Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

ACTUATOR, ELECTROMEC

Active
SPE7MC-26-T-167YFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of one actuator, electromechanical, identified by NSN 4810-01-558-6065 and part number MS5Q, supplied by Curtiss-Wright Flow Control Corporation and Emerson Automation Solutions. The item is classified as a USML item requiring total mutilation to the point of scrap worldwide upon obsolescence or end of life, in accordance with Note 7. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with compliance determined by the master revision effective on the solicitation issue date or award date. The contract mandates strict adherence to DLA packaging standards under RP001 and MIL-STD-2073-1E, including preservation methods, cushioning, wrappings, and container selection to prevent corrosion, damage, or deterioration during storage and transit. All bare metal surfaces must be adequately preserved for at least one year, and dissimilar metals must be isolated to avoid galvanic corrosion. The item must be individually preserved, wrapped, cushioned, and packed per specified materials and methods, with packaging designed to immobilize the item and ensure even weight distribution. Marking must conform to MIL-STD-129 without special marking codes. Delivery is required FOB destination within 20 days, with no variance allowed in quantity, and both inspection and acceptance occur at origin. The shipment must meet Cybersecurity Maturity Model Certification Level 2 self-assessment requirements, and covered defense information applies. The delivery address is DLA Distribution Yokosuka, Japan, with a FPO shipping address in the United States, and transportation procedures follow DLAD Proc Notes C19 and C20. The item is subject to the removal of government identification from non-accepted supplies and requires compliance with federal procurement regulations. The solicitation number is SPE7MC-26-T-167Y, with a response deadline of August 17, 2026, and an original required delivery date of July 2, 2026. The point of contact is Paula Mcclary at DLA, and the contract falls under NAICS code 336413 for aerospace product and parts manufacturing.

General Info

Procure one USML electromechanical actuator with strict packaging, preservation, and cybersecurity requirements, delivered FOB destination to Japan by July 2, 2026.

Agency

Department Of Defense → YOKOSUKA JAPAN CML PHNView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

PSC 473 BOX 11, FPO, AP, 96349-0011, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7MC-26-T-167Y for Maritime Hardware/Electrical

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → YOKOSUKA JAPAN CML PHN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → YOKOSUKA JAPAN CML PHN
View Agency Profile
Office AddressUS
Contacts
Paula Mcclary
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ACTUATOR,ELECTROMEC
ACTUATOR,ELECTRO-ME
USML ITEM MUTILATION TO THE POINT SCRAP REQUIRED WORLDWIDE. (NOTE 7).
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
CURTISS-WRIGHT FLOW CONTROL CORPORATION 63600 P/N 0511-25-S704-100 CURTISS-WRIGHT FLOW CONTROL CORPORATION 63600 P/N MODEL MS05 CURTISS-WRIGHT FLOW CONTROL CORPORATION 63600 P/N MS5Q EMERSON AUTOMATION SOLUTIONS FINAL 1X5W8 P/N MS5Q
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017733323 0001 EA 1.000
NSN/MATERIAL:4810015586065
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
SPE7MC-26-T-167Y
SECTION B
PR: 7017733323 PRLI: 0001 CONT’D
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:49
WRAP MAT:GC CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:C
UNIT CONT:ED OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ITEM SHALL BE INDIVIDUALLY AND PROPERLY PRESERVED, WRAPPED, CUSHIONED, AND PACKAGED AS SPECIFIED IN THE PREP FOR DELIVERY PACKAGING REQUIREMENTS TO PREVENT DAMAGE, CORROSION, AND/OR DETERIORATION. ALL BARE METAL SHALL BE PROPERLY PRESERVED TO PREVENT CORROSION. CUSHIONING MATERIAL SHALL LIFT PROTRUSIONS AWAY FROM CONTAINER TO ENSURE IT DISPLACES ITEM WEIGHT EVENLY. ANY LOOSE ITEMS WHICH HAVE DISSIMILAR METALS SHALL BE SEPARATED AND SHALL NOT MAKE CONTACT WITH EACH OTHER TO PREVENT CORROSION DURING STORAGE. PACKAGE DESIGN SHALL IMMOBILIZE ITEM WITHIN CONTAINER TO ADEQUATELY PACKAGE AND PROTECT ITEM. UNIT CONTAINER SELECTION SHALL ADEQUATELY CONTAIN MATERIAL.
NOTE: ANY APPLICATION OF PRESERVATIVE MATERIAL SHALL BE ADEQUATE FOR STORAGE TO PREVENT CORROSION FOR A MINIMUM OF ONE YEAR WHEN ASTM D3951 IS CITED WITHIN CONTRACT.
PARCEL POST ADDRESS:
SW3142
DLA DISTRIBUTION YOKOSUKA JAPAN
CML PHN 011 81 46 816 5175 OR 8339
PSC 473 BOX 11
FPO AP 96349-0011
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3142
DLA DISTRIBUTION YOKOSUKA JAPAN
FLT ACT YOKOSUKA 01181468165175
HONCHO 1 CHOME YOKOSUKA SHI B 5010
YOKOSUKA 238-0041
JP
M/F: (TCN) N6911761815549
RDD:
PROJ: 770 TP 3
SUPP ADD: SW3142 SIG: J
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A01 DIST: 3B ADV: FC: J3
Need Ship Date:00/00/0000 Original Required Delivery Date:07/02/2026
SPE7MC-26-T-167Y
SECTION B
PR: 7017733323 PRLI: 0001 CONT’D
SPE7MC-26-T-167Y NSN/Part Number: 4810-01-558-6065 Quantity: 1 EA Purchase Request: 7017733323QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
First Article Testing (FAT) and Government Approval CoordinationThe contract requires the production and delivery of two rail assembly units specifically for First Article Testing conducted by the government at Warner Robins Air Force Base, with full responsibility for all associated documentation, logistics, and coordination with the 402 MXSG/MXRILM test laboratory. The work must adhere to strict government testing protocols and ensure complete compliance with all technical and administrative requirements necessary for official approval. The successful bidder must demonstrate the capacity to deliver high-precision components within the specified timeframe while maintaining rigorous quality control and documentation standards. This is a small business set-aside subcontract under NAICS code 336413, awarded by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance located at Robins AFB, Georgia, 31098-1887. Responses must be submitted by August 17, 2026, and the solicitation is publicly available through the DIBBS platform. All activities must be executed in alignment with federal acquisition regulations and small business set-aside guidelines, ensuring the subcontractor qualifies as a total small business as defined by the SBA.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Aerospace Structural Support Component SupplyThe contract calls for the supply of four structural support components identified by NSN 1560-01-650-4509, specifically for use on U.S. Navy vessels, with strict adherence to MIL-STD-129 standards for packaging and labeling to ensure compatibility with military logistics systems. Delivery of all components must be completed within five days of order issuance to support timely deployment schedules, reflecting the urgent operational nature of the requirement. The components are classified under NAICS code 336413, indicating they relate to aerospace product and part manufacturing, and are procured under a subcontract arrangement by the Aviation Supply Chain ESOC Buys division within the Department of Defense. The solicitation was posted on August 9, 2026, with a response deadline of August 17, 2026, and the place of performance is designated as FPO with ZIP code 96632, a common designation for military mail addressed to fleet units. The contract is part of a broader defense supply initiative managed through the DLA’s DIBBS platform, and compliance with all technical and logistical specifications is mandatory to meet deployment timelines and operational readiness standards. No specific set-aside or small business preference is indicated, and the procurement is directed toward qualified suppliers capable of rapid fulfillment under exacting military standards.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Strip Wing Manufacturing and SupplyThe contract mandates the manufacture and delivery of one Strip Wing identified by NSN 1560-01-608-2561, requiring full compliance with DLA technical specifications, MIL-STD-129 marking and packaging standards, and origin inspection protocols to ensure readiness for military use. The item must be produced and shipped to Robins AFB, Georgia, with the delivery location specified by the ZIP code 31098-1887, and all work must align with quality and traceability requirements dictated by the Department of Defense. This is a subcontract under NAICS code 336413, posted on August 9, 2026, with responses due by August 17, 2026. The contract is managed by the ASC Commodities Division and is exclusively for fulfillment through the DIBBS platform, where detailed solicitation documents can be accessed. No set-aside status or specific organization type is designated, and while no point of contact is listed, all technical and administrative inquiries must be directed through the provided DIBBS interface.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Supply of Side Bleed Air Units (NSN: 1660-01-687-9662)The contract obligates the supplier to manufacture or supply 89 Side Bleed Air units identified by NSN 1660-01-687-9662, ensuring full compliance with all applicable Department of Defense technical standards, military specifications, and quality requirements. These units are critical components for military aerospace systems and must meet stringent performance and durability benchmarks established by the Defense Logistics Agency. The work is to be performed at Tinker Air Force Base, Oklahoma, with the delivery schedule and acceptance criteria governed by contractual obligations tied to military readiness and operational deployment timelines. The solicitation is structured as a subcontract under NAICS code 336413, which classifies the industry as Aircraft and Parts Manufacturing. The proposal must be submitted no later than August 17, 2026, with the request for quotation posted on August 9, 2026, through the DIBBS platform. All bidders are expected to demonstrate proven capability in producing defense-grade components, adherence to quality control protocols, and the capacity to meet the delivery schedule without disruption. Non-compliance with any specified technical or procedural requirement may result in disqualification or contract termination.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Blanket Assembly ManufacturingThe contract requires full manufacturing or final assembly of the Blanket Assembly with NSN 1560012119542 in strict accordance with military specifications, encompassing the integration of all required components and adherence to defense-grade quality and cybersecurity standards. The work must be performed at the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and is classified as a subcontract under the NAICS code 336413, which corresponds to aircraft and parts manufacturing. The solicitation was posted on August 9, 2026, with a response deadline of August 17, 2026, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. Compliance with all applicable defense regulations and cybersecurity requirements is mandatory, and the contract is not subject to any specific set-aside provisions. All interested parties must submit proposals via the provided DIBBS portal before the stated deadline.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Aircraft Door Hinge Manufacturing and SupplyThe contract requires the manufacture and delivery of two aircraft door hinge units identified by NSN 1560-01-461-5036, fully compliant with applicable military specifications covering all phases of production, packaging, marking, and origin inspection. The work must adhere to stringent defense standards to ensure operational reliability and interoperability within military aircraft systems, with all components sourced and fabricated to meet exacting quality and traceability requirements. The place of performance is specified as New Cumberland, Pennsylvania, with the final deliverables intended for U.S. Department of Defense use. The contract is structured as a subcontract under the NAICS code 336413, which corresponds to aircraft and parts manufacturing, and was posted on August 9, 2026, with responses due by August 17, 2026. It is issued by the ASC SUPPLIER OPER AE AND AF DIV, a division within the Department of Defense, and is accessible via the DIBBS system under solicitation reference SPE4A726T634S. There is no set-aside classification indicated, and the contract does not specify a point of contact, implying that all communication and submission requirements must be handled through the official DIBBS platform.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Rod End Connector Supply (Aircraft/Defense Components)The contract seeks the procurement, packaging, labeling, and delivery of a rod end connector with NSN 1640016509141, specifically designed for aircraft and defense applications and required to meet all applicable military standards including MIL-STD-129 for packaging and labeling, as well as hazard communication protocols. This subcontract is part of a broader defense supply initiative managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, with performance required at the designated location in Corpus Christi, Texas, 78419-5255. All deliveries must comply with stringent defense specifications to ensure compatibility, safety, and traceability within military logistics systems. Responses to this solicitation are due by August 17, 2026, following a posted date of August 9, 2026, and the work falls under the NAICS code 336413 covering aircraft and parts manufacturing. The contract does not specify a set-aside designation and is intended for qualified subcontractors capable of full-cycle execution from manufacturing through final delivery with full documentation. Interested parties must access the official solicitation through the DIBBS portal to review all technical, compliance, and administrative requirements prior to submission.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
BLANKET ASSEMBLY
Solicitation # SPE4A7-26-T-634E
This contract is for the procurement of two units of a blanket assembly under solicitation SPE4A7-26-T-634E, with a delivery deadline of 89 days after order. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Cybersecurity requirements mandate CMMC Level 2 certification through a certified third-party assessment organization. The item is subject to stringent export control regulations under ITAR or EAR, prohibiting unauthorized disclosure of associated technical data to foreign persons anywhere, including foreign nationals in the U.S., and requires compliance with DFARS 252.225-7048. Access to controlled data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and the DLA questionnaire, and received formal approval from DLA. Inspection and acceptance occur at origin, and non-accepted supplies must have government identification removed. Packaging must conform to DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The place of performance is New Cumberland, Pennsylvania, and the primary point of contact is April Reed of the Department of Defense’s ASC Supplier Oper AE and AF Division.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
BRUSH SEAL, COVER
Solicitation # SPE4A7-26-T-634H
The contract is for 45 purchase groups of BRUSH SEAL, COVER, with each purchase group containing two units, totaling 90 individual items. The item is identified by NSN 1680-01-062-1740 and is subject to strict export control under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons—regardless of location—requires prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs handling of this controlled data, and distribution is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by DLA to access such information. The solicitation number is SPE4A7-26-T-634H, posted on August 9, 2026, with responses due by August 17, 2026. The contract falls under NAICS code 336413 and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required 89 days after award, with performance taking place at Robins Air Force Base, Georgia. Primary point of contact is April Reed, reachable via phone or email provided. The contractor must also maintain CMMC Level 2 certification as a C3PAO and comply with physical marking requirements for the item.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SHIPPING AND STORAG
Solicitation # SPE8ED-26-T-1256
The contract under solicitation SPE8ED-26-T-1256 provides for the procurement of 115 units of a shipping and storage container, identified by part number IM2720-00000 and NSN 8145-01-541-0043, at a unit price of $115.000 for a total contract value of $13,225.00. Delivery is required within 64 days of award, with FOB Origin terms, and all shipments must be delivered to the DDSP New Cumberland Facility in New Cumberland, Pennsylvania. Packaging and marking must comply with ASTM D3951, but are superseded by the DLA Master List of Technical and Quality Requirements, which take precedence. All packaging must be palletized per RP001 DLA Packaging Requirements for Procurement and labeled in strict accordance with MIL-STD-129, including use of 2D barcodes for tracking. The unit of issue and quantity per unit pack must match contract specifications, and government identification must be removed from non-accepted supplies. The item is subject to Covered Defense Information requirements, and compliance with safeguarding standards including NIST SP 800-171 and DFARS 252.204-7012 is mandatory. Hazardous materials, if applicable, must be labeled per 29 CFR 1910.1200 and accompanied by Safety Data Sheets prior to award, with immediate notification required for any changes in material composition. The solicitation is a total small business set-aside under NAICS code 336413, with proposals due by August 20, 2026, and must be submitted through the DLA Internet Bid Board System. Payment will be processed via Wide Area WorkFlow (WAWF), with invoices required to be submitted electronically. Clause 52.244-6 and 252.244-7999 govern subcontracting for commercial products and services, while clauses related to employment eligibility verification, combating human trafficking, and equal opportunity for workers with disabilities are incorporated by reference. The contracting officer’s representative and technical representative details are to be confirmed in the award, as are accounting and payment office information. The contract includes provisions on cybersecurity, information safeguarding, whistleblower rights, and limitations on the acquisition of covered defense telecommunications equipment. No
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
MMR R-T SLED, AIRCRA
Solicitation # SPE4A7-26-T-635Q
The contract solicitation SPE4A7-26-T-635Q seeks seven units of MMR R-T SLED, AIRCRAFT with NSN 1680-01-522-5949 for delivery to Ghatkopar West, Mumbai, India, under a 20-day ADO timeline with FOB Destination terms. The solicitation mandates strict compliance with military standards including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking and barcoding, and RP001 for DLA-specific palletization, with preservation method 10 (CLNG/DRY) and packaging code Q. Physical identification of bare items is required per RQ017, and all items must undergo inspection and acceptance at origin by the Government. Export control requirements under ITAR and EAR apply, restricting technical data disclosure to contractors with approved US/Canada Joint Certification Program status, completed DLA export training, and authorization; DFARS 252.225-7048 governs this restriction. The contractor must hold CMMC Level 2 certification and comply with safeguarding measures for covered defense information per DFARS 252.204-7012, including cyber incident reporting. Hazardous materials must be identified with current Safety Data Sheets per 29 CFR 1910.1200 and labeled accordingly. The contractor must be certified to ISO 9001:2015 and adhere to zero non-conformance sampling under MIL-STD-1916 or equivalent. The solicitation requires representation of small business status, HUBZone, WOSB, SDVOSB, or SDB certifications through SAM.gov, and disclosure of UEI and CAGE codes if offering covered defense telecommunications equipment. The contract type remains unspecified pending contracting officer determination but is evaluated on a Lowest Price Technically Acceptable basis with automated award potential. All submissions must be made electronically via the DLA-BSM Internet Bid Board System by August 17, 2026, with invoicing through Wide Area WorkFlow. Payment and oversight details will be finalized in the award document.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
WIPER PLATE ASSY
Solicitation # SPE4A7-26-T-633A
The contract pertains to the procurement of three Wiper Plate Assemblies identified by NSN 1680-01-562-1657 under solicitation SPE4A7-26-T-633A, with a delivery requirement of 103 days after award and FOB origin terms. The item is subject to stringent technical and quality requirements dictated by the DLA Master List of Technical and Quality Requirements, which must be adhered to at the time of solicitation issue or award, depending on acquisition size. Packaging must conform to MIL-STD-2073-1E with preservation Code 10 and no preservation materials, and marking shall follow MIL-STD-129 with physical identification as required by RQ017. The item is also governed by export control regulations under ITAR or EAR, necessitating compliance with DFARS 252.225-7048, where only contractors with approved U.S./Canada Joint Certification Program status, and who have completed required DLA training and questionnaires, may handle the controlled technical data. Inspection and acceptance occur at origin under FAR 52.246-2, requiring the contractor to maintain a quality system compliant with SAE AS9003 or ISO 9001 tailored to AS9003, with zero non-conformances mandated in sampling inspections. The contract incorporates multiple FAR and DFARS clauses including provisions for cybersecurity safeguarding (252.204-7012), prohibition of hexavalent chromium, prohibition of covered telecommunications equipment, whistleblower protections, and restrictions on mandatory arbitration agreements. Invoicing must be processed exclusively through WAWF, with payment handled via DoDAAC codes and no use of IPP or paper-based methods permitted. The solicitation exhibits characteristics of a Lowest Price Technically Acceptable procurement with pricing as the dominant factor evaluated, though no formal scoring weights are outlined; compliance with technical, regulatory, and delivery requirements is non-negotiable. The estimated contract value is $14,641.53 for the three units, with additional line items in the pricing table indicating broader procurement context, yet only these three units are obligated under this specific award. The contractor must ensure full compliance with environmental, safety, and export regulations, and all representations must be accurate in SAM, with UEI and CAGE codes properly registered. No first article testing is required, and additive manufacturing is prohibited unless
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → YOKOSUKA JAPAN CML PHN

Same awarding agency

NAICS: 488510
New
DIBBS
Domestic and International Shipping/Transportation Coordination
Freight Transportation Arrangement

POSTED

5 days ago

DEADLINE

in 8 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and CMMC Assessment Support
Computer Systems Design Services

POSTED

5 days ago

DEADLINE

in 8 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and Labeling
Other Scientific and Technical Consulting Services

POSTED

5 days ago

DEADLINE

in 8 days
View Details
NAICS: 384210
New
DIBBS
Specialized Packaging and Preservation Services

POSTED

5 days ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Electromechanical Actuator Manufacturing and Assembly
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

5 days ago

DEADLINE

in 8 days
View Details