Top

66--Seismographic Equipment.

Active

140G0319Q0038Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

The U.S. Geological Survey’s Earthquake Science Center in Menlo Park, California, is conducting a sources sought inquiry to identify businesses capable of supplying two complete nodal seismograph systems that meet stringent technical specifications. These systems must be highly expandable, able to handle more than 10,000 units, and provide three-component seismic data recording with precise internal GPS timing and location features. Key performance parameters include GPS-timed accuracy within plus or minus 10 microseconds, low total harmonic distortion, 24-bit analog-to-digital conversion resolution, selectable sampling intervals ranging from 0.2 to 4 milliseconds, and a broad operating temperature range from -40°C to +70°C. The devices must also be rugged and portable, with dimensions and weight limitations, IP67 dust and waterproof rating, extended battery life supporting at least 30 days of continuous recording, and quick recharge capability. Additional requirements cover sensor sensitivity and damping, as well as ancillary components like battery charging and data download racks, with software for programming and data management included. This notice serves solely for market research purposes to gauge industry interest and capability and does not constitute a solicitation or an obligation by the government. Respondents must belong to the NAICS code 334519 category (Other Measuring and Controlling Device Manufacturing) with up to 500 employees and submit detailed capability statements demonstrating their qualifications. Responses must be submitted exclusively via email by the specified deadline. The final contract delivery location is Menlo Park, California, and the purchasing agency is the Department of the Interior’s Office of Acquisition and Grants. The government will use the information submitted to inform potential future solicitation but will not accept quotes or bid proposals at this stage.

General Info

Seeking suppliers for two expandable nodal seismograph systems with GPS timing, rugged design, and extended battery life.

Agency

Department Of The Interior → Ofc Of Acqusition Grants-National

NAICS

334519 - Other Measuring and Controlling Device Manufacturing

Place of Performance

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedFeb 11

special-notice

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of The Interior → Ofc Of Acqusition Grants-National

ContactsNo contacts available

OfficeRESTON, VA, 20192, USA

Organization / AgencyDepartment Of The Interior → Ofc Of Acqusition Grants-National

Office AddressRESTON, VA, 20192, USA

ContactsNo contact information available

Full Description

Seismographic Equipment. This is a Sources Sought inquiry only. This sources sought notice is for informational purposes only and shall not be considered a solicitation, obligation, or commitment by the Government. This notice is for market research to determine the availability of any businesses with capabilities to provide the required product. The USGS Earthquake Science Center, Menlo Park, CA requires two complete nodal seismograph systems meeting or exceeding the following salient characteristics: 1. System expandable to more than 10,000 units 2. Three-Component recording: One vertical and two horizontal Channels. 3. Internal GPS for timing and location. 4. GPS Timing standard: 1 PPM. 5. Timing accuracy: Plus or minus 10 Microseconds, GPS disciplined. 6. Total harmonic distortion <0.0002% at 0dB gain or better at 0dB gain. 7. 24-bit ADC resolution. 8. Sampling interval can be chosen at 0.2, 0.5, 1,2, or 4 milliseconds. 9. Pre-amplifier gain (0oB to 36 dB in six dB steps). 10. Operating temperature range, at a minimum, -40 degrees C to +70 degrees C. 11. Dust and waterproof: IP67 or better. 12 Data storage: Must be at least 32 GB expandable to 64. 13. Dimensions: Less than 105mm, Length, x 98mm Width, x 190mm Height, without the sensor spike. Area less than 4.2¿ x 3.9¿ x7.5¿. For cylinders: Less than 4.5¿ diameter by 7.5 ¿long, without spike. 14. Total weight: less than 5.5 lbs. (Including geophone spike and internal battery). 15. Battery operating live @25 degrees C and 2-ms sampling rate, 30 days or more of continuous recording. 16. Recharge time, from total discharge, < six hours. 17. Charging temperature range +3 degrees C to + 40 degrees C. 18. Sensor: 5 Hz natural frequency: a. Distortion: , 0.1% at 12Hz ( 0 to 10 degrees) b. Damping: 0.7. c. Sensitivity: less than 77V/m/s or less. 19. Battery charging rack. 20. Data download rack. 21. The computer server will be purchased separately. 22. Programming/download software included. The purpose of this notice is to determine interest and capability of potential sources. The NAICS is 334519, Other Measuring and Controlling Device Manufacturing, 500 Employees. Interested parties will submit an email detailing their capabilities and experience with these products. Sufficient information must be provided to demonstrate the ability to complete the requirement. This is not a request for quotation or an announcement of a solicitation. Responses will be used for market research only. Responses are due no later than 03/11/2019 1300 EDT. Response must be submitted to Stewart Evans by email at contact@example.gov. Responses shall only be accepted through electronic mail addressed to contact@example.gov. All response documents required by this sources sought must be uploaded and received in their entirety no later than 03/11/2019. Responses submitted by hardcopy or the FedConnect web portal or Fed Connect Message Center shall not be accepted or considered. Place of Delivery: Menlo Park, CA 94025.