Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

ADHESIVE

Awarded

SPE8ES26F95QWFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Delivery order SPE8ES26F95QW was issued on September 2, 2026, by the Defense Logistics Agency Troop Support under the broader administrative contract SPE8ES24D0005. The order was awarded to ASRC Federal Facilities Logistics, LLC, identified by CAGE code 79343, for the procurement of adhesive under NSN 8040000922816 and PR 7018171992. The total value of this specific award is 177.16 dollars, with a required delivery date of September 10, 2026, to Joint Base Elmendorf-Richardson in Alaska. The procurement falls under NAICS code 325520 and is part of a larger delivery order framework established on March 8, 2024. The parent contract, SPE8ES24D0005, is an administrative vehicle for FSG80 intended for the issuance of non-FMS delivery orders and carries a total award ceiling of 950 million dollars.

General Info

DLA awarded ASRC Federal $177.16 for adhesive delivery to Joint Base Elmendorf-Richardson.

Agency

Department Of Defense → Defense Logistics Agency

Contract Value

$177.16

NAICS

325520 - Adhesive Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Awardee

ASRC FEDERAL FACILITIES LOGISTICS,

Award Issued Date

09/02/2026, 12:00:00 AM UTC

Documents

2

SPE8ES-24-D-0005 Award

award

High

SPE8ES-26-F-95QW Delivery Order

task-order-award

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedSep 2

Award Notice

AwardedSep 2

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeUSA

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressUSA

ContactsNo contact information available

Full Description

Show more

DLA award SPE8ES26F95QW posted on DIBBS. Awardee: ASRC FEDERAL FACILITIES LOGISTICS, (CAGE 79343) Total Contract Price: $177.16 Award Date: 09-02-2026 Delivery order under: SPE8ES24D0005 Line items: - ADHESIVE (NSN/Part 8040000922816, PR 7018171992)

Similar Contracts

Same NAICS industry code

Silver-Filled Conductive Epoxy Adhesive Manufacturer/Supplier

Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

Resin Epoxy Supplier (NSN 8040-01-702-6043)

DLA DIST OKC KO CP

POSTED

about 3 hours ago

DEADLINE

Resin Epoxy Material Supplier

DLA DIST OKC KO CP

POSTED

about 3 hours ago

DEADLINE

Supplier of Specialized Aerosol Adhesive (NSN 8040-01-215-0980)

Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8ES-27-T-0118

Solicitation SPE8ES-27-T-0118 is issued by the Defense Logistics Agency for the procurement of adhesive, identified by NSN 8040-01-215-0980. The requirement consists of two line items, each for three boxes, where each box contains twelve 24-oz aerosol cans with 18 oz of net weight adhesive. Delivery is required within five days after receipt of order, with a required delivery date of October 20, 2026. The items are to be delivered FOB Destination to the NAVSUP Fleet Logistic Center in Yokosuka, Japan. Due to the hazardous nature of the material, the contractor must comply with strict safety and storage regulations, including a storage temperature range of 60-80 degrees Fahrenheit. Compliance with the Hazard Communication Standard 29 CFR 1910.1200 is mandatory, requiring the submission of Safety Data Sheets and hazard warning labels prior to award. The product is subject to a 12-month non-extendable shelf life, and the contractor must ensure that at least 85 percent of the shelf life remains upon receipt by the government. Packaging and marking must adhere to MIL-STD-129, MIL-STD-2073-1E, and DLA packaging requirements. The contract incorporates several federal regulations, including the Buy American and Balance of Payments Program and NIST SP 800-171 assessment requirements for cybersecurity. Inspection and acceptance will occur at the destination. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Offerors must be registered in the System for Award Management under NAICS code 325520.

Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8ES-27-T-0111

Solicitation SPE8ES-27-T-0111 is a federal procurement for amber-colored adhesive, specifically Permatex part number 27828, in 16.75 fluid ounce aerosol cans. The Department of Defense, through DLA Distribution San Joaquin, requires a quantity of 10 units to be delivered FOB Destination to Tracy, California. The original required delivery date is June 6, 2027, with a need ship date of April 12, 2027, and a delivery period of 167 days. The item is classified as a Type I item with a non-extendable shelf life of 24 months and must be stored between 46 and 82 degrees Fahrenheit. The contract mandates strict adherence to hazardous material standards, including the Hazard Communication Standard 29 CFR 1910.1200 and IP025 for packaging, marking, and shipping. Packaging must comply with MIL-STD-2073-1E, and marking must follow MIL-STD-129, including Special Marking Code 32. Palletization must align with RP001 requirements. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American Act and DFARS safeguarding of covered defense information. Inspection and acceptance will occur at the destination.

DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

HARDENER, ADHESIVE

Solicitation # SPE8ES-27-T-0107

Solicitation SPE8ES-27-T-0107 is a request for the procurement of one 1.75 ounce bottle of adhesive hardener, identified by NSN 8040014405474. The requirement specifies Loctite Corporation part numbers 135276, 18861, or 7387. The item is classified as a Type I (Code H) product with a non-extendable shelf life of 12 months. A critical quality requirement is that the product must maintain at least 85 percent of its shelf life upon receipt by the government. Delivery is required within 20 days after the order, with the destination and acceptance point located at Vandenberg SFB, California. Storage must be maintained between 46 and 70 degrees Fahrenheit to prevent adverse effects on product properties. As the item is classified as hazardous material, the supplier must submit Safety Data Sheets and Hazard Communication Standard labels for review and approval prior to the award in accordance with 29 CFR 1910.1200. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, including specific shelf life and hazardous material labeling. The contract incorporates various FAR and DFARS clauses, including the Buy American Act, NIST SP 800-171 assessment requirements, and the prohibition of hexavalent chromium. Payment and receiving reports are to be processed electronically via the Wide Area WorkFlow system.

Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8ES-27-T-0117

Solicitation SPE8ES-27-T-0117 is issued by the Defense Logistics Agency for the procurement of 2,000 one-pound kits of silver-filled conductive epoxy adhesive, conforming to Federal Specification MMM-A-1931. The material must be Type II with a volume resistivity of 0.003 ohms/cm. This is a fully competitive acquisition with a delivery requirement of five days after receipt of order, with shipping destinations located in Okinawa, Japan, and APO AP, USA. The contract specifies a shelf life of 12 months for this item and requires destination inspection. Suppliers must adhere to strict packaging and safety standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for preservation. Because the adhesive is classified as hazardous material, contractors must submit Safety Data Sheets and Hazardous Communication Standard labels in accordance with 29 CFR 1910.1200 and Federal Standard No. 313-E prior to award; failure to do so may result in being deemed ineligible for award. Administrative requirements include the use of the Wide Area Workflow system for invoicing and compliance with the Buy American Act and Berry Amendment. Quotes must be submitted via the DIBBS portal by October 26, 2026.

Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8ES-27-T-0115

Solicitation SPE8ES-27-T-0115 is for the procurement of six kits of resin epoxy, identified by NSN 8040-01-710-7405 and part number HB FULLER EY-3804-A/B. The contract is managed by the Defense Logistics Agency Distribution Oklahoma City Contracting Office, with delivery required within five days of award to Tinker AFB, Oklahoma. This is a critical application item with a 12-month extendable shelf life, requiring strict adherence to special marking code 33 and specific packaging standards including MIL-STD-2073-1E and RP001. The contractor must comply with comprehensive hazardous material regulations, including IP025 for shipping and the Hazard Communication Standard 29 CFR 1910.1200 for labeling. Inspection and acceptance will occur at the destination per FAR 52.246-1. Administrative requirements include the use of the Wide Area Workflow system for invoicing and adherence to the Buy American Act and Berry Amendment for domestic sourcing. The solicitation falls under NAICS code 325520 and incorporates various federal and defense clauses regarding cybersecurity, telecommunications equipment restrictions, and the safeguarding of covered defense information.

DLA DIST OKC KO CP

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8ES-27-T-0113

Solicitation SPE8ES-27-T-0113 is a fixed-price procurement issued by the Defense Logistics Agency Distribution Oklahoma City Contracting Office for the supply of Resin Epoxy, identified by NSN 8040017026043. The requirement is for two kits with a required delivery date of October 19, 2026, and a delivery timeline of five days after the order is placed. Delivery is set as FOB Destination to Tinker AFB, Oklahoma. This item is designated as a critical application item with a twelve-month extendable shelf life under requirement RS055. The contract mandates strict adherence to technical and quality standards, including MIL-STD-129 for marking, MIL-STD-2073-1E for packaging, and the Hazard Communication Standard for hazardous materials labeling. All shipments must comply with DLA packaging requirements for procurement and hazardous materials shipping guidelines. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. The solicitation is categorized under NAICS code 325520 and incorporates various DFARS and FAR clauses regarding cybersecurity, domestic sourcing, and the prohibition of covered telecommunications equipment.

DLA DIST OKC KO CP

POSTED

about 3 hours ago

DEADLINE

HARDENER, ADHESIVE

Solicitation # SPE8ES-27-Q-0008

Solicitation SPE8ES-27-Q-0008 is a firm-fixed-price procurement issued by the DLA Troop Support Construction and Equipment office for the supply of one gallon of adhesive hardener, identified by NSN 8040-01-596-9091. The requirement is for a critical application item with a 12-month extendable shelf life, specifically referencing products from Hexion Inc. or Polynt Composites USA Inc. Delivery is required within 60 days after receipt of the order, with the destination and acceptance point located at the Trident Refit Facility in Kings Bay, Georgia. Due to the nature of the material, the shipment must be made via the fastest traceable means, and the use of parcel post is strictly prohibited. The contract incorporates stringent safety and regulatory requirements, including the mandatory submission of Safety Data Sheets and hazard communication labels per 29 CFR 1910.1200. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for shelf-life marking and hazardous material handling. Administrative compliance requires the use of the Wide Area WorkFlow system for invoicing and payment. Additionally, the solicitation mandates compliance with DFARS regulations regarding the safeguarding of covered defense information and prohibits contracting with entities that employ lobbyists for Chinese military companies. All quotes must be submitted through the DLA Internet Bid Board System.

OFFICE OF THE COMPETITION ADVOCATE BUILDING

POSTED

DEADLINE

Sealing Compound Kit ManufacturerThis subcontract involves the manufacture and supply of 100 kits of specialized two-part sealing compounds under NSN 8030-01-706-7920 for prime contractors supporting DLA Troop Support. The selected provider must possess the necessary chemical formulation and cartridge filling equipment to produce a dark brown compound by mixing black Part A and off-white Part B. Each 6oz cartridge must contain 3.5oz of material and maintain a minimum shelf life of nine months. The contract requires strict adherence to safety standards, including the provision of SDS and hazard labels in compliance with 29 CFR 1910.1200. Performance will take place at Tinker AFB, and the project falls under NAICS code 325520. The procurement is managed by the Department of Defense through the DLA DIST OKC KO CP agency.

DLA DIST OKC KO CP

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Casting and Forging for Valve Seat

Iron and Steel Forging

POSTED

about 3 hours ago

DEADLINE

Valve Seat Fabrication and Manufacturing

POSTED

about 3 hours ago

DEADLINE

Supply of Neutra Rust 661 Rust Arresting Coating

Soap and Other Detergent Manufacturing

POSTED

about 3 hours ago

DEADLINE

Supply of Raw Materials or Components for Globe Valve NSN 4820015547192

POSTED

about 3 hours ago

DEADLINE

Manufacture and Supply of Globe Valves (NSN 4820015547192)

Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

Welding Nozzle Supplier/Manufacturer

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

Nut and Bolt Retainer Supplier

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

Helical Compression Spring Supplier (NSN 5360-01-627-5886)

Spring Manufacturing

POSTED

about 3 hours ago

DEADLINE

Manufacture and Supply of Calibrated Flow Regulator Valves

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

Welding Nozzle Supply (NSN 3431016286821)

Welding and Soldering Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

Supply of Valve Stem Guides (NSN 4820-01-278-5687)

Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS