Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

70--RTM, ADLINK COMPATI

Active
N0010426QUC19Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Government is seeking a sole-source contract for a specialized component identified by NSN 1H-7010-016671872, titled 70--RTM, ADLINK COMPATI, under solicitation number N0010426QUC19, with a proposed delivery to W25G1U, W1A8 DLA DISTRIBUTION in New Cumberland, PA. Due to the unique nature of the part, the Government does not own the technical data or intellectual property rights required to source the item from alternative suppliers, and both acquiring the data and reverse engineering the component have been deemed uneconomical. The solicitation is issued under FAR 6.302-1, allowing for noncompetitive negotiation with a single source, though all responsible parties may submit capability statements within 45 days of the notice, or 30 days if under an existing Basic Ordering Agreement. The award will be contingent upon the offeror, product, or manufacturer meeting all qualification standards at the time of contract award, as specified in FAR clause 52.209-1. Technical specifications and military standards referenced in the procurement may be obtained through ASSIST-Online or the DODSSP, but design documents such as drawings or deviation lists are not available through these channels. This acquisition is designated as a Small Business Set Aside, Total, and the Government is not applying FAR Part 12 commercial item acquisition policies; however, interested parties may still propose commercial alternatives within 15 days of the notice. Primary contact for inquiries is Leigh E. Catchings at NAVSUP Weapon Systems Support Mech in Mechanicsburg, PA.

General Info

Sole-source contract for specialized 70--RTM component under FAR 6.302-1, small business set aside, no competitive bidding due to unique specifications.

Agency

Department Of Defense → Navsup Weapon Systems Support MechView Agency

NAICS

339994 - Broom, Brush, and Mop ManufacturingView NAICS

Place of Performance

PA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech
Contacts1 person available
OfficeMECHANICSBURG, PA, 17050-0788, USA
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support Mech
View Agency Profile
Office AddressMECHANICSBURG, PA, 17050-0788, USA
Contacts
LEIGH E. CATCHINGS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
NSN 1H-7010-016671872, TDP VER 001, REF NR USN18-9365, QTY 1 EA, DELIVER TO W25G1U, W1A8 DLA DISTRIBUTION, NEW CUMBERLAND, PA 17070-5002. The Government does not own the data or the rights to the data needed to purchase / contract repair of this part from additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. Interested parties may obtain copies of Military and Federal Specifications and Standards, Qualified Products Lists (QPLs), Qualified Product Databases (QPDs), Military Handbooks, and other standardized documents from the DoD Single Stock Point (DODSSP) at Document Automation and Production Service (DAPS) in Philadelphia, PA. NOTE: Patterns, Drawings, Deviation Lists, Purchase Descriptions, etc. are NOT stocked at DODSSP. Most documents are available in Adobe PDF format from ASSIST-Online at: http://quicksearch.dla.mil/. Users may use ASSIST-Quick Search to search for and download available documents directly using standard browser software. Documents that are not available for downloading from ASSIST-Quick Search can be ordered from the DODSSP website using the ASSIST Shopping Wizard after obtaining a DODSSP Customer Account by following the registration procedures. Users who do not have access to the internet may contact the DODSSP ASSIST Help Desk at 215-697-2667 or 215-697-2179(DSN: 442-2667), or mail their requestDLA Document Services, Bldg. 4/D, 700 Robbins Avenue, Philadelphia PA 19111-5094. The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source under the authority of FAR 6.302-1. All responsible sources may identify their interest and capability to respond to the requirement or submit proposals, quotations or capability statements. This notice of intent is not a request for competitive proposals. However, all proposals received within 45 days (30 days if award is issued under an existing Basic Ordering Agreement (BOA) after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete with this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Award will be made only if the offeror, the product/service, or the manufacturer meets the qualification requirement(s) at time of award, in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements and is cited in each individual solicitation. Based upon market research, the Government is not using the policies contained in FAR Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice.

Similar Contracts

Same NAICS industry code

NAICS: 339994
New
DIBBS
BRUSH, PAINT
Solicitation # SPE8E7-26-T-3465
The contract solicits 5,004 high-grade synthetic filament paint brushes in size 3, meeting Commercial Item Description A-A-3192A dated April 28, 2010, with specified dimensions of 3.187 inches in brush part length and 1.000 inch in thickness. The item is identified by NSN 8020-00-245-4517 and is subject to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements. Delivery is required within 64 days of order receipt, with FOB Origin terms, and all units must be shipped to the DLA Distribution facility at New Cumberland, Pennsylvania. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129, including palletization per DLA Packaging Requirements. The contract is a Fixed Price type, with no quantity variance allowed, and inspection and acceptance occur at the destination. All offers must be submitted via DIBBS by August 17, 2026, and the acquisition is a total small business set-aside under NAICS code 339994. Offerors must ensure compliance with safety data sheet submission requirements and are prohibited from using additive manufacturing unless specifically authorized. The contract incorporates numerous FAR and DFARS clauses governing cybersecurity, hazardous materials, whistleblower rights, contract modifications, electronic invoicing via WAWF, and restrictions on procurement of covered defense telecommunications equipment. Contractors must maintain current representations in SAM and comply with labeling standards under the Hazard Communication Standard and other applicable federal regulations. The successful offeror will be subject to NIST SP 800-171 assessment requirements and is bound by provisions prohibiting hexavalent chromium and the use of mandatory arbitration agreements. Payment instructions require WAWF electronic submission, with invoice and receiving report formats determined by the Contracting Officer.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339994
New
DIBBS
CLOTH, CLEANING
Solicitation # SPE8E5-26-T-3752
The contract pertains to the procurement of cleaning cloths designated by part number 599306 and NSN 7920-01-614-3522, with a unit of issue of one box containing 100 items. Delivery is required within 20 days FOB destination, with no tolerance for quantity variance, and acceptance occurs at the delivery point. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking for Type II shelf-life items, and palletization must adhere to DLA packaging requirements. The item has a 12-month extendable shelf life per RS001, and all packaging and shipping must meet hazardous materials protocols. The delivery destination is AECOM HMMC Okinawa at Camp Kinser, FPO AP 96375, with parallel freight shipping instructions to the same location under JP address details. The contract is governed by DLA technical and quality specifications referenced in the DLA Master List, and the solicitation number SPE8E5-26-T-3752 is valid with a response deadline of August 14, 2026, and an original required delivery date of August 4, 2026. The procurement is under the NAICS code 339994 and managed by the Defense Logistics Agency.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 339994
New
DIBBS
Supply of Stretch Vascular Grafts (6mm ID, 60cm)The contract requires the supply and delivery of four stretch vascular grafts, each with a 6mm internal diameter and 60cm length, to be packaged and labeled in compliance with regulatory and operational standards, including appropriate shipping protocols to ensure product integrity. The delivery destination is Fort Bragg, North Carolina, with the zip code 28310, and all logistics must align with military medical supply chain requirements. The solicitation, issued under the NAICS code 339994 for other medical device manufacturing, is structured as a subcontract and falls under the jurisdiction of the Department of Defense through the Medical Supply Chain MD Surg FSF. Bids must be submitted by August 10, 2026, with the opportunity posted on August 2, 2026, through the DIBBS platform for vendor access and response submission.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 339994
New
SLED
ELECTION SECURITY SEALS (PULL-TIGHT, PADLOCK, & CABLE), TAMPER EVIDENT LABELS, AND MISC. ELECTION SUPPLIES
Solicitation # 031-3085102-JM
The County of Orange is seeking vendors to supply election security seals including pull-tight, padlock, and cable varieties, along with tamper-evident labels and other miscellaneous election supplies. The solicitation, identified as 031-3085102-JM, has a closing date of August 6, 2026, at 2:00 PM Pacific Time, and all bids must be submitted through the designated third-party procurement portal. The place of performance is specified as Santa Ana, California, with a zip code of 92705, and the contracting officer for the opportunity is listed as lpalmer@biddingo.com. Vendors are required to register on the external website to access full bid documents and are responsible for reviewing all addenda, as updates may be posted without notice. The contract is open to any qualified supplier, with no set-aside designation indicated, and bidders must ensure they meet all technical and administrative requirements outlined in the official documentation accessed via the provided link.
County of Orange

POSTED

6 days ago

DEADLINE

in about 20 hours
View Details
NAICS: 339994
New
DIBBS
BRUSH, CLEANING, SMALL A
Solicitation # SPE7L3-26-Q-1235
The contract specifies the procurement of 1,377 cleaning brushes with part number 1005-00-690-3115 under solicitation SPE7L3-26-Q-1235, with a delivery deadline of 258 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the acquisition type and timing. The item is classified as a small arms component requiring demilitarization per Category I Munitions List standards. Contractors must comply with Cybersecurity Maturity Model Certification Level 2, either through self-assessment or third-party certification. Packaging must adhere to DLA packaging standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposals and variance requests. Inspection and acceptance occur at the manufacturer’s origin, and non-accepted supplies must have all government identification removed. Only components listed on approved Qualified Products Lists or Qualified Manufacturers Lists are acceptable. Physical identification of the item must meet bare item marking standards, though unique identification is not mandated. Technical data associated with this item is controlled under ITAR or EAR regulations; export or disclosure to foreign persons—regardless of location—is prohibited without prior authorization, and access is restricted to contractors who hold valid US/Canada JCP certification, have completed required DOD export training, and are approved by DLA. The place of performance is New Cumberland, Pennsylvania, and inquiries should be directed to Katelyn Young at the provided contact details.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

6 days ago

DEADLINE

in 4 days
View Details
NAICS: 339994
New
Federal
Floor Scrubbers
Solicitation # W911S226U3895
The contract titled Floor Scrubbers is a Small Business Set Aside solicitation issued by the Department of Defense under the office of W6QM Micc-Ft Drum, with the solicitation number W911S26U3895. It was posted on July 30, 2026, and bids must be submitted by August 6, 2026, at 4:10 PM Eastern Time. The North American Industry Classification System code 339994 identifies this as an order for other miscellaneous manufacturing, specifically targeting floor scrubbers, with performance expected at a location with a ZIP code of 54656. The procurement is exclusively reserved for small businesses as defined by the Small Business Administration, ensuring only eligible small entities may respond. Point of contact for inquiries is Troy Boardman, reachable at 502-898-0312 or troy.a.boardman.civ@army.mil, and the opportunity can be viewed online through the SAM.gov platform.
W6QM Micc-Ft Drum

POSTED

7 days ago

DEADLINE

in about 15 hours
View Details
NAICS: 339994
SLED
Vision and Eyewear ServicesThe contract titled Vision and Eyewear Services requires the provision of comprehensive vision evaluations, prescription and fitting of eyewear, and the repair or replacement of damaged vision aids. It is structured as a subcontract under the Vocational Rehabilitation agency in Massachusetts, with performance to be conducted at a location in Boston, identified by the zip code 02019. The solicitation was posted on July 29, 2026, and responses are due by September 14, 2026, at 9:00 PM. The North American Industry Classification System code 339994 applies, indicating the focus on other miscellaneous manufacturing related to medical and optical devices. There is no specified set-aside type or organization type, and no point of contact information is provided.履约地点明确在波士顿，合同未指定其他行政或地理细节。
VR - Vocational Rehabilitation

POSTED

7 days ago

DEADLINE

in about 1 month
View Details
NAICS: 339994
DIBBS
FLASHLIGHT, LAZERBRI
Solicitation # SPE8E7-26-Q-0274
The contract pertains to the procurement of one box containing twelve LazerBrite model LB2-105-12B flashlights, identified by NSN 6230-01-505-5272, under solicitation SPE8E7-26-Q-0274. The supplier, Tactical Lighting Solutions LLC, is required to deliver the items in strict compliance with DLA packaging standards outlined in RP001, including adherence to MIL-STD-129 for marking and labeling, and commercial packaging per ASTM D3951 unless federal hazardous material standards under FED-STD-313 apply, in which case TQ requirement IP025 governs. All technical and quality requirements referenced by R or I numbers are sourced from the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting commercial standards. The contract enforces a firm fixed price with zero tolerance for quantity variance, and delivery must occur within 30 days after award, with both inspection and acceptance points at the destination. Shipment is to be routed to the USS RAFAEL PERALTA DDG 115 via FPO AP 96694-1500, and transportation procedures must follow DLAD PROC NOTES C19 and C20. The item is covered under DLA’s procurement framework, with controlled access to covered defense information, and pricing, delivery, and compliance terms are binding with no flexibility.
Defense Logistics Agency

POSTED

7 days ago

DEADLINE

in about 3 hours
View Details
NAICS: 339994
DIBBS
CLOTH, CLEANING
Solicitation # SPE8E5-26-T-3726
The contract is for the procurement of 1 box of cleaning cloths with NSN 7920-01-614-3522 and part number 599306, issued by the Defense Logistics Agency under solicitation SPE8E5-26-T-3726. The unit of issue is a box containing 100 cloths, with delivery required within 20 days to the Marine Corps Air Facility in Quantico, Virginia, under FOB origin terms and no tolerance for quantity variance. The item is classified as a Type 2 shelf life item with a 12-month extendable lifespan, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements including marking per MIL-STD-129 with special shelf life code 33. Packaging and shipping must adhere to traceable methods only, prohibiting parcel post, and must follow hazardous materials handling procedures. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and the revision in effect at the RFP issue date applies. The item is subject to Covered Defense Information controls and government identification removal for non-accepted supplies. The delivery point is destination, with inspection and acceptance also occurring at destination. The required delivery date is July 30, 2026, and the contract includes specific shipping instructions, a designated point of contact, and federal accounting details for HMX-1 supply operations.
Defense Logistics Agency

POSTED

7 days ago

DEADLINE

in 5 days
View Details
NAICS: 339994
DIBBS
Nonmetallic Grommet Manufacturing and SupplyThe contract entails the manufacture and supply of 27 nonmetallic grommets identified by NSN 5325-01-728-9567, with all items required to meet the stringent technical, quality, packaging, and traceability standards established by the Defense Logistics Agency. The product is classified as a Critical Application Item, meaning strict compliance with specifications is mandatory to ensure operational reliability and safety in mission-critical environments. Production must adhere to all applicable DLA requirements without deviation, and full traceability of materials and manufacturing processes is expected throughout the supply chain. This subcontract, issued under NAICS code 339994, is managed by the Department of Defense through the Defense Logistics Agency. The solicitation was posted on July 28, 2026, and performance is expected to be executed in alignment with federal defense supply protocols. Although specific location details for the place of performance or point of contact are not provided, the contractual obligations are binding and must be fulfilled to fulfill Defense Logistics Agency’s procurement requirements for components essential to defense systems.
Defense Logistics Agency

POSTED

8 days ago

DEADLINE

N/A
View Details
NAICS: 339994
DIBBS
MOUNTING KIT, BODY, V
Solicitation # SPE7L3-26-T-134L
The contract pertains to the procurement of four MOUNTING KITS, BODY, V, identified by NSN 2510-99-464-2470, issued by the Defense Logistics Agency under solicitation SPE7L3-26-T-134L. The solicitation was posted on July 26, 2026, with responses due by August 6, 2026, and is structured as a fixed-price acquisition under NAICS code 339994. Deliveries are required to be made to the DLA Distribution facility at New Cumberland, PA, with a strict delivery deadline of 165 days after award, corresponding to December 8, 2026, and a need ship date of January 19, 2027. Inspection and acceptance are to occur at destination, governed by FAR 52.246-2, with the Government assuming full responsibility for evaluating conformance upon receipt. The kits must be individually packaged in compliance with MIL-STD-2073-1, Appendix D, using Packaging Code Z and special preservation methods designated as ZZ, validated per ASTM D4169 Distribution Cycle 18, Assurance Level II. Palletization must adhere to DLA’s RP001 requirements, and each unit must include an internal parts list and, if applicable, assembly instructions. All containers must be marked and bar-coded strictly per MIL-STD-129, including special segregation and identification for Code ZZ items. The contract imposes stringent regulatory and compliance obligations under both FAR and DFARS, including mandatory clauses on equal opportunity, combating trafficking in persons, employment eligibility verification, sustainable products, cybersecurity safeguards, subcontracting, and whistleblower protections. Specific DFARS clauses require adherence to NIST SP 800-171 for safeguarding controlled unclassified information, along with reporting of cyber incidents under 252.204-7012 and prohibitions on covered defense telecommunications equipment under 252.204-7018. Transportation by sea must follow 252.247-7023, and hazardous materials, if present, must be labeled per OSHA’s Hazard Communication Standard. Invoicing is exclusively conducted via the Wide Area WorkFlow system, with payment administration details to be confirmed in the resulting award. Offerors must self-certify their small business status,
Defense Logistics Agency

POSTED

10 days ago

DEADLINE

in 1 day
View Details
NAICS: 339994
DIBBS
LEVER, REMOTE CONTROL
Solicitation # SPE7M4-26-T-286Q
The contract solicitation SPE7M4-26-T-286Q calls for the procurement of five remote control levers identified by NSN 1680-01-391-1748, with a required delivery date of June 22, 2027 and a need ship date of January 19, 2027, allowing for a 165-day lead time after order placement. The item is to be delivered FOB destination to Hill Air Force Base, Utah, under a firm-fixed-price structure inferred from referenced contract clauses, though the contract type is not explicitly stated. No pricing details are provided in the available documentation, leaving the estimated contract value undetermined. All deliveries must comply with stringent packaging and labeling standards, including adherence to MIL-STD-129 for marking and barcoding, ASTM D3951 for commercial packaging, and DLA’s RP001 for palletization, with DLA’s Master List of Technical and Quality Requirements (RA001) taking precedence over all other standards. Hazardous materials, if present, must be labeled in accordance with OSHA’s Hazard Communication Standard and exempt regulations, and all packaging must include safety data sheets submitted as required. The solicitation mandates full compliance with a broad suite of federal and defense-specific clauses covering labor, cybersecurity, environmental safety, and procurement integrity. Key requirements include adherence to the Combating Trafficking in Persons clause, Employment Eligibility Verification, Sustainable Products, and the Safeguarding of Covered Defense Information and Cyber Incident Reporting standards, reflecting CMMC Level 2 expectations. Contractors must affirm their small business status and provide Unique Entity ID and CAGE codes if supplying covered defense telecommunications equipment, with joint ventures subject to additional partner disclosures. Electronic submission through DIBBS is mandatory by August 6, 2026, with payment processed exclusively via Wide Area WorkFlow using accepted document types including invoices and receiving reports. Inspection and acceptance occur at the destination by government personnel under FAR 52.246-2, and all technical and quality assurance expectations are governed by the DLA Master List. The absence of an explicit Section M evaluation factors section means the basis of award—whether LPTA or trade-off—is not discernible from the available data, though compliance with all technical, safety, and regulatory requirements is foundational to consideration.
Defense Logistics Agency

POSTED

10 days ago

DEADLINE

in about 20 hours
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

NAICS: 332919
New
Federal
FLANGE,4",WN,SCH40
Solicitation # N0010426QED05
This contract pertains to the procurement of a 4-inch weld-neck flange with schedule 40 specifications under solicitation N0010426QED05, issued by the Naval Supply Systems Command Weapon Systems Support Mechanism. The contract mandates strict compliance with technical, quality, and packaging requirements governed by the Individual Repair Part Ordering Data (IRPOD), which takes precedence over other documents in case of conflict, followed by the schedule, terms and conditions, and referenced military specifications. Contractors must adhere to all cited revision levels of drawings and standards, and any deviation or waiver must be formally requested with detailed justification, including evidence that proposed changes will not affect the form, fit, or function of the part. Mercury or mercury-containing compounds are strictly prohibited from contact with supplied hardware. All inspection and test reports must be submitted electronically via Wide Area Workflow (WAWF), and pre-manufacturing procedures, drawings, and qualifying documentation must be submitted within 45 days of contract award to the designated contracting office. Packaging must comply with MIL-PRF-23199, particularly concerning cleanliness control requirements, and the use of MIL-DTL-24466 green poly bags is permitted only under specific conditions outlined in the IRPOD. The contract enforces mandatory cybersecurity maturity model certification, small business representation, and equal opportunity requirements for veterans and workers with disabilities. All contractual documents are considered issued upon electronic transmission, and pricing validity is set at 60 days unless otherwise specified. Technical data, including drawings and specifications, are marked NOFORN and subject to export control with prior approval from the Naval Sea Systems Command for any transmission to foreign nationals. Distribution of deliverables follows strict DoD distribution statement codes, particularly F, restricting release without explicit authorization. Contractors must submit separate packages for each contract line item, including certified reports of test and inspection and pre-manufacturing documentation per DI-QCIC-8871 and DI-QCIC-8872 standards. The place of performance is not specified, and the point of contact for inquiries is listed as a Navy procurement representative. The contract requires compliance with priority rating provisions for national defense and energy programs, and all submissions are governed by detailed formatting and submission guidelines outlined in DD Form 1423 instructions, including data item descriptions, approval codes, and delivery frequencies.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 30 days
View Details
NAICS: 333618
New
Federal
SENSOR ASSY, ESM
Solicitation # N0010426QQC34
This contract solicitation, issued under Emergency Acquisition Authority, seeks repair services for the SENSOR ASSY, ESM under a firm-fixed-price arrangement with a required Repair Turnaround Time of 59 days, measured from the physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility system. All repairs must comply with the original manufacturer’s technical specifications and drawings, and are subject to Government Source Inspection. The contractor is required to adhere to MIL-STD-130 Rev N for marking, and any design, material, or part number changes beyond a Code 1 modification must receive prior written approval from the Naval Integrated Contracting Center. The contract mandates strict quality assurance procedures, including comprehensive inspection records retained for 365 days post-delivery, and imposes financial penalties per unit per month for delays beyond the agreed RTAT, up to a specified maximum, without limiting the Government’s right to terminate for default. Freight is FOB Origin and managed by the Navy under the Commercial Asset Visibility Statement of Work. The solicitation requires detailed pricing submission with unit and total repair costs, and if pricing deviates from historical levels, contractors must justify their rates and provide comparable invoices or NSNs for similar items. A T&E fee may be negotiated if the asset is deemed beyond repair, capped at a government-determined NTE amount. The contract includes an optional quantity increase provision, exercisable within the timeframe of FAR 52.217-6, and enforces Small Business Subcontracting Plan requirements. Contractors must prove authorization as a distributor of the original manufacturer’s item, and the award is bilateral, requiring explicit acceptance before execution. The item falls under NAICS code 333618 and is governed by multiple federal acquisition regulations, cybersecurity maturity certifications, and security exclusions, with all applicable documentation subject to strict distribution controls and official-use-only handling protocols.
Other Engine Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334417
New
Federal
SWITCH CONNECT ASSY
Solicitation # N0010426QEC97
The procurement pertains to the SWITCH CONNECT ASSY with solicitation number N0010426QEC97, issued by the Navsup Weapon Systems Support Mech under the Department of Defense, with responses due by September 4, 2026. The contract mandates strict compliance with the Individual Repair Part Ordering Data (IRPOD), which is mandatory for vendor review and serves as the primary technical reference. Technical documentation, including drawings, specifications, and STRs, must be obtained from the BPMI e-Commerce portal using pre-registered credentials, and all cited documents must be used in their entirety at the specified revision levels unless formal approval is granted to deviate. Order of precedence is clearly defined, with contract amendments and schedule provisions taking priority over referenced standards. All items must adhere to cleanliness controls as outlined in MIL-STD-767, MIL-STD-2041, and related directives, with packaging governed by MIL-PRF-23199 where applicable; use of MIL-DTL-24466 green poly bags is conditional on specific cleanliness requirements and cannot override contract-specified alternatives. Mercury or mercury-containing compounds are strictly prohibited in contact with delivered hardware. Quality assurance obligations are governed by the IRPOD, requiring contractors to maintain and make available all inspection records to the government throughout contract performance and beyond. The contract includes mandatory compliance with cybersecurity maturity model certification, veteran and disability Equal Opportunity provisions, small business program representations, and the annual representations and certifications deviation, all effective February 2026. A stop-work order clause, security prohibitions, and export controls are invoked with a NOFORN designation on all technical documents, requiring prior approval from the Naval Sea Systems Command for any transmission to foreign nationals. Delivery is governed by FOB destination terms, pricing is valid for 60 days after the closing date unless otherwise specified, and contractual documents are deemed issued upon electronic transmission. The material must be delivered with a Certificate of Compliance per DI-MISC-81356, submitted at the time of delivery for each unique contract line item. Technical data deliverables are specified via DD Form 1423 with detailed requirements for submission frequency, approval codes, distribution statements, and pricing groups aligned with DoD guidelines. All communications and documentation must flow through designated points of contact, and any deviation, waiver, or request for extension must include justification and supporting technical data, submitted initially to the Government Quality Assurance Representative for review and forwarding to the Post
Electronic Connector Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 30 days
View Details
New
Federal
59--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QDB44
The contract pertains to the procurement of two circuit card assemblies identified by NSN 7H-5998-012568665-GL and part number 6710074-1, with a total quantity of 29 units to be delivered to two DLA distribution centers in New Cumberland, Pennsylvania, and Tracy, California. The Government does not hold the intellectual property rights or technical data necessary to source repairs or replacements from alternative suppliers, and it has determined that acquiring such rights or reverse engineering the component is uneconomical, necessitating exclusive procurement from the original manufacturer. The solicitation is being conducted under FAR 6.302-1 as a sole-source action, with no obligation to compete, though responsible sources may submit capability statements to inform the Government's decision. The acquisition is structured as a Small Business Set Aside, with award contingent on the offeror, product, or manufacturer meeting all qualification criteria at the time of award as outlined in FAR 52.209-1. Technical specifications and standards referenced are accessible via ASSIST-Online or DODSSP, though drawings, patterns, and deviation lists are not available through these channels. The Government is not applying commercial items acquisition policies under FAR Part 12 but invites interested parties to propose commercial alternatives within 15 days. The acquisition is subject to trade agreements, including the Buy American Act—Free Trade Agreements and the World Trade Organization Government Procurement Agreement, as implemented through applicable DFARS clauses. The solicitation number is N0010426QDB44, issued by the Naval Supply Systems Command Weapon Systems Support, with responses due by September 8, 2026, and primary contact information provided for inquiries.

POSTED

about 13 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335312
New
Federal
PANEL,POWER DISTRIB
Solicitation # N0010426QND94
This contract involves the repair and quality assurance of the PANEL,POWER DISTRIB under emergency acquisition flexibilities, with a firm-fixed-price structure and a mandatory 180-day repair turn-around time (RTAT). Contractors must submit detailed quotes including teardown and evaluation costs, estimated new part pricing, and full repair cost breakdowns, with all repairs requiring final government inspection and acceptance within the stipulated RTAT. Failure to meet RTAT triggers per-unit price reductions and may result in termination for default. The work must adhere strictly to specified military standards including MIL-STD-130 for marking, MIL-STD-2073 for packaging, and the Defense Priorities and Allocations System (DPAS) rating, with no metallic mercury allowed unless written approval is granted, along with strict contamination controls and warning plates for approved exceptions. All repairs must be performed in line with approved technical documentation tied to specific CAGE codes and reference numbers, and any design, material, or part number changes require prior written approval from the contracting officer under specified Code classification systems. The contractor is fully responsible for quality assurance, record retention for 365 days post-delivery, and subcontractor compliance, including certification of authorized distributor status. Cybersecurity maturity thresholds apply, along with mandatory compliance with small business subcontracting, veteran and disability equity requirements, and Navy-specific workflow systems. Delivery to the Mechanicsburg, PA location is required, and all documentation must reflect NOFORN and distribution statement codes as mandated. Quotes must explicitly note any deviations from solicitation terms, and the award will be bilateral, contingent on written contractor acceptance following submission.
Motor and Generator Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 30 days
View Details
New
Federal
58--BLANKET,TYPE 6
Solicitation # N0010426RUC18
The contract is for the procurement of 70 units of a Type 6 Blanket with NSN 1H-5840-014379525-A5, to be delivered FOB origin, under a sole-source acquisition authorized by FAR 6.302-1 due to the specialized nature of the part. Engineering source approval is mandatory, as only the qualified source possesses the unique design capability, proprietary manufacturing knowledge, and technical data essential to maintaining the part's quality and performance. Alternate sources must undergo formal qualification through the design control activity and obtain approval from the cognizant Government engineering authority, ensuring that any replacement meets exacting standards. The Government does not have access to the underlying technical data or manufacturing processes, which are retained by the approved source and are not economically feasible to duplicate. The solicitation is non-competitive, but responsible parties may submit capability statements within 45 days of publication, or 30 days if an existing Basic Ordering Agreement applies, to demonstrate their ability to meet requirements. All award determinations are contingent on the offeror, product, or manufacturer meeting qualification criteria at the time of award per FAR clause 52.209-1. Commercial item policies under FAR Part 12 do not apply, though interested parties may indicate within 15 days if they can provide a commercial item that satisfies the requirement. Technical documentation such as drawings and specifications is not available through DODSSP but may be accessed via ASSIST-Online or requested through the DODSSP Help Desk. The activity is managed by the Navsup Weapon Systems Support Mechanic office in Mechanicsburg, PA, with Leigh E. Catchings as the primary point of contact.

POSTED

about 13 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332912
New
Federal
48--VALVE,SOLENOID, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QYAEU
The contract is for the procurement of three solenoid valves, NSN 7H-4810-015103809, model S9515-AL-MMA-010, designated as item 12 under the technical data package version 003, to be delivered to DLA Distribution Norfolk, Virginia. The Government does not hold the data or intellectual property rights necessary to source this part from alternative suppliers, and it has been determined that acquiring such rights or reverse engineering the component is uneconomical. This item is uniquely sourced, and no competing sources exist due to proprietary restrictions. The Government intends to award this contract on a sole-source basis under FAR 6.302-1, but responsible parties may still submit proposals, quotations, or capability statements within 45 days of the notice publication, or 30 days if under an existing Basic Ordering Agreement. All submissions will be evaluated solely to inform the decision on whether competitive procurement is feasible. Award will be contingent upon the offeror, product, or manufacturer meeting all qualification requirements at the time of award, as defined by FAR clause 52.209-1. The contracting office is Navsup Weapon Systems Support Mech located in Mechanicsburg, Pennsylvania, with Dianne Wydra as the primary point of contact. The solicitation is issued as a Small Business Set Aside under the SBA program, and any participant must qualify as a small business to be eligible. Access to military specifications and related standards is available through ASSIST-Online or DODSSP, though critical documents such as drawings and deviation lists are not available through these channels.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 13 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 335311
New
Federal
CABLE, MOTOR POWER
Solicitation # N0010426QNE05
This contract pertains to the manufacture of the CABLE, MOTOR POWER under solicitation N0010426QNE05, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, PA. The requirement is subject to Emergency Acquisition Flexibilities and will be awarded bilaterally, requiring the contractor’s written acceptance before execution. All contractual documents are considered issued upon electronic transmission, including email. The specification mandates compliance with drawing 8630046-2 and incorporates key military standards including MIL-STD-129 for marking, MIL-STD-973 for configuration control, and ISO 9001 for quality systems. The item must be mercury-free, with any use of metallic mercury requiring prior written approval and strict containment protocols to prevent contamination, particularly due to its corrosive and toxic risks in submarine and surface ship environments. Vendors must be certified under NAVSEA S9320-AM-PRO-020/MLDG, and each delivered assembly must include a certified Test Inspection Report. The contract imposes rigorous quality assurance obligations, requiring the contractor to maintain a government-acceptable quality system and assume full responsibility for inspection and compliance, regardless of whether government inspections are conducted. Inspection records must be retained for four years after final delivery. Packaging must follow MIL-STD-2073, and all subcontractors must adhere to the same requirements. The solicitation is set aside for small businesses and includes mandatory representations and certifications regarding veterans’ employment, workers with disabilities, Buy American provisions, and cybersecurity maturity levels. Payment will be processed via Wide Area Workflow with receiving report and invoice combo. The contractor must submit all configuration changes, deviations, or waivers through formal channels to the Contracting Officer, and unauthorized modifications are at the contractor’s sole risk. Offers are evaluated with consideration of past performance, and access to restricted documents requires authorization through designated government contacts. The response deadline is September 4, 2026.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332919
New
Federal
PORT ADAPTER TEE
Solicitation # N0010426QEC57
The contract pertains to the procurement of a Port Adapter Tee, identified by part number 6 AOG5JG5-M, manufactured by Parker Hannifin Corp (CAGE 30780), under solicitation N0010426QEC57 with a response deadline of September 4, 2026. The requirement stipulates strict adherence to specified design, material, and dimensional criteria, with no accompanying technical drawings or data beyond the part number, and mandates full compliance with referenced standards including MIL-PRF-23199 packaging specifications and the exclusion of mercury or mercury-containing compounds. The order of precedence for technical conflicts is clearly defined, prioritizing contract amendments and schedule provisions over internal standards and drawings. Contractors must comply with exact document revisions unless approved otherwise and are prohibited from mixing partial revisions; deviations or delays require detailed justification and prior written approval from the Contracting Officer, including evidence that any proposed changes do not compromise form, fit, function, or quality. The contract enforces rigorous quality assurance, requiring the contractor to maintain a government-acceptable inspection system with complete records available throughout performance and beyond. Packaging must conform to MIL-PRF-23199, with specific clarification that MIL-DTL-24466 green poly bags are only permissible when cleanliness controls from specified standards such as MIL-STD-767 or MIL-STD-2041 apply, and fire-retardant materials are no longer required. Compliance reporting mandates submission of a Certificate of Compliance per DI-MISC-81356 with each delivery, tied to the contract number, NSN, and item nomenclature. The procurement is subject to mandatory compliance with cybersecurity maturity model certification, small business representation, veteran and disability equal opportunity provisions, and national defense priority ratings. All contractual documents are deemed issued upon electronic transmission, pricing is valid for 60 days post-closing unless otherwise specified, and use of Wide Area Workflow Payment Instructions and Workflow Pro Assist Module is required. The place of performance is unspecified, but the awarding office is NAVSUP WSS-MECH, located in Mechanicsburg, PA, with Alexander E. Jones listed as the point of contact.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 30 days
View Details
NAICS: 811210
New
Federal
61--POWER SUPPLY, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QUC20
The contract pertains to a single unit of a power supply identified by NSN 7H-6130-015469882 and NIIN 7H-6130-015469882, with the part number 4801682, intended for repair or modification purposes. The item must be delivered to W62G2T, W1A8 DLA DIST SAN JOAQUIN in Tracy, California, with a delivery requirement for one unit. The Government does not hold the intellectual property rights or technical data necessary to procure or repair the part from alternative sources, and it has been deemed uneconomical to acquire such rights or to reverse engineer the component. This contract is being executed under FAR 6.302-1, limiting it to a single source due to the unique nature of the part and lack of data. Although the notice invites interested parties to submit proposals or capability statements within 45 days—30 days if awarded under an existing Basic Ordering Agreement—it is not a competitive solicitation. Any award will depend on the offeror, product, or manufacturer meeting all qualification criteria at the time of award, as stipulated in FAR clause 52.209-1. The Government has determined that commercial item acquisition policies under FAR Part 12 do not apply, but vendors may still propose commercial alternatives within 15 days of this notice. Technical documentation such as specifications and standards can be accessed through ASSIST-Online or DODSSP, though design files, drawings, and deviation lists are not available through these channels. The contracting office is located in Mechanicsburg, Pennsylvania, under the Naval Supply Systems Command Weapon Systems Support, with Leigh E. Catchings as the primary point of contact.
Electronic and Precision Equipment Repair and Maintenance

POSTED

about 13 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335311
New
Federal
SENSOR CABLE
Solicitation # N0010426QED00
The contract pertains to the procurement of a sensor cable identified by part number 07030417-21, furnished by DRS Training & Control Systems, LLC, under a fixed-price arrangement issued by NAVSUP Weapon Systems Support Mech. All technical requirements are fully captured by the part number and referenced ordering data, with no additional drawings or technical documentation provided. The supplier must comply with strict manufacturing, material, and dimensional specifications as outlined in the contract, including the complete exclusion of mercury or mercury-containing compounds. Quality assurance mandates that the contractor maintain an inspection system acceptable to the government, with full records preserved throughout performance and beyond. Packaging must conform to MIL-PRF-23199 and related standards, with specific clarification on the use of MIL-DTL-24466 green poly bags only when cleanliness controls from cited documents are invoked, and fire-retardant materials are no longer required. Delivery and compliance timelines are tied to the end of contract date, requiring a Certificate of Compliance per DI-MISC-81356 to be submitted with material delivery, ensuring each unique contract line item is documented separately. Pricing for the quotation is valid for 60 days post-closing unless otherwise specified, and all contractual documents are deemed issued upon electronic transmission, including email or fax. The contract incorporates numerous standardized clauses, including mandatory use of Workflow Pro, cybersecurity maturity certification requirements, small business representations, equal opportunity provisions for veterans and workers with disabilities, security exclusions, priority rating for national defense, and transportation by sea. Document conflict resolution follows a hierarchical order, with contract amendments superseding all other sources. Deviations or waivers must be formally requested in advance, supported by technical justification and impact assessments, and reviewed by the Government Quality Assurance Representative prior to approval. Commercial specifications referenced are obtained from external publishers, and all provided government documents include a distribution statement indicating usage limitations. Data submission requirements, as specified on DD Form 1423, define delivery frequency, approval codes, and pricing groups, with submission dates aligned to contract closure. The solicitation is open for response until September 4, 2026, with primary point of contact listed for inquiries.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 30 days
View Details
NAICS: 333613
New
Federal
SHAFT,SHOULDERED
Solicitation # N0010426QFA75
This contract solicitation (N00104-26-Q-FA75) issued by the Department of Defense through Navsup Weapon Systems Support targets the supply of a shoulder shaft component critical for naval shipboard systems. The material and workmanship involved are designated as Special Emphasis Material (Level I, Scope of Certification, or Quality Assured) due to their application in life-critical ship systems where failure could result in severe damage or loss of life. Consequently, the contract imposes stringent quality assurance, traceability, and certification requirements applicable from raw material sourcing and manufacturing processes through final delivery. Compliance with applicable military, federal, and commercial specifications and standards is mandatory, including reference to specific Navy drawings, welding and brazing procedures, thread inspection protocols, and traceability markings per MIL-STD-792 and associated Navy specifications. Certifications must accompany all material and fabrication processes, requiring submission through authorized electronic means (WAWF), with no shipment allowed prior to government acceptance. Inspection and acceptance will be performed by authorized government representatives either at the contractor’s facility or at the specified destination (Portsmouth Naval Shipyard, Kittery, ME), with detailed guidance on lot inspection, material verification, and non-destructive testing compliance provided in the contract. The contractor must maintain documented quality systems aligned with ISO 9001 and related calibration standards, along with robust supplier control and subcontractor evaluation programs. Packaging and marking requirements comply with MIL-STD-2073 and MIL-STD-129 to ensure safe transport, effective identification including Unique Item Identification (UII), and adherence to hazardous material regulations where applicable. Special contract clauses include provisions for small business set-asides, warranty of supplies, and adherence to Federal Acquisition Regulation (FAR) and Defense FAR Supplement (DFARS) requirements, including cybersecurity mandates for safeguarding controlled defense information. Award evaluation will emphasize past performance and price, with the government reserving the right to make a best-value determination based on these factors. The overall contract performance period is 365 days after receipt of order, with FOB destination delivery terms.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 13 days
View Details