70 -- Hewlett Packard (Refurbished) and Motorola (Refurbished) Circuit Card Assemblies

Amendment 0006 EFFECTIVE 04/24/2014 The purpose of this amendment is to incorporate questions and answers 2-5. Question 2: Is the MVME167PA-36SE Still acceptable or will the buyer only accept the Non "A" version? Answer 2: Non "A" version Question 3: I do have one question regarding ITEM 004. I have attached the manual for the MVME 167p. In the past, SPAWAR has used most of the MVME 167X- 34SE or 34B boards with either 16mb or 32mb or Dram memory. In the attacfhed reference manual section 5.1 indicates the various memory levels available for the 167P series, and I wanted to make sure the amount of memory RB Enterprises offers meets the requirements of SPAWAR. Answer 3: MVME 167P-036SE is good. Question4: Why has the "A" been removed from PN: MVME167PA-36SE and what is the technical reason for this? Answer 4: Our technical documentation has the PN's listed: MVME167P- 36SE/MVME167P-34SE. Question 5: Why has line item 0004 been changed from a MVME167P-34SE to a MVME167P-36SE? On both of these changes we would like to know if these changed were instituted for technical requirements or for competitive pricing benefits? Answer 5: This was changed to match the description for line item 0005. 'designed to interface with Motorola MVME-167P-36SE processor'. The solicitation closing date remains 4/30/2014 at 12:00 PM PST. **************************************************************** Amendment 0005 EFFECTIVE 04/23/2014 The purpose of this amendment is as follows: 1-To incorporate the following question and answer pertaining to CLIN 0001. Question 1: I believe Line item #1 requires further description/clarification as follows: You indicated to me that your customer wants optional on board graphics, option#120 ( versus no graphics, which is a much lower cost item), Therefore, the description should include the terminology "with optional on board graphics". As it now stands, most bidders will be quoting this item without graphics at lower costs. Thus, the full part number should be A4511A-A4500-66016, Option120. This HP number fully describes your required configuration and also coincides with past government procurements. By encompassing the above, the playing field becomes even. As it now stands you would possibly be getting bids both ways. Answer 1: Item 0001 does not need to be changed. We wanted the memory module and bridge adapter, which is listed as Item 0002 and 0003. The only changes that need to be made are to Item 0004, and removing the "A" on Item 0050 description on the attached PDF. 2-The solicitation closing date has been extended to 4/30/2014 at 12:00 PM PST. **************************************************************** Amendment 0004 EFFECTIVE 04/22/2014 @ 4:00PM PST The purpose of this amendment is to amend Line Item 0004: Line Item 0004 is being amended from MVME167P-34SE to MVME167P-36SE. **************************************************************** Amendment 0003 EFFECTIVE 04/22/2014 The purpose of this amendment is to amend Line Items 0004 and 0005: Line Item 0004 is being amended from MVME167PA-34SE to MVME167P-34SE. Line Item 0005 is being amended from being designed to interface with MVME- 167PA- 36SE to designed to interface with MVME-167P-36SE. **************************************************************** Amendment 0002 Effective 4/15/2014 The purpose of this amendment is to correct the part number in Line Item 0001 from A4449A to A4511A and to correct line item 0003 and 0004 from (NEW) to (REFURBISHED). The solicitation has been extended to 4/21/2014 at 12:00 PM PST. **************************************************************** Amendment 0001 Effective 4/9/2014 The purpose of this amendment is to correct the solicitation within the body of the solicitation to N66001-14-T-7432. **************************************************************** This is a SSC Pacific combined synopsis/solicitation for commercial items prepared in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items and FAR Part 13, Simplified Acquisition Procedures. This announcement constitutes only the solicitation. Competitive quotes are being requested under N66001-14-T-7432. This requirement is set-aside for small businesses, NAICS code is 334418 and the size standard is 500 employees. Quote Brand NameDo Not Substitute Item 0001, HP 744/165L CPU A4449A(REFURBISHED),opt.120 Part Number:A4449A the 744/165L CPU is a VME type processor circuit card assembly (CCA). +5VDC, +/- 12VDC operating voltages. Dimensions must be 6U HIGH, single wide VME CCA, With 2 Year Warranty, Qty 4 Each. Item 0002, HP 128MB A4449A Memory Module (REFURBISHED) Part Number:A4449A , 128MB Memory Module, With 2 Year Warranty, Qty 4 Each. Item 0003, HP PMC Bridge Adapter (REFURBISHED) A4504A Part Number:A4504A, With 2 Year Warranty, Qty: 4 Each Item 0004, Motorola MVME167PA-34SE CPU Processor Cards (NEW). Part Number:MVME167PA- 34SE, With 2 Year Warranty, Qty: 4 Each Item 0005, Motorola I/O MVME 712M Cards (NEW). Part Number:MVME712M Motorola Input/Output Circuit Card Assembly(CCA). Double Wide 6U High VME Type Card. I/O Cicrcuit Card Assembly(CCA) Card with DB-25 type connectors on front panel designed to interface with Motorola MVME-167PA-36SE processor. Uses +5VDC and +/- 12VDC operating voltages, With 2 Year Warranty, Qty: 4 Each Note: UID Labels are required on all equipment with a unit cost of $5,000 or more per DFARS +1 (555) 000-0000, Item Identification & Valuation. If there is a cost for the UID Label, please quote a separate line item. "The statement below applies to CLINS 0004, 0005 To be considered for award, the offeror certifies that the product(s) being offered is an original, new and Trade Agreements Act (TAA) compliant product, and that the subject products are eligible for all manufacturer warranties and other ancillary services or options provided by the manufacturer. Offeror further certifies that it is authorized by the manufacturer to sell the products that are the subject of this action in the US (i.e., that the products are TAA compliant and that the offeror is authorized to sell them in the US). Offerors are required to submit documentation with the offer identifying its supply chain for the product, and certifying that all products are new, TAA compliant, and in their original packaging. By making an offer, offeror also consents to no cost cancellation of the non-compliant awarded items if, upon inspection after delivery, any products provided are not recognized or acknowledged by the manufacturer as new and original products that are eligible for warranties and all other ancillary services or options provided by the manufacturer or that offeror was not authorized by the manufacturer to sell the product in the US, or that the product is in some manner not TAA compliant. " Basis for award: The government anticipates awarding a firm-fixed price purchase order and it will be based on the lowest technically acceptable quote. Quotes will be evaluated on an "all or none" basis. This solicitation document incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-72 (01/30/2014) and Defense Federal Acquisition Regulation Supplement (DFARS), March 31, 2014. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses can be accessed in full text at www.farsite.hill.af.mil. FAR Clause at 52.212-1, Instructions to Offerors Commercial, and 52.212-4, Contract Terms and Conditions Commercial Items, incorporated by reference, applies to this acquisition. FAR Clause 52.212-3, Offeror Representations and Certifications -- Commercial Items and DFARS 252.212-7000 Offeror Representations and Certifications--Commercial Items applies to this acquisition in e-Commerce. FAR Clause 52.212-5-Contract Terms and Conditions Required to Implement Statutes or Executive Orders, 52.211-6, Brand Name or Equal, 52.219-6, Notice of Total Small Business Set-Aside, 52.222-3, Convict Labor (E.O. 11755), 52.222-19, Child Labor Cooperation with Authorities and Remedies (E.O. 13126), 52.222-21, Prohibition of Segregated Facilities (Feb 1999), 52.222-26, Equal Opportunity (E.O. 11246), 52.225-13, Restrictions on Certain Foreign Purchases (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury), 52.232-33, Payment by Electronic Funds TransferCentral Contractor Registration (31 U.S.C. 3332), 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive OrdersCommercial Items (Deviation) also applies to this acquisition, 52.204-99, System for Award Management Registration (Deviation), 52.222-36, Affirmative Action for Workers with Disabilities, 52.204- 2, Security Requirements, DFARS 252.209-7998, Representation Regarding Conviction of a Felony Criminal Violation under any Federal or State Law, DFARS 252.211- 7003, Item Unique Identification and Valuation. This RFQ closes on April 17, 2014 at 12:00 PM, Pacific Standard Time (PST). Quotes uploaded on the SPAWAR e-commerce website at https://e- commerce.sscno.nmci.navy.mil under SSC Pacific/Simplified Acquisitions/N66001-14-T-7432. The point of contact for this solicitation is Shawna Nevins at contact@example.gov. Please include RFQ N66001-14-T-7432 on all inquiries. All responding vendors must have a completed registration in the System for Award Management (SAM) program prior to award of contract. Information to register in SAM can be found at: https://www.sam.gov/portal/public/SAM/. Complete SAM registration means a registered DUNS and CAGE Code numbers.