Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

ADAPTER, STRAIGHT, TUBE

Active
SPE7M0-26-T-030RFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a straight tube-to-boss adapter with part number 4730-01-618-1180 and NSN 4730016181180, requiring five units to be delivered within five days under solicitation SPE7M0-26-T-030R. The item must conform to SAE J514-2 Revision NR dated 04/01/2024 and all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be approved unless explicitly authorized by the specification. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA Packaging Requirements, and all units must be labeled with the correct unit of issue and quantity per unit pack. The item is to be shipped FOB origin via the fastest traceable means, excluding parcel post, to the designated delivery point at Anniston Army Depot, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and the required delivery date is August 4, 2026. The contract is open for full and open competition under a federal solicitation managed by the Department of Defense’s Maritime Supply Chain ESOC Buys, with the purchase request number 7017722187 and a unit price of $5.00 per unit.

General Info

Five straight tube-to-boss adapters delivered by Aug 4, 2026, FOB origin, conforming to SAE J514-2 and DLA requirements.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

332919 - Other Metal Valve and Pipe Fitting ManufacturingView NAICS

Place of Performance

7 FRANKFORD AVE, ANNISTON, AL, 36201-5021, US

Set-Aside

NONE

Documents

(1)

SPE7M0-26-T-030R.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
ContactsNo contacts available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
ContactsNo contact information available

Full Description

Show more
ADAPTER,STRAIGHT,TUBE TO BOSS
ADAPTER,STRAIGHT,PI
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
FULL AND OPEN COMPETITION APPLY
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
TDP Rev A Gen 1 IAW BASIC NON GOVT STD SAE J514-2 REVISION NR DTD 04/01/2024 PART PIECE NUMBER: 4-4 080 120S
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017722187 0001 EA 5.000
NSN/MATERIAL:4730016181180
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
SPE7M0-26-T-030R
SECTION B
PR: 7017722187 PRLI: 0001 CONT’D
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W31G1Y
W0LX ANNISTON DEPOT PROP DIV
ANNISTON ARMY DEPOT BLDG 361
7 FRANKFORD AVE
ANNISTON AL 36201-5021
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W31G1Y
W0LX ANNISTON DEPOT PROP DIV
ANNISTON ARMY DEPOT BLDG 361
7 FRANKFORD AVE
ANNISTON AL 36201-5021
US
MARKFOR
W31G1Y
W0LX ANNISTON DEPOT PROP DIV
ANNISTON ARMY DEPOT BLDG 361
7 FRANKFORD AVE
ANNISTON AL 36201-5021
US
M/F: (TCN) W31G1Y6211013P
RDD: 211
PROJ: TP 1
SUPP ADD: W31G1Y SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: ADV: 2L FC: VE
Need Ship Date:00/00/0000 Original Required Delivery Date:08/04/2026
SPE7M0-26-T-030R NSN/Part Number: 4730-01-618-1180 Quantity: 5 EA Purchase Request: 7017722187QTY: 5 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332919
New
DIBBS
TEE, PIPE
Solicitation # SPE7M2-26-Q-0717
This contract specifies the procurement of a copper alloy socket type tee fitting with a nominal pipe size of 1 inch, manufactured via a metal casting process requiring specialized tooling. The item is identified by NSN 4730-00-542-5250 with a quantity of 385 units, and delivery is required within 100 days of award. All technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The contract mandates strict adherence to DLA packaging standards, configuration change management through engineering change proposals, and the removal of government identification from non-accepted supplies. Mercury or mercury-containing compounds are prohibited from intentional addition or direct contact with the product except for specific functional uses such as batteries, fluorescent lights, sensors, controls, weapon systems, or NAVSEA-specified reagents; portable mercury-containing devices must be shock-proof with a secondary containment barrier per NAVSEA 5100-003D. The supplier is required to furnish one Certificate of Quality Compliance (COQC) for each manufacturing lot, prepared in accordance with the Supplemental Quality Assurance Provision, and make it available for Government review at the point of inspection if applicable. An electronic copy of each COQC must be uploaded as an attachment to the Receiving Report in the iRAPT system for Government records. The COQC documentation is considered part of the item’s price, and compliance is mandatory for acceptance. The solicitation is a total small business set-aside under FAR 19.5 with a response deadline of August 11, 2026, and the point of contact for inquiries is Alla Yakover. The place of performance is New Cumberland, PA, and the contracting activity falls under the Department of Defense’s Nuclear Reactor Program.
NUCLEAR REACTOR PROGRAM

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332919
New
DIBBS
COUPLING HALF, QUICK
Solicitation # SPE7M3-26-T-7831
The contract pertains to the procurement of 29 units of a Coupling Half, Quick Disconnect with NSN 4730-01-603-5705 and part number 60CHD2-33446, issued under solicitation SPE7M3-26-T-7831 by the Department of Defense’s Fluid Handling Division. The item is to be delivered FOB origin within 167 days of the contract award, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging must comply strictly with ASTM D3951 and MIL-STD-129, while adhering to DLA Packaging Requirements as outlined in RP001. The DLA Master List of Technical and Quality Requirements supersedes any conflicting standards. Each unit must be labeled and packed in accordance with specified government protocols, with the Unit of Issue being each (EA) at a unit price of $29.00, totaling $841.00. Delivery is directed to the DLA Distribution facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002, with an original required delivery date of October 14, 2026, and a need ship date of February 1, 2027. Transportation procedures follow DLAD Proc Notes C19 and C20, and all items must be palletized as mandated. The contract enforces the removal of government identification from non-accepted supplies and references applicable technical and quality specifications listed in the DLA Master List, with revisions controlled by either the solicitation issue date or award date depending on acquisition size.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332919
New
DIBBS
NUT ASSEMBLY, TUBE COUP
Solicitation # SPE4A6-26-T-11XP
The contract pertains to the procurement of 11 units of a nut assembly for tube coupling, identified by NSN 4730-01-478-8450 and part number BACN10ZA1ZW, under solicitation SPE4A6-26-T-11XP. Delivery is required within 171 days of contract award, with FOB origin terms and inspection and acceptance occurring at the destination. The unit of issue is each, with zero variance permitted in quantity. All items must be packaged in accordance with ASTM D3951 and labeled per MIL-STD-129, with palletization strictly following DLA Packaging Requirements for Procurement. The DLA Master List of Technical and Quality Requirements governs all technical specifications, overriding any conflicting standards, and includes mandatory adherence to tailored quality requirements, source approval documentation, and removal of government identification from non-accepted supplies. Item Unique Identification is not required per customer request. Sampling must comply with MIL-STD-1916 or ASQ H1331 using zero non-conformances unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Measuring and test equipment must meet RT001 standards. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and all transportation logistics must follow DLAD Proc Notes C19 and C20. The original required delivery date is October 20, 2027, with a need ship date of January 31, 2027. The contract falls under NAICS code 332919 and is administered by the Department of Defense’s ASC Commodities Division, with primary point of contact John Schaefer.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332919
New
DIBBS
VALVE, CHECK
Solicitation # SPE7MC-26-T-167E
The contract specifies the procurement of a check valve with NSN 4820-01-618-6235 and part number PLC-13514-1, quantity of one unit, to be delivered within 20 days FOB origin under solicitation SPE7MC-26-T-167E. The item is destined for USS HYMAN G RICKOVER (SSN 795) in Groton, Connecticut, with strict delivery instructions requiring the use of traceable freight methods and prohibiting parcel post. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must meet DLA’s packaging requirements. The vendor must adhere to DLA’s Master List of Technical and Quality Requirements referenced by R and I numbers, and mercury or mercury-containing compounds are strictly prohibited unless explicitly exempted for functional components such as batteries, instruments, or weapon systems, with additional containment rules for portable devices. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and all supplies must be furnished without intentional introduction of mercury. The inspection and acceptance points are at destination, with zero tolerance for quantity variance. The delivery deadline is July 23, 2026, and the point of contact is Paula Mcclary at DLA, with further information available via the DIBBS portal.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332919
New
DIBBS
COUPLING HALF, QUICK
Solicitation # SPE7M0-26-T-029A
The item is a coupling half, quick, designated by NSN 4730-01-539-7146, with a quantity of one unit, under purchase request 7017727300, and requires delivery within five days ADO. This item is subject to strict export controls under either ITAR or EAR, meaning any transfer of associated technical data to foreign persons, regardless of location, including foreign nationals employed by U.S. companies or subsidiaries, requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and distribution is limited to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on proper handling of DOD export-controlled technical data, and have successfully submitted the DLA Export-Controlled Technical Data Questionnaire. The solicitation, issued under number SPE7M0-26-T-029A by the Department of Defense’s Maritime Supply Chain ESOC Buys organization, was posted on August 4, 2026, with responses due by August 17, 2026. The NAICS code 332919 classifies this as a miscellaneous fabrication activity, and performance is expected within the United States under federal procurement guidelines.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332919
New
DIBBS
REPAIR KIT, VALVE
Solicitation # SPE7M1-26-T-248T
The contract is for a repair kit for a valve with NSN 4820-01-622-4438 and part number 0888830, supplied by Watts Regulator Co, under solicitation SPE7M1-26-T-248T. Two kits are required to be delivered within five days to a military destination in APO AE 09865-0061, with delivery terms FOB destination and zero tolerance for quantity variance. The items must be packaged and preserved in strict compliance with MIL-STD-2073-1E Appendix D for kits and marked in accordance with MIL-STD-129, with palletization following DLA packaging requirements. The repair kit must not contain any intentionally added mercury or mercury compounds except in specific exempted devices such as functional batteries or weapon systems, and portable fluorescent lamps or instruments containing mercury must have shock-proof housing and a secondary containment boundary as per NAVSEA 5100-003D. The use of Class I ozone-depleting substances in any phase of manufacture or processing is prohibited unless written approval is obtained from the contracting officer, and this restriction overrides all other specifications without diminishing product performance standards. Packaging data includes specific preservation methods and materials designated as ZZ, and the unit of issue is KT. Delivery is scheduled for August 3, 2026, with no flexibility on the required date. All technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on acquisition size. The contract is managed under the Department of Defense’s Maritime Supply Chain, and point of contact is Misty Eckard.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332919
New
DIBBS
MONITOR, MANUAL FLOW
Solicitation # SPE7M3-26-T-7826
The contract pertains to the procurement of one unit of a MONITOR, MANUAL FLOW WATER CANNON with NSN 4730-01-591-7199, sourced from STANG INDUSTRIES, INC under part number 925250-51, featuring 304 stainless and aluminum bronze swivels of 2.5 inch nominal size. The item must be delivered within 20 days FOB origin with no quantity variance permitted, inspected and accepted at the destination. Packaging must comply with ASTM D3951 as supplemented by all applicable DLA Master List of Technical and Quality Requirements, which override any conflicting standards, and all packaging and labeling must adhere to MIL-STD-129. Palletization is required per DLA Packaging Requirements for Procurement, and government identification must be removed from non-accepted supplies. The sole delivery point is the W90RFA facility in Binghamton, NY, with shipment required via the fastest traceable method—parcel post is prohibited. The unit of issue is each (EA), with a total price based on a unit price of $1.00, referenced under purchase request 7017722299. The contract is issued under solicitation SPE7M3-26-T-7826 with an original required delivery date of July 30, 2026, and the point of contact is William Cain of the DLA Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332919
New
DIBBS
CAP, VALVE
Solicitation # SPE7M4-26-T-299S
The contract pertains to the procurement of a CAP, VALVE with NSN 4810-01-609-6231 and part number 222104 from EATON CORPORATION, with a quantity of 2 units to be delivered within 20 days of contract award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over any referenced standards, including ASTM D3951 and MIL-STD-129 for packaging and labeling. Sampling and inspection follow MIL-STD-1916 or a comparable zero-based plan, with critical attributes requiring zero non-conformances in the sample lot. The product is classified as a critical application item, and any deviations require formal engineering change proposals or variance requests. Packaging must adhere to DLA-specific guidelines, including palletization per RP001 and labeling per MIL-STD-129, with no tolerance for quantity variance. Delivery is FOB origin to the destination address in Jacksonville, Florida, with inspection and acceptance also at destination. Shipping must occur via traceable freight methods, explicitly prohibiting parcel post. The contract is issued under solicitation SPE7M4-26-T-299S with a required delivery date of July 31, 2026, and is managed by the Department of Defense’s Fluid Handling Division, with point of contact Rory O’Reilly.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332919
New
DIBBS
COVER PLATE, VALVE
Solicitation # SPE7M1-26-T-249K
The contract is for one cover plate, valve with NSN 4810-01-621-3856, under solicitation SPE7M1-26-T-249K, issued by the Department of Defense through the Maritime Supply Chain. The item must be delivered within five days of contract award, FOB origin, with no tolerance for variance in quantity. Inspection and acceptance occur at the destination, specifically at Puget Sound Naval Shipyard IMF in Bremerton, WA, with special shipment routing instructions referenced in DLAD Proc Notes C19 and C20. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, using unit container E5, no special marking, and palletization per DLA packaging standards. The supplier, SAUER COMPRESSORS USA, INC., must ensure no intentional addition of mercury or mercury compounds, except for specified exempted uses such as functional components in batteries, instruments, or chemical reagents approved by NAVSEA, and any portable mercury-containing devices must have shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. The required delivery date is July 29, 2026, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. The point of contact for the contract is Misty Eckard, and the item is classified under NAICS code 332919.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332919
New
DIBBS
ADAPTER, STRAIGHT, PI
Solicitation # SPE7M0-26-T-028U
The contract specifies the procurement of one straight pipe-to-hose adapter with NSN 4730-01-604-8677 and part number 885517A05, manufactured by Brunswick Corp, under solicitation SPE7M0-26-T-028U. Delivery is required within five days of award, with FOB destination terms, zero tolerance for quantity variance, and inspection and acceptance occurring at the delivery point. All items must comply with DLA’s Master List of Technical and Quality Requirements, which supersedes any conflicting standards such as ASTM D3951, and packaging must adhere to MIL-STD-129 labeling and RP001 packaging guidelines. The unit of issue is each, and packaging must follow the specified QUP of 010. The item is destined for FPO AE 09645-0010, with vessel shipment coordinated per DLAD PROC NOTE C19 and C20, and the freight shipping address is at NAVSTA Rota, Spain. The original required delivery date is August 5, 2026, and the solicitation response deadline is August 17, 2026. Government use fields indicate this procurement is tied to explosive ordnance disposal operations under project WK5 TP 1, with assigned supply identifiers and shipping codes.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332919
New
DIBBS
SLEEVE AND SLIDE, DI
Solicitation # SPE4A5-26-T-324S
The contract pertains to the procurement of two units of a Sleeve and Slide, Directional Control Linear Valve with NSN 4820-01-583-7432, under solicitation SPE4A5-26-T-324S, issued by the Department of Defense’s ASC Supplier Oper OEM Division. Delivery is required within 171 days after contract award, and the product must comply with stringent quality and packaging standards outlined in DLA’s Master List of Technical and Quality Requirements, identified by R and I numbers. Mandatory adherence to tailored higher-level contract quality requirements applies to both manufacturers and non-manufacturers, with specific provisions for the removal of government identification from non-accepted supplies. Sampling and inspection protocols must follow MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0, unless otherwise stated in the contract. All unspecified attributes are treated as major, and acceptance requires zero non-conformances in the sample unless the contract permits otherwise. The place of performance is Cherry Point, NC, and the point of contact is Donetta Nelson, reachable via email and phone provided. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, under a NAICS code of 332919 for other fabricated metal product manufacturing.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332919
New
DIBBS
REDUCER, TUBE
Solicitation # SPE7M3-26-T-7823
The contract pertains to the procurement of a reducer tube with NSN 4730-01-619-2252, under solicitation SPE7M3-26-T-7823, requiring two units to be delivered within 20 days FOB origin. Strict compliance with DLA packaging standards is mandated, including adherence to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization governed by RP001. The use of Class I ozone-depleting chemicals is explicitly prohibited in all delivered items, overriding any conflicting specification requirements, and any substitute chemicals must be submitted for approval unless already authorized. The delivery destination is the Maneuver Training Center at Camp Atterbury in Edinburgh, Indiana, with inspection and acceptance occurring at that location. Shipment must be sent by the fastest traceable means, excluding parcel post, and is identified by RDD 555 and project TP 3. The unit of issue is EA with no variance allowed in quantity. All technical and quality requirements are sourced from the DLA Master List, which takes precedence over other standards. The contract specifies the point of contact, purchase request number, and delivery timeline with an original required delivery date of July 31, 2026.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 326122
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M0-26-T-029V
The contract is for the procurement of a metallic tube with NSN 4710-01-682-4309 and purchase request number 7017719849, requiring a quantity of six feet delivered within five days. Delivery is FOB origin with a quantity variance of plus 10 percent and minus zero percent, and inspection and acceptance occur at the destination. The product must comply with SAE AMS5647 specifications and is subject to DLA’s packaging requirements per MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, materials, and marking codes without special identification. Ozone-depleting chemicals are strictly prohibited, and any substitute materials must be approved unless already authorized by the specification. Packaging must be palletized per DLA guidelines, and shipments must use traceable freight methods—parcel post is expressly forbidden. The delivery destination is Little Rock Air Force Base, Arkansas, and the contract mandates adherence to all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The contract is issued under solicitation SPE7M0-26-T-029V with a required delivery date of August 3, 2026, and a response deadline of August 17, 2026, under the NAICS code 326122 for the Department of Defense.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334418
New
DIBBS
FLASHER, THERMAL
Solicitation # SPE7M0-26-T-028Q
The contract pertains to the procurement of one unit of a thermal flasher with NSN 5945-01-516-9383 and purchase request number 7017726988, under solicitation SPE7M0-26-T-028Q. Delivery is required within five days of award, with shipment FOB origin and no tolerance for quantity variance. Inspection and acceptance both occur at the destination, and packaging must comply with MIL-STD-2073-1E, including specific preservation methods, packaging materials, and unit container codes. Marking must adhere to MIL-STD-129 and include the special code ZZ for additional requirements, particularly the mandatory application of lead content markings per IPC/JEDEC J-STD-609 on each individual unit package, with placement governed by the standard’s section 6.2. Copies of the standard are to be obtained from IPC or JEDEC. The item must be shipped by the fastest traceable means, explicitly excluding parcel post, to the designated government address at Blount Island, Jacksonville, Florida. The required delivery date is August 5, 2026, and the solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026. The contracting activity is under the Department of Defense, specifically the Maritime Supply Chain ESOC Buys office, with primary contact Laurie Wassmuth.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332999
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE7M0-26-T-029R
The contract is for the procurement of two cable assemblies under solicitation SPE7M0-26-T-029R, with a total small business set-aside and a NAICS code of 332999. The delivery requirement is strictly five days after delivery order, and the solicitation closed on August 17, 2026, issued on August 4, 2026. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation or award date depending on the acquisition size. The item involves covered defense information and is subject to export control under ITAR or EAR, meaning any disclosure to foreign persons, including within the U.S., requires prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs this data, and only contractors with approved U.S./Canada Joint Certification Program status, completion of mandatory DOD export training, and DLA approval may access the technical data. The place of performance is Tobyhanna, Pennsylvania, and the point of contact is Gerard Quinn of the Department of Defense’s Maritime Supply Chain ESOC Buys office.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332996
New
DIBBS
COUPLING HALF, QUICK
Solicitation # SPE7M0-26-T-028M
The contract pertains to a quick-disconnect coupling half, identified by NSN 4730-01-516-8346, with a quantity of one unit. It is classified as a commercial off-the-shelf item, and adequate catalog data is available to the procurement agency for evaluating alternatives. The item must comply with the DLA Packaging Requirements for Procurement and incorporate technical and quality specifications referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The procurement is subject to the removal of government identification from non-accepted supplies. The solicitation number is SPE7M0-26-T-028M, posted on August 4, 2026, with responses due by August 17, 2026. The NAICS code is 332996, and the contracting agency is the Department of Defense through the Maritime Supply Chain ESOC Buys office, with performance located in Jacksonville, Florida, 32226-3404. Delivery is required within five days after delivery order issuance.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M0-26-T-030Q
This contract specifies the procurement of a nonmetallic hose assembly with the NSN 4720-01-710-6978 and part number 12647529-2, requiring strict adherence to technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements. The item is classified as a TYPE I (CODE W) with a non-extendable shelf life of 120 months, and supply chain traceability documentation must be retained by the contractor in accordance with DLA Directive Procurement Notes #C03 from August 2016. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking code 32 for shelf-life identification, and palletization must meet DLA packaging requirements. The item is subject to full and open competition with no quantity variance allowed, and delivery is required within five days FOB origin to Fort Bliss, Texas, via traceable freight methods excluding parcel post. The contract is issued under solicitation SPE7M0-26-T-030Q with a required delivery date of August 4, 2026, and a response deadline of August 17, 2026. The unit of issue is each (EA), with a single unit priced at $1.00, and the point of contact is Abaigael Masterson of the Department of Defense’s Maritime Supply Chain ESOC. All technical data packages reference specific drawings dated between 2015 and 2026, and the item must be shipped via government-designated logistics channels using the provided freight and marking instructions. Government-use fields include internal identifiers such as IPD, DIC, and ADV codes, and the procurement falls under NAICS code 326220 for rubber product manufacturing.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
SHIELDING GASKET, EL
Solicitation # SPE7M0-26-T-030K
The contract specifies the procurement of one shielding gasket, model 0212688-1 from Argon St, Inc., identified by NSN 5999015894105, under solicitation SPE7M0-26-T-030K. Delivery is required within five days of order placement, FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The item must comply with DLA packaging requirements, including MIL-STD-2073-1E for preparation and MIL-STD-129 for marking, with no special marking codes applied. Packaging must be palletized according to DLA standards and conform to hazardous material shipping protocols, explicitly excluding mercury or mercury-containing compounds unless exempted for specific functional uses such as batteries, instruments, or weapon systems, and portable fluorescent lamps must include a secondary containment. The shipment is destined for the U.S. Naval Base in Sasebo, Japan, with a parcel post address and detailed shipping instructions, and includes a required delivery date of August 4, 2026. The contract references the DLA Master List of Technical and Quality Requirements, incorporating all listed R and I numbered specifications, and mandates adherence to DoD unit of issue standards. The point of contact for the solicitation is Gerard Quinn of the Department of Defense, with procurement managed through the Maritime Supply Chain E-SoC Buy unit.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326122
New
DIBBS
CLAMP, HOSE
Solicitation # SPE7M0-26-T-031A
This contract is for the procurement of 20 units of a hose clamp, identified by NSN 4730-01-562-6063 and supplier part number 5388K24 from McMaster-Carr Supply Co, classified as a commercial off-the-shelf item. Delivery is required within five days of award, with FOB origin terms, and no quantity variance is permitted. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 and MIL-STD-129 standards, with DLA’s Master List of Technical and Quality Requirements taking precedence. The unit of issue is each, with a total price of $20.00 per unit, and the full contract is governed by DLA packaging requirements under RP001. The item must be palletized as specified, shipped via the fastest traceable method excluding parcel post, and delivered to the designated military logistics address in Hagerstown, Maryland. Shipping and marking must reference the provided DLA identifiers and contact details, including the military freight identifier W90HYJ and the government-controlled tracking code W90HYJ62110020. The required delivery date is August 4, 2026, and this solicitation is issued under contract SPE7M0-26-T-031A, with procurement under the NAICS code 326122 for the Department of Defense.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326122
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M0-26-T-030E
This contract is for the procurement of a metal tube assembly identified by NSN 4710-01-482-5087 and part number 3929466, supplied by Cummins Inc. under solicitation SPE7M0-26-T-030E. The requirement calls for a single unit to be delivered within five days of contract award, FOB origin, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, which take precedence. Packaging, marking, and labeling must adhere to MIL-STD-129, and palletization must follow DLA packaging standards RP001. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. The delivery must be shipped via traceable means, excluding parcel post, to the specified military address at Fort Lee, Virginia, and must be marked with the designated government control identifiers. The shipment is classified as RDD with NMCS designation and must be sent using a fast, trackable transportation service. The contract includes specific government-only codes for internal tracking and disposition, and the original required delivery date is August 4, 2026. The unit of issue is each, and while the contract lists a purchase request number, the quoted quantity is one unit with a corresponding price of one dollar. The supplier must ensure all technical and quality specifications from the DLA Master List are met, and the solicitation response is due by August 17, 2026.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M0-26-T-029H
The contract specifies the procurement of 40 units of a commercial off the shelf (COTS) electrical plug connector identified by part number HBL400MGN from HUBBELL INC WIRING DEVICE DIV and NSN 5935016743784, with a unit price of $40.00 and a total value of $1,600.00. Delivery is required within five days of order, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging must comply with DLA Master List requirements, MIL-STD-129 labeling, and either ASTM D3951 for non-hazardous items or TQ requirement IP025 if hazardous under FED-STD-313. Palletization must follow RP001 packaging guidelines. The item must be shipped by the fastest traceable means, excluding parcel post, to the designated receiving facility in Tobyhanna, Pennsylvania, with freight addressed to ASARS 1C BAY 6. The required delivery date is August 3, 2026, and the contract reference is SPE7M0-26-T-029H, governed by DLA technical and quality standards that supersede all other specifications. The point of contact is Gerard Quinn, and the solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026.
Electronic Connector Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326122
New
DIBBS
ADAPTER, STRAIGHT, PI
Solicitation # SPE7M0-26-T-029N
The contract is for the procurement of four straight adapters, part number 4730-01-718-5915, under solicitation SPE7M0-26-T-029N, with a required delivery within five days of award. The item is subject to strict technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, and compliance is mandatory. The supplier must adhere to DLA packaging standards and is prohibited from using any Class I ozone-depleting chemicals in manufacturing or packaging, regardless of existing specification provisions; any substitute chemicals require prior approval unless explicitly authorized. The technical data associated with this item is subject to export control under ITAR or EAR, and disclosure to foreign persons—even within the U.S.—is restricted. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access this data. The contract falls under NAICS code 326122 and is managed by the Department of Defense’s Maritime Supply Chain ESOC Buys office, with performance location in Portsmouth, NH. The solicitation was posted on August 4, 2026, with responses due by August 17, 2026, and primary point of contact is Kathleen Hipes at the provided DLA email and phone number.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326122
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M0-26-T-029B
This contract specifies the procurement of a single metal tube assembly with NSN 4710-01-680-7501 and part number 938456, supplied by DRS Sustainment Systems, Inc. The requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951 for packaging. All items must be packaged and marked in compliance with MIL-STD-129, palletized according to DLA Packaging Requirements, and delivered FOB origin within five days of contract award. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials must be pre-approved unless explicitly authorized by specification. The sole delivery quantity is one unit, with zero variance allowed, and inspection and acceptance occur at the destination. The item must be shipped using the fastest traceable means, excluding parcel post, to the specified logistics warehouse at Fort Hood, Texas, with the designated military shipping identifier and reference codes. The contract is issued under solicitation number SPE7M0-26-T-029B with an original required delivery date of August 3, 2026, and a posted date of August 4, 2026. Performance is tied to a DoD unit of issue, and the corresponding ANSI X12 unit must be referenced through the official DLA link. All packaging and labeling must reflect the specified Unit of Issue and Quantity per Unit Pack. The project is identified under GB4 TP 1 with a technical control number W507HD62102016 and RDD 266. Government-use-only fields indicate the contract’s administrative and distribution codes. The supplier is required to adhere to all DLA directives, procurement standards, and environmental prohibitions, with full compliance verified upon arrival at the designated facility.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326122
New
DIBBS
NIPPLE, HOSE
Solicitation # SPE7M0-26-T-030U
The contract is for the procurement of two NIPPLE, HOSE items with NSN 4730-99-613-4007 and part number 816/90041 from J.C. BAMFORD EXCAVATORS LIMITED, under solicitation SPE7M0-26-T-030U. Delivery is required within five days of award, FOB origin, with no variance allowed in quantity—exactly two units must be supplied. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards including ASTM D3951. Packaging must conform to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization as specified. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless already authorized by specification. No shelf life requirement applies to this item. The delivery location is W8002S, 0189 CS BN CO A COMPOSITE, AWCF SSA, 2530 TAYLOR STREET, BUILDING 2530, FORT BRAGG, NC 28310, with the same markfor address. Shipment must be sent via fast, traceable means and parcel post is prohibited. Inspection and acceptance occur at the destination. The Unit of Issue is EA, with a unit price of $2.00 per item, totaling $4.00. The required delivery date is August 4, 2026, and the contract incorporates specific government use codes and identifiers for tracking. The solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026, under NAICS code 326122 and is managed by the Department of Defense’s Maritime Supply Chain ESOC Buys office.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details