This Solicitation opportunity from Government of Canada was posted on March 26, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Achat d'une rétrocaveuse

Closed

20132045International

Submission Closed04/02/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333120

New

SLED

6-Ton Class Compact Excavator SupplyThe contract calls for the supply of a new 6-ton class compact excavator equipped with a Tier 4 diesel engine, hydraulic quick coupler, high-flow hydraulics, and a standard bucket, all configured and ready for immediate operation. The equipment must meet specified performance and compliance standards to ensure durability, efficiency, and environmental suitability under operational conditions. This is a subcontract procurement issued by the Mississippi Department of Finance and Administration under the NAICS code 333120, indicating classification within construction machinery manufacturing. The solicitation was posted on July 24, 2026, with a response deadline of August 14, 2026, giving potential suppliers approximately three weeks to submit proposals. The place of performance and point of contact details are not specified in the available data, and there is no set-aside designation indicated for small businesses or other categories. Interested parties must review the official bid details through the provided link to Mississippi’s contract bid search portal to access full submission requirements, evaluation criteria, and technical specifications necessary for compliance and competitive bidding.

POSTED

DEADLINE

5-Ton Class Compact Excavator SupplyThe contract mandates the supply of a new 5-ton class compact excavator equipped with a Tier 4 diesel engine, a hydraulic quick coupler, high-flow hydraulics, and a standard bucket, all configured and ready for immediate operational use. The equipment must meet all technical specifications to ensure compatibility, performance, and compliance with environmental and operational standards. The solicitation is issued as a subcontract under NAICS code 333120, associated with the Mississippi Department of Finance and Administration (MPTAP), and is open for responses until August 14, 2026, with the request publicly posted on July 24, 2026. No set-aside designation is specified, and the place of performance details are not provided, leaving the ultimate delivery location to be determined by the awarding entity. The contract is part of a state-level procurement process, with all inquiries and submissions managed through the official Mississippi government contract portal.

POSTED

DEADLINE

Supply of 4-Wheel Drive Diesel Scissor LiftThe contract calls for the procurement and delivery of a new 4-wheel drive diesel-powered scissor lift designed to meet OSHA and ANSI safety standards for operation at the Greenville Port Terminal. The equipment must be capable of handling the demanding environment of a port facility, ensuring reliability, durability, and compliance with all relevant industrial safety regulations. The item is classified under NAICS code 333120, indicating it falls within the industrial machinery manufacturing sector, and the procurement is structured as a subcontract under the MPTAP agency, which is affiliated with the state of Mississippi. The solicitation was posted on July 24, 2026, with responses due by August 19, 2026, providing potential vendors a 27-day window to submit proposals. While specific details such as point of contact, delivery address, and set-aside conditions are not provided, the place of performance is explicitly tied to the Greenville Port Terminal, emphasizing the critical operational context. The contract is accessible via a public link hosted on the Mississippi state website, ensuring transparency in the bidding process and enabling qualified suppliers to review requirements and prepare submissions accordingly.

POSTED

DEADLINE

Purchase Two (2) New Heavy Duty Backhoe LoadersMetra is seeking bids for two new, unused, current-production heavy-duty backhoe loaders equipped with integrated backhoe attachments and hydraulic systems designed for continuous municipal and utility maintenance operations. The solicitation, identified as IFB No. 213054, was posted on July 24, 2026, with responses due by 7:00 PM on August 25, 2026. Bids must be submitted through the designated platform, and the opening will occur via Microsoft Teams using the provided link. The equipment is required to meet rigorous performance standards suited for demanding public works environments in Illinois. The contract does not specify a set-aside designation or NAICS code, and performance is expected to take place within the state of Illinois. All inquiries and submissions should be directed through the official Metra procurement portal listed in the solicitation.

POSTED

DEADLINE

Mobile Concrete Batch Plant Supply and DeliveryThe contract requires the supply, transportation, and delivery of a self-erecting, towable Mobile Concrete Batch Plant that meets military standards to Nellis Air Force Base with a delivery deadline of 180 days after award. The equipment must be fully functional, transportable, and compliant with all applicable defense specifications for deployment in operational environments. The solicitation is a Total Small Business Set-Aside under the SBA program, restricting eligibility to small businesses only, and is classified under NAICS code 333120 for construction machinery manufacturing. Proposals must be submitted by August 28, 2026, and the place of performance is designated as Nellis AFB with a zip code of 89191. The contracting agency is the Department of Defense under FA4861 99 Cons Lgc, and the acquisition is being managed under a subcontract structure with no specific point of contact listed publicly.

POSTED

DEADLINE

Commercial Off-the-Shelf Front End Loader SupplyThe contract seeks the supply of a single new 4-wheel drive front end loader, specifically a CAT 926M or an equivalent model, that must meet U.S. EPA Tier 4 Final and EU Stage V emissions standards to ensure compliance with stringent environmental regulations. This is a commercial off-the-shelf procurement under a subcontract structure, reserved entirely for small businesses as designated by the Small Business Administration under the Total Small Business Set-Aside provision. The North American Industry Classification System code 333120 applies, indicating this relates to construction machinery manufacturing. The solicitation was posted on July 24, 2026, with responses due by August 3, 2026, at 9:00 PM Eastern Time. The contracting agency is the Idaho State Office of the Department of the Interior, though no specific location for performance or point of contact is provided in the available data. The procurement is accessible via the SAM.gov platform for interested vendors.

POSTED

DEADLINE

Technical Compliance and Manufacturer CertificationThe contract requires the submission of detailed manufacturer specifications, emissions compliance documentation certifying adherence to EPA Tier 4 standards, and comprehensive technical data sheets to demonstrate that all equipment fully satisfies the solicitation’s technical and regulatory requirements. This effort is critical to validating that the delivered equipment meets federal environmental and performance benchmarks, ensuring compliance with applicable environmental protections and operational mandates. All documentation must be accurate, complete, and directly tied to the equipment being offered to avoid disqualification or compliance failures. This is a subcontract under a Total Small Business Set-Aside classification, meaning only small businesses as defined by the SBA are eligible to respond. The action falls under NAICS code 333120, which classifies the industry as Construction Machinery Manufacturing, indicating the equipment in question likely includes heavy machinery used in construction or public works. The solicitation was posted on July 24, 2026, with a firm response deadline of August 4, 2026, at 2:00 PM. The contracting office is part of the Department of the Interior’s NPS Conops Strategic division, signaling the equipment will support federal land management or conservation operations. There is no designated point of contact listed, and the performance location is unspecified, though the work is presumed to involve documentation submission rather than physical delivery.

Nps Conops Strategic DOI

POSTED

DEADLINE

Brush Wood Chipper with Winch SupplyThe contract seeks the supply of a new or like-new brush wood chipper equipped with a winch, designed for vegetation management operations at Golden Gate National Recreation Area. The equipment must comply with EPA Tier 4 emissions standards and satisfy Buy American Act requirements, ensuring environmental compliance and domestic manufacturing adherence. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 333120 identifying it under the construction machinery manufacturing sector. Proposals must be submitted by the deadline of August 4, 2026, with the opportunity posted on July 24, 2026. The contracting entity is the National Park Service through the Department of the Interior, though specific location and point of contact details are not provided. The equipment will support critical land management efforts in a federally protected area, emphasizing operational efficiency and regulatory compliance.

Nps Conops Strategic DOI

POSTED

DEADLINE

John Deere Grader Replacement PartThe solicitation for the John Deere Grader Replacement Part under number FA500426QA004 has been amended to extend the quote submission deadline from Friday, 24 July 2026 at 1:00 PM AST to Friday, 31 July 2026 at 1:00 PM AST, allowing vendors additional time to prepare accurate responses. All other terms, conditions, and requirements of the original solicitation remain unchanged. This is a Total Small Business Set-Aside under FAR 19.5, classified under NAICS code 333120, exclusively for small businesses. The solicitation is issued by the Department of Defense through the agency office located at Eielson Air Force Base, Alaska, with the place of performance also in Alaska, ZIP 99702. Primary point of contact is Kasualla Lewis, reachable at 907-375-5380 or kasualla.lewis@us.af.mil, with Ryan Baudouin as the secondary contact. The solicitation was posted on 24 July 2026 and is accessible via the SAM.gov platform.

POSTED

DEADLINE

FPC Alderson - Commercial Snow Removal Equipment & InstallationThis solicitation, numbered 15B10126Q00000031, is a combined synopsis and request for quotes for the procurement and installation of commercial-grade snow removal equipment under FAR Part 12, with no separate written solicitation to be issued. The requirement is set aside exclusively for small business concerns, as defined by NAICS code 333120 with a size standard of 1,250 employees. Offerors must submit quotes for the specified equipment or alternative models of equal or superior quality, accompanied by comprehensive documentation proving equivalency. All quotations must include detailed specification sheets and product submittals, and each offeror must be registered in SAM.gov with all required representations and certifications completed at the time of submission. Delivery and installation are to occur at 1 Glen Ray Road, Alderson, WV, or alternatively at the contractor’s facility if located within a 50-mile radius, provided coordination with the designated government representative is arranged. The government retains the right to inspect all equipment and installations, and any nonconforming items or work must be corrected by the contractor at no additional cost. Quotes must be submitted via email to arhedrick@bop.gov no later than August 7, 2026, at 2:00 PM EST; faxed or hand-delivered submissions will not be accepted. Questions must be submitted in writing by August 3, 2026, at 12:00 PM EST. Awards will be made on a firm-fixed-price basis, evaluated across price, technical acceptability, warranty, past performance, and adherence to delivery timelines, with a history of default or poor performance serving as grounds for rejection.

POSTED

DEADLINE

Loader, Front End - 1 each - delivered - BLM IDThe contract is for the procurement of one front end loader, to be delivered under a total small business set-aside as defined by the Small Business Administration, specifically targeting businesses classified under NAICS code 333120 for construction machinery manufacturing. The solicitation, numbered 140L2626Q0051, was posted on July 24, 2026, and responses are due by August 3, 2026, at 9:00 PM Eastern Time. The contracting office is the Idaho State Office of the Department of the Interior, located in Boise, Idaho, with a ZIP code of 83709. The place of performance is not specified beyond the agency’s location, and delivery is expected to be completed at the discretion of the awardee. Primary point of contact for inquiries is Charles Dodson, reachable by phone at 208-769-5008 or via email at cdodson@blm.gov. The contract is listed as a combined solicitation, indicating it may include elements of both a request for proposal and an invitation for bid. Interested vendors must be certified small businesses as defined by the SBA to qualify for award.

POSTED

DEADLINE

Skid Steer and Attachments The contract titled Skid Steer and Attachments under solicitation number W911S26U3785 is a combined solicitation set aside exclusively for small businesses as defined by the SBA. It pertains to the procurement of a skid steer equipped with necessary attachments including a snow plow, bucket, forks, and material arm, with corrections made to ensure the correct attachments are provided. The delivery is required no later than 60 days from the contract award, with an additional one-day extension granted to accommodate necessary adjustments. The action is being managed by the Department of Defense through the Office of W6QM Micc-Ft Drum located in Fort Drum, New York, and the place of performance is listed as 22211. The solicitation was posted on July 24, 2026, with responses due by July 29, 2026. Marisol Lacour serves as the primary point of contact and can be reached at marisol.c.lacour.mil@army.mil for inquiries related to this procurement.

W6QM Micc-Ft Drum

POSTED

3 days ago

DEADLINE

in 3 days

AI Contract Overview

The Municipality of Saint-Lambert-de-Lauzon is soliciting bids for the purchase of a new backhoe loader. Interested bidders must obtain the full tender documents from the SÉAO website or by phone, with the acquisition of documents subject to fees. Each bidder is required to submit a single offer that complies with all tender specifications and includes the provided forms. Proposals must be submitted by 11 a.m. on April 2, 2026, to the Municipality's office at 1200, rue du Pont, Saint-Lambert-de-Lauzon, Quebec, with a public opening of bids immediately following at the same location. The contract is governed by the Quebec-Ontario Trade and Cooperation Agreement as well as the Canadian Free Trade Agreement. The Municipality is under no obligation to accept the lowest or any bid and assumes no responsibility for costs incurred by bidders in preparing or submitting proposals. The contract notice was issued on March 26, 2026, with the contracting authority identified as Steeve Veilleux. The procurement process takes place within the Chaudière-Appalaches region, and all submissions must adhere to the specified requirements to be considered.

General Info

Saint-Lambert-de-Lauzon seeks bids for backhoe loader purchase; submit by April 2, 2026.

Agency

Government of Canada → Municipalité de Saint-Lambert-de-Lauzon .

NAICS

333120 - Construction Machinery ManufacturingView NAICS

Place of Performance

Chaudière-Appalaches, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMar 26

Solicitation

Response DeadlineApr 2

Deadline has passed

Submission Closed

04/02/2026, 04:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Municipalité de Saint-Lambert-de-Lauzon .

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → Municipalité de Saint-Lambert-de-Lauzon .

Office AddressN/A

Contacts

Steeve VeilleuxContracting Authority

Full Description

AVIS D'APPEL D'OFFRES PUBLIC ACHAT D’UNE RÉTROCAVEUSE (SLDL-26004) La Municipalité de Saint-Lambert-de-Lauzon demande des soumissions pour l’achat d’une rétrocaveuse neuve. Les documents complets d’appel d’offres seront disponibles au site Internet de SÉAO à l’adresse www.seao.ca ou au 1 877 336-7326. L’obtention des documents est sujette à la tarification de cet organisme. Chaque soumissionnaire doit présenter une seule offre en se conformant aux exigences des documents d’appel d’offres et en utilisant les formulaires qui y sont inclus. Les soumissions doivent être reçues au plus tard à 11 h le 2 avril 2026 au bureau de la Municipalité situé au 1200, rue du Pont, Saint-Lambert-de-Lauzon (Québec) G0S 2W0. La séance d’ouverture publique des soumissions aura lieu immédiatement après au même endroit. Le présent contrat est assujetti à l’Accord du commerce et de coopération entre le Québec et l’Ontario (ACCQO) et l’Accord de libre-échange canadien (ALEC). La Municipalité ne s’engage pas à accepter la soumission la plus basse, ni aucune des soumissions reçues et n’encourt aucune responsabilité envers le ou les soumissionnaire(s) pour la préparation et le dépôt des soumissions. Donné à Saint-Lambert-de-Lauzon, le 18 mars 2026 Éric Boisvert, avocat, OMA Directeur général et greffier-trésorier