This Solicitation opportunity from Department Of Defense was posted on May 29, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
ADAPTER KIT, MAIN RO
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract pertains to the procurement of an Adapter Kit, Main Rotor with NSN 4920-00-755-6686 and part number 7HEL354, manufactured by Marvel Manufacturing Co, under solicitation SPE4A6-26-T-67Q7. The requirement calls for a single unit of measure of 1 kiloterm, to be delivered within 20 days from the award date, FOB origin, to Fort Hood, Texas. Delivery must be made via traceable means, with parcel post strictly prohibited, and shipping is directed to a designated LRC-A facility. Inspection and acceptance occur at the destination point, and sampling for quality assurance must follow MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are considered major. All packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA Packaging Requirements for Procurement, and the Unit of Issue and Quantity per Unit Pack are set at KT and 001. The contract includes comprehensive cybersecurity mandates, requiring CMMC Level 2 Self-Assessment and compliance with FAR 252.204-7012 for safeguarding covered defense information, alongside prohibitions on covered defense telecommunications equipment under FAR 252.204-7018. Item Unique Identification is not required, though DFARS 252.211-7003(c)(1)(i) remains applicable. Physical marking of bare items is required per RQ017, and government identification must be removed from non-accepted supplies per RQ011. Technical and quality specifications are drawn from the DLA Master List of Technical and Quality Requirements, which supersedes all other standards. The solicitation is a small business set-aside under NAICS code 336413, with domestic sourcing mandated under the Berry Amendment and Buy American Act, and contractors must be registered in SAM. Payment is processed via WAWF, with receiving reports required to meet DFARS Appendix F standards. Offerors must maintain current representations in SAM, disclose size and socioeconomic status, and comply with clauses
General Info
Agency
NAICS
Place of Performance
BLDG 6940 E MURPHY ROAD, FORT HOOD, TX, 76544, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
ADAPTER KIT,MAIN ROTOR
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
SAMPLING:
SPE4A6-26-T-67Q7
SECTION B
MARVEL MANUFACTURING CO 87065 P/N 7HEL354
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016695150 0001 KT 1.000
NSN/MATERIAL:4920007556686
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W45QRE
W6YR USALRCTR FT HOOD
BUILDING 89013 QUARTERMASTER LANE
FORT HOOD TX 76544
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W56W9V
W0H9 LRC-A FT HOOD
LRC A FORT HOOD AMCOM
BLDG 6940 E MURPHY ROAD
FORT HOOD TX 76544
US
MARKFOR
W56W9V
SPE4A6-26-T-67Q7
SECTION B
PR: 7016695150 PRLI: 0001 CONT’D
W0H9 LRC-A FT HOOD
LRC A FORT HOOD AMCOM
BLDG 6940 E MURPHY ROAD
FORT HOOD TX 76544
US
M/F: (TCN) W56W9V61210002
RDD:
PROJ: TP 3
SUPP ADD: W45NQ7 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A3A DIST: ADV: FC: 61
Need Ship Date:00/00/0000 Original Required Delivery Date:05/06/2026
SPE4A6-26-T-67Q7 NSN/Part Number: 4920-00-755-6686 Quantity: 1 KT Purchase Request: 7016695150QTY: 1 Delivery: 20 days ADO
More opportunities from Department Of Defense → ASC COMMODITIES DIVISION
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS