Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aerospace Casting and Forging for Structural Fittings

Open

Federal

Response Deadline11/17/2026, 11:00:00 AM CST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity is for the production of raw cast or forged metal blanks intended for structural fittings on DLA Weapons Support ASC projects. The selected provider must manufacture these blanks in strict accordance with the geometry and material specifications outlined in Drawing 20145214 and associated Technical Data Packages, delivering components that are ready for final machining. Performance will take place at Tinker AFB, and the contractor is required to possess industrial casting or forging facilities. Additionally, NADCAP approval is mandatory for all relevant special processes. Interested parties must respond by November 17, 2026, under NAICS code 332111 for the Department of Defense.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

332111 - Iron and Steel Forging

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-27-T-3560.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FITTING, STRUCTURAL COM

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 9

subcontract

Response DeadlineNov 17

Submission deadline

Response Deadline

11/17/2026, 11:00:00 AM CSTin 6 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies raw cast or forged blanks for prime contractors on DLA Weapons Support ASC projects. Casts or forges metal blanks according to geometry and material specifications in Drawing 20145214 and associated TDPs. Requires industrial casting/forging facilities and NADCAP approval for relevant special processes. Delivers cast or forged blanks ready for final machining.

Similar Contracts

Same NAICS industry code

Forged and Cast Hardware Fabrication for Cargo Net SlingsThis subcontract opportunity involves the casting and forging of high-strength metal links to support prime contractors on DLA Troop Support cargo net projects. The scope of work includes the fabrication of forged or welded links according to NSN 3940-01-600-1309, with a requirement to provide both galvanized and non-galvanized finishes for First Article Testing. The final deliverables consist of forged metal hardware components produced under NAICS code 332111. The project is designated as a Total Small Business Set-Aside under FAR 19.5 and is managed by the Department of Defense. To be eligible, contractors must possess JCP Certification for technical data access and maintain CMMC Level 2 compliance. Performance will take place in New Cumberland, Pennsylvania, with a response deadline set for November 17, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 13 hours ago

DEADLINE

Supply of 4340 Alloy Steel Bar StockThis subcontract involves the supply of certified 4340 alloy steel bar stock to prime contractors supporting DLA land vehicle projects. The raw materials must strictly adhere to MIL-S-5000 specifications, serving as an approved alternative to casting. To ensure quality and compliance, the provider is required to furnish certified test reports from the manufacturer for all delivered materials. The contract is managed by the Department of Defense under the DLA Weapons Support Land Supplier Operations Vehicle Support agency. Performance will take place in New Cumberland, Pennsylvania. Due to the nature of the materials and their application in defense projects, the supplier must maintain full ITAR and EAR compliance.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 13 hours ago

DEADLINE

Aerospace Fastener Blank Casting and ForgingThis subcontract for the Department of Defense ASC Commodities Division involves the casting or forging of aerospace-grade alloy metal blanks into near-net shapes according to Drawing 81205 BACB30YP. The project requires the use of precision casting facilities or industrial forging presses to produce components for prime contractors. All delivered blanks must be accompanied by full material certifications. Eligible providers must hold CMMC Level 2 compliance and US/Canada Joint Certification Program certification. The work is associated with NAICS code 332111 and is designated for performance in Jacksonville, Florida. Interested parties must adhere to the response deadline of November 13, 2026.

ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

ANGLE, STRUCTURAL

Solicitation # SPE8E4-27-T-0293

Solicitation SPE8E4-27-T-0293 is for the procurement of 697 feet of structural angles made of Grade A, hot rolled steel. The material must be produced by an approved steel mill and meet specific physical dimensions: 3.000 inches in overall height and width, with a left side/base flange thickness of 0.188 inches and a reference weight of 3.71 lb/ft. The steel must comply with ASTM-A6 Table A2.7 for equal leg L-shapes and the American Bureau of Shipping (ABS) Rules for Building and Classing Steel Vessels, Part 2, Section 1, including Appendix 2/D. Material acceptance is contingent upon an ABS Surveyor's endorsement on certificates and the provision of a Certificate of Quality Compliance with every shipment. The contract mandates strict marking and packaging requirements, including continuous identification markings such as the DLA contract delivery order number, NSN, and manufacturer's details. Material manufactured to MIL-S-22698 must specifically include the letters AB. Packaging and preservation must adhere to ASTM A700 and MIL-STD-129, with delivery scheduled for February 2027 to the DDSP New Cumberland Facility in Pennsylvania. Eligibility for award is restricted to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). Additionally, the contractor must comply with cybersecurity requirements, including CMMC Level 2 self-assessment and DFARS 252.204-7012 for safeguarding covered defense information.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 13 hours ago

DEADLINE

ANGLE, STRUCTURAL

Solicitation # SPE8E4-27-T-0296

Solicitation SPE8E4-27-T-0296 is a fixed-price procurement for 892 feet of extruded steel structural angles (NSN 9520-00-277-4936). The required material consists of equal-leg L-shapes with a 2.000 inch overall height, 2.000 inch overall width, and 0.250 inch base flange thickness, with lengths ranging from 20 to 30 feet and a reference weight of 3.3 lb/ft. The steel must be zinc-coated in accordance with ASTM A123 and meet ASTM A36 and ASTM A6/A6M standards. This procurement is designated as a Small Business Set-Aside and includes a price evaluation preference for HUBZone Small Business Concerns. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). The contract mandates rigorous marking and packaging requirements, including continuous identification markings via stamping or stenciling and compliance with MIL-STD-2073-1E and ASTM A700. A Certificate of Quality Compliance is required for every shipment. Delivery is set for 72 days after order, with FOB Origin terms and destination inspection. The contractor must adhere to various cybersecurity and regulatory requirements, including CMMC Level 2 self-assessment and DFARS safeguarding of covered defense information.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 13 hours ago

DEADLINE

Casting and Forging for Four Legged Chamber (NSN 4540-01-513-8154)This subcontract, issued by the Department of Defense for the DDSP New Cumberland Facility, involves industrial casting or forging services for the Four Legged Chamber, identified by NSN 4540-01-513-8154. The selected contractor will be responsible for creating the necessary molds or dies and executing production runs to deliver rough-cast or forged chamber blanks. All work must adhere to the specific technical and quality requirements set by the DLA, and the contractor is expected to provide all specialized tooling required for production. The opportunity is designated as a total Small Business Set Aside under NAICS code 332111. It was posted on November 10, 2026, with a response deadline of November 20, 2026. This contract is intended for firms capable of performing high-precision structural forming to support prime contractors on DLA supply contracts.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

Aluminum Bronze Welding Rods (MIL-CUAL-A2)This small business set-aside subcontract involves the manufacture and supply of bare, solid copper aluminum alloy cut length welding rods for prime contractors supporting DLA Maritime - Puget Sound. The rods must be produced with a 3/32 inch diameter and 36 inch length in accordance with MIL-CUAL-A2, FORM 6, and UNS C61800 specifications. All products must feature markings compliant with MIL-STD-792, MIL-STD-130, and MIL-STD-129, and the delivery of 20 lbs of rods must include material certification test reports. The performing contractor is required to maintain ISO 9000 certification and possess a quality manual meeting MIL-I-45208 or ISO 9001:2008 standards. Performance for this Department of Defense requirement will take place in Bremerton, Washington. The solicitation was posted on November 10, 2026, with a response deadline of November 13, 2026, under NAICS code 332111.

DLA Maritime - Puget Sound

POSTED

about 18 hours ago

DEADLINE

Aerospace Alloy SupplyThis subcontract, titled Aerospace Alloy Supply, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The contract involves the sourcing and delivery of certified aerospace-grade metal stock and billets specifically required for forging airfoil ribs according to Drawing 81205. Performance for this project will take place at Tinker AFB. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332111. To be eligible, providers must hold ISO 9001:2015 and JCP certifications to handle ITAR restricted material specifications. All delivered raw materials must be accompanied by official mill certifications. The response deadline for this solicitation is November 17, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Certified Raw Materials for Valve BodiesThis subcontract involves the supply of certified raw metal stock, such as castings, forgings, or billets, specifically for valve bodies used in DLA Weapons Support Maritime Hardware projects. The materials must strictly adhere to the technical specifications of NSN 4820-00-026-3258 and be delivered with mill test reports and certificates of conformance. The contract is managed under the Department of Defense and requires strict compliance with the Buy American Act and the Berry Amendment to ensure domestic origin. Performance will take place in Cherry Point, and the procurement falls under NAICS code 332111.

CHERRY POINT PHANTOM RD BLDG

POSTED

DEADLINE

Supply of Titanium Alloy 6AL-4V (160 KSI FTU)This subcontract involves the procurement of raw Titanium Alloy 6AL-4V stock to support prime contractors working on DLA Weapons Support Aviation Supply Chain projects for the Department of Defense. The material must be sourced and milled to strict aerospace specifications, specifically requiring a minimum heat treatment of 160 KSI FTU. To ensure quality and regulatory adherence, the provider must maintain full ITAR and EAR compliance. Additionally, all deliveries must be accompanied by material test reports that meet the rigorous standards of the DLA aviation supply chain.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Forged Steel Gearshaft Blank Supplier

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Aerospace-Grade Raw Material SupplyThis subcontract, titled Aerospace-Grade Raw Material Supply, involves the provision of raw metal stock to prime contractors working on DLA Weapons Support ASC projects. The materials are specifically intended for the manufacture of critical application shims and must strictly adhere to the chemical and physical properties outlined in Basic Drawing 73030 732005. To maintain the rigorous traceability required for critical aerospace components, the supplier is required to provide full material certifications and Mill Test Reports. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract falls under NAICS code 332111. The place of performance is located in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 17, 2026, for this procurement of certified raw material stock.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

MIL-SPEC Packaging and Shipping ServicesThis subcontract for MIL-SPEC Packaging and Shipping Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves providing specialized packaging and final delivery preparation for 13 units, ensuring all items are packaged and labeled for FOB Origin shipment. Performance takes place in New Cumberland, Pennsylvania, under NAICS code 488510 for the Department of Defense. Technical requirements mandate strict adherence to RP001, MIL-STD-129, and MIL-STD-2073-1E standards. The contractor must utilize MIL-SPEC packaging materials and labeling equipment, specifically employing preservation method 33 and wrap material GB. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

Freight Transportation Arrangement

POSTED

about 13 hours ago

DEADLINE

Special Shaped Spacer ManufacturingThis subcontract involves the manufacture of 13 Special Shaped Spacers, identified by NSN 5365-01-675-9007, for prime contractors supporting DLA Weapons Support ASC projects. The work requires precision machining in strict accordance with Basic Drawing NR 53711 7124771, Revision B, and explicitly prohibits the use of additive manufacturing. The final deliverable consists of 13 finished and inspected spacers. To be eligible, the provider must maintain SAE AS9003 or ISO 9001 quality systems, CMMC Level 2 compliance, and certification under the US/Canada Joint Certification Program. The project falls under NAICS code 332710 and is managed by the Department of Defense. Performance of the contract is located in New Cumberland, Pennsylvania.

POSTED

about 13 hours ago

DEADLINE

Aerospace Component Packaging & LogisticsThis subcontract for Aerospace Component Packaging and Logistics supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves the secure packaging of Pan Assemblies in accordance with ASTM D3951 and palletization per RP001. All shipments must be marked and labeled according to MIL-STD-129 and delivered to Fleet Readiness Center East in Cherry Point using the fastest traceable shipping methods available. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, falling under NAICS code 488510. Interested parties should note the response deadline of November 17, 2026.

Freight Transportation Arrangement

POSTED

about 13 hours ago

DEADLINE

Aerospace Quality Assurance & TestingThis subcontract for Aerospace Quality Assurance and Testing supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves performing independent inspection and verification, specifically executing origin inspection and acceptance in accordance with FAR 52.246-2. The contractor is responsible for verifying critical and major attributes using NIST-calibrated measurement and test equipment per RT001, employing sampling methods aligned with MIL-STD-1916 or ASQ H1331. Final deliverables include detailed inspection reports and Certificates of Conformance. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located in Cherry Point. The opportunity is categorized under NAICS code 541380. Interested parties should note the response deadline of November 17, 2026.

Testing Laboratories and Services

POSTED

about 13 hours ago

DEADLINE

Pan Assembly Fabrication (P/N 78500-02071-043)This subcontract involves the fabrication of two Pan Assembly units, part number 78500-02071-043, for prime contractors supporting the DLA Weapons Support ASC. The project requires precision CNC machining and assembly using aerospace-grade materials, strictly adhering to technical specifications provided by Sikorsky Aircraft Corporation. Quality assurance is a critical component of the contract, requiring the implementation of sampling plans per MIL-STD-1916 or ASQ H1331 to verify critical attributes with an AQL of 0.1. The work is associated with NAICS code 336413 and will be performed in Cherry Point, North Carolina, for the Department of Defense.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

Precision Manufacturing of Aircraft Fairings (NSN 1560-01-339-9721)This subcontract involves the precision manufacturing of 18 aircraft fairings under NSN 1560-01-339-9721 for the Department of Defense, specifically the DLA Weapons Support ASC. The contractor is responsible for fabricating parts according to Boeing Restricted Technical Data Package and Reference Drawing NR 81205 using BAC specifications, with attribute verification performed per MIL-STD-1916 or ASQ H1331. Performance will take place at Tinker AFB. To be eligible, the provider must maintain JCP certification, ITAR/EAR approval, and a quality system certified to SAE AS9003 or ISO 9001 standards. The scope of work includes the complete fabrication, packaging, and delivery of the finished fairings. The response deadline for this opportunity is November 17, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing supports the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Division. The project involves performing specialized surface treatments and coatings on aircraft structural components to ensure essential corrosion resistance. All work must be executed in strict accordance with reference drawings BAC5300 and BAC5307, with final delivery consisting of finished plates featuring aerospace-grade treatments. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813, with performance taking place at Tinker AFB. To be eligible, contractors must maintain NADCAP accreditation and ISO 9001:2015 certification. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 13 hours ago

DEADLINE

Supply of Aerospace Grade Raw Material for Structural PlatesThis subcontract involves the supply of aerospace grade raw material billets or sheets for prime contractors working on DLA Weapons Support ASC projects. The selected provider must source materials that strictly adhere to the alloy and temper requirements specified in Drawing 81205 39-10779 and ensure full material traceability through the provision of Mill Test Reports. All materials must be delivered directly to the fabrication facility and comply with the Buy American Act. The opportunity is a total small business set-aside under NAICS code 331315 for the Department of Defense. Performance will take place at Tinker AFB, and the response deadline for this requirement is November 17, 2026.

Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

about 13 hours ago

DEADLINE

Manufacture of Structural Aircraft Plates (P/N 39-10779-34)This subcontract involves the precision machining and fabrication of 296 structural aircraft plates, part number 39-10779-34, for prime contractors supporting DLA Weapons Support ASC projects. The work must be performed using CNC machining in strict accordance with Basic Drawing NR 81205 39-10779 Revision E and TDP Revision C Gen 4. The final deliverable consists of 296 inspected and accepted plates, with quality control requiring the implementation of zero-based sampling per H1331. The project is a total small business set-aside under NAICS code 336413, with performance located at Tinker AFB. To be eligible, contractors must maintain CMMC Level 2, ISO 9001:2015, and ITAR/EAR compliance. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

Aerospace Grade Material SupplyThis subcontract, titled Aerospace Grade Material Supply, involves the provision of raw aerospace-grade metal stock for prime contractors supporting DLA Weapons Support ASC projects. The scope of work specifically requires the delivery of certified raw material stock for part number 35-13212-14, as detailed in Drawing 81205 35-13212. To ensure compliance with Department of Defense standards, the supplier must provide full traceability through material certifications and Mill Test Reports. The contract is managed by the DLA Weapons Support ASC Supplier OE and AF Div under NAICS code 331210, with the place of performance located at Tinker AFB. The solicitation was posted on November 10, 2026, with a response deadline set for November 17, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 13 hours ago

DEADLINE

NADCAP Approved Special Process FinishingThis subcontract, titled NADCAP Approved Special Process Finishing, involves performing specialized processing for prime contractors on DLA Weapons Support ASC projects. The scope of work includes heat treating, plating, anodizing, or non-destructive testing on aircraft channels in accordance with Drawing 20145214. All processed components must be delivered with the required certifications of compliance. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Tinker AFB. To be eligible, contractors must hold NADCAP approval for the specific process being performed and obtain ITAR/EAR data access approval. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 13 hours ago

DEADLINE

Aircraft Channel Fabrication and MachiningThis subcontract involves the fabrication and machining of 46 aircraft channels, part number 35-13212-14, for the Department of Defense under the DLA Weapons Support ASC. Production must strictly adhere to Reference Drawing NR 81205 35-13212 Revision B and TDP Rev B Gen 5. The manufacturing process requires the use of CNC machining and precision M&TE per RT001, while the use of additive manufacturing is explicitly prohibited. The selected contractor must maintain several critical certifications, including JCP certification, ISO 9001:2015, CMMC Level 2, and NIST SP 800-171. Performance will take place at Tinker AFB, and the final deliverable consists of 46 finished and inspected aircraft channels. The response deadline for this opportunity is November 17, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

NUT, SELF-LOCKING, ROUND

Solicitation # SPE4A6-27-T-036A

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

ANGLE, STRUCTURAL

Solicitation # SPE8E4-27-T-0286

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0289

Defense Logistics Agency

POSTED

DEADLINE

Specialized Shipboard Material Supplier

DLA Maritime - Portsmouth

POSTED

DEADLINE

Solicitation # W911S227U0137

W6QM Micc-Ft Drum

POSTED

DEADLINE

Casting/Forging for Fuel Injector Components

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Raw Blank Casting and Forging for Gearshaft

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Sediment Strainer Elements

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Specialty Metal Stock Supply

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Metal Tube Assembly Production and Supply

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Bearing Blank Casting/Forging

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS