This Solicitation opportunity from Department Of Defense was posted on August 12, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

ADHESIVE

Closed

SPE8ES-26-T-2567Federal

Submission Closed08/18/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 325520

New

DIBBS

Corrosion Resistant Coating SupplierThis subcontract opportunity through DLA DIST SAN JOAQUIN requires a supplier to provide 15 pints of chemically treated corrosion-resistant coating. The material must conform to specification MIL-DTL-81706B(1) Revision B and be identified by NSN 8030016269987. The supplier will support prime contractors delivering DLA Troop Support Construction and Equipment contracts and is responsible for managing logistics for FOB Destination delivery. Eligible bidders must possess a valid CAGE code and active SAM registration. The performance location for this contract is in Tracy, California. Interested parties must submit their responses by the deadline of November 3, 2026.

POSTED

DEADLINE

Supply of Specialized Sealant (NSN 8030014651390)This subcontract involves the supply of specialized sealant, identified by NSN 8030014651390, to support prime contractors under Defense Logistics Agency Troop Support Construction and Equipment contracts. The selected provider must ensure all materials meet strict NSN specifications and are packaged according to MIL-STD-2073-1E. Additionally, the sealant must be maintained at a room temperature between 60 and 80 degrees Fahrenheit to ensure product integrity. The agreement requires the delivery of two units FOB Destination to Fort Carson, Colorado, within five days of the contract award. Managed under NAICS code 325520 for the Department of Defense, the contract focuses on the timely and compliant shipment of these specialized units to meet agency requirements.

Defense Logistics Agency

POSTED

DEADLINE

Supplier of Adhesive Primer (NSN 8040-01-644-9395)This subcontract through the Defense Logistics Agency involves the supply of Type I adhesive primer, identified by NSN 8040-01-644-9395, for prime contractors supporting DLA Troop Support. The supplier must ensure the product meets the DLA Master List of Technical and Quality Requirements and adheres to strict temperature-controlled logistics, maintaining storage and shipment conditions between 60 and 80 degrees Fahrenheit. The scope of work requires the delivery of one pint of primer to Fort Campbell, Kentucky. All items must be packaged and marked in accordance with MIL-STD-2073-1E, RP001, and MIL-STD-129 standards. This requirement falls under NAICS code 325520 and is managed by the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

Supplier of Sealing Compound (NSN 8030-01-309-1446)This subcontract involves the supply of specialized sealing compound, identified by NSN 8030013091446, to prime contractors supporting Defense Logistics Agency supply contracts. The agreement requires the delivery of two units with a minimum shelf life of nine months. All materials must strictly adhere to MIL-R-47211A(1) Revision A and meet NAVAIR aircraft launch and recovery equipment traceability standards. The supplier is responsible for ensuring all packaging and marking comply with MIL-STD-2073-1E, MIL-STD-129, and RP001. Additionally, all safety data sheets and labels must be compliant with GHS and Federal Standard No. 313-E. Performance for this contract is centered in Patuxent River, with the procurement falling under NAICS code 325520.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Specialized Adhesive (NSN 8040-00-858-9798)This subcontract involves the procurement and delivery of 2,000 kits of specialized adhesive, identified by NSN 8040008589798, to support prime contractors under DLA Troop Support supply contracts. The Department of Defense, specifically DLA DIST OKC KO CP, requires the materials to be delivered to Tinker AFB by October 29, 2026, utilizing the fastest traceable means of transport. Compliance with hazardous material labeling is mandatory per DFARS 252.223-7001 and Federal Standard No. 313. Additionally, the successful contractor must maintain active registrations in both the System for Award Management and the Wide Area Workflow system to facilitate contract administration and payment.

POSTED

DEADLINE

Gray Adhesive Supplier (NSN 8040-01-415-7040)This subcontract involves the supply of gray adhesive for prime contractors supporting Defense Logistics Agency contracts. The requirement is for one box containing six 1-pint kits that adhere to NSN 8040-01-415-7040 specifications, featuring a non-extendable shelf life of 24 months. All materials must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 using Special Marking Code 32, with labels and safety data sheets compliant with 29 CFR 1910.1200. The contract mandates strict adherence to the Buy American Act and requires delivery FOB Destination to Fort Campbell, Kentucky. Classified under NAICS code 325520, the opportunity was posted on October 28, 2026, with a response deadline of November 3, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Manufacture and Supply of Blind Rivets (NSN 5320-01-195-3006)This subcontract involves the manufacture and supply of five precision-manufactured blind rivets, identified as NSN 5320-01-195-3006, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires strict adherence to technical specifications, including NASM90354, ASME B46.1 for surface roughness, and ASME Y14.5 for dimensioning. Additionally, part marking must comply with MIL-STD-13, and the use of additive manufacturing is strictly prohibited. The selected provider must maintain a quality system certified under SAE AS9003 or ISO 9001 and utilize MIL-STD-1916 sampling methods. Final deliverables must be packaged according to ASTM D3951 and MIL-STD-129 standards. Performance for this Department of Defense contract is centered at Hill AFB, with a response deadline set for November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Specialized Putty (NSN 8030-01-599-2182)This subcontract involves the procurement of specialized putty, identified by NSN 8030-01-599-2182, to support prime contractors fulfilling DLA Troop Support supply contracts. The Department of Defense, specifically DLA DIST SAN JOAQUIN, requires 15 lbs of material with a quantity variance allowance of plus or minus 10 percent. All supplies must be of domestic origin and strictly adhere to NSN specifications. Compliance with military standards is mandatory, with packaging required per MIL-STD-2073-1E and marking required per MIL-STD-129. The place of performance for this contract is located in Tracy, zip code 95304-5000. The solicitation was posted on October 28, 2026, with a response deadline of November 3, 2026, under NAICS code 325520.

POSTED

DEADLINE

Specialized Adhesive Supplier (NSN 8040-01-129-2558)This subcontract involves the manufacture or sourcing of specialized adhesive meeting NSN 8040-01-129-2558 specifications to support prime contractors delivering DLA supply contracts. The supplier is responsible for providing 12 pints of adhesive, packaged in one-pint cans according to MIL-STD-2073-1E and MIL-STD-129 standards. The product must have a non-extendable shelf life of 12 months and include all necessary labels and safety data sheets in compliance with 29 CFR 1910.1200 and Federal Standard No. 313-E. The contract is managed under NAICS code 325520 for the Department of Defense, specifically for DLA Distribution San Joaquin. Delivery is required FOB Destination to the facility located in Tracy, California. Interested parties must adhere to the response deadline of November 3, 2026.

POSTED

DEADLINE

Solicitation # SPE8ES-27-T-0196

Solicitation SPE8ES-27-T-0196 is a request for quotations for the procurement of adhesive, identified by NSN 8040-01-129-2558. The requirement consists of 12 pints, with each unit packaged in a one-pint can. The items are to be delivered FOB Destination to DLA Distribution San Joaquin in Tracy, California, with a need ship date of February 20, 2027, and an original required delivery date of April 3, 2027. The contract specifies a non-extendable shelf life of 12 months for Type I (Code H) items. Due to the hazardous nature of the material, the contractor must comply with strict safety and labeling standards. This includes the submission of Safety Data Sheets (SDS) and labels consistent with 29 CFR 1910.1200 and Federal Standard No. 313-E prior to award. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for lot or batch numbers and special marking code 32. Palletization must follow DLA packaging requirements RP001. The procurement is governed by various FAR and DFARS clauses, including those related to cybersecurity safeguarding of covered defense information, the Buy American Act, and the prohibition of hexavalent chromium. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow (WAWF) system. Evaluation may include a price preference for HUBZone concerns, and the successful offeror must be registered in the System for Award Management (SAM).

POSTED

DEADLINE

Solicitation # SPE8ES-27-T-0207

Solicitation SPE8ES-27-T-0207 is a request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of one unit of yellow adhesive, identified by NSN 8040-01-663-3917. The requirement specifies a 5.0-ounce size and includes a shelf life requirement of 12 months, which is extendable. Delivery is required within 20 days of award, with a required delivery date of October 29, 2026. The shipment is designated as FOB Destination to Nellis Air Force Base, Nevada, and must be transported via the fastest traceable means, excluding parcel post. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and Special Marking Code 33 for shelf life. Because the item is classified as hazardous material, the supplier must comply with IP025 and the Hazard Communication Standard 29 CFR 1910.1200, which requires the submission of Safety Data Sheets and specific hazard labels for approval prior to award. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with the Buy American and Balance of Payments Program. Additionally, the contract incorporates cybersecurity reporting standards under DFARS 252.204-7012 and requires offerors to validate their socioeconomic status and telecommunications certifications via the System for Award Management.

Defense Logistics Agency

POSTED

DEADLINE

TAPE, INSULATION, ELE

Solicitation # SPE4A0-27-T-0378

Solicitation SPE4A0-27-T-0378 is a request for quotations issued by the Defense Logistics Agency, Department of Defense, for the procurement of electrical insulation tape, identified by NSN 5970-01-012-4280. The requirement consists of multiple line items, with each unit of issue containing 36 yards of tape. Delivery is required within five days of award, with specific delivery dates set for September 2 and October 1, 2026. Shipments are directed to locations in Peoria, Illinois, and Tyndall Air Force Base, Florida, with FOB, inspection, and acceptance all occurring at the point of origin. The procurement is subject to strict quality and manufacturing standards, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Sampling must follow MIL-STD-1916 or ASQ H1331, and items must adhere to BASIC CID A-A-59474D. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, respectively, with a specific prohibition on the use of mercury or mercury compounds. Notably, the government will not evaluate or award contracts to offerors providing items produced via additive manufacturing. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment. Offerors must be registered in the System for Award Management and comply with various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting requirements. Price evaluation preferences are available for certified HUBZone small business concerns, and quotes should be submitted via DIBBS.

Defense Logistics Agency

POSTED

about 10 hours ago

DEADLINE

in 8 days

AI Contract Overview

This contract is for the procurement of a gray solid paste adhesive, specifically identified as NSN 8040-01-685-5306, with a quantity of two tubes. The item is associated with Momentive Performance Materials Inc and RS Hughes Co Inc. It has a non-extendable shelf life of 12 months and must be stored between 60 and 80 degrees Fahrenheit. Delivery is required within five days to the USS Patrick Gallagher at Bath Iron Works in West Bath, Maine, via the fastest traceable means. The agreement mandates strict adherence to DLA packaging and marking requirements, including MIL-STD-129 and MIL-STD-2073-1E. Because the material is hazardous, the supplier must provide Safety Data Sheets and Hazard Communication Standard labels in accordance with 29 C.F.R. 1910.1200 and Federal Standard No. 313-E prior to the award. All technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the order.

General Info

Procure two tubes of gray adhesive for USS Patrick Gallagher within five days.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

325520 - Adhesive Manufacturing

Place of Performance

76 NEW MEADOWS ROAD, WEST BATH, ME, 04530, USA

Set-Aside

NONE

Documents

Request for Quotations SPE8ES-26-T-2567

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedAug 12

Solicitation

Response DeadlineAug 18

Deadline has passed

Submission Closed

08/18/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Defense Logistics Agency

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressUSA

Contacts

Stephen Ockenhouse

contact@example.gov

Full Description

ADHESIVE
ADHESIVE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
SPE8ES-26-T-2567
SECTION B
https://www.osha.gov/dsg/hazcom/index.html
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
U/I = TU
SIZE: 2.80 OUNCES
COLOR: GRAY/GREY
PHYSICAL FORM: SOLID PASTE
RS011: Shelf-life requirement RS001 for a TYPE I (CODE H) item with a shelf life of 12 months (non-extendable) applies to this item.
MOMENTIVE PERFORMANCE MATERIALS INC. 01139 P/N 9367 RS HUGHES CO INC 39LP7 P/N RTV157 2.8 OZ TUBE
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017844221 0001 TU 2.000
NSN/MATERIAL:8040016855306
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
STORE BETWEEN 60-80 DEG F
PARCEL POST ADDRESS:
SPE8ES-26-T-2567
SECTION B
PR: 7017844221 PRLI: 0001 CONT’D
N50408
DDG 127 USS PATRICK GALLAGHER
US NAVY SUPSHIP BATH IRON WORKS
76 NEW MEADOWS ROAD
WEST BATH ME 04530
US
RDD 999/NMCS SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N50408
DDG 127 USS PATRICK GALLAGHER
US NAVY SUPSHIP BATH IRON WORKS
76 NEW MEADOWS ROAD
WEST BATH ME 04530
US
M/F: (TCN) N6278662220893
RDD: 999
PROJ: MP9 TP 1
SUPP ADD: N50408 SIG: J
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A4A DIST: 9B ADV: 2G FC: MQ
Need Ship Date:00/00/0000 Original Required Delivery Date:08/14/2026
SPE8ES-26-T-2567 NSN/Part Number: 8040-01-685-5306 Quantity: 2 TU Purchase Request: 7017844221QTY: 2 Delivery: 5 days ADO