Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Aerial Lift Safety Certification and Inspection

Active

Federal

Response Deadline08/14/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires a comprehensive safety inspection and certification of two JLG 800AJ aerial lifts to ensure full compliance with ANSI/SIA standards and the manufacturer’s established safety protocols. The work must be performed by a qualified entity capable of verifying structural integrity, operational functionality, emergency systems, and all safety mechanisms according to nationally recognized industry guidelines. The inspection and certification process must document findings, address any non-compliance issues, and provide official certification that the equipment is safe for use in operational environments. This is a small business set aside subcontract under NAICS code 541330, issued by the Department of Defense through the W7MW Uspfo Activity Arang 189 office, with performance required at Little Rock Air Force Base, zip code 72099. The solicitation was posted on July 31, 2026, and responses are due by August 14, 2026, at 3:00 PM. The contractor must possess the technical expertise and certifications necessary to meet federal and manufacturer-specific safety requirements, and all work must be completed to satisfy Department of Defense operational readiness standards.

General Info

Inspection and certification of two JLG 800AJ aerial lifts to meet ANSI/SIA and DoD safety standards at Little Rock AFB.

Agency

Department Of Defense → W7MW Uspfo Activity Arang 189View Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Little Rock Air Force Base, AR, 72099, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 31

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 03:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W7MW Uspfo Activity Arang 189

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W7MW Uspfo Activity Arang 189

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform comprehensive safety inspection and certification of both JLG 800AJ lifts, ensuring compliance with ANSI/SIA standards and manufacturer safety protocols.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to support major construction projects across various phases including planning, design, construction, and closeout. These services will encompass a range of delivery methods such as Design Build, Progressive Design Build, and other alternative project delivery formats, with the primary goal of ensuring projects adhere to authorized schedules, budgets, and quality standards. The contract is intended to streamline oversight and coordination for the Port’s extensive capital improvement initiatives, requiring technical expertise in managing complex infrastructure developments. Primary point of contact for this opportunity is Hala Rabbo, who can be reached via email or phone, with additional support available from Project Manager Ann Davidson. The solicitation is classified under NAICS code 541330, which designates architectural, engineering, and related services. Although the contract is currently posted as a forecast with no official solicitation number or set-aside details, interested parties are encouraged to monitor the provided UI link for updates and future formal solicitations. The performance location will be at various Port of Seattle facilities and project sites, with no specific city or state specified in the metadata, indicating broad geographic scope across Port operations.

Construction Management

POSTED

about 12 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, ensuring optimal performance in a continuous 24/7/365 operational environment. The scope includes identifying and correcting deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance efficiency, comfort, reliability, and lifespan while maintaining compliance with safety and regulatory standards. Services are delivered through Service Directives and require close collaboration with Aviation Facilities and Infrastructure to meet project deliverables. Work will be managed under an Indefinite-Delivery/Indefinite-Quantity contract, with the Port of Seattle’s Aviation Facilities and Infrastructure team as the primary point of contact. The procurement is classified under NAICS code 541330, reflecting professional, scientific, and technical services related to engineering. Key contacts include Jason Gates as the primary point of contact and Jim Farris as the project manager, both reachable through the Port of Seattle’s official communications. The solicitation was posted on July 31, 2026, with performance expected to occur at the airport location, though specific geographic details are not defined in the provided data.

Aviation Facilities & Infrastructure

POSTED

about 12 hours ago

DEADLINE

Engineering Change Proposals & ModificationsThe contract requires the development and submission of engineering change proposals for modifications to sterile storage cabinets, with a focus on conducting thorough impact analyses, accurate cost estimations, and comprehensive technical documentation. All submissions must align with established engineering standards and ensure that proposed changes maintain or enhance the integrity, functionality, and compliance of the cabinets in sterile environments. The work is scoped to deliver detailed proposals that clearly articulate the technical rationale, potential risks, and financial implications of each modification. This is a subcontract set aside exclusively for Service-Disabled Veteran-Owned Small Businesses under the SDVOSB program, with NAICS code 541330 indicating engineering services. The opportunity was posted on August 1, 2026, with a response deadline of August 7, 2026, and performance is expected to take place in Los Angeles, California, with a ZIP code of 90073. The contracting office is the 262-NETWORK Contract Office 22 under the Department of Veterans Affairs, and bidders must be certified SDVOSBs to be eligible for award.

262-NETWORK Contract Office 22 (36C262)

POSTED

about 16 hours ago

DEADLINE

Program Management & Systems Engineering SupportThe contract requires comprehensive program and systems engineering support to oversee the maintenance program across Department of Veterans Affairs sites, focusing on service coordination, compliance reporting, and lifecycle planning. The work involves ensuring operational readiness and regulatory adherence through systematic engineering practices that align with VA standards and mission objectives, with all activities centered at the Los Angeles location with zip code 90073. This is a subcontract under a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside, designated under NAICS code 541330 for engineering services, and is intended to provide targeted opportunities to businesses owned and controlled by service-disabled veterans. All proposals must be submitted by the deadline of August 7, 2026, with the solicitation posted on August 1, 2026, and the award will be managed by the 262-NETWORK Contract Office 22 within the Department of Veterans Affairs.

262-NETWORK Contract Office 22 (36C262)

POSTED

about 16 hours ago

DEADLINE

Zoning & Land Use Planning SupportThe contract seeks advisory services focused on infill development, zoning alignment, and regulatory processes within designated commercial corridors, aiming to support strategic growth and land use efficiency. The work will involve guiding public and private stakeholders through complex planning frameworks to ensure development aligns with municipal goals, streamlines approvals, and enhances economic vitality in targeted areas. Expertise in local zoning codes, environmental regulations, and community engagement practices will be essential to delivering actionable recommendations and facilitating smoother project pathways. This is a subcontract under the Office of Economic Development for the state of California, classified under NAICS code 541330 for architectural, engineering, and related services. The opportunity was posted on July 31, 2026, with a firm response deadline of September 5, 2026. While specific location details for performance or contact are not provided, the scope implies work centered on urban corridors within California, requiring deep familiarity with state and local regulatory environments. The contract does not specify a set-aside type, indicating it is open to qualified subcontractors without reserved eligibility criteria.

Office of Economic Development

POSTED

DEADLINE

in about 1 month

Investment and Revitalization Strategy for Sacramento County Commercial Corridors

Solicitation # 2026-GEN-0073

Sacramento County is seeking to develop a comprehensive Investment and Revitalization Strategy for its 15 commercial corridors in the unincorporated areas, aiming to address longstanding challenges such as aging infrastructure, underutilized properties, fragmented ownership, and declining private investment. With a population of approximately 1.6 million and a diverse economy anchored by government, healthcare, logistics, education, and emerging sectors like clean technology and life sciences, the County has identified these commercial corridors as vital to economic vitality, community resilience, and long-term fiscal sustainability. Previous planning efforts—including market analyses and strategic reports from 2017 through 2024—have underscored the need for place-based, implementation-focused interventions that integrate housing, retail, public space improvements, and business support to attract private capital and revitalize underperforming districts. This initiative builds on those foundations to create an actionable roadmap that prioritizes opportunities, evaluates barriers, and aligns public resources to maximize impact across varied market conditions. The County is soliciting proposals through solicitation number 2026-GEN-0073, with responses due by September 5, 2026, and the work will be led by the Office of Economic Development based in Sacramento. The selected contractor will be tasked with delivering a practical, data-informed strategy that identifies realistic redevelopment opportunities, outlines prioritized actions for County intervention, and provides a clear framework for leveraging both public and private investment. Emphasis will be placed on strategies that enhance neighborhood-serving businesses, improve the physical environment, expand housing options, and foster equitable economic growth. The project will rely on existing background materials, including market studies and corridor maps, and is designed to ensure that revitalization efforts are tailored to the unique context of each corridor while contributing to broader regional goals. The final strategy must be executable, measurable, and designed to support sustainable fiscal outcomes for the County’s unincorporated communities.

Office of Economic Development

POSTED

DEADLINE

in about 1 month

Fire Alarm System Design & State Fire Marshal ApprovalThe contract involves the design modification or upgrade of existing fire alarm systems within facilities managed by the California Department of Corrections & Rehabilitation, with a primary requirement to secure formal approval from the California State Fire Marshal. This includes preparing and submitting comprehensive technical packages that demonstrate full compliance with applicable state fire codes and safety standards, ensuring all documentation is accurate, complete, and submitted in accordance with regulatory protocols. The work must be executed with precision to meet official approval timelines and technical specifications set forth by the State Fire Marshal’s office. Subcontractors are expected to manage the entire process from initial design adjustments through final certification, with responsibility for all code compliance documentation, submittals, and communications with state authorities. The solicitation is open for responses until September 4, 2026, and is categorized under NAICS code 541330 for engineering services. Performance of the work is expected to occur across various state correctional facilities under the jurisdiction of the California Department of Corrections & Rehabilitation, though specific locations are not detailed in the posting. All contractors must be prepared to demonstrate expertise in fire protection system design and state regulatory processes to qualify.

California Department of Corrections & Rehabilitation

POSTED

DEADLINE

in about 1 month

Fire Alarm Preventative Maintenance & Safety InspectionsThe contract requires the provision of scheduled preventative maintenance and safety inspections for fire alarm systems across all California Department of Corrections & Rehabilitation facilities. Work includes comprehensive testing, diagnostic evaluations, and thorough documentation to ensure system compliance and operational readiness. All services must be completed within 48 hours of receiving notification and are to be performed during normal business hours to minimize disruption to facility operations. The work is governed under NAICS code 541330 and is structured as a subcontract opportunity with a response deadline of September 4, 2026. The contract is administered by the State of California and applies to locations statewide under the jurisdiction of CDCR.

California Department of Corrections & Rehabilitation

POSTED

DEADLINE

in about 1 month

System Start-Up, Commissioning & TestingThe contract pertains to the post-installation commissioning, startup, performance testing, and calibration of the HVAC system to ensure full operational readiness. This work is critical to verifying that all components function as designed, meet specified performance criteria, and are properly calibrated for efficient and reliable operation. The scope requires detailed testing protocols, documentation of results, and adjustments to bring the system into compliance with operational and safety standards prior to handover. This subcontract is issued by the Texas Department of Criminal Justice under NAICS code 541330, which classifies it as architectural and engineering services. The solicitation was posted on July 31, 2026, with a response deadline of August 21, 2026. The place of performance is within Texas, though specific locations are not detailed. The contract is not subject to a set-aside designation, and while no point of contact is listed, the procurement is managed through the Texas SmartBuy portal with the solicitation available via the provided link.

Texas Department of Criminal Justice

POSTED

DEADLINE

Traffic Signal Timing Support and OptimizationThe City of Villa Rica is seeking a subcontractor to provide comprehensive support for traffic signal timing studies aimed at optimizing signal phasing and reducing congestion. This effort involves full-cycle services including field data collection, advanced analysis of traffic patterns, and close coordination with engineering consultants to implement effective timing adjustments. The work is focused on improving traffic flow efficiency through evidence-based modifications to existing signal systems, with an emphasis on real-world performance metrics and regional connectivity. The opportunity is open for submission until August 20, 2026, and falls under NAICS code 541330, indicating it is a professional service engagement in engineering services. The contract type is classified as a subcontract, suggesting the selected vendor will operate under a prime contractor or larger project framework. While specific performance location details are not provided, the work is tied to the City of Villa Rica in Georgia, and all deliverables must align with local transportation goals. The solicitation is accessible via the Georgia Department of Administrative Services portal, and proposers are expected to demonstrate expertise in traffic signal optimization, data-driven analysis, and municipal collaboration.

City of Villa Rica

POSTED

DEADLINE

Project Execution, Phasing, and Coordination Plan DevelopmentThe contract calls for the development and implementation of a detailed plan to phase construction activities in a way that ensures the uninterrupted operation of occupied Department of Public Safety facilities. This requires meticulous scheduling of work to minimize disruption to ongoing critical services, with a strong emphasis on risk management strategies to anticipate and mitigate potential impacts on safety, accessibility, and functionality of secured or high-traffic areas. The contractor must coordinate closely with multiple stakeholders including agency personnel, emergency responders, maintenance staff, and possibly the public to align construction timelines with operational needs and safety protocols. The plan must include comprehensive documentation of work sequencing, buffer zones, temporary relocations, noise and dust controls, emergency access routes, and contingency measures for unexpected delays or hazards. All activities must comply with state and federal regulations governing public facility operations and construction in sensitive environments. The solicitation is classified as a subcontract under NAICS code 541330, indicating specialized professional services in architectural or engineering activities, and responses are due by August 14, 2026, with the opportunity posted on the Texas SmartBuy portal. The work will take place across various DPS facilities within Texas, requiring localized planning and adaptability to site-specific constraints and operational demands.

Department of Public Safety

POSTED

DEADLINE

Small and Disadvantaged Business (CBE/SBE/DBE) Subcontracting OpportunitiesBroward County is offering subcontracting opportunities exclusively for certified Community Business Enterprise, Small Business Enterprise, and Disadvantaged Business Enterprise firms across all trades, as part of its commitment to meeting participation goals for underrepresented businesses. These opportunities are open to firms certified under the county’s programs, ensuring equitable access to contracts tied to county-funded projects. The solicitation is categorized under NAICS code 541330, indicating a focus on architectural and engineering services, although the scope extends to all trades relevant to county work. Participation is not limited to a specific project but aligns with broader county initiatives that prioritize diverse vendor engagement. The posting went live on July 31, 2026, with a response deadline of August 7, 2026, giving interested firms one week to submit their interest or proposals. All interactions and submissions must occur through the designated platform at the provided web link, and firms are expected to meet certification requirements in good standing to qualify. There are no additional set-aside designations beyond the CBE, SBE, and DBE certifications, and the county seeks active participation from certified businesses to fulfill its diversity and inclusion objectives.

POSTED

DEADLINE

More opportunities from Department Of Defense → W7MW Uspfo Activity Arang 189

Same awarding agency

On-Site Mobile Repair and Field Service SupportA mobile repair team will be deployed to perform all corrective and preventative maintenance tasks on-site at Little Rock Air Force Base within a 30-day window to ensure operational readiness and equipment reliability. This subcontract, classified as a Small Business Set Aside with a total set-aside designation, falls under NAICS code 811490 for other personal and household goods repair and maintenance. The opportunity was posted on July 31, 2026, with a response deadline of August 14, 2026, at 3:00 PM. The work is to be conducted exclusively at the designated location with a zip code of 72099, and the contracting activity is under the Department of Defense through the W7MW Uspfo Activity Arang 189 office. All services must be completed within the specified timeframe without disruption to mission-critical operations.

Other Personal and Household Goods Repair and Maintenance

POSTED

DEADLINE

Preventative Maintenance and Lubrication ServicesThe contract titled Preventative Maintenance and Lubrication Services requires the performance of comprehensive preventative maintenance on equipment, specifically focusing on lubrication of all pivot points, joints, and moving components in strict accordance with JLG manufacturer specifications. This work is essential to ensure the operational readiness, safety, and longevity of the machinery involved, and must be executed with precision and adherence to industry best practices as defined by the OEM. The contract is structured as a subcontract under a Small Business Set Aside designation, reserving full competition for small businesses as defined by the SBA. The solicitation was posted on July 31, 2026, with a firm response deadline of August 14, 2026, at 3:00 PM. The North American Industry Classification System code is 811411, indicating the scope falls under repair and maintenance services for industrial machinery and equipment. The place of performance is identified as Little Rock Air Force Base with a zip code of 72099, and the contracting activity falls under the Department of Defense through the W7MW Uspfo Activity Arang 189 office. All work is expected to be performed on-site at the designated military installation to support critical operational equipment maintenance needs.

Home and Garden Equipment Repair and Maintenance

POSTED

DEADLINE

Aerial Lift Hydraulic System Repair and ServicingThe contract entails comprehensive hydraulic system servicing for two JLG 800AJ aerial lifts, requiring full diagnostics, fluid replacement, seal inspection, and repair or replacement of any defective components to ensure optimal operational performance. All work must be performed in accordance with industry best practices and manufacturer specifications, focusing on safety, reliability, and long-term system integrity. The scope is narrowly defined to the hydraulic systems only, with no broader mechanical or electrical repairs included unless directly tied to hydraulic component failure. This is a Small Business Set Aside contract under NAICS code 811490, issued by the Department of Defense through the W7MW Uspfo Activity Arang 189, with performance required at Little Rock Air Force Base, ZIP 72099. The solicitation was posted on July 31, 2026, and responses are due by August 14, 2026, at 3:00 PM. Participation is restricted to qualified small businesses, and the contract type is classified as a subcontract. All work must be executed on-site at the designated location, and contractors are expected to comply with federal and military facility regulations while performing services.

Other Personal and Household Goods Repair and Maintenance

POSTED

DEADLINE

Solicitation # W50S6P26QG001

This contract seeks a small business to fully restore two JLG Model 800AJ aerial lifts to mission-ready condition at Hangar 207, Little Rock Air Force Base, Arkansas. The work includes all necessary parts, labor, tools, equipment, and transportation required to perform comprehensive repairs, annual inspections, and preventative maintenance on both units as defined in the Statement of Work. The contract is a total small business set-aside under NAICS code 811310 with a size standard of $12.5 million, and applicable Service Contract Act wage determinations must be followed. All work must be completed within 30 days of contract award, and vendors are required to submit firm-fixed-price quotes by August 14, 2026, at 10:00 a.m. CDT, with quotes remaining valid through September 30, 2026. Proposals must include detailed capability statements demonstrating understanding of the SOW and ability to meet all technical requirements. Awards will be made to the lowest-priced quote that fully complies with the solicitation. Questions must be submitted by August 6, 2026, to the designated point of contact.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Packing Material and Trash RemovalThis contract involves the removal and disposal of packaging materials and debris resulting from the delivery and installation of furniture. It is classified as a subcontract under NAICS code 562111, which pertains to waste collection services. The contracting agency is the Department of Defense, specifically the W7MW Uspfo Activity Arang 189 office, although specific location details for the place of performance and office address are not provided. Issued on September 17, 2025, the contract requires the contractor to manage all aspects of trash and packing material cleanup efficiently to maintain cleanliness and safety at the delivery sites. No set-aside type or point of contact information is listed, indicating it may be a direct subcontract arrangement. The contract documentation is available for review through the government’s procurement website.

Solid Waste Collection

POSTED

DEADLINE

Furniture Setup and InstallationThis contract involves the assembly and installation of office furniture at designated locations, which includes tasks such as unpacking, configuring the furniture according to provided layouts, and making minor adjustments to ensure proper setup. The scope is focused on efficient and accurate placement of furniture to meet the specified spatial arrangements. The contract, titled "Furniture Setup and Installation," is a subcontract under the Department of Defense, specifically managed by the W7MW Uspfo Activity Arang 189 office. It falls under the NAICS code 238290, which pertains to other building equipment contractors. Although specific details about the place of performance, point of contact, and set-aside status are not provided, the contract was posted on September 17, 2025. The work is integral to facilitating functional office environments within the designated facilities.

Other Building Equipment Contractors

POSTED

DEADLINE

Inside Delivery and Logistics CoordinationThis contract entails the transportation and interior delivery of furniture within buildings at Little Rock Air Force Base. It includes responsibilities such as scheduling deliveries, planning routes, and ensuring compliance with base access and security requirements. The scope emphasizes coordination to support seamless logistics within the base environment, thereby facilitating efficient movement and placement of furniture. The contract is categorized under NAICS code 484220, which relates to specialized freight trucking services. It is a subcontract opportunity posted by the Department of Defense through the W7MW Uspfo Activity Arang 189 agency. While specific details such as solicitation number and contact information are not provided, the contract highlights a critical logistical support function for government facilities, requiring adherence to both operational and security protocols at a military installation.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Office Furniture Supply – Standard ConfigurationsThe contract involves the procurement of pre-designed, standard office furniture, specifically desks, chairs, and filing cabinets, intended to align with the existing furnishings at the 189th AW campus. This effort aims to ensure uniformity and consistency in the office environment by supplying furniture that matches current standards. This subcontract falls under NAICS code 337211, associated with office furniture manufacturing, and is managed by the Department of Defense through the W7MW Uspfo Activity Arang 189. While specific location details and contact information are not provided, the contract posting date is September 17, 2025. The focus is on acquiring standard configuration office furniture to support operational needs at the designated campus.

Wood Office Furniture Manufacturing

POSTED

DEADLINE

OFFICE FURNITURE

Solicitation # PANNGB-25-P-0000-028347

The Arkansas Air National Guard, specifically the 189th Mission Support Contracting office at Little Rock Air Force Base, plans to award a firm-fixed price contract valued at $24,772.30 to Federal Prison Industries for the procurement of office furniture. This is a sole-source award justified under the Federal Acquisition Regulation, allowing solicitation from a single source because only one source is reasonably available for this requirement. The anticipated North American Industry Classification System (NAICS) code applicable to this procurement is 337211, which pertains to office furniture manufacturing. Delivery is expected within 120 days after receipt of the order, with shipment directed to Little Rock AFB. This contracting action is below the Simplified Acquisition Threshold, which allows for streamlined acquisition procedures. The notice serves as an official dissemination of the procurement intent but is not a solicitation for quotations or proposals; unsolicited responses will not be considered. Interested parties are invited to provide compelling evidence that competition would benefit the government; however, the decision to conduct a competitive process remains at the government’s discretion. The contracting office point of contact for this action is TSgt Ryan J. Bernaiche.

Wood Office Furniture Manufacturing

POSTED

DEADLINE