Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on January 31, 2006. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

73--Food Preparation and Serving Equipment

Awarded
XXXXXXXXXXXXXFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333241
New
DIBBS
CONTROL, DAMPER, VENTILA
Solicitation # SPE3SE-27-T-0093
Solicitation SPE3SE-27-T-0093 is a request for quotations issued by the DLA Troop Support, Subsistence FSE Supply Chain for the procurement of two ventilator damper controls (NSN 7310-01-239-5565). The required hardware is specified as 440 volt AC, solenoid switch actuated, and thermostatically or manually operated. Delivery is required within 20 days after receipt of the order, with the destination for delivery and acceptance being the USNS Marie Tharp (T-AGS 66) at FPO AE 09578-4000. The contract mandates strict adherence to DLA packaging and marking standards, including ASTM D3951, MIL-STD-129, and RP001. Technical and quality requirements are governed by the DLA Master List (RA001), and the contractor must comply with RQ011 regarding the removal of government identification from non-accepted supplies. Special material restrictions apply, including the Buy American Act and a prohibition on the intentional addition of mercury or mercury-containing compounds, except where functionally required. Administrative requirements include electronic invoicing via the Wide Area WorkFlow (WAWF) system and submission of quotes through the DLA Internet Bid Board System (DIBBS). Evaluation will consider price, with a preference for HUBZone concerns, though alternate parts and surplus materials are generally not accepted. The procurement is categorized under NAICS code 333241 and incorporates various FAR and DFARS clauses regarding cybersecurity, hazardous material labeling, and the prohibition of covered defense telecommunications equipment.
SUBSISTENCE FSE SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 4 days

AI Contract Overview

Show more

This award notice pertains to a contract for food preparation and serving equipment issued by the Department of Defense through the Navsup Weapon Systems Support Mech. The procurement was managed by an office located in Mechanicsburg, Pennsylvania. The solicitation was posted on January 31, 2006, with a response deadline listed as January 30, 2006. No specific set-aside details or NAICS codes were provided in the contract data.

General Info

DoD contract for food preparation and serving equipment via Navsup Weapon Systems Support.

Contract Value

$35,118

NAICS

333241 - Food Product Machinery Manufacturing

Place of Performance

PA, USA

Set-Aside

NONE

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

1 update
PhaseAwarded
Posted

special-notice

Notice updated

Notice type changed from Special Notice to Presolicitation. The notice title changed. The notice description changed.

Type Changed

Presolicitation → Sources Sought

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech
ContactsNo contacts available
OfficeMECHANICSBURG, PA, 17050-0788, USA
Office AddressMECHANICSBURG, PA, 17050-0788, USA
ContactsNo contact information available

Full Description

Show more
NA A single Indefinite Delivery Indefinite Quantity (IDIQ) contract, anticipated to be Cost Plus Award Fee (CPAF). The contract will include provisions and clauses for both cost reimbursement and fixed price task orders. A contract is contemplated for perfo rmance of the full range of services in the country of Iraq, including but not limited to capability of furnishing and installing all travel, security, labor, equipment, materials, investigation, design, permits, environmental remediation, demolition, reha bilitation, new construction, supervision, testing, and incidental services to complete the design-build IDIQ work associated with communications projects. It is anticipated that task orders will be issued to design, demolish, rehabilitate, modernize, exp and, and construct critical communications infrastructure that supports the long tem economic vitality and enhanced security of the country. It is expected that the contractor shall be capable of supporting the work to include inspection, environmental re mediation, demolition, rehabilitation, modernization, expansion, new construction, warranty service, and operation, administration, and maintenance (OA&M) training as required for National communications infrastructure, network systems, IT systems, systems architecture, and operations as well as environmental mitigation. The anticipated contract will be a single award, IDIQ contract from which task orders will be placed on either a cost reimbursement or fixed price basis. A contract will be awarded with a base period and options. Based on current information, proposed projects may have a value up to $200,000,000.00. This synopsis and resultant procurement are a portion of the overall Iraqi Reconstruction program that incl udes: Electrical, Transportation, Communications, Public Buildings, Public Works Water / Wastewater, and Security projects. These other synopses are also being published today at http://www.fedbizopps.gov and http://www.rebuilding-iraq.net. Process. A key to ensuring timely review and evaluation of proposals is the use of staggered deadlines for the receipt of proposal information. In order to streamline the proposal evaluation process, offerors will be required to submit preliminary financial, past pe rformance/experience, and organizational/team structure information shortly after formal RFP release. This information will be reviewed to make a preliminary determination as to whether an offeror has a reasonable chance of contract award. Offerors deeme d as lacking the necessary capabilities will be advised accordingly. The purpose of this advice is to help these offerors avoid expenses associated with preparation of a full proposal. Complete past performance information will be due shortly after Reque st for Proposals release. This procurement will utilize the Best Value trade-off process with consideration being given to Technical, Past Performance, and Cost factors. The minimum standard for construction will be based on the 2000 Edition of the Inter national Building Codes for the European Community and related references. Contractors are expected to be fully self-sustaining to include all life support, communications, transportation, labor, equipment, security, and other aspects necessary to complet e task orders. The applicable North American Industry Classification System (NAICS) code is 236210 with a Small Business size standard of $28,500,000. A draft Request for Proposal will be issued on or about 26 November 2003. It is anticipated that the f inal solicitations will be issued electronically on or about 05 December 2003 on the Federal Business Opportunities web page at http://www.fedbizopps.gov. Paper copies will not be issued. It is the contractor’s responsibility to view and download th e solicitations and all amendments from http://www.fedbizopps.gov. Contractors may submit questions at http://64.77.1.243. Date, time and location of a pre-proposal conference and information forums as appropriate will be announced in the near future. This information will be provided when available at http://www.rebuilding-iraq.net. Offerors must be registered with the Central Contractor Registration (CCR), in order to receive a government contract award. To register, the CCR Internet address is http://ccr.disc.dla.mil/ccr/.

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

NAICS: 332919
New
Federal
VALVE,GLOBE
Solicitation # N0010426QFE70
This fixed-price solicitation from NAVSUP Weapon Systems Support Mechanicsburg is for the procurement of a Globe Valve (NSN 4820-01-211-8826) designated as a Critical Safety Item and Special Emphasis Material Level I. Due to the high risk associated with failure in crucial shipboard systems, the contract mandates strict quality assurance, comprehensive material traceability, and adherence to TDP Version 013. The scope includes the delivery of the valve to the Portsmouth Naval Shipyard within 365 days, with a requirement for a Certificate of Compliance and detailed test certifications submitted via Wide Area Workflow for review and acceptance prior to shipment. Technical requirements specify the use of ASTM-A276 or ASTM-A479 UNS S31600 material for key components, including the body, bonnet, union nut, and stem assembly. The contractor must maintain a quality system compliant with ISO-9001 and follow rigorous inspection standards for threads, pressure tests, and non-destructive testing. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. Additionally, the contractor must comply with strict cybersecurity reporting under clause 252.204-7012 and follow MIL-STD-2073 and MIL-STD-129 for packaging and marking.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335931
New
Federal
59--CONNECTOR,ELECTRIC
Solicitation # N0010426RFE40
Solicitation N00104-26-R-FE40, issued by NAVSUP Weapon Systems Support, is for the procurement of electric connectors (NSN 1HM 5935-01-542-5968). These components are designated as Critical Safety Items (CSI) and Special Emphasis material because their failure could result in serious personnel injury, loss of life, or the loss of a ship. Due to this criticality, the contract mandates rigorous quality controls, including a requirement for the contractor to maintain a quality system compliant with ISO-9001 or MIL-I-45208. The contract requires extensive testing and certification. Both contractor-led and government-led destructive First Article Testing (FAT) are mandatory, with government testing conducted at the Portsmouth Naval Shipyard. Key technical requirements include the use of QQ-N-286 material for specific penetrator and receptacle components, strict adherence to MIL-DTL-24231, and the prohibition of molybdenum disulfide thread lubricants. Comprehensive certifications are required for production tests, dye penetrant inspection, liquid penetrant inspection, and ultrasonic inspection of starting materials. Award will be made to a single technically acceptable offeror based on the most advantageous combination of price and past performance, with past performance weighted as more important than price. All deliverables must be processed through the Wide Area Workflow (WAWF) system, and a detailed Certificate of Compliance is required to ensure full traceability and adherence to all invoked specifications and drawings. Packaging must comply with MIL-STD-2073-1 and MIL-STD-129 standards.
Current-Carrying Wiring Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334412
New
Federal
CIRCUIT CARD ASSEMB
Solicitation # N0010426QTA53
This contract solicits repair services for a specific circuit card assembly, identified by Cage Code 23905 and reference number 949A9131-101. It requires the contractor to perform repairs in accordance with detailed technical specifications, including adherence to original manufacturer manuals, standards, drawings, and applicable quality requirements. The contractor must ensure all repaired items meet functional and operational standards, complete inspection and testing procedures, and properly mark the items per MIL-STD-130 guidelines. The government mandates a Repair Turnaround Time (RTAT) of 197 days, measured from the physical receipt of the asset to final government acceptance, and requires source inspection. Failure to meet RTAT deadlines may result in negotiated price reductions, while excusable delays will not incur penalties. The contract is structured as a firm-fixed-price arrangement with options for increased quantities at the same unit price. Freight terms specify FOB Origin with shipment handled by the Navy via the Commercial Asset Visibility system. Documentation and certifications must be maintained and accessible, and changes to design or parts require prior government approval, except for designated part number changes under a specified code. The solicitation includes requirements for contractor representations and certifications and references cybersecurity maturity model certification obligations effective November 2025. Offers must include pricing, RTAT, and capacity information, and only authorized distributors for the original manufacturer’s items will be considered for award. The Department of Defense office overseeing this contract is located in Mechanicsburg, PA, with contact available for clarification until the response deadline.
Bare Printed Circuit Board Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333998
New
Federal
53--HOIST STRAP
Solicitation # N0010426QAB90
Solicitation N0010426QAB90 is a total small business set-aside, fixed-price request for quotations issued by NAVSUP Weapon Systems Support Mech for the manufacture of three Hoist Strap Assemblies (P/N: 5641754-303, NIIN: LWM046472). The contractor must ensure all materials are assembled in strict adherence to Drawing 5641754 Rev E and comply with MIL-STD-130 for marking and MIL-STD-973 for configuration control. Delivery is required within 90 days on an FOB Destination basis. Award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with the government utilizing SPRS risk assessments to evaluate item, price, and supplier performance risks. The contract mandates Government Source Inspection per FAR 52.246-2, with inspection and acceptance occurring at the origin. Contractors are required to maintain all inspection records for the duration of the performance period and for 365 calendar days following final delivery. Packaging must comply with MIL-STD-2073-1 and MIL-STD-129, with specific packing levels based on the shipment destination. Administrative requirements include electronic invoicing via the Wide Area Workflow system and compliance with DFARS 252.204-7012 regarding the safeguarding of covered defense information. All hazardous material submissions must include GHS-compliant labels and Safety Data Sheets sent to NAVSUP WSS Code N242.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS