Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

A-FRAME, VEHICLE MOUNTI

Active
SPE7L1-26-T-943MFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for one A-Frame vehicle mounting unit under solicitation SPE7L1-26-T-943M, with a total small business set-aside and a NAICS code of 336992 for other transportation equipment manufacturing. The item has a NSN of 2590-01-351-7773 and requires delivery within 20 days after order date to Fort Lee, Virginia. Technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The contractor must comply with tailored higher-level quality requirements, inspection and acceptance at origin, removal of government identification from rejected supplies, and component qualifications as defined by Qualified Products or Manufacturers Lists. Packaging must meet DLA-specific standards, and all measuring and test equipment used must be properly calibrated and documented. Cybersecurity compliance mandates CMMC Level 2 certification through a certified third-party assessment organization. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons without prior authorization, and access is limited to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA approval. The contract is open only to small businesses, with responses due by August 20, 2026, and point of contact for inquiries is Kristina Derry at the Defense Logistics Agency.

General Info

Small business contract for A-Frame mount, NSN 2590-01-351-7773, delivery to Fort Lee in 20 days, CMMC Level 2, ITAR/EAR controlled.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

336992 - Military Armored Vehicle, Tank, and Tank Component ManufacturingView NAICS

Place of Performance

BLDG 6242, FORT LEE, VA, 23801, US

Set-Aside

SBA

Documents

(1)

RFQ SPE7L1-26-T-943M for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Kristina Derry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
A-FRAME,VEHICLE MOUNTING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RT001: MEASURING AND TEST EQUIPMENT
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint
SPE7L1-26-T-943M
SECTION B
Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 2590-01-351-7773 Quantity: 1 EA Purchase Request: 7017784157QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336992
New
DIBBS
HOUSING, AUXILIARY P
Solicitation # SPE7L3-26-T-169W
The solicitation SPE7L3-26-T-169W seeks 29 units of a housing component for an auxiliary power unit, designated by NSN 2590-01-255-0866, with a delivery requirement of 165 days after order. The item is manufactured through a metal casting process requiring specialized tooling, and suppliers must comply with strict technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. All deliveries must include a Certificate of Quality Compliance (COQC) for each manufacturing lot, prepared in accordance with the Supplemental Quality Assurance Provision, and submitted electronically via the iRAPT system with supporting documentation uploaded to the Receiving Report. Government inspection at source applies, and contractors must make the COQC available for review prior to acceptance. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessment organizations, and the contract includes provisions for configuration change management, qualified products or manufacturers lists, and adherence to DLA packaging standards. Removal of government identification from non-accepted items is required, and all supplies must meet specifications tied to defined QPLs or QMLs. The procurement is managed under the Land Supplier Operations Vehicle Support organization, with performance occurring in Texarkana, Texas, and primary point of contact being Matthew Curry. The solicitation closed on August 20, 2026, and the North American Industry Classification System code is 336992 for other transportation equipment manufacturing.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336992
New
DIBBS
ARMOR, SUPPLEMENTAL, SMA
Solicitation # SPE7L4-26-T-6209
The contract pertains to the procurement of one unit of supplemental armor for small arms fragmentation, identified by NSN 2540-01-606-3668 and part number 40810008, under solicitation SPE7L4-26-T-6209. Delivery is required within ten days FOB origin, with no tolerance for quantity variance, and must be inspected and accepted at the destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over commercial standards such as ASTM D3951. Packaging must conform to MIL-STD-129 labeling and DLA-specific packaging guidelines, with hazardous material handled per TQ requirement IP025 and non-hazardous material commercially packaged as applicable. Palletization must adhere to RP001 requirements. The item is designated as a critical application item and requires cybersecurity compliance through a CMMC Level 2 self-assessment. The delivery location is designated as W90HDC, Fort Bliss, Texas, with shipping instructions mandating the fastest traceable method and explicitly prohibiting parcel post. Marking must include the military freight designator W90HDC62120668 and reference RDD 555 and Project TP 2. The contract specifies a required delivery date of August 5, 2026, with the solicitation issued on August 9, 2026, and responses due by August 20, 2026. The primary point of contact is Anna-Rachelle Betts, and the procurement falls under NAICS code 336992 for other arms, ordnance, and accessories manufacturing. All government-specific identifiers and codes, including DIC A0A and ADV FC Z9, are for official use only and must be observed in documentation and labeling.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336992
New
Federal
15--ARMOR,SUPPLEMENTAL,
Solicitation # N0038326QBA53
The contract solicitation NSN 1R-1560-016723515-V2 requests seventeen units of supplemental armor with technical documentation version 001, under FOB origin delivery terms. Issued by the Naval Supply Systems Command Weapon Systems Support, the posting date is August 7, 2026, with proposals due by September 21, 2026, at 4:00 a.m. Eastern Time. This is a presolicitation notice and does not specify a set-aside type or NAICS code, indicating the opportunity is open to all qualified vendors without restriction. The performance location is unreleased, but the solicitation originates from the office in Philadelphia, Pennsylvania, with Grace Y. McGinley serving as the primary point of contact for inquiries through the provided email and phone number. The procurement is managed under the Department of Defense and the official solicitation can be accessed via the SAM.gov portal linked in the data.
Navsup Weapon Systems Support

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 336992
New
Federal
Sources Sought, Kit, ETWD Tube Temperature Display, NSN: 1025-01-606-1032
Solicitation # W912CH-26-R-A054
The Army Contracting Command – Detroit Arsenal is conducting market research through a Sources Sought Notice to evaluate industry capabilities for the production of the Kit, ETWD Tube Temperature Display, identified by NSN 1025-01-606-1032 and part number 11582731, which is used on the 155MM Howitzer M777A2. Estimated annual quantities are 478 units in Year 1 and 111 units each in Years 2 and 3, with no planned requirements in subsequent years. This notice is solely for planning purposes and does not constitute a solicitation or guarantee of future contract award. To access the associated Technical Data Package (TDP), which has a distribution code D limiting access to DoD and U.S. DoD contractors, vendors must have an active DD 2345 Military Critical Technical Data Agreement on file with the Defense Logistics Information Service and must request access via SAM.gov, with further verification through the Joint Certification Program. Vendors are required to destroy all copies of the TDP upon completion of the Government’s intended use through approved methods including shredding, burning, pulping, melting, or complete electronic deletion. First Article Testing will be required for any future award. Respondents must complete a vendor profile including company name, mailing address, CAGE code, point of contact, and website, and must declare their business size and socioeconomic status under NAICS code 336992, including whether they qualify as a small business, 8(a), HUBZone, Woman-Owned, Service-Disabled Veteran-Owned, or Large Business. Small businesses must also indicate compliance with the Nonmanufacturer Rule, demonstrating either direct manufacture, supply from another small business manufacturer, or an approved SBA waiver. Responses must be submitted via email to Kaitlyn Fruhner no later than August 17, 2026, with the subject line “Sources Sought, W912CH-26-R-A054,” and may include product manuals or sales media. All proprietary or confidential information must be clearly marked with “PROPRIETARY INFORMATION CONTAINED WITHIN” on the cover and “CONFIDENTIAL” on sensitive content, with electronic submissions requiring legends on both the email cover and at the start of the file; partial confidentiality must be denoted with “CONFIDENTIAL DATA BEGINS” and “CONFIDENTIAL PORTION ENDS.” The
W6QK Acc- Dta

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 336992
New
Federal
Nonmanufacturer Rule-Compliant Supplier
W6QK Acc- Dta

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336992
New
Federal
Final Assembly and Integration of Military Vehicle Component
W6QK Acc- Dta

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336992
New
Federal
25--PARTS KIT,DOOR LIFT
Solicitation # SPE7L326T164S
The contract seeks procurement of a Parts Kit, Door Lift with NSN 2590012121057 under solicitation number SPE7L326T164S, issued by the DLA Land and Maritime under the Department of Defense. A total of 793 units are requested across four line items: 22, 70, and 700 units in kit form (UI KT) to be delivered to DLA Distribution Albany within 157 days, and one unit in individual assembly form (UI EA) requiring delivery within 30 days. All quotes must be submitted electronically, and the solicitation is open to all responsible sources with no restrictions beyond the specified set-aside. This is a Small Business Set Aside designated as total, meaning only small businesses may respond, and it falls under the NAICS code 336992 for other transportation equipment manufacturing. The response deadline is August 17, 2026, and all inquiries must be directed via email to the designated point of contact. The contract office is located in Columbus, Ohio, and performance is to be fulfilled at DLA Distribution Albany regardless of the vendor’s location.
DLA Land And Maritime

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336992
New
Federal
30--GEAR,SPUR
Solicitation # SPE7L426T6034
The U.S. Department of Defense, through DLA Land and Maritime, is soliciting quotes for 48 units of the gear spur with NSN 3020011547664, to be delivered to DLA Distribution Albany within 168 days of award. This procurement is conducted via a request for quotation with no hard copies available; all submissions must be made electronically. Approved sources for this item are limited to 56161 with part number 10501236 and S3002 with part number 24028213.02. The solicitation, identified by number SPE7L426T6034, was posted on August 6, 2026, with responses due by August 17, 2026. No specifications, plans, or drawings are provided, and all responsible sources are invited to submit quotes provided they meet the submission deadline. The procurement falls under NAICS code 336992 and is not subject to any set-aside designation. Questions should be directed via email to the designated point of contact, with additional information accessible through the SAM.gov portal using the solicitation number.
DLA Land And Maritime

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336992
New
Federal
Request for Information for Production of Stryker Double-V Hull (DVH) A1 Engineering Change Proposal (ECP) Vehicles
Solicitation # W56HZV20D0005
The U.S. Army’s Project Management Office for the Stryker Brigade Combat Team is seeking industry input on the capability to produce Stryker vehicles configured with the Double-V Hull A1 Engineering Change Proposal, as no complete systems-level Technical Data Package is currently available. The request aims to evaluate potential contractors’ ability to manufacture new DVH hulls and integrate all required components without relying on existing technical documentation, focusing on production readiness, welding expertise with armor materials such as rolled homogeneous armor and high hard armor, and the certification of welders for armor steel. Companies must detail their experience in armored vehicle production, outline their achievable monthly production rates, and explain how they would meet performance specifications without a full TDP, addressing each question comprehensively. Responses are due by 1300 Eastern Daylight Time on 11 August 2026 and must be submitted electronically in Word, Excel, PowerPoint, or Adobe Acrobat formats, with each email not exceeding 3.5 megabytes and including specific labeling requirements. Submissions must include the company’s CAGE code, full contact details, facility locations, business size, and SAM status. All information provided is voluntary, non-binding, and not eligible for reimbursement; no contract award is guaranteed nor implied by this request. Proprietary data must be clearly marked with authorized legends to ensure confidentiality, and unmarked information will not be protected. Respondents are advised that this is not a solicitation and any future opportunities will be posted publicly on SAM.gov.
W6QK Acc- Dta

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 336992
New
Federal
25--PLATE,BODY STRUCTUR
Solicitation # SPE7L326T153V
The contract seeks the procurement of 41 units of NSN 2590012156634 PLATE,BODY STRUCTUR, with 40 units required for delivery to W1A8 DLA DISTRIBUTION within 276 days after award and one additional unit due within 60 days after award. The solicitation is open to all responsible sources, but quotes must be submitted electronically and received by the deadline to be considered. This is a Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside under FAR 19.14, exclusively available to qualifying small businesses owned and controlled by service-disabled veterans. The North American Industry Classification System code is 336992, indicating the product falls under Other Transportation Equipment Manufacturing. The solicitation is managed by the Department of Defense through DLA Land and Maritime, with the office located in Columbus, Ohio. All questions must be directed via email to the designated point of contact, as specified in the solicitation document accessible through the provided links. The response deadline is August 17, 2026, and the solicitation was posted on August 6, 2026.
DLA Land And Maritime

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336992
New
Federal
53--DOOR,ACCESS,WEAPON SYS
Solicitation # SPE7L426T6066
The contract involves the procurement of one unit of NSN 5342013868153, a door for access to a weapon system, to be delivered to W1A8 DLA DISTRIBUTION within 168 days after order placement. Only two approved sources are authorized for this requirement: 076M6 and 0FW39, both sharing the same part number 12416374. The solicitation is issued as a Request for Quotation under number SPE7L426T6066 and is exclusively available electronically via the provided SAM.gov link; no hard copies are distributed. Technical specifications, plans, or drawings are not provided, and all responsible sources are invited to submit electronic quotes prior to the deadline of August 17, 2026. The procurement falls under NAICS code 336992 and is managed by the DLA Land and Maritime office in Columbus, Ohio, with all inquiries directed to the buyer email listed in the solicitation document via the DIBBS portal.
DLA Land And Maritime

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336992
New
Federal
53--PACKING WITH RETAIN
Solicitation # SPE7M426T309C
The contract pertains to the procurement of 340 units of packing with retain, identified by NSN 5330010978065, to be delivered to DLA Distribution San Diego within 184 days of award. The solicitation, numbered SPE7M4Q26T309C, is a combined requirement issued under the SBA Certified Women-Owned Small Business Program Set-Aside, restricted exclusively to certified WOSB concerns. The NAICS code 336992 classifies this acquisition under other transportation equipment manufacturing. All responses must be submitted electronically via the provided SAM.gov link; hard copies are not accepted, and digital access to drawings and military specifications is available through official channels. The solicitation was posted on August 6, 2026, with a response deadline of August 17, 2026. Point of contact for inquiries is listed as DibbsBSM@dla.mil, with further details available through the DIBBS website using the solicitation number. The contracting office is based in Columbus, Ohio, under the Department of Defense’s DLA Land and Maritime organization.
DLA Land And Maritime

POSTED

3 days ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 339999
New
DIBBS
NON-NSN ITEM
Solicitation # SPE7L1-26-T-943E
The contract pertains to a non-NSN item with part number 5GQU3FMRB1003N1820A3E10B3SSP1P8 sourced from COTTERMAN CO USA located in Croswell, Michigan, with a total quantity of two units to be delivered in 20 days. Delivery is FOB destination with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 labeling, with palletization adhering to DLA’s RP001 packaging requirements, and packaging unit quantity specified as one per unit pack. The destination for delivery and marking is Camp Carroll, Waegwan, Korea, under the W50YED code, with transportation governed by DLAD Proc Notes C19 and C20. The contract reference is SPE7L1-26-T-943E, with an original required delivery date of August 7, 2026, and a purchase request number of 7017798068. The unit price is not provided but the total cost is implied as two units at the listed price line, with government use indicators and procurement details including the DLA point of contact and contract type classified as a solicitation.
All Other Miscellaneous Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336360
New
DIBBS
BOX, ACCESSORIES STO
Solicitation # SPE7L1-26-T-944L
This contract specifies the procurement of one unit of a box and accessories identified by NSN 2540015981937 under solicitation SPE7L1-26-T-944L, with a required delivery within five days of award and a firm delivery date of August 4, 2026. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications including ASTM D3951 for packaging. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA Packaging Requirements, with hazardous materials packaged according to TQ requirement IP025 if classified per FED-STD-313. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutes require prior approval unless explicitly permitted by the specification. The item is to be delivered FOB origin with no quantity variance permitted, inspected and accepted at destination, and must be shipped via the fastest traceable means, excluding parcel post. Shipping instructions direct delivery to the DLA Distribution Management Office in Yermo, California, with an alternate parcel post address in Barstow, California. The unit of issue is each, priced at $1.00, with total value of $1.00, and the contract includes strict government-use identifiers and tracking data for logistics coordination.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
CLAMP, HUB
Solicitation # SPE7L1-26-T-947J
The contract pertains to the procurement of six CLAMP, HUB units under solicitation SPE7L1-26-T-947J, with a firm delivery deadline of 20 days after order placement. The acquisition is governed by stringent Department of Defense standards, including compliance with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, where the applicable revision is controlled by the solicitation issue date. Cybersecurity requirements mandate CMMC Level 2 certification through an approved Third-Party Assessment Organization, ensuring robust information protection practices. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Contractors must hold a valid US/Canada Joint Certification Program credential, complete mandatory DOD export control training, and receive explicit approval from DLA to access controlled data, with DFARS 252.225-7048 fully applicable. Additionally, government identification must be removed from any non-accepted supplies. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is managed by the Department of Defense’s Land Supply Chain under NAICS code 333613. Point of contact is Kristina Derry, reachable via email and phone provided.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336350
New
DIBBS
DISK ASSEMBLY
Solicitation # SPE7L1-26-T-945B
The contract specifies the procurement of a Disk Assembly requiring precision manufacturing through a forging process, with critical welding as defined by Drawing 12479550 and associated technical documentation. All items must meet stringent quality standards, including inspection and acceptance at the manufacturer’s facility using technical methods only—count, kind, or condition inspections are explicitly prohibited. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required for acceptance unless otherwise noted, and attributes are to be categorized with AQLs of 0.1 for critical, 1.0 for major, and 4.0 for minor. The item must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with preservation using dry methods and desiccant materials. Packaging is to be palletized under DLA-specific guidelines, and no ozone-depleting chemicals may be used in any component or process. The contractor must submit a preproduction welding procedure specification for approval and may replace Army-designed inspection equipment with CNC or industry-standard tools only if accuracy is equal or greater. Final inspection and acceptance occur at the manufacturing site, and all technical drawings and data must be made available for verification. The contract includes strict cybersecurity protections under DFARS 252.204-7012 and NIST SP 800-171, mandatory use of E-Verify for employment eligibility, and compliance with anti-trafficking provisions. All ocean shipments require U.S.-flag vessels unless a waiver is obtained 45 days in advance, and hazardous materials must be documented with up-to-date Safety Data Sheets submitted prior to award. The contract is a Women-Owned Small Business Set-Aside under NAICS 336350 with a fixed-price line item for 58 units at $58.00 each, totaling $3,364.00. Delivery is due 143 days after order placement, FOB Origin, to the DLA Distribution Facility in New Cumberland, Pennsylvania, with invoicing required through WAWF. The technical data package references multiple revision levels of engineering drawings and quality assurance provisions, all of which must remain current with the latest revisions effective at solicitation or award date.
Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335312
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L1-26-U-0557
The contract covers the procurement of a power supply with part number TH-4322 under solicitation SPE7L1-26-U-0557, issued by the Department of Defense through DLA Land and Maritime, Land Supply Chain, as a Total Small Business Set-Aside under NAICS code 335312. The delivery is for 10 units with a unit of issue of EA, scheduled for FOB Origin delivery within 127 days, and inspection and acceptance occur at the destination. The contract is an indefinite-delivery contract with a guaranteed minimum of one unit and a maximum value ceiling of $350,000, though no unit price is specified for the current line item. The item must meet stringent technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, and must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, which mandates the inclusion of the contract number, NAWC CAGE code, and part number on bare items. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes must be verified at levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. The supply chain must maintain traceability documentation per DLA Directive Procurement Notes C03, and mercury or mercury-containing compounds are strictly prohibited except for specific functional uses in batteries, lights, sensors, weapons, and reagents as defined by NAVSEA, with portable devices requiring shock-proofing and a secondary containment. All hazardous materials must be labeled and documented per 29 CFR 1910.1200 and Federal Standard No. 313, and any radioactive materials exceeding thresholds must be marked in accordance with MIL-STD-129 with prior notification to the government. The contractor must achieve Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment compliance, and all subcontracting activities are governed by clauses mandating small business participation and accelerated payments to small business subcontractors. Electronic invoicing is exclusively through WAWF, and compliance with FAR and DFARS clauses covers equal opportunity, combating trafficking, employment eligibility verification, sustainable product requirements, safeguarding contractor information systems
Motor and Generator Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332111
New
DIBBS
GUIDE, CAM FOLLOWER, FO
Solicitation # SPE7L1-26-T-946Y
The contract pertains to the procurement of a Guide, Cam Follower, Folding Floor, identified by NSN 5340-01-540-4920 and part number 7017777897, with a quantity of 64 units. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, incorporating specific R and I numbered provisions including packaging standards, removal of government identification from non-accepted supplies, and qualified products or manufacturers lists. The item must comply with stringent quality assurance protocols, including mandatory Certificates of Quality Compliance and Metal Certification, which are to be submitted as part of the Contract Data Requirements Lists. Sampling and inspection are to follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and attributes are assigned verification levels or AQLs based on criticality. Technical documentation, including drawings and quality assurance provisions, is referenced under Revision D of the Technical Data Package dated through 2025. Delivery is FOB origin with inspection and acceptance occurring at destination, and packaging must conform to MIL-STD-2073-1E and MIL-STD-129 with no special marking. The product must be palletized according to DLA packaging directives and shipped to the designated facility in Tracy, California. The delivery deadline is 116 days from contract award, with an original required delivery date of April 7, 2027, and a need ship date of February 5, 2026. The unit price is $64.00, resulting in a total contract value of $4,096, and the solicitation was issued under SPE7L1-26-T-946Y with responses due by August 20, 2026.
Iron and Steel Forging

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
INJECTOR ASSEMBLY, F
Solicitation # SPE7L1-26-T-946Q
The contract is for one fuel injector assembly, part number 4928260 with NSN 2910-01-710-6138, designated as a critical application item under solicitation SPE7L1-26-T-946Q. The item must be delivered in a single unit within 20 days, with delivery terms FOB origin and no variance allowed in quantity. Inspection and acceptance both occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with specific packaging codes and methods outlined including unit container E5 and intermediate container E5. Palletization must follow RP001 DLA packaging requirements, and no special marking is required. The delivery destination is the Navy Expeditionary Logistics Support Group in Williamsburg, Virginia, but parcel post is explicitly prohibited—shipment must occur via the fastest traceable means. The original required delivery date is August 10, 2026, and the contract includes project code ZH9 TP 2 and government-use identifiers for tracking. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and falls under NAICS code 336310 for motor vehicle parts manufacturing, managed by the Department of Defense's Land Supply Chain.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333612
New
DIBBS
PROPELLER SHAFT WIT
Solicitation # SPE7L1-26-T-944M
The contract pertains to the procurement of a propeller shaft with a universal joint, identified by NSN 3010-01-122-5657 and part number 13026540, supplied by GE Aviation Systems LLC and Whippany Actuation Systems LLC. Eight units are required to be delivered within 165 days from the order date, with delivery terms set as FOB origin and inspection and acceptance occurring at the destination. The items must be packaged in strict compliance with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements take precedence, including adherence to MIL-STD-129 for marking and labeling. Packaging must follow RP001 DLA Packaging Requirements for Procurement and be palletized accordingly. The contract includes mandatory compliance with CMMC Level 2 cybersecurity self-assessment and applies to covered defense information as outlined in RD002. Pricing is fixed at $8.00 per unit for a total of $64.00, with zero variance allowed in quantity. The delivery destination is DLA Distribution Red River in Texarkana, TX, with the required ship date set for February 2, 2027. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List, whose controlling revision depends on the acquisition type and solicitation amendment dates. The contract is issued under solicitation SPE7L1-26-T-944M, with a primary point of contact at DLA for inquiries.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 322219
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L1-26-T-944J
This contract under solicitation SPE7L1-26-T-944J specifies the procurement of 52 units of a COVER, ACCESS item with NSN 5340-01-322-3592, to be delivered FOB origin within 74 days of contract award with no variance allowed in quantity. All items must comply with strict technical, quality, and packaging standards including MIL-STD-2073-1E for preservation and MIL-STD-129 for marking, with no special markings required. The product is classified as a critical application item and must adhere to the technical drawing revision B dated 01/20/2023. Zero tolerance is enforced for non-conformances in sampling, requiring zero defects under MIL-STD-1916 or comparable zero-based plans, with attributes assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The contract prohibits the use of ozone-depleting chemicals and mercury or mercury-containing compounds in any part of the product, preservation, packaging, or marking, with narrow exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and approved chemical reagents, all of which must incorporate secondary containment if used. Packaging must meet DLA’s requirements including palletization and shipping standards, with delivery directed to the specified warehouse in Tracy, CA. The contract enforces configuration change management and requires formal requests for any deviations or waivers. Quality assurance allows for a Certificate of Conformance unless overridden by a Quality Assurance Letter of Instruction. This is a total small business set-aside under NAICS 322219 with full and open competition, and all documentation references the DLA Master List of Technical and Quality Requirements. The delivery deadline is December 6, 2026, with an original ship date of November 3, 2026.
Other Paperboard Container Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-943J
The contract is for a single O-RING with NSN 5331-01-378-8578, required for delivery within 20 days ADO under solicitation SPE7L1-26-T-943J, issued on August 9, 2026, with proposals due by August 20, 2026. The item is to be delivered to Fort Bragg, North Carolina, and the solicitation is managed by the Department of Defense’s Land Supply Chain through Kristina Derry at DLA. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, where technical specifications referenced by R or I numbers are incorporated by full text from the DLA website. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for approved functional uses such as batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, and chemical analysis reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary per NAVSEA 5100-003D. All non-accepted supplies must have government identification removed prior to return, and the NAICS code 339991 applies to this procurement.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-26-T-943K
The contract is for a single helical compression spring identified by NSN 5360-01-248-1585, with a delivery requirement of 10 days after award. The solicitation number is SPE7L1-26-T-943K, issued on August 9, 2026, with responses due by August 20, 2026, under a federal procurement process managed by the Department of Defense’s Land Supply Chain. The item is intended for performance at Fort Bragg, North Carolina, and the procurement falls under NAICS code 332613 for spring manufacturing. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with applicable revisions controlled by the solicitation issuance or award date depending on acquisition type. Packaging must comply with DLA packaging standards and any non-accepted supplies must have government identification removed prior to return. The primary point of contact is Kristina Derry, reachable via email and phone provided, and all relevant information is accessible through the DIBBS portal.
Spring Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7L1-26-T-945T
This contract pertains to the procurement of 50 units of a firearm component identified by NSN/Part Number 0001S00000053 under solicitation SPE7L1-26-T-945T, with a delivery deadline of 300 days after contract award. The item is subject to stringent technical, quality, and compliance requirements under the DLA Master List of Technical and Quality Requirements, including configuration control via engineering change proposals and variance requests. The supplier must meet tailored quality standards applicable to both manufacturers and non-manufacturers and comply with inspection and acceptance procedures conducted at origin. Components must be sourced from qualified products or manufacturers listed on approved QPLs or QMLs, and the supplier must adhere to DLA packaging specifications. The item is classified as a Category I munition, requiring compliance with militarization protocols and the removal of government identification from non-accepted items. The contract imposes strict controls on technical data, classifying it as subject to ITAR or EAR, prohibiting unauthorized export or disclosure to foreign persons regardless of location. Only DLA contractors with JCP certification, completed export control training, and official DLA authorization may access this data. The use of ozone-depleting chemicals is strictly prohibited, and any substitutes require prior approval. The supplier must also maintain CMMC Level 2 certification as a C3PAO and hold phosphate coating supplier certification. All work must comply with the technical and quality provisions referenced in the DLA Master List, with revisions determined by the solicitation issue date. The point of contact for inquiries is Miguel Acevedo, and performance is to occur in New Cumberland, PA.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details