This Government Contract opportunity from Department Of Defense was posted on December 31, 2014. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

99--Epoxy Hardener, Epicure 3140 and Adhesive Epon Resin No. 828

Awarded

W52P1J-15-T-3006Federal

Submission Closed12/31/2014, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 325520

New

DIBBS

Supply of Adhesive (NSN 8040-01-268-5916)This subcontract involves the manufacture or distribution of 12,000 specialized adhesive kits, identified by NSN 8040012685916, for prime contractors supporting the Defense Logistics Agency. The contractor must ensure all materials are packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards. To maintain material integrity, strict temperature controls are required, with storage and transport maintained at or below 77 degrees Fahrenheit. The contract requires delivery within 20 days of the order placement, with performance centered in Jacksonville. This opportunity falls under NAICS code 325520 and is managed through the Department of Defense. Interested parties must adhere to the response deadline of November 4, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8ES-27-T-0236

Solicitation SPE8ES-27-T-0236 is a procurement request by the Defense Logistics Agency Troop Support for 12 kits of yellow adhesive, identified by NSN 8040-01-268-5916 and part number MERECO XL-389T. The adhesive is a critical application item consisting of an 8 oz base clear part and an 8 oz activator, totaling one pint per kit. The requirement specifies a non-extendable shelf life of six months and requires storage temperatures at or below 77 degrees Fahrenheit. Delivery is required within 20 days of award, with a final required delivery date of October 30, 2026, shipped FOB Destination to the Marine Aviation Logistics SQ 26 in Jacksonville, North Carolina. The contract mandates strict adherence to hazardous material regulations, requiring the submission of Safety Data Sheets and labels consistent with 29 CFR 1910.1200 and Federal Standard No. 313-E prior to award. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001 and IP025. Administrative requirements include the use of Wide Area WorkFlow for invoicing and compliance with the Buy American Act and DFARS cybersecurity reporting standards. Inspection and acceptance will occur at the destination per FAR 52.246-1. All quotes must be submitted via the DIBBS portal by November 4, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8ES-27-T-0239

Solicitation SPE8ES-27-T-0239, issued by the Defense Logistics Agency Troop Support, is for the procurement of clear adhesive aerosol cans, specifically NSN 8040012150980. The requirement consists of two line items, each for one box containing twelve 24-ounce aerosol cans with a net weight of 18 ounces per can. The items are identified as Type I (Code H) with a non-extendable shelf life of 12 months and must be stored at temperatures between 60-80 degrees Fahrenheit. Delivery is required within five days after order, with a final required delivery date of November 2, 2026, shipped FOB Destination to the NAVSUP Fleet Logistic Center in Yokosuka, Japan. The contract mandates strict adherence to hazardous materials regulations, requiring the submission of Safety Data Sheets and Hazardous Communication Standard labels for review prior to award. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA requirement RP001. Key regulatory clauses include the Buy American and Balance of Payments Program, DFARS cybersecurity reporting requirements, and the prohibition of additive manufacturing processes for the supplied items. Invoicing must be processed electronically through the Wide Area WorkFlow system. Quotations are due by November 4, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8ES-27-T-0238

Solicitation SPE8ES-27-T-0238 is a Request for Quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment for the procurement of two cartridges of a one-part, electrically conductive, amine-curing, silicone rubber adhesive-sealant. This black adhesive is used for bonding conductive rubber to metals, creating gaskets for EMI and RFI assemblies, and promoting electrostatic discharge in metal assemblies. The item is classified as a Type I (Code H) material with a non-extendable shelf life of 12 months and must be stored between 40 and 110 degrees Fahrenheit. Delivery is required within five days after receipt of order, with a required delivery date of October 30, 2026, shipped FOB Destination to the McAlester Army Ammo Plant in Oklahoma. The contract mandates strict adherence to hazardous materials regulations, requiring the submission of Safety Data Sheets and Hazard Communication Standard labels prior to award. Packaging must comply with MIL-STD-2073-1E and RP001, with a maximum of 25 cartridges per corrugated fiberboard box not exceeding 65 pounds. Marking must follow MIL-STD-129, specifically using Special Marking Code 32 for shelf-life items. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. Inspection and acceptance will occur at the destination.

Defense Logistics Agency

POSTED

DEADLINE

Corrosion Resistant Coating SupplierThis subcontract opportunity through DLA DIST SAN JOAQUIN requires a supplier to provide 15 pints of chemically treated corrosion-resistant coating. The material must conform to specification MIL-DTL-81706B(1) Revision B and be identified by NSN 8030016269987. The supplier will support prime contractors delivering DLA Troop Support Construction and Equipment contracts and is responsible for managing logistics for FOB Destination delivery. Eligible bidders must possess a valid CAGE code and active SAM registration. The performance location for this contract is in Tracy, California. Interested parties must submit their responses by the deadline of November 3, 2026.

POSTED

DEADLINE

Supply of Specialized Sealant (NSN 8030014651390)This subcontract involves the supply of specialized sealant, identified by NSN 8030014651390, to support prime contractors under Defense Logistics Agency Troop Support Construction and Equipment contracts. The selected provider must ensure all materials meet strict NSN specifications and are packaged according to MIL-STD-2073-1E. Additionally, the sealant must be maintained at a room temperature between 60 and 80 degrees Fahrenheit to ensure product integrity. The agreement requires the delivery of two units FOB Destination to Fort Carson, Colorado, within five days of the contract award. Managed under NAICS code 325520 for the Department of Defense, the contract focuses on the timely and compliant shipment of these specialized units to meet agency requirements.

Defense Logistics Agency

POSTED

DEADLINE

Supply of High-Strength Modified Epoxy Adhesive (NSN 8040-01-259-2428)This subcontract involves the supply of a high-strength, two-part modified epoxy adhesive, identified by NSN 8040-01-259-2428, to prime contractors supporting Defense Logistics Agency Troop Support contracts. The adhesive is specifically intended for bonding sheet molds within transportation market applications. The scope of work requires the delivery of two kits of the specified epoxy along with all necessary safety documentation, including Safety Data Sheets and labels that comply with Hazardous Communication Standard 29 C.F.R. 1910.1200. Managed under the Department of Defense and the Defense Logistics Agency, the contract falls under NAICS code 325520. The place of performance is located in Norfolk, Virginia. Interested parties should note the response deadline of November 3, 2026, for this procurement effort.

Defense Logistics Agency

POSTED

DEADLINE

Supplier of Adhesive Primer (NSN 8040-01-644-9395)This subcontract through the Defense Logistics Agency involves the supply of Type I adhesive primer, identified by NSN 8040-01-644-9395, for prime contractors supporting DLA Troop Support. The supplier must ensure the product meets the DLA Master List of Technical and Quality Requirements and adheres to strict temperature-controlled logistics, maintaining storage and shipment conditions between 60 and 80 degrees Fahrenheit. The scope of work requires the delivery of one pint of primer to Fort Campbell, Kentucky. All items must be packaged and marked in accordance with MIL-STD-2073-1E, RP001, and MIL-STD-129 standards. This requirement falls under NAICS code 325520 and is managed by the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

Supplier of Sealing Compound (NSN 8030-01-309-1446)This subcontract involves the supply of specialized sealing compound, identified by NSN 8030013091446, to prime contractors supporting Defense Logistics Agency supply contracts. The agreement requires the delivery of two units with a minimum shelf life of nine months. All materials must strictly adhere to MIL-R-47211A(1) Revision A and meet NAVAIR aircraft launch and recovery equipment traceability standards. The supplier is responsible for ensuring all packaging and marking comply with MIL-STD-2073-1E, MIL-STD-129, and RP001. Additionally, all safety data sheets and labels must be compliant with GHS and Federal Standard No. 313-E. Performance for this contract is centered in Patuxent River, with the procurement falling under NAICS code 325520.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Specialized Adhesive (NSN 8040-00-858-9798)This subcontract involves the procurement and delivery of 2,000 kits of specialized adhesive, identified by NSN 8040008589798, to support prime contractors under DLA Troop Support supply contracts. The Department of Defense, specifically DLA DIST OKC KO CP, requires the materials to be delivered to Tinker AFB by October 29, 2026, utilizing the fastest traceable means of transport. Compliance with hazardous material labeling is mandatory per DFARS 252.223-7001 and Federal Standard No. 313. Additionally, the successful contractor must maintain active registrations in both the System for Award Management and the Wide Area Workflow system to facilitate contract administration and payment.

POSTED

DEADLINE

Gray Adhesive Supplier (NSN 8040-01-415-7040)This subcontract involves the supply of gray adhesive for prime contractors supporting Defense Logistics Agency contracts. The requirement is for one box containing six 1-pint kits that adhere to NSN 8040-01-415-7040 specifications, featuring a non-extendable shelf life of 24 months. All materials must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 using Special Marking Code 32, with labels and safety data sheets compliant with 29 CFR 1910.1200. The contract mandates strict adherence to the Buy American Act and requires delivery FOB Destination to Fort Campbell, Kentucky. Classified under NAICS code 325520, the opportunity was posted on October 28, 2026, with a response deadline of November 3, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Manufacture and Supply of Blind Rivets (NSN 5320-01-195-3006)This subcontract involves the manufacture and supply of five precision-manufactured blind rivets, identified as NSN 5320-01-195-3006, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires strict adherence to technical specifications, including NASM90354, ASME B46.1 for surface roughness, and ASME Y14.5 for dimensioning. Additionally, part marking must comply with MIL-STD-13, and the use of additive manufacturing is strictly prohibited. The selected provider must maintain a quality system certified under SAE AS9003 or ISO 9001 and utilize MIL-STD-1916 sampling methods. Final deliverables must be packaged according to ASTM D3951 and MIL-STD-129 standards. Performance for this Department of Defense contract is centered at Hill AFB, with a response deadline set for November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days

AI Contract Overview

The Army Contracting Command - Rock Island is soliciting quotes for the procurement of 470 gallons of Epicure 3140 Epoxy Hardener and 590 gallons of Epon Resin No. 828. These materials must adhere to Drawing 12576464 Rev D and Drawing 12576463 Rev D, respectively, for use with end items 81mm and M819. This is a firm-fixed price, competitive procurement set aside for small businesses under NAICS code 325520, with delivery designated as FOB Destination to the Pine Bluff Arsenal in Pine Bluff, Arkansas. First Article Testing is not required for this contract. Interested parties must be registered in the System for Award Management to be eligible for an award. The solicitation, identified as W52P1J-15-T-3006, was managed through the Army Single Face to Industry website, with all inquiries directed to the Army Contract Command - Rock Island.

General Info

Agency

Department Of Defense → W4MM USA Joint Munitions Command

Contract Value

$30,300

NAICS

325520 - Adhesive Manufacturing

Place of Performance

IL, USA

Set-Aside

NONE

Awardee

SIMCO COATINGS INC

Award Issued Date

12/31/2014, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

4 updates

PhaseAwarded

PostedOct 3

Presolicitation

Notice updatedOct 6

The notice description changed.

Notice updatedOct 8

The notice description changed.

Notice updatedNov 14

Response deadline changed from Oct 31, 2014 to Dec 1, 2014. The notice description changed.

Notice updatedNov 18

Notice details unchanged. Attachments may have changed.

Type ChangedNov 19

Presolicitation → Solicitation

AwardedDec 31

Contract was awarded

Submission Closed

12/31/2014, 12:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W4MM USA Joint Munitions Command

ContactsNo contacts available

OfficeROCK ISLAND, IL, 61299-5000, USA

Organization / AgencyDepartment Of Defense → W4MM USA Joint Munitions Command

Office AddressROCK ISLAND, IL, 61299-5000, USA

ContactsNo contact information available

Full Description

Epoxy Hardener, Epicure 3140, in accordance with Drawing 12576464 Rev D dated 1 April 2013 and Adhesive Epon Resin No. 828, in accordance with Drawing 12576463 Rev D dated 1 April 2013. First Article Test is not required. End Items: 81mm and M819. The Army Contracting Command - Rock Island (ACC-RI) intends to issue a Request for Quote, W52P1J-15-T-3006, to the Army Single Face to Industry Website (ASFI) at http://acquisition.army.mil/asfi/ on or about 7 October 2014 with a closing date of 14 days after issuance. This procurement will be a firm-fixed price, Competitive, Small Business Set-Aside. The requirement is for a quantity of 470 gallons of Epoxy Hardener and 590 gallons of Epon Resin. The applicable NAICS code is 325520 with a small business size standard of 500 employees. FOB: Destination, Pine Bluff Arsenal, Pine Bluff, AR. All contractors who provide goods/services to the Department of Defense (DoD) must be registered in the System of Award Management (SAM). If you are not registered in SAM, you cannot be awarded a DoD Contract. The internet site for registering in SAM is https://sam.gov/. You may also contact the SAM Customer Service, Federal Service Desk at +1 (555) 000-0000. Please direct any questions, prior to the applicable closing date, in writing to: Army Contract Command - Rock Island, ATTN: CCRC-IS/ Ashanti Brown, 3055 Rodman Avenue, Rock Island, IL 61299-8000 or contact@example.gov.