALC - (Central Contracting), 3001 Staff Drive, Ste 2AC1109H, Tinker AFB, OK, 73145-3015 Description 66-PYROMETER: SOL FA8104-06-Q-0299. DUE: 04 AUG 06, OC-ALC/PKA TINKER AFB OK 73145-3015, for additional information contact Mathew Watts/PKA/ +1 (555) 000-0000. Item 0001 NOUN: PYROMETER, NSN: 6685-01-253-0235 PR, P/N: 1960M40P09, applicable to F110-129 Engine. Description: THE PYROMETER IS AN INFRARED RADIATION SENSING DEVICE WITH THE FOLLOWING FEATAURES: 1. AN ELECTRONICS ASSY PKG INCLUDING A PHOTODIODE ASSY THAT INCLUDES A SILICON DETECTOR WITH AN INTEGRAL TRANSIMPEDANCE AMPLIFLIER,, TWO TEMPERATURE COMPENSATING RESISTORS, AND TWO OPERATIONAL AMPLIFIER OFFSET RESISTORS. AN ELECTRONIC PKG CONSISTING OF THREE AMPLIFIERS AND A VOLTAGE DIVIDER (BIAS) NETWORK. THE ELECTRONIC COMPONENTS ARE ATTACHED TO TWO CCAS. THE CCAS ARE FASTENED TOGETHER AND TO THE PYROMETER HOUSING COVER USING SPACERS, BRACKETS AND SCREWS. THIS ASSY IS PRESSED AGAINST THE HOUSING BOTTOM WHEN THE COVER IS ATTACHED, THEREFORE PROVIDING COOLING AND SUPPORT FOR THE ASSEMBLY. A PLATE ASSY CONTAINING EMI FILTERS IS SCREWED TO THE PYROMETER HOUSING. 2. A FUEL COOLED HEAT-SINK HOUSING THAT ENCLOSES THE ELECTRONIC PKG. A SMALL PORTION OF COOLING FUEL FLOW IS ROUTED AROUND THE HEATSINK. FUEL ABSORBS AND CARRIS OFF HEAT TO KEEP THE TEMP OF THE ELECTRONICS PKG WITHIN ALLOWABLE LIMITS. 3. A LENS TUBE THAT CONTAINS ONE SAPPHIRE LENS. 4. A SIGHT TUBE THAT IS SCREWED TO THE LENDS TUBE ASSY. AIR FROM THE FIFTH STAGE COMPRESSOR IS DIRECTED THROUGH THE SIGHT TUBE. AIRFLOW THROUGH THE SIGHT TUBE HELPS KEEP DIRT OFF THE SIGHT TUBE. 5. PYROMETER IS INSTALLED WITH SIGHT TUBE AT THE AFT SIDE OF HPT BLADES. 6. AN ELECTRICAL CONNECTOR IS INSTALLED ON THE SIDE OF THE PYROMETER. AN ELECTRICAL CABLE CONNECTS THE PYROMETER TO ELECTRONIC CONTROL (AFTC/FTC/DEC).Destn: DGR005. Delivery: 2ea 31 AUGUST 2007. The approximate solicitation issue date will be 05 JULY 2006. The response due date will be 04 AUG 2006.The following source has been approved for this acquisition: ROSEMOUNT AEROSPACE INC., (Cage Code: 60678), SAINT PAUL, MN 55121-1217. Qualified sources solicited may submit a bid, proposal, or quotation which shall be considered. A Determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements as cited in each individual solicitation. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. Note: An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at +1 (555) 000-0000. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Note: Faxed solicitation requests can be submitted to OC-ALC/PKA, Tinker AFB OK 73145-3015, FAX NUMBER +1 (555) 000-0000. See Note(s) 26; Mathew Watts, Contract Negotiator, Phone +1 (555) 000-0000, Fax +1 (555) 000-0000, Email: contact@example.gov

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS