Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

ADAPTER, CONNECTOR

Active
SPE7M1-26-U-4597Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of adapter connectors classified as commercial items, requiring strict compliance with Department of Defense technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements. The items must adhere to specific finish specifications per MIL-F-140272D, including a minimum nickel plating thickness of 0.0025 inches and a final silver plating of 0.0076 inches, with no lock wire holes permitted despite the drawing not showing them. Sampling inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and critical attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0. The item is designated as a critical application, requiring final inspection and acceptance at the manufacturer’s facility, with technical documentation made available to verify compliance—not merely count, kind, or condition inspections. Mercury and mercury-containing compounds are prohibited from direct contact with the hardware except for approved functional uses such as batteries, fluorescent lamps, sensors, or weapon systems, with portable devices containing mercury requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Class I ozone-depleting substances are strictly forbidden in manufacturing, cleaning, or testing processes, with any substitutions requiring explicit written approval from the contracting officer, though exemptions apply to commercial items as defined by FAR 11.001. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with no special markings required, and palletization must meet DLA packaging requirements. The contract specifies a delivery window of 164 days FOB origin with zero quantity variance, inspected and accepted at the destination, for a total of 2,510 units under purchase request 1000237944, with NSN 5935-00-701-2215. Multiple qualified suppliers are listed, including Raytheon, ITT Cannon, Lockheed Martin, and others, each providing the part under their respective part numbers. A mandatory Certificate of Quality Compliance is required, and technical data referenced in the solicitation must be fully met even if incomplete.

General Info

Procure 2,510 adapter connectors meeting DoD specs, zero defects, no mercury or ozone-depleters, FOB origin, 164-day delivery.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

334417 - Electronic Connector ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE7M1-26-U-4597.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Bryan Fair
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ADAPTER,CONNECTOR
ADAPTER, CONNECTOR
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THE DRAWING CALLS OUT FINISH PER MIL-F-140272D. ON PAGE 30<(>,<)> FINISH
NUMBER: M251, PLATE DESCRIPTION SILVER, INTERMEDIATE PLATES
(MINIMUMPLATING THICKNESS) NICKEL 0.0025 AND FINAL PLATE
SILVER 0.0076.
THE DRAWING DOES NOT SHOW LOCK WIRE HOLES, THEREFORE THERE SHOULD BE NO
LOCK WIRE HOLES IN THE PART.
EXCEPTION TO DRAWING 10689631, NOTE 3:
SPECIFICATION SHALL BE MIL-PRF-39012 IN LIEU OF MIL-S-3608 5
"FINAL INSPECTION AND ACCEPTANCE OF THE ITEM
SHALL BE AT THE ACTUAL MANUFACTURING FACILITY.
TECHNICAL INSPECTION IS REQUIRED. THE
CONTRACTOR SHALL MAKE DRAWINGS AND TECHNICAL
SPE7M1-26-U-4597
SECTION B
INFORMATION AVAILABLE TO VERIFY THAT THE ITEM
MEETS ALL TECHNICAL REQUIREMENTS.
COUNT, KIND, AND CONDITION INSPECTIONS ARE
NOT ACCEPTABLE. THIS NOTE TAKES PRECEDENCE OVER
MASTER SOLICITATION PART ONE PROVISIONS, NOTE 6,
QUOTATIONS BY NON-MANUFACTURERS (APR 1984,
DCSC 52.217-9C01). FINAL INSPECTION OF
PACKAGING, IF REQUIRED, MAY BE CONDUCTED
ELSEWHERE."
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
THE TECHNICAL DATA CITED IN THIS SOLICITATION IS
NOT COMPLETE, HOWEVER, THE ITEM PROVIDED MUST
MEET THE REQUIREMENTS OF THE CITED TECHNICAL
DATA IN ADDITION TO THE REQUIREMENTS OF THE
PART NUMBERED ITEM LISTED ON THIS SOLICITATION.
VENDOR ITEM CONTROL DRAWING (NEW CODE)
"CERTIFICATE OF QUALITY COMPLIANCE IS MANDATORY"
CRITICAL APPLICATION ITEM
LAX ELECTRONICS, INC. 94375 P/N TB1100(M3)
INFINITE ELECTRONICS INTERNATIONAL, 53919 P/N PE9088
ITT CANNON LLC 71468 P/N GRMI6051
RAYTHEON COMPANY 54X10 P/N G309471-1
RAYTHEON COMPANY 3B150 P/N G309471-1
DAL-TECH DEVICES, INC. 52335 P/N BF-TM
PEGASUS INC 53292 P/N 85-0696004
AMPHENOL CORPORATION 74868 P/N 79675
EDINBURGH CONNECTOR COMPANY, LLC 43608 P/N 70-100-1
ITT CANNON LLC 71468 P/N 6051
ROCKWELL COLLINS, INC. 95105 P/N 357-9758-000
LOCKHEED MARTIN CORPORATION 56232 P/N 336163
LOCKHEED MARTIN CORPORATION DBA 99696 P/N 3023279-011-103
ITT CANNON LLC 71468 P/N 150000-0011
SV MICROWAVE, INC. 95077 P/N 1002-0001
LINE ITEM 0000000001 TYPE OF COVERAGE: DLA DIRECT, CONUS
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7M1-26-U-4597
SECTION B
PR: 1000237944 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 1000237944 0001 EA 2,510.000
This is an estimated quantity and may not be purchased by the IDC.
NSN/MATERIAL:5935007012215
DELIVERY (IN DAYS):0164
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:EA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:BV OPI:O INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS

SPE7M1-26-U-4597 NSN/Part Number: 5935-00-701-2215 Quantity: 2,510 EA Purchase Request: 1000237944QTY: 2510 Delivery: 164 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECThis contract is for the procurement of an electrical plug connector identified by part number BACC45AD14A5P from Boeing and BP06CE-14-5P from Amphenol Corp, with the NSN 5935-00-687-0018. A total quantity of 39 units is specified, to be delivered FOB origin within 259 days with zero variance allowed in quantity. The item is classified as a commercial item, and all supplies must comply with DLA packaging requirements and technical quality standards referenced from the DLA Master List of Technical and Quality Requirements. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for specific functional components such as batteries, fluorescent lights, sensors, weapon systems, or chemically specified reagents; portable devices containing mercury must include shock-proof design and a secondary containment barrier as per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-129 labeling requirements and either FED-STD-313 for hazardous materials or ASTM D3951 for non-hazardous commercial packaging, with palletization following RP001 specifications. Inspection and acceptance occur at the destination, and the unit of issue is each (EA). The contract is issued under DLA Direct, CONUS coverage and identifies Bryan Fair from the Department of Defense as the primary point of contact.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, EThis contract covers the procurement of a qualified electrical connector receptacle under NSN 5935-01-169-0102, identified by part number M28804/3-9N and compliant with military specification MIL-DTL-28804E Revision E dated August 23, 2021, and TDP Revision A General 1. The item is classified as a critical application and must meet all Qualified Products List requirements outlined in procurement note H01 for Federal Stock Class 5935 connector assemblies and contacts. Packaging must adhere to DLA's mandatory standards, including MIL-STD-129 for marking and labeling, and RP001 for procurement packaging requirements, with non-hazardous items complying with ASTM D3951 unless superseded by higher-priority DLA technical and quality requirements. The item is to be delivered FOB origin in a quantity of 48 units with no variance permitted, and delivery is due within 95 days. Inspection and acceptance occur at the destination, and all packaging must be palletized as specified. The contract reference is SPE7M1-26-U-4565, issued by the Department of Defense’s Maritime Supply Chain, with a unit price of $48.00 per unit, totaling $2,304. The contract was posted on July 22, 2026, with responses due by August 6, 2026, and primary point of contact is Bryan Fair.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRIThis contract specifies the procurement of an electrical plug connector identified by part number 348-36E24-41S1 and NSN 5935-00-007-7363, with a quantity of 20 units to be delivered FOB origin within 210 days. The item is classified as a critical application item under DLA Direct, CONUS coverage, and is subject to strict compliance with DLA’s Master List of Technical and Quality Requirements, which governs all technical and quality specifications referenced by R or I numbers. The contract explicitly prohibits the intentional use of mercury or mercury-containing compounds in the product, its packaging, preservation, or marking, except for functional applications in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; such exceptions must include a secondary containment boundary compliant with NAVSEA 5100-003D. The use of Class I ozone-depleting substances in any phase of manufacturing or processing is strictly forbidden unless written approval from the contracting officer is secured, with exceptions applying only to commercial items as defined by FAR 11.001 or numbered part-only items. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking codes required and preservation methods specified to ensure environmental safety. All deliveries are subject to zero variance in quantity, inspected and accepted at the destination. The solicitation number is SPE7M1-26-U-4512, issued under a federal procurement process managed by the Department of Defense’s Maritime Supply Chain, with responses due by August 6, 2026, and primary point of contact being Bryan Fair at DLA.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLThe contract specifies the procurement of a electrical connector assembly, identified by part number MS90555C44412S and NSN 5935010935199, governed by technical standards MIL-DTL-22992H and MS90555G. It is classified as a qualified item requiring compliance with the Qualified Products List for Federal Stock Class 5935, and all components must adhere to strict packaging and marking requirements under MIL-STD-2073-1E and MIL-STD-129, including special labeling for removable crimp-type contacts that must be stored separately in noncorrosive rigid containers within the unit packaging. The item is designated as critical and subject to prohibitions on mercury compounds unless exempted for specific functional uses like batteries or sensors, and the use of ozone-depleting substances is strictly forbidden without written contracting officer approval. Packaging must include detailed marking of current and superseded part numbers for contacts per SAE-AS39029 and conform to special code ZZ for additional requirements. The quantity is fixed at 81 units with zero variance, delivered FOB origin within 106 days, inspected and accepted at destination under DLA Direct coverage. The contract references DLA’s Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date, and is issued under solicitation SPE7M1-26-U-4552 with a response deadline of August 6, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334417
New
DIBBS
BACKSHELL, ELECTRICAL CThe contract pertains to the procurement of a backshell for an electrical connector, identified by part number C8233-1-20 and NSN 5935-01-068-8956, with a quantity of ten units required. Delivery must be completed within twenty days from the contract award, with shipment terms FOB origin and no tolerance for quantity variance. The item must fully comply with referenced technical and quality standards, including MIL-STD-1916 or ASQ H1331 for sampling, where critical attributes require zero non-conformances and verification levels of VII, IV, and II. All packaging, marking, and shipping must conform to MIL-STD-2073-1E and MIL-STD-129, using approved packaging codes and palletization methods per DLA requirements. The use of ozone-depleting substances is strictly prohibited in any phase of manufacture or processing unless written approval is obtained from the contracting officer. Approved vendors include WilliamSRDM Inc., GleNAir Inc., and Joslyn Sunbank Company LLC, each with their respective part numbers. The end destination is specified as 1inci Hava Bakim Fabrika Mudurlugu in Eskişehir, Turkey, with A.J Worldwide Services designated as the freight forwarder. The item is subject to DLA's Master List of Technical and Quality Requirements, covered defense information protocols, and Federal Acquisition Regulation controls, with inspection and acceptance occurring at the origin. The solicitation number is SPE7M5-26-T-339E, with a response deadline of August 3, 2026, and the required delivery date is July 27, 2026.
ACTIVE DEVICES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
BACKSHELL, ELECTRICAThe contract specifies the procurement of two Backshell, Electrica adapter cable clamp units with part number 443HS001NF1507-3 and NSN 5935-01-444-4868, to be delivered within 20 days to the delivery address in Orangeburg, South Carolina. All items must be shipped FOB origin using the fastest traceable means, excluding parcel post, and must comply with DLA’s Packaging Requirements for Procurement (RP001) and MIL-STD-129 for marking and labeling. The material is not classified as hazardous under FED-STD-313, so commercial packaging per ASTM D3951 applies unless overridden by stricter DLA Master List of Technical and Quality Requirements referenced by R or I numbers, which take precedence. Each unit must be physically marked per RQ017, and any non-accepted supplies must have government identification removed per RQ011. The contract mandates zero variance in quantity, with inspection and acceptance occurring at the destination. The Unit of Issue is each (EA), with a total price of $2.00 per unit, and the delivery must be completed no later than July 20, 2026. Packaging must be palletized per RP001, with the bulk break point and freight shipping address both located at 1132 Cook Road, Orangeburg, SC 29118-8203. The contract number is SPE7M5-26-T-339W, solicited by the Department of Defense’s Active Devices Division, with Margaret Smith as the primary point of contact.
ACTIVE DEVICES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
ADAPTER, CONNECTORThis contract specifies the procurement of an adapter connector classified as a commercial item under Federal Acquisition Regulation definitions, subject to stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements. The item must comply with MIL-PRF-55339/13B and MIL-PRF-55339C specifications, with exact part number M55339/13-00492, and is identified as a qualified product on the Qualified Products List for connector assemblies and electrical contacts under procurement note H01. The connector is designated a critical application item requiring strict configuration control, and any deviation or waiver requires formal engineering change proposal and approval. The item must not contain mercury or mercury-containing compounds except in permitted functional applications such as batteries, fluorescent lamps, or sensors, with portable devices containing mercury needing shock-proof construction and secondary containment per NAVSEA 5100-003D. The use of Class I ozone-depleting substances is strictly prohibited in all manufacturing and processing phases unless written approval is obtained from the Contracting Officer. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must follow DLA packaging requirements. The contract is under a Total Small Business Set-Aside, with delivery due in 112 days FOB origin, inspecting and accepting at destination, and a fixed quantity of 1,908 units at a unit price of $1,908.00 with zero variance allowed. The National Stock Number is 5935-00-823-0308, and the solicitation number is SPE7M1-26-U-4574 with a response deadline of August 6, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLThe contract is for the procurement of 20 units of a connector receptacle with NSN 5935-01-573-1721 under solicitation SPE7M5-26-Q-0748, issued by the Department of Defense’s Active Devices Division. The item is subject to strict export control regulations under ITAR or EAR, prohibiting any disclosure or transfer of associated technical data to foreign persons anywhere in the world without prior authorization from the Department of State or Commerce. Access to this data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program (JCP) certification, have completed mandatory training on handling DOD export-controlled technical data, and have been formally approved by DLA. DFARS 252.225-7048 governs the handling and protection of this controlled information, applying equally to foreign nationals and foreign subsidiaries of U.S. companies. Delivery is required within 198 days of award, with performance to be conducted in Texarkana, Texas. The solicitation was posted on July 22, 2026, with responses due by August 5, 2026, and the NAICS code 334417 indicates classification under electronic component manufacturing. The primary point of contact is Andrew Bracken, reachable via email and phone for inquiries.
ACTIVE DEVICES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLThis contract specifies the procurement of a connector, receptacle with NSN 5935-00-823-0707 and part numbers 27025 from AMPHENOL CORPORATION and 59358230707 from NORTHROP GRUMMAN SYSTEMS CORPORATION, for a quantity of three units at a unit price of $3.00, totaling $9.00. The item must be delivered within 20 days to a FOB destination address in FPO AP 96657, with no variance allowed in quantity. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, respectively, and no special marking is required. The connector must not contain intentional additions of mercury or mercury-containing compounds, except where functionally necessary in specific applications such as batteries, fluorescent lights, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable devices containing mercury must be shock-proof and have a secondary containment boundary as per NAVSEA 5100-003D. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, applicable based on solicitation and award dates, and hazardous materials shipping must adhere to IP025 guidelines. Delivery is governed by DLA procedures C19 and C20, and the contract is tied to solicitation SPE7M5-26-T-339J, with a response deadline of August 3, 2026, and an original required delivery date of July 20, 2026. The contracting office is the Department of Defense's Active Devices Division, with procurement managed under NAICS code 334417 and point of contact Margaret Smith.
ACTIVE DEVICES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRIThis contract specifies the procurement of an electrical plug connector designated as MS3147E3-50S, meeting technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with compliance dictated by the revision in effect at the solicitation or award date depending on acquisition size. The item is classified as a qualified product under the Qualified Products List for Federal Stock Class 5935, and must be physically marked in accordance with critical application standards. It adheres to the SAE AS31471A and AN106001 thru AN106100 Rev 3 standards, and is subject to stringent packaging and labeling directives including MIL-STD-129 and RP001 DLA packaging requirements, with non-hazardous items packaged per ASTM D3951 unless overridden by higher-priority DLA specifications. The item is identified by NSN 5935-00-897-0435 with a fixed quantity of 228 units at a unit price of $0, for a total contract value not explicitly stated. Delivery is required within 72 days FOB origin with no tolerance for quantity variance, inspection and acceptance occurring at destination. Packaging must comply fully with DLA guidelines, including proper unit of issue and palletization per RP001, and hazardous materials must be handled per FED-STD-313 and TQ requirement IP025 if applicable. The procurement is under DLA Direct, CONUS coverage and is linked to solicitation SPE7M1-26-U-4576 with a response deadline of August 6, 2026, managed by the Department of Defense’s Maritime Supply Chain. The point of contact is Bryan Fair, and the item is classified under NAICS code 334417 for electrical component manufacturing. The quantity listed is an estimate and may not be fully procured by the Defense Logistics Agency.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334417
New
DIBBS
COVER, ELECTRICAL CONNEThe contract is for a pressure-proof electrical connector cover made from aluminum bronze per ASTM-B150 alloy 63200, identified by NSN 5935-00-070-9487 and part number M24231/13-011, with a requirement for 618 units under solicitation SPE7M1-26-U-4521. The item is designated as a critical application and must comply with MIL-DTL-24231/13E and its supplement, incorporating technical and quality requirements from the DLA Master List. All supplies must be free of intentional mercury or mercury-containing compounds except for specific exempted uses such as batteries, fluorescent lights, sensors, weapon systems, or chemical reagents specified by NAVSEA; portable devices containing mercury must include a secondary containment and meet Navy safety standards. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with strict prohibition of loose-fill cushioning materials per both MIL-STD-2073-1D and ASTM D3951. The product must be delivered FOB origin in 193 days with no quantity variance allowed, inspected and accepted at origin, and palletized according to DLA packaging requirements. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise defined, and critical attributes are held to the most stringent verification levels. Full and open competition applies, and all markings and documentation must comply with government standards without unauthorized deviations.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, E
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 334515
New
DIBBS
LEAD, TESTThe solicitation seeks two units of LEAD, TEST with NSN 6625-00-042-4430 under contract SPE7M1-26-T-221T, with a firm delivery deadline of 20 days after award. Full and open competition applies, and the procurement is governed by DLA packaging requirements and technical quality standards listed in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date or amendment date if modified. Cybersecurity compliance mandates CMMC Level 2 certification through a certified third-party assessment organization, and all contractors must adhere to DFARS 252.225-7048 for the handling of export-controlled technical data subject to ITAR or EAR regulations, which prohibits unauthorized disclosure to foreign persons regardless of location. Access to such data is restricted to contractors with approved US/Canada Joint Certification Program status who have completed mandatory DLA training and questionnaire. The item is to be delivered to Keyport, WA, with a response deadline of August 3, 2026, and the NAICS code 334515 applies. Primary point of contact is Michael Reese at the provided email and phone number.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
SOCKET, PLUG-IN ELECTROThis contract pertains to the procurement of 71 plug-in electronic sockets with the NSN 5935-00-148-3669 under solicitation SPE7M1-26-U-4524, issued as a total small business set-aside with a NAICS code of 334419. Delivery is required within 127 days of award, and all supplies must comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which govern packaging, inspection, and acceptance standards. Inspection and acceptance are to occur at the origin, with mandatory bare item marking and strict protocols for the removal of government identification from non-accepted items. The contract prohibits the intentional inclusion of mercury or mercury-containing compounds in the hardware, except for functional uses in batteries, fluorescent lamps, sensors, weapon systems, or specific chemical reagents authorized by NAVSEA; portable devices containing mercury must feature shock-proof construction and a secondary containment barrier per NAVSEA 5100-003D. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise directed, with verification levels assigned based on attribute criticality. The technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons, and is only accessible to contractors with approved JCP certification, completed DOD export control training, and explicit DLA authorization. Additionally, the contractor must be certified at CMMC Level 2 by an accredited third-party assessment organization and adhere to all applicable cybersecurity and defense information protection standards.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335312
New
DIBBS
SYNCHRO, TRANSMITTERThe contract pertains to the procurement of a Synchro Transmitter, identified by part numbers 867-015-001 from Parker-Hannifin Corporation and HGC-11-RE-6/F798 from Moog Inc., with a National Stock Number of 5990-01-384-9747. A total of 72 units are required under purchase request 1000237780, with a unit price of $72.00 and a total price of $5,184.00. Delivery is mandated within 126 days on a FOB Origin basis, with no tolerance for variance in quantity. Inspection and acceptance occur at the destination point, in compliance with DLA’s direct procurement procedures for CONUS. The item is classified as a Critical Application Item and must adhere to the full suite of technical and quality requirements listed in the DLA Master List, which overrides any other standards such as ASTM D3951. Packaging and labeling must conform to MIL-STD-129 and palletization must follow RP001: DLA Packaging Requirements for Procurement. Additionally, the vendor must maintain Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment compliance and remove government identification from non-accepted supplies. The solicitation number is SPE7M1-26-U-4634, with a response deadline of August 6, 2026, issued under the NAICS code 335312 by the Department of Defense’s Maritime Supply Chain office.
Motor and Generator Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333914
New
DIBBS
PUMP, RECIPROCATINGThe contract is for the procurement of two reciprocating pumps with NSN 4320-01-304-1371 and part number RPA308112C, issued under solicitation SPE7M1-26-T-221Q by the Department of Defense’s Maritime Supply Chain. Delivery is required within 20 days of contract award, with FOB destination terms and zero variance allowed in quantity. Inspection and acceptance occur at the destination, and all supplies must be packaged in strict compliance with ASTM D3951 and MIL-STD-129, with packaging and labeling controlled by DLA’s Master List of Technical and Quality Requirements, which supersede any conflicting standards. The Unit of Issue is each, and palletization must adhere to DLA’s RP001 packaging requirements. The items are to be delivered to USNS YUKON T-AO 202 at FPO AP 96686, with transportation details governed by DLAD PROC NOTE C19 and C20. The original required delivery date is July 20, 2026, and the contract includes specific government-only codes for logistics tracking and distribution. All technical and quality specifications referenced via R or I numbers are sourced from the DLA Master List, whose applicable revision is determined by the solicitation issue date or any amendment date.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETICThis contract specifies the procurement of an electromagnetic relay under solicitation SPE7M1-26-U-4567, with the NSN 5945-00-818-8904 and part number MS25267-A1, requiring 30 units to be delivered FOB origin within 247 days. The item must comply with technical specifications MIL-PRF-6106R(1) SUP 1A and MS25267J, and all applicable requirements from the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. Configuration change management, deviation requests, and qualified manufacturers lists are strictly controlled, and mercury or mercury-containing compounds are prohibited unless explicitly exempted for functional uses in batteries, instruments, or weapon systems, with additional containment requirements for portable devices. The use of Class I ozone-depleting substances is forbidden without written contracting officer approval, and this prohibition overrides any conflicting specification language. The contractor must ensure compliance with DLA packaging standards per MIL-STD-2073-1E, including prescribed methods for preservation, wrapping, and unit container marking, and all packaging must adhere to MIL-STD-129 with the special marking code ZZ. Each individual unit must be labeled according to IPC/JEDEC J-STD-609 to identify lead content, with markings placed as specified in the standard. Delivery is subject to zero variance in quantity, inspection and acceptance occur at the destination, and the item is classified as a critical application. Full and open competition is required, and the contract applies to government-furnished hardware with no commercial item exceptions. The point of contact is Bryan Fair at DLA, and all information must be interpreted within the context of the DLA acquisition framework.
Relay and Industrial Control Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334418
New
DIBBS
SOLENOID, ELECTRICALThe contract pertains to the procurement of a solenoid, electrical component with NSN 5945-00-463-9280 and part number 965830, sourced from approved vendors including RP001 compliant suppliers such as ROCKER SOLENOID CO, G.W. LISK CO, INC, and PARKER HANNIFIN CORPORATION. The item is classified as a critical application item under a total small business set-aside, with a requirement for 47 units delivered within 198 days FOB origin, with no tolerance for quantity variance. The contract mandates strict adherence to DLA packaging standards per MIL-STD-2073-1E, including specific preservation methods, materials, and unit packaging code U, with all marking requirements following MIL-STD-129 and the special code ZZ for lead finish identification as defined by IPC/JEDEC J-STD-609. Each individual unit must be labeled in accordance with this standard to denote lead content and other attributes, with placement strictly regulated. Inspection and acceptance occur at the destination point, and the contract is issued under DLA direct, CONUS coverage using the DoD unit of issue system. The solenoid is subject to the overarching technical and quality requirements outlined in the DLA Master List, with compliance governed by the revision in effect at the solicitation or award date depending on acquisition size. The solicitation number is SPE7M1-26-U-4525, with a response deadline of August 6, 2026, and the primary point of contact is Bryan Fair of the Department of Defense’s Maritime Supply Chain.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333996
New
DIBBS
IMPELLERThe contract specifies the procurement of two impellers with a diameter of 7.187 inches, identified by NSN 4320012660717 and purchase request 7017574014, under solicitation SPE7M1-26-T-221U. Delivery is required within 20 days of contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. The impellers must conform to all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951, and all packaging must comply with MIL-STD-129 for marking and labeling. Unit packaging must adhere to the specified Quantity per Unit Pack (QUP) of 001, and palletization must follow DLA Packaging Requirements. The impellers are to be shipped via traceable freight to the designated Virginia Beach shipping address, and parcel post is explicitly prohibited. The contract lists two qualified suppliers—All-Safe Inc and Pentair Federal Pump, LLC—as authorized sources for the part number 443-1768-208, and the unit price is set at $2.00 per unit for a total price of $4.00. The government’s required delivery date is July 20, 2026, with the solicitation issued on July 22, 2026, and responses due by August 3, 2026. The contracting office is the Maritime Supply Chain under the Department of Defense, with Michael Reese as the primary point of contact.
Fluid Power Pump and Motor Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
FILTER, RADIO FREQUENCYThe contract pertains to the procurement of 22 units of a Radio Frequency Interference Filter with NSN 5915-01-260-4112 under solicitation SPE7M1-26-U-4586, issued by the Department of Defense's Maritime Supply Chain through the Defense Logistics Agency. Delivery is required within 106 days after award, with responses due by August 6, 2026. The item is subject to stringent cybersecurity requirements, including compliance with CMMC Level 2 as a Certified Third-Party Assessment Organization, and adherence to DLA’s technical and quality specifications referenced in their Master List. Technical data associated with the filter is classified as export-controlled under either ITAR or EAR, restricting dissemination to foreign persons regardless of location and mandating prior authorization from the Department of State or Commerce. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export training, and DLA authorization may access this data. Additionally, the contractor must comply with DLA packaging standards, remove government identification from non-accepted supplies, and handle Covered Defense Information in accordance with applicable regulations. The procurement is managed by Point of Contact Bryan Fair, with all details accessible via the DIBBS website.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334413
New
DIBBS
HEATER, THERMAL RELEASEThe contract pertains to the procurement of 55 units of a Thermal Release Heater identified by NSN 5999-00-504-9889, with a delivery schedule of 350 days from award. All supplies must comply with DLA packaging requirements and incorporate technical and quality specifications referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. Configuration control requires formal engineering change proposals and procedures for requesting deviations or waivers. Items must be physically marked according to established identification standards, and any non-accepted supplies must have government identification removed prior to return. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. No intentional addition of mercury or mercury-containing compounds is permitted in any supplied hardware or materials, except for functional uses in batteries, fluorescent lamps, required instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents; portable fluorescent lamps and instruments containing mercury must be shock-proof and include a secondary containment boundary per NAVSEA 5100-003D. No existing data package is available, and the alternate offeror must submit a complete data package including technical details for both the approved and alternate parts. The solicitation was issued under SPE7M1-26-U-4564 with a response deadline of August 6, 2026, and is managed by the Department of Defense’s Maritime Supply Chain through primary point of contact Bryan Fair.
Semiconductor and Related Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLYThe contract is for the procurement of one power supply with NSN/Part Number 6120-01-592-7992, issued under solicitation SPE7M1-26-T-222A by the Department of Defense through the Maritime Supply Chain. The offeror must comply with all DLA packaging requirements and technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. The item must be delivered within 20 days after delivery order issuance to Fort Bliss, Texas, with a response deadline of August 3, 2026. The offeror is also required to submit a complete data package including specifications for both the approved and alternate parts. The primary point of contact for inquiries is Michael Reese, reachable via email or phone, and the solicitation is unreserved with no set-aside designations, classified under NAICS code 335999 for other electrical equipment and component manufacturing.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
DIBBS
COIL, ELECTRICALThe contract pertains to the procurement of an electrical coil with NSN 5950-01-106-6783 and part number 213322-1178, supplied by Marotta Controls Inc, under solicitation SPE7M1-26-U-4616. Six units are required at a unit price of $6.00, totaling $36.00, with delivery mandated within 164 days FOB origin and no variance allowed in quantity. Inspection and acceptance occur at destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with special handling instructions indicating the item is delicate, featuring fragile terminals that must remain protected. The packaging code is U, utilizing preservative method 41, and requires marking with the special code 06 for delicate instrument and arrow up. Mercury and mercury-containing compounds are strictly prohibited unless part of functional components like batteries, fluorescent lights, or specific instruments as authorized by NAVSEA, and any portable mercury-containing devices must include a secondary containment barrier per NAVSEA 5100-003D. All packaging, marking, and shipping must adhere to DLA’s RP001 and IP025 requirements for hazardous materials. The contract falls under DLA Direct, CONUS coverage and uses the DoD-authorized unit of issue. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, with the applicable revision controlled by the acquisition type and relevant dates. Purchasing is estimated and subject to IDC confirmation.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334413
New
DIBBS
DISPLAY, OPTOELECTRONICThe contract pertains to the procurement of 17 units of a display, optoelectronic item identified by NSN 5980-01-247-1862, with a delivery requirement of 120 days after order. The solicitation, numbered SPE7M1-26-U-4627, is issued under a Women-Owned Small Business Set-Aside and falls under NAICS code 334413. All supplied items must strictly conform to the source-controlled drawing referenced in the contract, and only the sources listed on that drawing are currently approved for this procurement, though additional qualified sources not yet reflected on the drawing may be considered in the future. Offerors seeking to qualify their products for future acquisitions must contact the cognizant design activity specified on the drawing. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date, depending on the acquisition size. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise stated; attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively, with unspecified attributes treated as major. Packaging must comply with DLA packaging requirements, and government identification must be removed from any non-accepted supplies. The point of contact for this solicitation is Bryan Fair at the Department of Defense’s Maritime Supply Chain.
Semiconductor and Related Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details