Top

Abrasive Belt Grinder

Active

W911S226U3480Federal

Response Deadline06/30/2026, 01:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

The Abrasive Belt Grinder specified under solicitation W911S226U3480 is a precision industrial machine designed for high-performance grinding applications, requiring a 5 HP, 3600 RPM, 184T frame, TEFC motor capable of operating on 208, 230, or 460 VAC three-phase 60 Hz power, with the final voltage selected at time of order. It must be equipped with a full voltage magnetic pushbutton starter and integrated motor overload protection housed in a NEMA 4 enclosed control system. The grinder utilizes 1 inch by 90 inch abrasive belts with air-assisted tensioning and features a swing frame-style guard with a 4-inch exhaust outlet for dust collection, though no dust collector is provided. A 6-inch crowned aluminum drive pulley delivers a belt speed of approximately 5500 feet per minute, paired with an 8-inch diameter by 1-inch wide, 90 durometer serrated contact wheel. Belt tracking is manually adjustable via a front-mounted knob accessible during operation, and T-style handle bars ensure operator stability. The system includes an air assist cylinder with a manual hand valve for adjustable grinding pressure using standard castings, and an adjustable gage wheel beside the contact wheel to precisely control grinding depth. An equivalent lathe attachment fixture model M-12468-D is required for versatility, and the entire unit must be delivered fully assembled and ready for operation, excluding abrasive belts and dust collection equipment. This solicitation is a total small business set-aside under NAICS code 327910, awarded by the U.S. Army at Fort Drum, New York, with responses due by June 30, 2026, and technical compliance as the sole criterion for acceptance.

General Info

5 HP abrasive belt grinder with 5500 FPM speed, air tensioning, NEMA 4 control, and M-12468-D lathe fixture, fully assembled, small business set-aside.

Agency

Department Of Defense → W6QM Micc-Ft DrumView Agency

NAICS

327910 - Abrasive Product ManufacturingView NAICS

Place of Performance

CRANE ARMY AMMUNITION ACTIVITY300 HW 361 BLDG 148CRANE, INDIANA 47522NO FRIDAY DELIVERY, NY, 47522

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis

PostedJun 23

Combined Synopsis

Response DeadlineJun 30

Submission deadline

Response Deadline

06/30/2026, 01:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Defense → W6QM Micc-Ft Drum

Contacts1 person available

OfficeFORT DRUM, NY, 13602-5220, USA

Organization / Agency

Department Of Defense → W6QM Micc-Ft Drum

View Agency Profile

Office AddressFORT DRUM, NY, 13602-5220, USA

Contacts

Kyle Brown

contact@example.gov

+1 (555) 000-0000

Full Description

Salient Characteristics ? Abrasive Belt Grinder Model B-190-5-GW-AA-LAF EquivalentThe following salient characteristics define the minimum acceptable requirements for an Abrasive Belt Grinder. Any offered product must meet or exceed all characteristics listed to be considered technically acceptable.1. Motor SpecificationsUnit shall include a 5 HP, 3600 RPM, 184T frame, TEFC motor.Motor must operate on 208, 230, or 460 VAC, 3 phase, 60 Hz power.Final operating voltage will be identified at time of order.2. Starter and ControlsMust include a full voltage magnetic pushbutton starter.Must include integrated motor overload protection.Controls must be housed in a NEMA 4 enclosure.3. Abrasive Belt TensioningGrinder must use abrasive belts sized 1 inch by 90 inches.System must include air assisted belt tensioning.4. Belt Guard and Dust Collection InterfaceMust include a swing frame style abrasive belt guard.Guard must include a 4 inch diameter exhaust outlet compatible with standard dust collection systems.Dust collector is not included.5. Drive PulleyMust include a 6 inch crowned aluminum drive pulley.Pulley must deliver approximately 5500 feet per minute abrasive belt speed.6. Contact WheelMust include an 8 inch diameter by 1 inch wide, 90 durometer, serrated face contact wheel.7. Belt Tracking AdjustmentBelt tracking must be adjustable using a front mounted tracking knob accessible during operation.8. Operator Handle BarsGrinder must include T style handle bars for operator control and stability.9. Air Assist Grinding PressureSystem must include an air assist cylinder with a manual hand valve.Must allow adjustable grinding pressure using standard castings.10. Lathe Attachment FixtureMust include an adjustable height lathe attachment fixture equivalent to model M-12468-D.11. Adjustable Gage WheelMust include an adjustable gage wheel positioned beside the contact wheel to control grinding depth.12. Operational ReadinessEquipment must be delivered fully assembled and ready for operation.Abrasive belts and dust collection equipment are not included.