Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

ADHESIVE

Active
SPE8ES-26-T-2426Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a tan adhesive product, identified by NSN 8040-01-524-0119 and part number URALANE 5774 A/C, supplied in three one-quart kits per box, with a total requirement of two boxes. The adhesive is classified as a Type I (Code F) item with a non-extendable shelf life of six months, starting from the date of shipment or packaging, and must be stored in its original sealed container at temperatures between 70–90°F with no refrigeration permitted. Delivery is required within five days FOB destination, with no tolerance for variance in quantity, and inspection and acceptance occur at the delivery point. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including marking with the lot or batch number and the special code 32 indicating Type I shelf-life status, and palletization must meet DLA packaging requirements. Hazardous material handling is governed by updated OSHA Hazard Communication Standard requirements, mandating submission of Safety Data Sheets and compliant labels prior to award, along with employee training on the new labeling system. The adhesive is subject to federal standards for hazardous materials shipping and storage, and shipments must avoid parcel post, using only traceable freight methods to the designated delivery address at Tinker AFB. The solicitation number is SPE8ES-26-T-2426, with a response deadline of July 28, 2026, and the required delivery date is July 24, 2026. Technical and quality requirements referenced via R and I numbers are sourced from the DLA Master List, and the unit of issue follows DoD standards.

General Info

Procure two boxes of Type I URALANE 5774 A/C adhesive, 6-month shelf life, FOB destination, compliant packaging, hazardous material handling required.

Agency

Department Of Defense → DLA DIST OKC KO CPView Agency

NAICS

325520 - Adhesive ManufacturingView NAICS

Place of Performance

7959 5TH ST DR 17 BLDG 16, TINKER AFB, OK, 73145-9156, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8ES-26-T-2426 for DLA Troop Support Construction & Equipment

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA DIST OKC KO CP
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DLA DIST OKC KO CP
View Agency Profile
Office AddressUS
Contacts
Stephen Ockenhouse
contact@example.gov

Full Description

Show more
ADHESIVE
ADHESIVE
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
SPE8ES-26-T-2426
SECTION B
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html
U/I = KT
SIZE: THREE 1 QUART KITS
NOTE:
ONE-QUART KITS CONSISTING OF BASE RESIN AND CURING AGENT IN SEPARATE
CONTAINERS. THREE ONE-QUART KITS SHALL BE PACKAGED IN A BOX.
COLOR: TAN
RS008: Shelf-life requirement RS001 for a TYPE I (CODE F) item with a shelf life of 6 months (non-extendable) applies to this item.
HUNTSMAN ADVANCED MATERIALS AMERICAS 99384 P/N URALANE 5774 A/C 1QT
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017576826 0001 BX 2.000
NSN/MATERIAL:8040015240119
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
MATERIAL SHALL BE STORED IN ORIGINAL SEALED CONTAINER AT TEMPERATURES
SPE8ES-26-T-2426
SECTION B
PR: 7017576826 PRLI: 0001 CONT’D
FROM 70-90°F. DO NOT REFIREGERATE.
MIL-STD-129 LABELS ARE REQUIRED, MIL-STD-129 LABEL WILL INCLUDE THE
ADDITION OF LOT OR BATCH NUMBER.
NOTE:
Interim policy adopting Date of Shipment (DOS) or Date of Packaging (DOP) as acceptable starting of Shelf-Life date for selected FSG 80 items applied.
PARCEL POST ADDRESS:
FY3212
FY3212 AF DLA DIST OKC KO
CP 405 739 2481
7959 5TH ST DR 17 BLDG 16
TINKER AFB OK 73145-9156
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FY3212
FY3212 AF DLA DIST OKC KO
CP 405 739 2481
7959 5TH ST DR 17 BLDG 16
TINKER AFB OK 73145
US
M/F: (TCN) FB203762020021
RDD: 777
PROJ: TP 1
SUPP ADD: FY3212 SIG: J
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: 01 ADV: 2D FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:07/24/2026
SPE8ES-26-T-2426 NSN/Part Number: 8040-01-524-0119 Quantity: 2 BX Purchase Request: 7017576826QTY: 2 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 325520
New
DIBBS
Supply of Military-Spec Metal Conditioning Compound (NSN 8030-00-145-0084)The contract requires the manufacture or sourcing of a Type I Wash-Off Metal Conditioning Compound that meets the exacting standards of MIL-C-10578D and its Amendment 3, ensuring the product performs reliably under military specifications for metal preparation and conditioning. The compound must be packaged in polyethylene-lined metal pails to maintain chemical integrity, prevent contamination, and ensure safe handling and storage throughout the supply chain. Full regulatory compliance is mandated, including adherence to all applicable environmental, safety, and transportation requirements, along with documented shelf-life verification to guarantee product efficacy through its designated expiration period. The contract is issued under the National Stock Number 8030-00-145-0084 by the DLA Dist San Joaquin, part of the Department of Defense, and is classified as a subcontract under NAICS code 325520, which pertains to coating, engraving, and related activities. Responses are due by July 28, 2026, and performance will be conducted at the designated location in Tracy, California, with ZIP code 95304-5000. While no specific set-aside provisions are indicated, the solicitation is open to eligible contractors capable of meeting technical and compliance requirements, with all pertinent details accessible through the official DIBBS link provided.
DLA DIST SAN JOAQUIN

POSTED

about 21 hours ago

DEADLINE

in 5 days
View Details
NAICS: 325520
New
DIBBS
PRIMER, SEALING COMPOUNThis contract specifies the procurement of a solventless primer based on methacrylic ester monomers and organic peroxide, intended for use with anaerobic acrylic threadlocking and retaining compounds. The product is supplied in 1 fluid ounce bottles, with a total quantity of 33 ounces required, and must comply with stringent technical and quality standards referenced through the DLA Master List of Technical and Quality Requirements. The item is classified as a Type I (Code H) product with a non-extendable shelf life of 12 months, requiring strict adherence to storage and shipping temperature ranges of 46°F to 70°F and protection from direct sunlight. All packaging must conform to MIL-STD-2073-1E and MIL-STD-129, including mandatory lot or batch numbering, and intermediate packaging must limit container quantities to no more than 25 per corrugated fiberboard box, with protective separation to prevent damage during transit. The product is classified as hazardous under OSHA’s Hazard Communication Standard, requiring suppliers to submit Safety Data Sheets and compliant labels aligned with 29 C.F.R. 1910.1200 prior to contract award, alongside employee training on these requirements. Packaging and shipment must follow DLA’s packaging requirements and IP025 guidelines for hazardous materials, with delivery FOB destination within 32 days of contract award, no variance allowed in quantity, and inspection and acceptance performed at the destination. The delivery point is DLA Distribution Warner Robins, Georgia, with all marking and labeling strictly regulated. The NSN 8030-01-388-5605 identifies the item, and the contract number SPE8ES-26-T-2418 governs the solicitation, with the required delivery date set for August 31, 2026, and a need ship date of August 30, 2026.
WARNER ROBINS

POSTED

about 21 hours ago

DEADLINE

in 5 days
View Details
NAICS: 325520
New
DIBBS
SEALING COMPOUND
DLA DIST SAN JOAQUIN

POSTED

about 21 hours ago

DEADLINE

in 5 days
View Details
NAICS: 325520
New
DIBBS
METAL CONDITIONINGThe contract specifies the procurement of Metal Conditioning Compound under NSN 8030-00-145-0084, requiring six containers of five gallons each, delivered in accordance with Military Specification MIL-C-10578D and Amendment 3, with Type I Wash-Off formulation. Each container must be packaged in a five-gallon shipping pail and labeled with a MIL-STD-129 label that includes the lot or batch number. The product is procured as fully competitive under a military specification, with a delivery deadline of 66 days after award. Suppliers must comply with all applicable federal safety regulations, including the submission of Safety Data Sheets (SDS) and Hazardous Communication Standard labels in conformance with 29 C.F.R. 1910.1200, effective since June 1, 2015, replacing older Material Safety Data Sheets. Employees must be trained on the updated SDS formats and labeling requirements. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Covered defense information applies, and all submissions must be made to the contracting officer for review and approval prior to award. The solicitation was posted on July 22, 2026, with responses due by July 28, 2026, under DLA San Joaquin, with performance location in Tracy, California.
DLA DIST SAN JOAQUIN

POSTED

about 21 hours ago

DEADLINE

in 6 days
View Details
NAICS: 325520
New
DIBBS
GASKET FORMING COMPOUNThis contract is for the procurement of Gasket Forming Compound, identified by NSN 8030-01-325-6993 and part number LOCTITE CORP 05972 P/N 515-31, with a required quantity of 430 transaction units. The item is classified as a TYPE I (CODE M) with a non-extendable shelf life of 24 months as per RS016 requirement, and it must be free of asbestos as defined in FED-STD-313. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and RP001 DLA Packaging Requirements, including use of a medium-duty, waterproof, greaseproof, opaque bag meeting MIL-DTL-117, TYPE II, CLASS C, STYLE 1, especially for direct vendor delivery, foreign military sales, and stock shipments. All shipments are to be delivered FOB origin within 54 days of contract award, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The delivery point is DLA Dist San Joaquin in Tracy, California, and the required ship date is September 21, 2026, with an original delivery deadline of October 2, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and hazardous material shipping must follow IP025 guidelines. The solicitation number is SPE8ES-26-T-2415, issued under NAICS code 325520 by the Department of Defense through DLA Dist San Joaquin.
DLA DIST SAN JOAQUIN

POSTED

about 21 hours ago

DEADLINE

in 6 days
View Details
NAICS: 325520
New
DIBBS
Supply of Sealing Compound (NSN 8030008237917)The contract outlines the supply of five units of military-grade sealing compound identified by NSN 8030008237917, manufactured to meet federal specifications for performance and quality standards required by defense applications. The product must be delivered FOB destination to Naval Air Station Jacksonville in Florida, ensuring that the supplier assumes all transportation risks and costs until the goods arrive at the designated military location. This agreement falls under the NAICS code 325520, indicating it pertains to the manufacturing of other chemical products, and is classified as a subcontract within the broader procurement framework of the Department of Defense through the Defense Logistics Agency. Delivery must adhere strictly to federal compliance requirements, and while no solicitation number or set-aside details are provided, the contract’s structure implies direct fulfillment under an existing government procurement initiative to support naval maintenance and operational readiness.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 325520
New
DIBBS
Adhesive Supply for Military ApplicationThe contract entails the supply of a specialized adhesive identified by NSN 8040005223429 to Fort Carson, Colorado, under a subcontract awarded by the Defense Logistics Agency on behalf of the Department of Defense. The adhesive is intended for military applications and must fully comply with federal procurement regulations and shipping standards to ensure operational readiness and safety. The NAICS code 325520 indicates the work falls under the manufacturing of other chemical products, affirming the nature of the product as a specialized industrial adhesive. Although the solicitation number and specific point of contact are not provided, the contract is accessible through the DIBBS system via a public link for tracking and administrative purposes. Performance is localized to Fort Carson, and all deliverables must meet rigorous military specifications without exception.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 325520
New
DIBBS
Adhesive Supply and PackagingThe contract obligates the supplier to provide four units of industrial adhesive identified by NSN 8040013943735, ensuring full compliance with applicable federal specifications for performance, safety, and quality. The adhesive must be properly packaged and labeled in accordance with government standards to facilitate handling, storage, and inventory tracking upon arrival. Delivery is governed by FOB destination terms, meaning the supplier assumes all risk and responsibility for transportation costs and potential damages until the goods are received at the designated government location. The contract falls under the NAICS code 325520 for other paint and coating manufacturing and is classified as a subcontract awarded by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 21, 2026, and is accessible through the DIBBS system, though no specific point of contact or place of performance details are provided in the available data.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 325520
New
DIBBS
Supply of Silicone Compound (NSN 6850010463643)The contract pertains to the procurement and delivery of ten units of a military specification compliant silicone compound identified by NSN 6850010463643, with a strict delivery deadline of August 3, 2026. The product must meet all applicable military standards and be shipped to the designated FPO address AE 09712-0001. The contract is classified as a subcontract under NAICS code 325520, indicating involvement in the manufacturing of other rubber products, and is issued by the Defense Logistics Agency under the Department of Defense. The solicitation does not specify a set-aside type or point of contact, and the place of performance is not detailed beyond the delivery destination. The contract was posted on July 21, 2026, and the official record can be accessed via the DIBBS system using the provided link.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 325520
New
DIBBS
Supply of Adhesive under NSN 8040008779872The contract obligates the supplier to manufacture or provide 6,000 units of a military-compliant adhesive designated by NSN 8040008779872, with all deliveries required to be made FOB destination no later than August 4, 2026. The adhesive must meet all relevant military specifications to ensure compatibility and performance in defense applications, and the supplier is responsible for compliance with quality, packaging, and labeling standards associated with the NSN. The contract is structured as a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code 325520 for industrial chemical and allied product manufacturing. Delivery must originate from the supplier’s facility and reach the designated destination as defined by the government’s logistics network.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 325520
New
DIBBS
Chemical Sealer Supply – EPOCAST 1652 A/BThe contract stipulates the supply of 2,000 kilograms of a two-part epoxy chemical sealer identified as EPOCAST 1652 A/B with the NSN 6850001429738, specifically for use by U.S. military operations. All materials must be packaged and labeled in strict compliance with MIL-STD-129R standards to ensure proper handling, tracking, and integration into military logistics systems. The delivery must be completed by August 10, 2026, to a designated U.S. military installation located in Wackernheim, Germany, aligning with operational readiness requirements. The contract falls under the NAICS code 325520, indicating classification within the synthetic resin and synthetic rubber manufacturing industry, and is issued as a subcontract under the authority of the Defense Logistics Agency, an arm of the Department of Defense. The award details are linked to the contract SPE4AX16D9010 with delivery order SPE4A626FZZ80.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 325520
New
DIBBS
Adhesive Supply per NSN 8040001182695The contract entails the supply and delivery of 18,000 kilotons of military-grade adhesive identified by National Stock Number 8040001182695, covering full lifecycle responsibilities from sourcing raw materials through manufacturing, packaging, and labeling to ensure strict compliance with military specifications. All materials must be prepared and transported in accordance with defense logistics standards, with final delivery mandated to Joint Base Lewis-McChord. The undertaking is structured as a subcontract under NAICS code 325520, issued by the Defense Logistics Agency on behalf of the Department of Defense, and was posted on July 21, 2026. Although no set-aside classification or specific point of contact is provided, the scope demands rigorous adherence to federal procurement protocols and quality assurance requirements for defense-grade adhesives.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → DLA DIST OKC KO CP

Same awarding agency

NAICS: 321114
New
DIBBS
SEALING COMPOUNDThe contract specifies the procurement of a sealing compound identified by NSN 8030-01-692-6210 and part number SPZR6320XXBMB11B, supplied by PRC-DESOTO INTERNATIONAL, INC., in a 5.0 gallon unit size with a green color and liquid physical form. A total quantity of 11 gallons is required, to be delivered FOB destination within five days of contract award, with no tolerance for quantity variance. The item is classified as a critical application item with a shelf life of 12 months, extendable under Type 2 (Code 4) conditions per RS055 and RS001 requirements. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking code 33 for shelf life, and palletization per DLA packaging standards. Hazardous material shipping protocols under IP025 apply, and parcel post is explicitly prohibited—shipment must occur via the fastest traceable means. Supply chain traceability documentation must be retained by the contractor in accordance with DLAD Procurement Note C03 from August 2016, and physical identification and removal of government markings are governed by RQ017 and RQ011. Sampling must follow MIL-STD-1916 or ASQ H1331 using zero-defect acceptance criteria unless otherwise stated, with verification levels assigned to critical, major, and minor attributes. All technical and quality requirements referenced by R-numbers are incorporated from the DLA Master List, and compliance with the Hazardous Communication Standard is mandatory. Delivery must be made to Tinker AFB, Oklahoma, with the original required delivery date set for July 17, 2026. The contract is a total small business set-aside under NAICS code 321114, issued by the Defense Logistics Agency Distribution Oklahoma City.
Wood Preservation

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 321114
New
DIBBS
SEALING COMPOUNDThe contract specifies the procurement of a sealing compound identified by NSN 8030-01-702-3380 and part number AC-770 B-2 from 3M Company, with a unit of issue of Case (CS), each containing 24 units. Two cases are required for delivery within five days of award, delivered FOB destination under solicitation SPE8ES-26-T-2396. The item is classified as a critical application item with a Type I (Code G) shelf life of nine months, non-extendable, and must be labeled and documented in strict compliance with OSHA’s revised Hazard Communication Standard (29 C.F.R. 1910.1200), including submission of Safety Data Sheets and compliant labels prior to award. Suppliers must also train employees on these requirements. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129R, with special labeling for shelf life (Code 32), and palletization as per DLA packaging requirements. Hazardous material shipping instructions mandate use of traceable freight only, prohibiting parcel post, and delivery must be made to Tinker AFB, Oklahoma. The item is governed by multiple military and federal standards including MIL-STD-147F, MIL-STD-129R, and FED-STD-313F, and technical quality requirements referenced in the DLA Master List apply. All documentation, labeling, and compliance must be verified before acceptance at the destination.
Wood Preservation

POSTED

2 days ago

DEADLINE

in 4 days
View Details