Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on October 15, 2014. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

94th Aircraft Wash and Corrosion Control Services

Awarded
FA6703-14-T-0014Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 488190
New
DIBBS
WASHER, 0.070
Solicitation # SPEFA3-27-T-0026
Solicitation SPEFA3-27-T-0026 is a request for quotations for the procurement of 21 units of Washer, 0.070, identified as a critical application item. The hardware must conform to drawing 152B2055 Revision E, part number 152B2055-4, and NSN 5310LN0020789. The contract is managed by the DLA Aviation office in Jacksonville, Florida, with a required delivery date of March 21, 2027, and a delivery window of 144 days after the award. Delivery, inspection, and acceptance are all set to destination, with shipping directed to the DLA Distribution Jacksonville facility. The contractor must adhere to strict quality and packaging standards, including MIL-STD-130N(1) for identification marking and ASTM D3951 for general packaging, though DLA Master List requirements take precedence. Palletization must follow RP001, and labeling must comply with MIL-STD-129. Quality assurance requires a manufacturer's inspection system complying with SAE AS9003 or ISO 9001, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. The procurement incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, cybersecurity safeguarding under DFARS 252.204-7012, and the use of the Wide Area WorkFlow system for electronic invoicing. Quotations must be submitted via the DIBBS portal by October 27, 2026.
DLA FLEET READINESS CENTER SOUTHEAST

POSTED

about 20 hours ago

DEADLINE

in 7 days
NAICS: 488190
New
DIBBS
SPAR
Solicitation # SPEFA5-27-T-0080
Solicitation SPEFA5-27-T-0080 is a federal procurement issued by the DLA Aviation at Cherry Point, North Carolina, for the acquisition of nine units of NSN 1560LNC13865, identified as a critical application item for Sikorsky Aircraft Corporation (P/N 65211-13012-101). The contract specifies a delivery timeframe of 63 days after order, with an original required delivery date of February 5, 2027. Delivery, inspection, and acceptance are all set as FOB Destination, with shipping directed to the Fleet Readiness Center DLA in Cherry Point, NC. The contractor must adhere to strict quality and packaging standards, including SAE AS9003 or ISO 9001 for manufacturer inspection systems and MIL-STD-1916 or ASQ H1331 for sampling methods. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129 and RQ017 for bare item marking. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various DFARS and FAR clauses, including those regarding cybersecurity (DFARS 252.204-7012), the Buy American Act, and prohibitions on covered defense telecommunications equipment.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 20 hours ago

DEADLINE

in 7 days
NAICS: 488190
New
DIBBS
CLIP, BRACKET
Solicitation # SPEFA5-27-T-0081
Solicitation SPEFA5-27-T-0081 is a request for quotations issued by the DLA Aviation at Cherry Point, North Carolina, for the procurement of three bracket clips, identified by NSN 1560-LL-NCA-7044 and Sikorsky Aircraft Corporation part number 65251-08109-101. The contract requires delivery to the Fleet Readiness Center DLA in Cherry Point, NC, with an original required delivery date of December 8, 2026, and a delivery lead time of 27 days after receipt of order. The items are subject to destination inspection and acceptance, with a zero-percent quantity variance allowed. Technical compliance requires adherence to the DLA Master List of Technical and Quality Requirements, specifically RP001 for packaging and RQ017 for physical identification and bare item marking. Packaging must follow ASTM D3951 and MIL-STD-129, while sampling must be conducted per MIL-STD-1916 or ASQ H1331. The procurement is governed by NAICS code 488190 and incorporates various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and electronic invoicing via the Wide Area WorkFlow system. There is no shelf life requirement for this material.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 20 hours ago

DEADLINE

in 7 days
NAICS: 488190
New
DIBBS
O-RING
Solicitation # SPEFA3-27-T-0027
Solicitation SPEFA3-27-T-0027 is a request for quotations issued by DLA Aviation in Jacksonville, Florida, for the procurement of 9 units of O-rings, identified by NSN 5331LN0035611. This item is designated as a critical application item with approved sources including The Boeing Company, Trelleborg Sealing Solutions (UK), and BAE Systems (Operations) Limited. The required delivery date is October 19, 2026, with a delivery window of 84 days after order. Shipping is set as FOB Destination, with delivery and inspection points both located at the destination in Jacksonville, Florida. The contract mandates strict quality and packaging standards, requiring compliance with ASTM D3951 and MIL-STD-129 for marking and labeling, while DLA Master List requirements and RP001 for palletization take precedence. Quality assurance involves zero-based sampling plans per MIL-STD-1916 or ASQ H1331, and manufacturers must comply with SAE AS9003 or ISO 9001. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and adherence to the Buy American Act and Berry Amendment. Item Unique Identification is not required for this procurement.
DLA FLEET READINESS CENTER SOUTHEAST

POSTED

about 20 hours ago

DEADLINE

in 7 days
NAICS: 488190
New
DIBBS
MOUNT
Solicitation # SPEFA5-27-T-0086
Solicitation SPEFA5-27-T-0086 is a fixed-price procurement issued by the DLA Aviation at Cherry Point, North Carolina, for the supply of three units of a mount, identified by NSN 1560LLNC17132 and Sikorsky Aircraft Corporation part number 65213-06005-048. This critical application item has an original required delivery date of June 10, 2027, with a delivery lead time of 144 days after receipt of order. The contract specifies that both inspection and acceptance will occur at the destination, with shipping directed to the Fleet Readiness Center DLA in Cherry Point, NC. The contractor must adhere to strict quality and packaging standards, including ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 for palletization. Quality assurance requires compliance with SAE AS9003 or ISO 9001, with sampling conducted per MIL-STD-1916 or ASQ H1331. Administrative requirements include electronic invoicing via the Wide Area Workflow system and compliance with various DFARS and FAR clauses, including the Buy American Act, NIST SP 800-171 assessment requirements, and safeguarding of covered defense information.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 20 hours ago

DEADLINE

in 7 days
NAICS: 488190
New
DIBBS
CAP
Solicitation # SPEFA5-27-T-0089
Solicitation SPEFA5-27-T-0089 is a federal procurement issued by the Defense Logistics Agency for the acquisition of four units of NSN 1560LN0035305, identified as CAP, with a part number 205-030-144-035 from Bell Textron Inc. The requirement is categorized under NAICS code 488190. Delivery is required within 13 days after order, with an original required delivery date of November 27, 2026. The terms are FOB Destination, with both inspection and acceptance occurring at the destination. Shipping is directed to the Fleet Readiness Center DLA in Cherry Point, North Carolina. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951, MIL-STD-129 for marking, and RP001 for palletization. Quality assurance will be managed via sampling methods such as MIL-STD-1916 or ASQ H1331, with specific AQLs assigned for critical, major, and minor attributes. Compliance requirements include the Buy American Act, NIST SP 800-171 for cybersecurity, and prohibitions on covered defense telecommunications equipment. All quotes must be submitted through the DLA Internet Bid Board System, and payment will be processed via Wide Area Workflow.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 20 hours ago

DEADLINE

in 7 days
NAICS: 488190
New
DIBBS
COUNTER ASSEMBLY
Solicitation # SPEFA1-26-T-0275
Solicitation SPEFA1-26-T-0275 is a request for quotations for the procurement of five counter assemblies, identified by NSN 1680-LL-SNS-A263. This is a critical application item with referenced part numbers 36011 from Carp Industries Corp and Aerosonic LLC. The contract is managed by DLA Aviation at San Diego, with a required delivery timeline of 84 days and a target delivery date of December 9, 2026. Delivery, inspection, and acceptance are all set as FOB Destination, with shipping directed to Naval Base Coronado in San Diego, California. The contractor must adhere to strict quality and technical standards, including SAE AS9003 or ISO 9001 compliance for manufacturer inspection systems. Sampling will be conducted per MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. Packaging must follow ASTM D3951 and RP001, while marking and labeling must comply with MIL-STD-129. The solicitation incorporates various FAR and DFARS clauses, including the Buy American Act and NIST SP 800-171 assessment requirements. Invoicing is to be processed electronically via the Wide Area WorkFlow system.
DLA FLEET READINESS CT SOUTHWEST DLA

POSTED

about 20 hours ago

DEADLINE

in 2 days
NAICS: 488190
New
DIBBS
BOLT, PAWL, CONTROL
Solicitation # SPE4A6-27-T-5359
Solicitation SPE4A6-27-T-5359 is a request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of four units of Bolt, Pawl, Control (NSN 5306-01-666-2216). This item is designated as a Navy Critical Safety Item, requiring strict adherence to quality management standards such as SAE AS9100 for manufacturers or AS9120 for dealers and distributors. The items are to be delivered FOB Origin to DLA Distribution Cherry Point in North Carolina, with a delivery period of 34 days and a need ship date of December 1, 2026. Offerors must submit quotes via the DIBBS portal and are encouraged to provide quantity ranges to accommodate volatile demand. The procurement strictly prohibits the use of additive manufacturing processes unless specifically authorized. Compliance with the Buy American Act and the Berry Amendment is mandatory, and any non-domestic materials must be disclosed. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system, and contractors must register via the Account Management and Provisioning System to access the Vendor Shipment Module. Inspection and acceptance will occur at the point of origin.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days
NAICS: 488190
New
DIBBS
SKIN
Solicitation # SPEFA5-27-T-0087
Solicitation SPEFA5-27-T-0087 is a fixed-price contract issued by the Defense Logistics Agency for the procurement of three units of SKIN, identified by NSN 1560LN0031890 and part number 65213-04007-106 for Sikorsky Aircraft Corporation. This is designated as a critical application item with a required delivery date of May 4, 2027, and a delivery window of 117 days after order. The items are to be delivered FOB Destination to the Fleet Readiness Center DLA in Cherry Point, North Carolina. The contract mandates strict adherence to DLA Master List technical and quality requirements, including RP001 for packaging and RQ017 for bare item marking. Packaging must comply with ASTM D3951 and MIL-STD-129, while quality assurance requires a manufacturer's inspection system complying with SAE AS9003 or ISO 9001. Sampling shall follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. The procurement is subject to various DFARS and FAR clauses, including cybersecurity reporting under DFARS 252.204-7012 and domestic sourcing restrictions under the Buy American Act.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 20 hours ago

DEADLINE

in 7 days
NAICS: 488190
New
DIBBS
ANGLE
Solicitation # SPEFA5-27-T-0085
Solicitation SPEFA5-27-T-0085 is a fixed-price contract issued by the DLA Aviation at Cherry Point, North Carolina, for the procurement of five units of angle hardware, identified by NSN 1560LLNC10160 and part number 65211-09029-103 from Sikorsky Aircraft Corporation. This critical application item has a required delivery date of February 18, 2027, with a delivery window of 71 days after order. The contract specifies destination for both the point of inspection and acceptance, with shipping directed to the Fleet Readiness Center DLA in Cherry Point, NC. The procurement is subject to rigorous quality and packaging standards, including compliance with MIL-STD-129 for marking and ASTM D3951 for packaging, though DLA Master List requirements and RP001 for palletization take precedence. Quality assurance must align with SAE AS9003 or ISO 9001, and sampling shall follow MIL-STD-1916 or ASQ H1331. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and adherence to DFARS regulations regarding the Buy American Act, safeguarding covered defense information, and the prohibition of certain telecommunications equipment. All quotes must be submitted via the DLA Internet Bid Board System.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 20 hours ago

DEADLINE

in 7 days
NAICS: 488190
New
DIBBS
ADAPTER, STRAIGHT
Solicitation # SPEFA5-27-T-0079
Solicitation SPEFA5-27-T-0079 is a request for quotations issued by the DLA Aviation at Cherry Point, North Carolina, for the procurement of three straight adapters (tube to hose), identified by NSN 4730-LL-NCA-7375 and Eaton Aeroquip part number 816-16D. This critical application item requires delivery within six days after receipt of order, with an original required delivery date of October 15, 2026. The contract is designated as FOB Destination, with both inspection and acceptance occurring at the destination point. The procurement is subject to rigorous quality and technical standards, incorporating the DLA Master List of Technical and Quality Requirements and requiring manufacturer inspection systems to comply with SAE AS9003 or ISO 9001. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance under MIL-STD-105/ASQ Z1.4. Packaging must adhere to ASTM D3951 and RP001, with marking and labeling conducted per MIL-STD-129. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding domestic sourcing, cybersecurity, and small business representations under NAICS code 488190.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 20 hours ago

DEADLINE

in 7 days
NAICS: 488190
New
DIBBS
TUBE ASSY, ELB TO ELB
Solicitation # SPEFA5-27-T-0082
Solicitation SPEFA5-27-T-0082 is a federal procurement issued by the DLA Aviation at Cherry Point, North Carolina, for the supply of nine Elbow to Elbow Tube Assemblies, identified by NSN 1560LLNC15516 and part number 65664-06312-046 from Sikorsky Aircraft Corporation. This critical application item is subject to a delivery window of 32 days after order, with an original required delivery date of December 26, 2026. The contract specifies FOB Destination for both inspection and acceptance at the Fleet Readiness Center DLA in Cherry Point, NC. The procurement mandates strict adherence to quality and packaging standards, including MIL-STD-130N(1) for property identification, MIL-STD-129 for marking, and ASTM D3951 for packaging, with DLA Master List requirements taking precedence. Quality assurance is governed by tailored higher-level requirements and specific sampling plans under MIL-STD-1916 or ASQ H1331. Administratively, the contract requires electronic invoicing through the Wide Area WorkFlow system and incorporates various FAR and DFARS clauses covering cybersecurity, domestic sourcing via the Buy American Act, and the prohibition of covered defense telecommunications equipment.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 20 hours ago

DEADLINE

in 7 days

General Info

Agency

Department Of Defense → FA6703 94TH Contracting Flight Pk

Contract Value

$25,747

NAICS

488190 - Other Support Activities for Air Transportation

Place of Performance

Dobbins Air Reserve Base, Dobbins ARB, GA, 30069, USA

Set-Aside

NONE

Awardee

TRIAD LOGISTICS SERVICES CORPORATION

Award Issued Date

Documents

11

Aircraft Wash and Corrosion Control Services PWS - Dobbins ARB

PDF, High priority: read this firstsow
High

Aircraft Wash and Corrosion Control Services PWS - Dobbins ARB

PDF, High priority: read this firstsow
High

Amendment 0002 to Solicitation FA6703-14-T-0014

PDF, High priority: read this firstamendment
High

FA6703-14-T-0014-0001 Amendment

DOC, High priority: read this firstamendment
High

FA6703-14-T-0014 Section B and E - Aircraft Wash Services

DOC, High priority: read this firstcontract-document
High

Wage Determination No. 2005-2133 (Rev. 13) - Georgia

PDF, High priority: read this firstwage-determination
High

FA6703-14-T-0014 Aircraft Wash and Corrosion Services Q&A

PDF, Low priorityq-and-a
Low

FA6703-14-T-0014 Aircraft Wash and Corrosion Services Q&A

PDF, Low priorityq-and-a
Low

Past and Present Performance Questionnaire - FA6703-14-T-0014

PDF, Low prioritypast-performance
Low

Past and Present Performance Questionnaire - FA6703-14-T-0014

PDF, Low prioritypast-performance
Low

Visitor Request Form

PDF, Low priorityother
Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

5 updates
PhaseAwarded
Posted

Combined Synopsis

Notice updated

The notice description changed.

Notice updated

Notice details unchanged. Attachments may have changed.

Notice updated

Notice details unchanged. Attachments may have changed.

Notice updated

Response deadline changed from Sep 26, 2014 to Oct 3, 2014. The point of contact changed.

Notice updated

Response deadline changed from Oct 3, 2014 to Sep 26, 2014. The point of contact changed.

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA6703 94TH Contracting Flight Pk
Contacts2 people available
OfficeDOBBINS AFB, GA, 30069-4900, USA
Organization / AgencyDepartment Of Defense → FA6703 94TH Contracting Flight Pk
Office AddressDOBBINS AFB, GA, 30069-4900, USA
Contacts
Thomas MilloyContract Officer
contact@example.gov
+1 (555) 000-0000
Luis A. MontanezContracting Specialist
contact@example.gov
+1 (555) 000-0000

More opportunities from Department Of Defense → FA6703 94TH Contracting Flight Pk

Same awarding agency

NAICS: 327320
Federal
Concrete Supply for Flume ConstructionThis contract involves the supply of ready-mix and pre-cast concrete specifically for the construction and repair of flumes. It is designated as a subcontract and is fully set aside for small businesses under the SBA guidelines (FAR 19.5). The contract pertains to NAICS code 327320, which covers ready-mix concrete manufacturing. The contracting agency is the Department of Defense, specifically the 94th Contracting Flight based at Patrick Space Force Base, with the place of performance located in Marietta, ZIP code 30069. The emphasis of the contract is on providing materials essential for infrastructure projects related to flume systems, which are critical for water conveyance and management. Given the subcontract nature and small business set-aside status, the contract encourages participation from qualified small enterprises to fulfill the supply requirements. The procurement was posted on March 3, 2026, and aims to support timely and efficient concrete delivery to meet construction and repair schedules.
Ready-Mix Concrete Manufacturing

POSTED

8 months ago

DEADLINE

N/A
View Details
NAICS: 562910
Federal
Maintenance of Stormwater Basins III, IV, and VThe contract involves routine and corrective maintenance for stormwater retention basins III, IV, and V located in Marietta, with tasks including sediment removal, vegetation management, and structural inspections. It is a subcontract under the Department of Defense’s 94th Contracting Flight, designated as a Total Small Business Set-Aside per FAR 19.5 guidelines. The work falls under NAICS code 562910, which covers environmental remediation services. This contract focuses on ensuring the functional and structural integrity of the designated stormwater basins through regular upkeep and necessary corrections to manage water retention effectively and mitigate environmental impacts.
Remediation Services

POSTED

8 months ago

DEADLINE

N/A
View Details
NAICS: 238110
Federal
New Concrete Flume InstallationThe contract involves the fabrication and installation of new concrete flumes at designated locations to address and eliminate issues with standing water while enhancing drainage flow. This project is aimed at improving water management and infrastructure efficiency in the specified area. Issued by the Department of Defense's 94th Contracting Flight Park division, the contract is classified as a subcontract with a total small business set-aside under the SBA guidelines, adhering to FAR 19.5. The work is to be performed in Marietta, with the NAICS code 238110 indicating a focus on concrete work and related construction activities. The contract was posted on March 3, 2026, and targets qualified small businesses capable of meeting these delivery and installation requirements.
Poured Concrete Foundation and Structure Contractors

POSTED

8 months ago

DEADLINE

N/A
View Details
NAICS: 562910
Federal
Cleaning of Stormwater Infrastructure (Flumes, Pipes, Swales)This contract involves the cleaning and clearing of existing stormwater conveyance systems, specifically targeting concrete flumes, underground pipes, and open swales, with the objective of restoring their proper functionality. It is a subcontract opportunity set aside exclusively for small businesses under the SBA Total Small Business Set-Aside program, and it falls under the NAICS code 562910, which pertains to environmental remediation services. The work will be performed in Marietta, with a postal code of 30069. The contracting agency for this project is the Department of Defense, specifically managed by the FA6703 94TH Contracting Flight Park. Although the solicitation number and detailed contact information are not provided, the contract was posted on March 3, 2026, and is targeted at small business entities capable of maintaining and restoring stormwater infrastructure to ensure continued environmental compliance and operational effectiveness.
Remediation Services

POSTED

8 months ago

DEADLINE

N/A
View Details
NAICS: 561730
Federal
Sod Installation for Erosion ControlThis contract involves the installation of sod on regraded slopes with the purpose of providing immediate vegetation cover to prevent soil erosion. It is a subcontract opportunity designated as a Total Small Business Set-Aside under the Small Business Administration guidelines (FAR 19.5). The work is classified under NAICS code 561730 and is being administered by the Department of Defense through the 94th Contracting Flight at Patrick Space Force Base. The place of performance for this project is in Marietta, with the postal code 30069. The contract, titled "Sod Installation for Erosion Control," was posted on March 3, 2026, and focuses on erosion control measures by stabilizing slopes through sod placement following regrading activities. This opportunity targets small businesses, aiming to support environmentally responsible site management and prevent soil erosion in the specified area. Additional details and access to the solicitation are available through the official government contracting portal.
Landscaping Services

POSTED

8 months ago

DEADLINE

N/A
View Details
NAICS: 237990
Federal
Stormwater Drainage System Regrading and Slope StabilizationThis contract involves regrading failed or disturbed slopes to restore proper drainage and prevent erosion, incorporating earthmoving, grading, and soil stabilization activities. It is focused on addressing stormwater drainage issues by reshaping and stabilizing slopes to ensure effective water flow and reduce soil displacement, which helps maintain the structural integrity of the affected area. The contract, titled "Stormwater Drainage System Regrading and Slope Stabilization," is a subcontract issued by the Department of Defense through the 94th Contracting Flight Pk. Designated as a total small business set-aside under FAR 19.5, it falls under NAICS code 237990, which pertains to site preparation contractors. The project will be performed in Marietta, ZIP code 30069, with the solicitation posted on March 3, 2026. The contract aims to support environmental management and infrastructure resilience on the designated site.
Other Heavy and Civil Engineering Construction

POSTED

8 months ago

DEADLINE

N/A
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS