Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Aerospace Component Finishing (F-2A30)

Active

Federal

Response Deadline09/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Aerospace Component Finishing (F-2A30) involves providing specialized surface treatment and finishing for machined airframe components, specifically coated flap hinge components, for prime contractors on SMSG Aviation Supply Chain projects. The work must be performed in accordance with the technical data package and Boeing specifications, utilizing industrial coating and plating equipment that meets military aerospace standards. The project is managed by the Department of Defense under the SMSG AVIATION SUP CH CORPORATE LTC and is to be performed at Tinker AFB. Compliance with ISO 9001:2015 and 29 CFR 1910.1200 hazardous material labeling is required. The solicitation was posted on September 23, 2026, with a response deadline of September 30, 2026, falling under NAICS code 332813.

General Info

Subcontract for aerospace component finishing and surface treatment at Tinker AFB for SMSG.

Agency

Department Of Defense → SMSG AVIATION SUP CH CORPORATE LTC

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4AX-26-T-0112.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FLAP HINGE, AIRFRAME

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 23

subcontract

Response DeadlineSep 30

Submission deadline

Response Deadline

09/30/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → SMSG AVIATION SUP CH CORPORATE LTC

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → SMSG AVIATION SUP CH CORPORATE LTC

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized surface treatment and finishing for prime contractors on SMSG Aviation Supply Chain projects. Applies finish code F-2A30 to machined airframe components in accordance with the technical data package and Boeing specifications. Utilizes industrial coating and plating equipment meeting military aerospace standards. Requires ISO 9001:2015 and 29 CFR 1910.1200 hazardous material labeling. Delivers coated flap hinge components.

Similar Contracts

Same NAICS industry code

Cadmium Plating for Carbon Steel Hardware

FLUID HANDLING DIVISION

POSTED

about 11 hours ago

DEADLINE

NADCAP Special Process Services (Heat Treat/Plating/NDT)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

Specialized Coating and Finishing Services

FLUID HANDLING DIVISION

POSTED

about 11 hours ago

DEADLINE

Specialized Coating for Critical Gun PartsThis subcontract, issued by the Department of Defense Land Supply Chain, involves the application of specialized protective or functional coatings to cylinder caps for critical gun part projects. The work requires the use of industrial coating equipment for anodizing, plating, or chemical film application in accordance with the technical data package for NSN 1095009553203. The project is set aside for Women-Owned Small Businesses and will be performed at Hill AFB. The contractor is responsible for delivering 769 coated cylinder caps and one assembled coating exhibit for First Article Testing. Strict adherence to security and regulatory standards is mandatory, specifically requiring CMMC Level 2 and DFARS 252.204-7012 compliance. The response deadline for this opportunity is October 5, 2026.

LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Anodizing Services for Aluminum Restrictor UnitsThis subcontract for the Department of Defense Fluid Handling Division involves providing specialized surface treatment services for aluminum alloy fluid flow restrictor units. The contractor is responsible for utilizing anodizing tanks and chemical baths to ensure corrosion resistance and durability, strictly adhering to aerospace and military standards such as MIL-A-8625. The final deliverable consists of anodized aluminum restrictor bodies intended for prime contractors fulfilling DLA supply contracts. The project is categorized under NAICS code 332813 and will be performed in New Cumberland, Pennsylvania. The solicitation was posted on September 23, 2026, with a response deadline of October 5, 2026.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Hard Chrome Plating Services for Valve ComponentsThis subcontract involves the provision of hard chrome plating services for stainless steel ported valve balls to support prime contractors on DLA Land and Maritime hardware contracts. The selected provider will utilize industrial electroplating equipment to apply plating to the exterior of six valve balls, ensuring that thickness and uniformity strictly adhere to TDP Rev A Gen 2 specifications. The project is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. Under NAICS code 332813, the opportunity was posted on September 23, 2026, with a response deadline of October 5, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Industrial Wear Coating ApplicationThis subcontract for Industrial Wear Coating Application is issued by the Department of Defense through DLA DIST SAN JOAQUIN. The contractor is responsible for performing wear-coating processes on valve components for prime contractors on DLA supply contracts, specifically for NSN 4820015502915. The scope of work involves applying wear-resistant coatings using thermal spray, plating, or specialized chemical coatings within application chambers and plating baths, ensuring all thickness and adhesion standards meet the technical data package. The opportunity is a Total Small Business Set-Aside under NAICS code 332813, with the place of performance located in Tracy, California. The solicitation was posted on September 23, 2026, and the response deadline is October 5, 2026.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Industrial Coating and Finishing ServicesThis subcontract for Industrial Coating and Finishing Services involves providing surface treatments, plating, and coating for prime contractors on DLA supply contracts. The primary objective is to prevent corrosion and meet specific wear requirements through the use of industrial plating tanks, powder coating equipment, and chemical treatment baths to deliver finished cylinder assemblies. The work is managed under the Department of Defense for the Land Supplier Opns Vehicle Spt agency. All processes must strictly adhere to DFARS 252.223-7008, ensuring the absence of Hexavalent Chromium and Class I Ozone Depleting Chemicals. The performance of these services is located at FPO 09523, with a response deadline of October 5, 2026.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Military Grade Surface Treatment and FinishingThis subcontract for Military Grade Surface Treatment and Finishing involves providing protective coating and finishing services for prime contractors under Defense Logistics Agency supply contracts. The scope of work includes applying chemical conversion coatings, powder coating, and anodizing to cradle assembly components according to NSN 1030-01-697-2453 specifications. All processes must adhere to MIL-SPEC finishing standards using industrial spray booths, anodizing tanks, and chemical treatment baths to deliver finished metal components. The project is categorized under NAICS code 332813 and will be performed in Fallon, Nevada. Interested parties must respond by October 5, 2026, following the posting date of September 23, 2026. This effort is managed by the Department of Defense through the Defense Logistics Agency.

Defense Logistics Agency

POSTED

DEADLINE

Specialized Coating ServicesThe Specialized Coating Services subcontract, issued by the LSO Combat Vehicles and Armament under the Department of Defense, involves the application of protective and functional coatings to spur gears for prime contractors fulfilling DLA supply contracts. The scope of work includes surface preparation and the application of specified coatings utilizing plating equipment, spray systems, or industrial coating tanks. All deliverables must strictly adhere to Government First Article Test coating specifications. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813. The place of performance is located at Hill AFB, Utah. Interested parties must submit their responses by the deadline of October 5, 2026.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Tooling Heat Treatment and Surface CoatingThis subcontract for Tooling Heat Treatment and Surface Coating supports prime contractors under the Defense Logistics Agency. The scope of work involves performing specialized heat treatment and industrial coating processes, including hardening, tempering, nitriding, and PVD/CVD coatings such as TiN and TiAlN. These services are executed using industrial furnaces and vacuum chambers to enhance the wear resistance of treated arbors. All operations must strictly adhere to the DLA Master List of Technical and Quality Requirements. The performance of this contract is located in Virginia Beach, Virginia, under NAICS code 332813. The response deadline for this opportunity is October 5, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Aircraft Door Surface Treatment and PaintingThis subcontract for the Department of Defense, specifically Ok DLA Aviation At Oklahoma City, involves the surface preparation, priming, and final painting of aircraft door assemblies. The scope of work includes applying chemical conversion coatings such as Alodine, primers, and aerospace-grade topcoats within industrial spray booths to ensure high levels of corrosion resistance. To qualify for this project, the contractor must maintain NADCAP accreditation for chemical processing and coating. The solicitation was posted on September 23, 2026, with a response deadline of October 24, 2026, under NAICS code 332813.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

More opportunities from Department Of Defense → SMSG AVIATION SUP CH CORPORATE LTC

Same awarding agency

Third-Party Aerospace Inspection and SamplingThis subcontract for Third-Party Aerospace Inspection and Sampling supports SMSG Aviation Supply Chain projects at Tinker AFB. The selected provider will perform origin inspection and sampling for prime contractors, utilizing MIL-STD-1916 or ASQ H1331 Table 1 standards to verify critical, major, and minor attributes across specific AQLs. Additionally, the contractor must ensure part marking compliance with MIL-STD-130 and provide detailed inspection reports and certifications of conformance. Technical requirements include the use of NIST-calibrated equipment such as CMMs, calipers, and micrometers. The provider must demonstrate familiarity with FAR 52.246-2 and maintain ISO 9001:2015 certification. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense through SMSG Aviation Supply Chain Corporate LTC.

Testing Laboratories and Services

POSTED

DEADLINE

Manufacture of Airframe Flap HingesThis subcontract involves the manufacture of ten precision airframe flap hinges for prime contractors under SMSG Aviation Supply Chain projects. The fabrication must adhere to Basic Drawing NR 81205 6-83673 Revision C, as well as reference drawings BAC5423, BAC5435, and ST932. The parts are to be delivered without pilot or bolt holes, utilizing materials that comply with SAE AMS 4045 and surface finishes meeting ASME B46.1 standards. The project requires strict adherence to ISO 9001:2015 quality standards and compliance with the Buy American Act. Performance of the contract is located at Tinker AFB. The solicitation was posted on September 23, 2026, with a response deadline of September 30, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

FLAP HINGE, AIRFRAME

Solicitation # SPE4AX-26-T-0112

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Supply of Halon Fire Extinguishant (NSN 6830-01-321-6527)This subcontract involves the supply of Halon fire extinguishant under NSN 6830-01-321-6527 for prime contractors supporting DLA Aviation supply contracts. The selected provider is responsible for sourcing the gas, providing all necessary traceability documentation, and managing packaging and shipping under F.O.B. Destination terms. To be eligible, the provider must maintain approved source status through Kidde-Fenwal, LLC or Kidde Technologies Inc. The contract falls under NAICS code 325120 and is managed by the Department of Defense through the SMSG Aviation Supply Chain Corporate LTC.

Industrial Gas Manufacturing

POSTED

DEADLINE

Supply of Halon Fire Extinguishant (NSN 6830-01-160-9653)This subcontract involves the supply of Halon fire extinguishant under NSN 6830-01-160-9653 for prime contractors supporting DLA Aviation. The selected provider must be an approved source via Kidde-Fenwal, LLC or Kidde Technologies Inc. and is responsible for providing all necessary traceability documentation to ensure technical acceptability. The contract requires the delivery of 420 units for the base period, with additional option quantities available. All packaging and shipping must be managed according to F.O.B. Destination terms. The opportunity is associated with NAICS code 325120 and is managed by the Department of Defense.

Industrial Gas Manufacturing

POSTED

DEADLINE

HALON, FIRE EXT

Solicitation # SPE4AX-26-R-0041

The Defense Logistics Agency (DLA) plans to award an Indefinite Delivery Contract with one base year and four optional years to support the procurement of critical fire-suppression components tied to NIINs 012545030, 011609653, and 013216527. This acquisition will proceed as Other Than Full and Open Competition due to the specialized nature of the requirements and the limited number of qualified entities. The Government will furnish all halon material directly to the awarded contractor, who must be capable of receiving, storing, processing, and certifying the halon for use in fire-suppression systems. Deliveries will be FOB Origin with Inspection and Acceptance conducted at the point of origin, ensuring timely and standardized readiness support across multiple Department of Defense platforms where no certified drop-in replacements are available. The contract award will be determined based on a combination of price, past performance, and other evaluation criteria outlined in the solicitation. Only three approved sources are recognized for these NIINs, all involving KIDDE-FENWAL, LLC or KIDDE TECHNOLOGIES INC in coordination with Marine Corps Systems Command or Naval Sea Systems Command. The solicitation, designated SPE4AX26R0041, will be issued around August 30, 2026, and is exclusively accessible through the DLA Internet Bid Board System (DIBBS); no paper copies will be provided. Responses are due by August 11, 2026, and the primary point of contact for inquiries is Darold Taylor of DLA Aviation in Richmond, Virginia. The North American Industry Classification System code for this procurement is 325120, indicating it relates to chemical manufacturing.

Industrial Gas Manufacturing

POSTED

DEADLINE

Supply of Miscellaneous Aviation Components (32 Additional NSNs)This subcontract involves the supply of 32 distinct aviation-grade components for prime contractors supporting Department of Defense projects through the DLA Aviation Supply Chain Corporate LTC. The contractor is responsible for sourcing, inspecting, and delivering these specific National Stock Numbers in strict accordance with the established Quality Matrix and Procurement Item Descriptions. All deliverables must meet domestic end product certification requirements and adhere to the packaging and marking standards specified in the Statement of Work. Quantities for these components are governed by the Schedule B Pricing Workbook. The solicitation was posted on August 19, 2026, with a response deadline of October 16, 2026, under NAICS code 423840.

Industrial Supplies Merchant Wholesalers

POSTED

about 1 month ago

DEADLINE

Manufacturing and Supply of Holder Assembly, Electrical Contact BrushThis subcontract involves the manufacture and supply of electrical contact brush holder assemblies, identified by NSN 5977-01-106-2173, for prime contractors supporting DLA Aviation projects under the Department of Defense. The contractor is responsible for producing assemblies that adhere to strict military aviation specifications and ensuring all items are packaged according to ASTM D3951 standards. Additionally, the provider must supply domestic end product certification and maintain the capacity to meet both surge and sustainment requirements. The scope of work includes the delivery of 150,000 units for the base period, with additional option quantities available. This opportunity falls under NAICS code 335311 and is managed by the SMSG Aviation Supply Chain Corporate LTC. Interested parties must respond by the deadline of October 16, 2026.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 1 month ago

DEADLINE

HOLDER ASSEMBLY, ELECTRICAL CONTACT BRUSH

Solicitation # SPE4AX-26-R-0010

Solicitation SPE4AX-26-R-0010 is a sealed bid invitation for a long-term, firm fixed-price requirements contract issued by DLA Aviation to support military service managed spare parts. The procurement is intended as a sole-source award to the Moog, Inc. manufacturing facility in Blacksburg, Virginia. The total period of performance is ten years, divided into a five-year base period and a five-year option period. The initial award identifies a population of 33 NSNs, specifically highlighting the procurement of 150,000 units of Holder Assembly, Electrical Contact Brush (NSN 5977-01-106-2173) with a delivery lead time of 90 days. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 for palletization, with the DLA Master List of Technical and Quality Requirements taking precedence. Higher-level quality requirements are enforced via FAR 52.246-11. Inspection and acceptance will occur at the source (origin). Administrative requirements include the use of the Wide Area Workflow (WAWF) system for electronic invoicing and payment. Proposals must include a completed pricing workbook, a capability assessment plan, and a small business subcontracting plan. Award will be based on the lowest offered unit prices for the specified quantity increments.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 1 month ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS