This Solicitation opportunity from Department Of Defense was posted on February 13, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

AAMDS Deveselu Romania

Closed

N6817126QN013Federal

Submission Closed02/17/2026, 11:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336611

New

SLED

F&W, 2018 Munson Packman Boat Repower project

Solicitation # 2018 Munson Packman Boat Repower

The Confederated Tribes of the Colville Reservation is soliciting proposals for the complete repower of a 30 foot Munson landing craft. The selected contractor will be responsible for the decommissioning and removal of two existing Honda BF250A outboard engines and the procurement and installation of two new Honda BF250D Drive-by-Wire outboards. The scope of work is divided into six phases, encompassing structural transom inspections, the installation of Honda iST electronic control heads at dual helm stations, integration with the SeaStar Power Assist steering system, and a comprehensive fuel system overhaul using USCG Type A1-15 lines. The project concludes with NMEA 2000 network integration, digital gauge installation, and a minimum two hour sea trial to validate performance and safety protocols. To ensure factory warranty coverage, the contractor must maintain active Honda Marine Authorized Dealer or Service Center status. The vessel will be delivered via trailer to the contractor facility, which must provide a secure, fenced yard or indoor shop. Award evaluation is based on a weighted criteria of cost, technical expertise, and TERO status, with a preference for Colville Business Enterprises. Proposals must be submitted in PDF format by November 13, 2026. Final contracts are subject to tribal appropriation and may require a performance bond for values exceeding 100,000 dollars or a 25 percent retainage.

Confederated Tribes of the Colville Reservation

POSTED

DEADLINE

CONSOL Station InstallationThis subcontract involves the engineering, fabrication, and installation of three Cargo Operations at Sea receiving stations for prime contractors supporting Military Sealift Command tanker projects. The scope of work includes the installation of receiving stations equipped with ROBB or NATO couplings, as well as the integration of swivel joint assemblies, cleats, staples, and line paddley in accordance with drawing 803-2213159G. Additionally, the contractor is responsible for installing hard points for span wires to ensure full operational functionality. Managed by the Department of Defense through Mschq Norfolk under NAICS code 336611, the project culminates in the delivery of three fully installed and tested receiving stations. The solicitation was posted on October 20, 2026, with a response deadline of November 3, 2026.

POSTED

DEADLINE

Deck Equipment & Towing SystemsThis subcontract opportunity, titled Deck Equipment and Towing Systems, involves providing specialized maintenance and installation services for towing and deck hardware. Working under prime contractors for USCG Surface Force Logistics Center dry-dock projects in San Francisco, the selected provider will be responsible for inspecting towline reels and towing system components, as well as the removal and installation of tow reels utilizing heavy lifting gear. The project is issued by the Department of Homeland Security under agency CG-SEA-C23 and is designated as a total Small Business Set Aside. Interested parties must respond by October 29, 2026, for this requirement categorized under NAICS code 336611.

POSTED

DEADLINE

Engine & Machinery InstallationThis subcontract, titled Engine and Machinery Installation, involves providing specialized technical services for prime contractors on USCG Surface Force Logistics Center dry-dock projects in San Francisco. The scope of work focuses on the removal and installation of primary propulsion and power generation machinery, specifically main diesel engines and reduction gears. Additionally, the contractor is responsible for performing precise laser alignment of engines to MEPS generators and jet drives, ensuring all installed machinery is delivered with completed open and inspect reports. Managed by the Department of Homeland Security under agency CG-SEA-C23, this opportunity is designated as a total Small Business Set Aside under NAICS code 336611. The solicitation was posted on October 20, 2026, with a response deadline of October 29, 2026.

POSTED

DEADLINE

Propulsion & Mechanical Systems (Jet Drives)This small business set-aside subcontract involves the inspection, service, and maintenance of water jet propulsion systems for prime contractors supporting USCG Surface Force Logistics Center dry-dock projects. The scope of work includes the renewal of jet drive anodes and the preservation of water jet drives utilizing specialized tooling, culminating in the delivery of serviced equipment accompanied by detailed open and inspect reports. Managed by the Department of Homeland Security under agency CG-SEA-C23, the work is to be performed in San Francisco, California. The opportunity is categorized under NAICS code 336611, with a response deadline set for October 29, 2026.

POSTED

DEADLINE

USCG STA SAN FRANCISCO (45667) FY27 DD REPAIRS

Solicitation # 70Z04027SSBPL27408

The Department of Homeland Security, through the U.S. Coast Guard Surface Force Logistics Center in Norfolk, Virginia, has issued a Sources Sought Notice under solicitation number 70Z04027SSBPL27408 for market research purposes. The objective is to identify capable sources for the FY27 dry-dock repairs of the USCG STA SAN FRANCISCO (45667), with work scheduled to begin on April 19, 2027. The project is anticipated to have a period of performance of approximately 92 calendar days and must be executed at the contractor's own dry dock facility. If a formal solicitation is issued, the government intends to award one contract on a firm-fixed price basis. This opportunity is designated as a Small Business Set Aside under NAICS code 336611. Interested respondents must submit their capabilities by October 29, 2026, to Troy Elliott. Required submission details include company identification, UEI number, business size certifications, a technical statement on how the work will be performed, and evidence of past performance on projects of similar scope. The government will consider economic factors such as crew lodging, messing, fuel, and travel as part of the award evaluation. Respondents are cautioned that no proprietary or sensitive information should be included in their responses.

POSTED

DEADLINE

Intent to Sole Source: INSTALL RETROFIT KIT ON HPAC #1&2

Solicitation # N4215827QS0002

Norfolk Naval Shipyard intends to sole source solicitation N4215827QS0002 for the installation and testing of input module replacements on the #1 and #2 High Pressure Air Compressors (HPAC) onboard a Virginia Class Submarine. The work is scheduled for a period of performance in March 2027 and will be performed in Portsmouth, Virginia. Award will be based on the Lowest Price Technically Acceptable (LPTA) basis, requiring vendors to be registered in the System for Award Management (SAM) and provide a detailed, unpriced capabilities statement for technical review. Quotes must be submitted in Microsoft Word, Excel, or PDF format and include pricing, business size, payment terms, and a point of contact, with shipping terms specified as FOB Destination. The requirement incorporates various FAR and DFARS clauses, including strict cybersecurity and information safeguarding standards such as NIST SP 800-171 and DFARS 252.204-7012. All technical work must adhere to the provided Statement of Work, and responses are due by October 21, 2026.

Norfolk Naval Shipyard Gf

POSTED

DEADLINE

USCGC CROCODILE DD2 FY27 #1 MDE W5

Solicitation # 70Z08027PBPLCROCODILE

The Department of Homeland Security, through the U.S. Coast Guard Surface Forces Logistics Center, has issued a Sources Sought Notice under solicitation number 70Z08027PBPLCROCODILE to conduct market research for drydock and dockside repairs to the USCGC CROCODILE (WPB-87369). This notice is intended to identify capable sources, determine the availability of suitable commercial items, and understand current commercial practices to inform future competition and set-aside decisions. The anticipated scope of work includes 34 specific items, such as Main Diesel Engine W-5 maintenance, propulsion shaft and rudder assembly renewal, 100 percent underwater body and hull plating preservation, tank cleaning, and the provision of drydocking and sea trial support. The anticipated period of performance is 63 calendar days, scheduled from April 20, 2027, to June 22, 2027. All work is to be performed at the contractor's facility with no geographical restrictions. Interested firms under NAICS code 336611, which has a size standard of 1,300 employees, must submit capability statements, business size certifications, and past performance information by October 21, 2026. This notice does not constitute a formal solicitation or an obligation for the government to take further action, and potential offerors are advised to monitor Sam.gov for any future solicitations.

POSTED

DEADLINE

TRANSMITTER, RUDDER ANG

Solicitation # SPE4A6-26-T-30WD

Solicitation SPE4A6-26-T-30WD is a fixed-price request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of two rudder angle transmitters. The required hardware is identified by NSN 6320002389973 and specifically references Dynalec Corporation part number 2N12TA (IC4BG20-3). This is designated as a critical application item with a required delivery date of January 25, 2028, and a delivery timeline of 487 days after order. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and technical standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Quality assurance will be conducted using zero-based sampling plans per MIL-STD-1916 or ASQ H1331. A significant environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions. Administrative requirements include the use of the Wide Area Workflow system for invoicing and compliance with the Buy American Act and Berry Amendment. Offers involving additive manufacturing are ineligible for award.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

WINDSHIELD WIPER ASSEM

Solicitation # SPE7M4-27-T-0338

Solicitation SPE7M4-27-T-0338 is a fixed-price request for quotations issued by the DLA Weapons Support Fluid Handling Division for one windshield wiper assembly, NSN 2090-01-196-0072, part number KS-9180-G. The requirement specifies a need ship date of February 21, 2027, with an original required delivery date of October 31, 2027. Delivery is established as FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution Warner Robins at Robins AFB, Georgia. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and RP001, with ASTM D3951 serving as the general packaging standard unless superseded by the DLA Master List of Technical and Quality Requirements. Special environmental restrictions prohibit the intentional addition of mercury or mercury-containing compounds to the hardware. Compliance is required for various federal regulations, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-1746

Solicitation SPE7L1-27-T-1746 is a request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of 37 angle valves, identified by NSN 4820002789870. This is a restricted source item designated for critical application, requiring engineering source approval by the Government Design Control Activity. The procurement references Milwaukee Valve Company part numbers 1023-001H-1 1/2 and 1023-001J-1 1/2. Delivery is required within 152 days, with the destination for both inspection and acceptance being the Distribution Depot Puget Sound in Bremerton, Washington. The contract mandates strict adherence to quality and environmental standards, including the prohibition of Class I ozone depleting chemicals and specific restrictions on mercury and mercury-containing compounds per NAVSEA 5100-003D. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various DFARS and FAR clauses regarding cybersecurity, domestic material preferences, and the prohibition of covered defense telecommunications equipment. The acquisition falls under NAICS code 336611.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

CYLINDER, HYDRAULIC ACC

Solicitation # SPE7M0-27-T-0456

This fixed-price solicitation, issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys, is for the procurement of one hydraulic accumulator cylinder (NSN 2090-01-450-1199). The item is to be delivered to the Puget Sound Naval Shipyard IMF in Bremerton, Washington, with an original required delivery date of September 28, 2026. The procurement requires adherence to Technical Data Package Rev A Gen 2 and Basic Drawing NR 53711 6405530 Revision E. Delivery must be made via the fastest traceable means, and the contract specifies destination inspection and acceptance under FAR 52.246-2. The contract mandates strict compliance with several technical and regulatory standards, including MIL-STD-129 for marking, MIL-STD-130 for Item Unique Identification (IUID), and RP001 for DLA packaging requirements. There are significant restrictions on the use of mercury and a requirement for the safeguarding of covered defense information per DFARS 252.204-7012. Additionally, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have approved JCP certification and specific DLA authorizations. Payment and invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 9 days

AI Contract Overview

The contract titled "AAMDS Deveselu Romania" involves the removal and replacement of lagging, with further specifics outlined in an associated work package. It is a solicitation issued by the Department of Defense through the Navsup Flc Sigonella Naples Office, with the place of performance located in Deveselu, Olt, Romania. The solicitation is identified by the number N6817126QN013 and was posted on February 4, 2026, with a response deadline set for February 16, 2026, at 11:00 AM. This contract falls under the NAICS code 336611, and no set-aside provisions are applied. Interested parties must submit a signed Non-Disclosure Agreement (NDA) to access additional references necessary for the work. The primary point of contact is Juan Carlos Tapia, with Antonella De Fraia Frangipane serving as the secondary contact. Correspondence and further information regarding this solicitation are managed through the Navy's supply office located in FPO, AE.

General Info

DoD contract for lagging removal/replacement at Deveselu, Romania; bids due February 16, 2026.

Agency

Department Of Defense → Navsup Flc Sigonella Naples Office

NAICS

336611 - Ship Building and Repairing

Place of Performance

Deveselu, RO-OT, ROU

Set-Aside

NONE

Documents

Amendment 0001 to Solicitation N6817126QN013

2 pages · amendment

High

Navy Standard Items QA Solicitation Checklist

4 pages · qa-solicitation-checklist

High

Solicitation Amendment N6817126QN0130002 - Proposal Due Date Extension

2 pages · amendment

High

Solicitation N6817126QN013 - RFQ for Aegis Ashore Services in Romania

25 pages · rfq

High

Specification NAPL-006-26 for USAAMDS Romania Work

7 pages · specifications

High

Use and Non-Disclosure Agreement for Solicitation N6817126QN013

3 pages · non-disclosure-agreement

High

RFQ N6817126QN013 Pricing Breakdown

1 page · pricing-breakdown

Low

AI Contract Breakdown

Uniform Contract Format

Timeline

2 updates

PhaseClosed

PostedFeb 4

Solicitation

Notice updatedFeb 10

The notice description changed.

Notice updatedFeb 13

Response deadline changed from Feb 16, 2026 to Feb 17, 2026. The notice description changed.

Response DeadlineFeb 17

Deadline has passed

Submission Closed

02/17/2026, 11:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Navsup Flc Sigonella Naples Office

Contacts2 people available

OfficeFPO, AE, 09622-0050, USA

Organization / AgencyDepartment Of Defense → Navsup Flc Sigonella Naples Office

Office AddressFPO, AE, 09622-0050, USA

Contacts

Juan Carlos Tapia

contact@example.gov

Antonella De Fraia Frangipane

contact@example.gov

Full Description

AMENDMENT 0002:

The purpose of this amendment is to extend the proposal due date to 17 Feb 2026 at 12:00. All other information remains the same.

AMENDMENT 0001:

The purpose of this amendment is to update Section "L" paragraph "L-5."

ORIGINAL SOLICITATION:

Remove and replace lagging. See work package for additional details.

Send signed NDA for additional references.

More opportunities from Department Of Defense → Navsup Flc Sigonella Naples Office

Same awarding agency

NAICS: 561990

New

Federal

Gas Free Certification ServicesThis subcontract for Gas Free Certification Services supports prime contractors on NAVSUP Fleet Logistics Center Naples projects within the Department of Defense. The scope of work involves the cleaning and testing of tanks and spaces to ensure they are safe for entry or hot work. To achieve this, the contractor must utilize gas detection equipment and ventilation blowers in strict accordance with USCG and OSHA Subparts 1915.11, 1915.12, and 1915.13, ultimately delivering signed Gas Free Certificates. The project will be performed in Gaeta under NAICS code 561990. Interested parties must submit their responses by the deadline of November 2, 2026, at 13:00:00Z.

All Other Support Services

POSTED

DEADLINE

Hazardous Waste Management & DisposalThis subcontract for Hazardous Waste Management and Disposal supports prime contractors on NAVSUP Fleet Logistics Center Naples projects located in Gaeta. The scope of work involves the identification, testing, handling, and disposal of hazardous wastes, utilizing certified laboratories for chemical analysis. All operations must be conducted in strict accordance with RCRA, EPA SW-846, and OPNAVINST 5090.I.C standards. The selected provider is responsible for managing waste via Uniform Hazardous Waste Manifests and delivering final disposal certificates. This opportunity falls under NAICS code 562910 and is issued by the Department of Defense through the Navsup Flc Sigonella Naples Office. Responses are due by November 2, 2026.

POSTED

DEADLINE

Thermal Insulation and LaggingThis subcontract involves the supply and installation of miscellaneous thermal insulation and lagging for prime contractors supporting NAVSUP Fleet Logistics Center Naples projects. The work will be performed in Gaeta and must strictly adhere to several technical standards, including ABS Rules for Steel Vessels, ASTM 683, MIL-STD-869, NAVSEA STD DW 804-5959214, and NSTM 221. Managed by the Department of Defense under the Navsup Flc Sigonella Naples Office, the project falls under NAICS code 238160. The solicitation was posted on October 19, 2026, with a response deadline set for November 2, 2026.

POSTED

DEADLINE

Topside Preservation and PaintingThis subcontract for Topside Preservation and Painting involves the surface preparation and painting of 3,000 square feet of vessel topside for prime contractors supporting the Department of Defense via the Navsup Flc Sigonella Naples Office. The scope of work includes the delivery of fully preserved and painted surfaces, the recording of markings and placards, and the management of liquid waste disposal. Additionally, the contractor is responsible for providing all necessary lighting and ventilation required for the coating application process. Performance of these services will take place in Gaeta and must strictly adhere to US Coast Guard regulations and COLREGS Navigation standards. The project is categorized under NAICS code 238160, with a response deadline set for November 2, 2026.

POSTED

DEADLINE

Barometer Calibration & RepairThis subcontract involves the examination, testing, and calibration of Aeroid ML-448/UM barometers for prime contractors supporting NAVSUP Fleet Logistics Center Naples projects. The scope of work includes replacing essential components such as seals, packing, gaskets, mounts, and fasteners, with all calibrations performed to a transfer measurement standard traceable to NIST. The place of performance for these services is located in Gaeta. To qualify, the contractor must hold ISO/IEC 17025:2017 certification and maintain strict adherence to ANSI and ISO requirements. Final deliverables for the project consist of the calibrated barometer and a detailed condition report provided in PDF format. The opportunity is categorized under NAICS code 811210 and is managed through the Department of Defense.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

U.S. NAVY VESSEL VOYAGE REPAIR AVAILABILITY (VRA)

Solicitation # N6817127QN004

The U.S. Navy, through the Navsup Fleet Logistics Center Naples, is soliciting a Firm-Fixed-Price contract for a Vessel Voyage Repair Availability (VRA) for the USS Mt Whitney (LCC 20). The work will be performed in Gaeta, Italy, with a period of performance from December 1, 2026, through December 15, 2026. The scope of work includes 10 Category A work items and 3 Not Separately Priced (NSP) items, featuring tasks such as barometer calibration, steel repairs, fire room drain piping repairs, LPAC hose hydrostatic testing, and insulation repairs. The contractor must adhere to strict technical standards, including MIL-STD-869 for thermal insulation, ANSI and ISO requirements for calibration, and US Coast Guard and COLREGS Navigation regulations. Award will be based on the Lowest Price Technically Acceptable (LPTA) basis. To be considered, quoters must be rated acceptable regarding their technical capability, which requires providing proof of ISO 9001 or 14001 Quality Management Systems, ABS welding certifications, and laboratory qualifications for calibration. The contract emphasizes rigorous safety and environmental compliance, requiring certified Marine Chemists for gas-freeing and strict adherence to international and local regulations for the handling and disposal of hazardous materials. Invoicing must be processed electronically via Wide Area Work Flow (WAWF). Quotes are due by November 2, 2026, and must include completed Standard Forms 18 and 30, along with specific representations and certifications regarding tax status and defense telecommunications equipment.

Ship Building and Repairing

POSTED

DEADLINE

I-Level Dive Planning & Underwater Repair CoordinationThis subcontract for I-Level Dive Planning and Underwater Repair Coordination supports the Navsup Flc Sigonella Naples Office within the Department of Defense. The selected provider will plan and coordinate underwater ship repair and inspection activities for prime contractors, delivering essential dive plans, coordination logs, and data entries. Performance of these duties takes place in Capodichino and requires the use of the M Systems Environment program suite to provide technical guidance for vessel and OPW shop work. Qualified personnel must possess a Secret security clearance and demonstrate proficiency in JFMM CASREP handling procedures. The opportunity was posted on September 18, 2026, with a response deadline of October 23, 2026. This requirement falls under NAICS code 541330, focusing on engineering and technical coordination for naval vessel maintenance.

POSTED

DEADLINE

METCAL Program SupportThe METCAL Program Support subcontract involves providing technical support and logistics for the Navsup Flc Sigonella Naples Office. The primary objective is to calibrate shipboard instruments and equipment using precision tools to maintain strict accuracy and compliance with Navy standards. Key deliverables include the provision of calibrated equipment certifications and detailed METCAL compliance reports. This opportunity is categorized under NAICS code 811310 and requires personnel to hold a Secret security clearance. The work is to be performed in Capodichino, with a response deadline set for October 23, 2026.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

HM&E Engineering Technical Support (Mechanical/Hydraulics)This subcontract for HM&E Engineering Technical Support provides comprehensive mechanical and hydraulics services for prime contractors supporting the Navsup Flc Sigonella Naples Office. The scope of work includes the installation, maintenance, assessment, troubleshooting, repair, testing, and logistics of Hull, Mechanical, and Electrical systems, with a specific focus on Mechanical Auxiliary systems, Mechanical Hydraulics, and Marine Gas Turbine inspections. The primary objective is the delivery of certified operational HM&E systems and detailed inspection reports. The project is performed in Capodichino under NAICS code 541330 for the Department of Defense. Due to the nature of the work, personnel are required to maintain a Secret security clearance. The response deadline for this opportunity is October 23, 2026.

POSTED

DEADLINE

Combat Systems Technical Support (CANES/Afloat Network)This subcontract for Combat Systems Technical Support focuses on the installation, maintenance, and repair of Combat Systems for the Navsup Flc Sigonella Naples Office. The scope of work includes system and database administration for CANES and SPY systems, specifically involving the monitoring and control of privileged systems on SIPRnet. The contractor is responsible for delivering operational Afloat Networks and detailed technical reports. The project is located in Capodichino and falls under NAICS code 541512. Due to the sensitive nature of the work, personnel must possess a Top Secret clearance and Information Assurance Technical Level 1 certification. The response deadline for this opportunity is October 23, 2026.

Computer Systems Design Services

POSTED

DEADLINE

FDRMC ENGINEERING SUPPORT SERVICES

Solicitation # N6817126RN005

The Department of Defense, through the Navsup Flc Sigonella Naples Office, is soliciting proposals for FDRMC Engineering Support Services under a Cost Plus Fixed Fee task order via SeaPort NxG. This unrestricted solicitation, number N6817126RN005, requires the contractor to provide full-time equivalent on-site technical support personnel to the Forward Deployed Regional Maintenance Center and various ships within its area of responsibility. The scope of work includes installation, maintenance, assessment, troubleshooting, repair, testing, training, and logistics support for shipboard systems, specifically focusing on engineering technicians for mechanical auxiliary, hydraulics, gas turbines, and combat systems, as well as production support for long-range repair planning and specification development. The contract structure consists of a base period and four option periods, with an additional six-month extension, totaling an estimated effort of 96,096 man-hours. Performance is primarily located in Capodichino, Campania, with specific labor requirements for Bahrain and Rota. Due to the nature of the work, personnel must hold a Secret security clearance, while Combat Systems Technicians for CANES/Afloat Network require Top Secret clearance and SIPRnet access. Award will be based on best value, utilizing a two-phased evaluation process that assesses facilities security clearance and essential services compliance before evaluating technical approach, management, personnel, transition plans, past performance, and cost. Performance will be monitored via a Quality Assurance Surveillance Plan using methods such as 100 percent inspection and random sampling to ensure compliance with Joint Fleet Maintenance Manual and OSHA standards.

POSTED

DEADLINE

PSB Operational Coordination & Communications SupportThe contract entails real-time coordination and communications support between the contractor and the U.S. Navy to facilitate the timely and accurate operation of PSB gates. This includes continuous monitoring and communication via radio and telephone to confirm operational readiness prior to each event, as well as immediate reporting of activities and any irregularities during gate operations. The work is critical to ensuring seamless and secure movement through the PSB facility and requires constant vigilance, reliable communication protocols, and strict adherence to Navy procedures. Performance is exclusively located in Gaeta, with the work being managed under the Naval Supply Systems Command Fleet Logistics Center Sigonella Naples Office. This subcontract falls under NAICS code 561320, indicating it is related to administrative management and support services, specifically tailored to defense-related logistical operations. The contract is structured to support ongoing military readiness efforts and demands a high degree of responsiveness, coordination, and operational discipline from the contractor at all times.

Temporary Help Services

POSTED

3 months ago

DEADLINE

N/A

View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS