This Solicitation opportunity from Department Of Defense was posted on June 24, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

ADAPTER, ELECTRICAL

Closed

SPE4A7-26-T-471DFederal

Submission Closed06/29/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 327110

New

DIBBS

CHASSIS, ELECTRICAL-ELEThis contract pertains to the procurement of a chassis for electrical-electronic equipment, identified by NSN 5975-01-690-7483 and part number CAS000555, with a quantity of nine units. All items must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and the applicable revision is determined by the solicitation or award date depending on the acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively. The item is designated as a critical application item, and the manufacturer is Elma Electronic Incorporated. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization must follow DLA packaging standards. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware except in specific exempted cases such as batteries, fluorescent lamps, sensors, or instruments as defined by NAVSEA, and any portable devices containing mercury must be shockproof with a secondary containment. Preservation and packing methods must exclude mercury entirely. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the required delivery window is 171 days from contract award, with a need ship date of January 10, 2027, and an original required delivery date of March 14, 2027. The delivery destination is the DLA Distribution San Joaquin warehouse in Tracy, California. The contract is under solicitation SPE4A7-26-T-570W, with a response deadline of July 22, 2026, and the North American Industry Classification System code is 327110.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

PLATE, WALL, ELECTRICThe contract specifies the procurement of two units of a wall electric plate with NSN 5975-01-721-6814 and part number 3351356-1 under solicitation SPE4A5-26-T-283U, with a delivery requirement of 183 days FOB origin and zero tolerance for quantity variance. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements, with hazardous materials adhering to FED-STD-313 and IP025, while non-hazardous items must follow commercial packaging standards. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Configuration changes require formal engineering change proposals and variance requests, and all documentation must align with sourcing approval and identification protocols including bare item marking and removal of government identifiers from non-accepted supplies. The item is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 17, 2027, and inspection and acceptance occur at destination. The contract incorporates defense information handling protocols and references specific DLA procedural notes for transportation logistics.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

De-centralized Manufacturing of Low-Cost, Sustainable Cementitious BindersThe agreement aims to advance a decentralized manufacturing system for sustainable, low-carbon cementitious binders that can replace up to 90 percent of traditional Portland cement in ready-mix concrete production. This initiative leverages industrial waste and natural pozzolans combined with C-Crete’s proprietary binder to drastically reduce the carbon footprint of concrete manufacturing while maintaining structural performance. The pilot facility will be located in San Leandro, California, serving as a proof-of-concept for widespread adoption by cement and concrete suppliers across the state, with the goal of enabling a scalable, economically viable alternative to conventional cement. The project operates under the State of California Energy Commission, with primary oversight managed by Neeva Benipal as Commission Agreement Manager and Rouzbeh Savary from C-Crete serving as Project Manager. The initiative aligns with California’s environmental objectives and is exempt from CEQA review based on staff recommendations. The pilot will test the technical and operational feasibility of decentralized production, empowering local ready-mix operations to produce binder materials on-site or regionally, reducing transportation emissions and supply chain dependencies. The timeline is set for the project to be pursued starting July 7, 2026, and the effort is intended to catalyze broader industry transition toward low-emission construction materials.

POSTED

DEADLINE

Ceramic Nest Module Supply and InstallationThe contract entails the supply and installation of 75 new ceramic nest modules and the retrofitting of 45 existing seabird nests with elevated sunshields to enhance durability and climate resilience on Año Nuevo Island. These nesting structures are specifically designed to protect seabird populations from rising temperatures and environmental stressors by providing stable, long-lasting nesting habitats. The ceramic materials ensure resistance to erosion, salt exposure, and extreme weather conditions typical of the coastal environment. All work must be completed in accordance with ecological guidelines to minimize disruption to nesting species and their natural behaviors. The project is classified under NAICS code 327110, indicating it involves the manufacturing of ceramic products, and is structured as a subcontract under the California Department of Parks and Recreation. The performance location is designated with zip code 94060, corresponding to Año Nuevo Island, where all installations must occur. The solicitation was posted on July 6, 2026, and the effort is part of a broader initiative to conserve and restore critical seabird breeding habitats under the state’s conservation and climate adaptation mandates. All materials and installation methods must meet specified environmental and durability standards to ensure the long-term success of the nesting program.

California Parks and Recreation, Department of

POSTED

DEADLINE

Supply of Elongated Toilet Bowls (White, RH)The contract requires the supply of elongated, right-hand flush toilet bowls in white, specifically matching models such as the Cadet PRO 3517A101.020 or an approved equal, for installation in resident bathrooms. The items must meet specified quality and functional standards to ensure compatibility and durability in institutional or residential healthcare settings. The solicitation is classified as a subcontract under NAICS code 327110, which pertains to ceramic plumbing fixture manufacturing, indicating that suppliers must have the capability to produce or source compliant fixtures that align with industry benchmarks. The contract was posted on June 29, 2026, with a response deadline of July 16, 2026, at 4:30 PM, giving potential vendors approximately three weeks to submit proposals. The contracting entity is the Health and Human Services Commission in Texas, though specific location or office details are not provided. The procurement is accessible through the TX SmartBuy portal, and while no set-aside provisions or point of contact information is listed, interested parties must ensure strict adherence to the technical requirements and submission timelines to qualify for award consideration.

Health and Human Services Commission

POSTED

15 days ago

DEADLINE

in 1 day

General Info

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

327110 - Pottery, Ceramics, and Plumbing Fixture ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-471D.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedJun 24

Solicitation

Response DeadlineJun 29

Deadline has passed

Submission Closed

06/29/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressUS

Contacts

MICHAEL JOHNSON

contact@example.gov

+1 (555) 000-0000

Full Description

ADAPTER,ELECTRICAL
ADAPTER,ELECTRICAL
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
CRITICAL APPLICATION ITEM
ARROWHEAD PRODUCTS CORP 70628 P/N 713301-3
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A7-26-T-471D
SECTION B
PR: 7017038568 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017038568 0001 EA 6.000
NSN/MATERIAL:5975016998840
DELIVERY (IN DAYS):0250
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/23/2027 Original Required Delivery Date:02/23/2027
SPE4A7-26-T-471D
SECTION B
PR: 7017038568 PRLI: 0001 CONT’D
SPE4A7-26-T-471D NSN/Part Number: 5975-01-699-8840 Quantity: 6 EA Purchase Request: 7017038568QTY: 6 Delivery: 250 days ADO