Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aerospace Component Finishing, Inspection, and Certification

Open

Federal

Response Deadline11/17/2026, 11:00:00 AM CST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division, involves providing specialized surface treatments and quality certification for Boeing P/N 39-21317-3 fittings. The scope of work includes applying aerospace-grade finishes, executing bare item marking according to RQ017, and performing final inspections of critical attributes based on Verification Levels VII, IV, and II. The contractor is responsible for ensuring all components meet MIL-STD-105 quality certification standards and delivering the finished parts along with detailed inspection reports. Performance for this project will take place at Tinker AFB, with a response deadline set for November 17, 2026.

General Info

DoD subcontract for Boeing fitting surface treatments and quality certification at Tinker AFB.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-032E.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FITTING, STRUCTURAL COM

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 9

subcontract

Response DeadlineNov 17

Submission deadline

Response Deadline

11/17/2026, 11:00:00 AM CSTin 6 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs surface treatments and quality certification for prime contractors on DLA Weapons Support ASC projects. Applies aerospace-grade finishes to Boeing P/N 39-21317-3 fittings and conducts final inspection of critical attributes per Verification Levels VII, IV, and II. Executes bare item marking per RQ017 and quality certification per MIL-STD-105. Delivers finished, certified components with inspection reports.

Similar Contracts

Same NAICS industry code

CAD Plating Services for Steel HardwareThis subcontract involves providing specialized CAD plating services for steel hardware to support prime contractors on DLA Weapons Support ASC projects. The scope of work includes surface preparation, cleaning, and the application of clear anodic or chemical plating to steel stepped studs to ensure necessary corrosion resistance. The contractor must utilize appropriate chemical plating baths and curing equipment while strictly adhering to prohibitions regarding hexavalent chromium and maintaining compliance with RQ006 quality conformance standards. The project requires the delivery of four CAD-plated stepped steel studs under NAICS code 332813. This requirement is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division. Interested parties should note the response deadline of November 17, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

Phosphate Coating and Surface TreatmentThis subcontract involves providing specialized phosphate coating and surface treatment services for prime contractors supporting the DLA Weapons Support Land Supply Chain. The selected provider is responsible for the surface preparation and application of phosphate coatings for 54 mounting plates, ensuring all work adheres to the DLA Master List of Technical and Quality Requirements. To qualify, the contractor must possess specific phosphate coating certifications and maintain the necessary treatment tanks. Additionally, strict compliance with prohibitions regarding ozone-depleting chemicals is required. The performance of this contract will take place in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing supports the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Division. The project involves performing specialized surface treatments and coatings on aircraft structural components to ensure essential corrosion resistance. All work must be executed in strict accordance with reference drawings BAC5300 and BAC5307, with final delivery consisting of finished plates featuring aerospace-grade treatments. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813, with performance taking place at Tinker AFB. To be eligible, contractors must maintain NADCAP accreditation and ISO 9001:2015 certification. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

Precision Plating and Surface TreatmentThis subcontract for Precision Plating and Surface Treatment supports the DLA Weapons Support Land Supply Chain through the delivery of surface-treated Feed Trays. The selected provider will perform plating and surface treatments in accordance with ASTM-B633 and TDP specifications, with a strict requirement that no Class I Ozone Depleting Chemicals are used during the process. Performance of the work will take place in New Cumberland. To be eligible, contractors must maintain ITAR and EAR registrations and achieve CMMC Level 2 certification to ensure the secure handling of technical data. The solicitation was posted on November 10, 2026, with a response deadline of November 20, 2026. This opportunity falls under NAICS code 332813 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

NADCAP Approved Special Process FinishingThis subcontract, titled NADCAP Approved Special Process Finishing, involves performing specialized processing for prime contractors on DLA Weapons Support ASC projects. The scope of work includes heat treating, plating, anodizing, or non-destructive testing on aircraft channels in accordance with Drawing 20145214. All processed components must be delivered with the required certifications of compliance. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Tinker AFB. To be eligible, contractors must hold NADCAP approval for the specific process being performed and obtain ITAR/EAR data access approval. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

Aerospace Component Finishing and Plating

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

Aerospace Component Finishing and CoatingThis subcontract for Aerospace Component Finishing and Coating supports the DLA Weapons Support Maritime Supply Chain by providing specialized surface treatments and coatings for prime contractors. The selected provider must apply finishes in strict accordance with TDP Rev A Gen 2 and associated reference drawings, ensuring that all coatings maintain critical tolerances and preserve the integrity of IUID markings. The contractor is required to hold ISO 9001:2015 certification and must manage all hazardous materials according to 29 CFR 1910.1200(g) regulations. Performance will take place in Tracy, California, with the primary objective being the delivery of finished components that meet all specified Department of Defense standards.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

Phosphate Coating Services for Critical Gun PartsThis subcontract involves providing specialized phosphate coating services for critical gun parts on behalf of prime contractors delivering to the DLA Weapons Support ASC Commodities Division. The contractor is responsible for applying coatings to pins in strict accordance with MIL-DTL-16232 using approved written procedures to ensure all thickness and adherence specifications are met. The performance of this contract requires facility approval by the PCO to allow for DCMA in-process inspections and the submission of recent Government First Article or PVT test reports. Work will be performed in New Cumberland, Pennsylvania, under NAICS code 332813.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

Hot-Dip Zinc Coating ServicesThis subcontract for the Department of Defense involves providing hot-dip zinc coating services for prime contractors at the DDSP New Cumberland Facility. The scope of work requires the application of industrial galvanizing to 892 feet of extruded structural steel angles to ensure long-term corrosion prevention. All coating processes and final finishes must strictly adhere to ASTM A123 standards. The successful contractor is responsible for delivering the treated structural steel angles along with a formal certification of compliance.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 13 hours ago

DEADLINE

Industrial Coating and Finishing ServicesThis subcontract for Industrial Coating and Finishing Services involves providing surface treatment and protective coatings for metal assemblies to support prime contractors on DLA supply contracts. The scope of work focuses on the delivery of finished metal components while maintaining strict adherence to regulatory standards, specifically the prohibition of Hexavalent Chromium per DFARS 252.223-7008 and the hazardous material identification requirements of FAR 52.223-3. Managed under the Department of Defense through the Red River Receiving Building, the project falls under NAICS code 332813. The performance of these services is centered in the 75507-5000 zip code area. Interested parties should note the response deadline of November 17, 2026.

RED RIVER RECEIVING BLDG

POSTED

about 13 hours ago

DEADLINE

Aerospace Special Process ServicesThis subcontract for Aerospace Special Process Services involves performing NADCAP-certified special processes for prime contractors supporting DLA Weapons Support ASC aircraft component projects. The scope of work includes executing plating, anodizing, or heat treating as specified in drawing EI-014768257, with all deliverables requiring certifications of conformance. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division, with performance taking place at Tinker AFB. Strict adherence to aerospace quality standards and ITAR/EAR export controls is mandatory. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

Specialized Phosphate Coating ServicesThis subcontract for Specialized Phosphate Coating Services supports the DLA Weapons Support Land Supply Chain by providing phosphate coating for prime contractors. The scope of work involves applying coatings to metal components in strict accordance with MIL-STD-171, MIL-DTL-16232, and TT-C-490 Types I, II, and V to ensure all deliverables meet rigorous military specifications. To qualify for this engagement, providers must hold NADCAP certification for phosphate chemical processes as issued by the Performance Review Institute. The work is associated with NAICS code 332813 and is designated for performance in Tracy, California. Interested parties must respond by November 20, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Military-Spec Packaging and MarkingThis subcontract involves providing specialized packaging and marking services for critical hardware supporting prime contractors on DLA Weapons Support ASC projects. The scope of work requires the preservation and marking of 38 hardware units for shipment from their origin, strictly adhering to MIL-STD-2073-1E and MIL-STD-129 standards. The contractor must apply Preservation Method 31 utilizing compliant labeling equipment and military-grade packaging materials. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division and will be performed in New Cumberland. Interested parties should note the response deadline of November 17, 2026, for this requirement categorized under NAICS code 488410.

Motor Vehicle Towing

POSTED

about 13 hours ago

DEADLINE

Precision Screw Fabrication (NSN 5305-01-122-2830)This subcontract involves the fabrication of 38 precision screws, part number 99136454, for the DLA Weapons Support ASC Commodities Division. The project requires the use of CNC equipment to perform precision machining according to OEM drawings. All materials must be mercury-free in compliance with NAVSEA requirements, and the final delivery must meet a zero non-conformance standard per MIL-STD-105/ASQ Z1.4. Quality control must be maintained through inspection systems adhering to SAE AS9003 or ISO 9001, with sampling conducted per MIL-STD-1916 or ASQ H1331. The work is to be performed in New Cumberland, Pennsylvania. Interested parties must respond by November 17, 2026, regarding this requirement under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

Precision Machining of Stepped StudsThis subcontract involves the precision machining and fabrication of stepped steel studs for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires turning steel stock to create a specific stepped profile and threading the stud ends in strict accordance with the technical data package for NSN 5307-00-637-1615. To successfully execute the contract, the provider must utilize CNC lathes or precision manual turning equipment. The project mandates strict adherence to RQ006 quality conformance and requires sampling based on MIL-STD-1916 or ASQ H1331 standards. The final deliverable consists of four unfinished stepped steel studs accompanied by a Certificate of Quality Compliance. This opportunity falls under NAICS code 332710 and is managed by the Department of Defense.

POSTED

about 13 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves specialized military packaging, marking, and palletization executed in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001 requirements. The contractor is responsible for utilizing MIL-SPEC preservation materials and industrial equipment to prepare and deliver shipments under the First Destination Transportation program for FOB Origin delivery. The opportunity is a total small business set-aside under NAICS code 488510 for the Department of Defense. Performance will take place in Texarkana, Texas. Interested parties must respond by November 17, 2026, to provide these essential logistics services for the DLA Weapons Support ASC Commodities Division.

Freight Transportation Arrangement

POSTED

about 13 hours ago

DEADLINE

Manufacturing of Plain Hexagon Nuts (NSN 5310-01-166-6393)This subcontract, issued by the Department of Defense DLA Weapons Support ASC Commodities Division, requires the manufacture and delivery of 1,040 plain hexagon nuts under NSN 5310-01-166-6393. The project is designated as a Total Small Business Set-Aside under NAICS code 332722, with performance taking place in Texarkana. Production must strictly adhere to TDP Rev A Gen 1, QAP 19207, and the DLA Master List of Technical and Quality Requirements. To qualify, contractors must utilize precision machining equipment and maintain specific security and regulatory certifications, including CMMC Level 2 compliance and certification under the US/Canada Joint Certification Program for export control. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

MIL-SPEC Packaging and Destination DeliveryThis subcontract involves providing specialized military packaging and shipping services for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires strict adherence to MIL-STD-2073-1E and RP001 for packaging, as well as MIL-STD-129 for shipment marking. To ensure the integrity of the items, the contractor must utilize approved MIL-SPEC preservation and cushioning materials. The final completed assemblies are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. This opportunity is categorized under NAICS code 488510 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

Freight Transportation Arrangement

POSTED

about 13 hours ago

DEADLINE

Aerospace-Grade Electrical Components SupplyThis subcontract for Aerospace-Grade Electrical Components Supply involves providing raw materials and specialized components to prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work focuses on the delivery of high-reliability connectors, shielding, and MIL-SPEC wiring specifically for part number 1641030-1. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 334419. Strict adherence to regulatory standards is required, including compliance with the Buy American Act, the Berry Amendment, and NAVSEA 5100-003D mercury-free mandates. All delivered components must be accompanied by full Certificates of Conformance and comprehensive traceability documentation. The response deadline for this opportunity is November 17, 2026.

Other Electronic Component Manufacturing

POSTED

about 13 hours ago

DEADLINE

Special Purpose Electrical Cable Assembly FabricationThis subcontract involves the fabrication of six special purpose electrical cable assemblies, specifically part number 1641030-1, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The work must be performed in New Cumberland and requires strict adherence to zero-based sampling plans according to MIL-STD-1916 or ASQ H1331. Additionally, all deliverables must comply with NAVSEA 5100-003D mercury-free standards and be fully tested and marked upon delivery. From a regulatory and security standpoint, the contractor is required to maintain NIST SP 800-171 compliance and complete a CMMC Level 2 self-assessment. The project falls under NAICS code 335931 and is managed by the Department of Defense. Interested parties should note the response deadline of November 17, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

Socket Head Cap Screw Supplier (NSN 5305005504246)This subcontract involves the supply of 33 socket head cap screws for prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing these critical application fasteners according to NSN 5305005504246 specifications, with a strict prohibition on the use of additive manufacturing. Performance will take place at Tinker AFB. The contractor must ensure strict adherence to quality assurance standards MIL-STD-1916 or ASQ H1331, as well as compliance with MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N. All deliveries must be accompanied by a Certificate of Quality Compliance to verify that the fasteners meet the necessary requirements for critical application.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

Raw Material Supply for Aerospace WashersThis subcontract involves the supply of raw forged or cast metal blanks for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the casting or forging of metal to specific dimensions and grades as mandated by NAS1149 Revision 8. All materials must be free of mercury or mercury compounds and strictly adhere to the Buy American Act. The selected provider is responsible for delivering the raw blanks along with comprehensive material certifications to prove compliance with aerospace standards. This project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division, with the place of performance located in Tracy, California.

Rolled Steel Shape Manufacturing

POSTED

about 13 hours ago

DEADLINE

Manufacture and Supply of NAS1149 Flat WashersThis subcontract involves the manufacture and supply of 2,597 finished flat washers, identified by NSN 5310-01-499-8065, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The parts must be produced according to Basic Non-Govt Std NAS1149 Revision 8 using casting or forging processes, as additive manufacturing is strictly prohibited. All deliverables must be packaged in accordance with MIL-STD-2073-1E and delivered to Tracy, California. To qualify, the supplier must maintain SAE AS9003 or ISO 9001 certification and ensure full compliance with the Buy American Act. Quality assurance requires the implementation of zero-based sampling per MIL-STD-1916 or ASQ H1331. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

A-A-2962 Surface Finishing/Plating

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aerospace Surface Treatment and Finishing

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Aerospace Surface Treatment and Coating

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Aerospace Plating and Surface Treatment

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Aerospace Special Process Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aerospace Component Surface Treatment and Finishing

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Aerospace Finishing and Surface Treatment for Damper Components

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

ISO 4042 Electroplating Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

NADCAP-Approved Aerospace Special Processing

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aerospace Component Surface Treatment and Finishing

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aerospace Surface Treatment and Finishing

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

NADCAP-Approved Special Process Treatment

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS