Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aerospace Component Packaging and Distribution

Open

Federal

Response Deadline11/16/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled Aerospace Component Packaging and Distribution, involves the final packaging, marking, and shipment of critical aerospace components for prime contractors under DLA Air Force contracts. The scope of work requires strict adherence to MIL-STD-2073-1E and RP001 packaging standards, with all markings applied according to MIL-STD-129. The contractor is responsible for utilizing specific cushioning and D3 unit containers to ensure the safe delivery of marked parcels to the DLA Distribution DDSP New Cumberland Facility. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, the contract falls under NAICS code 488190. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

General Info

Subcontract for packaging, marking, and shipping aerospace components to DLA New Cumberland Facility.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

NAICS

488190 - Other Support Activities for Air Transportation

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A5-27-T-2829.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CONNECTING LINK, RIGID

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 8

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 12:00:00 PM ESTin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs final packaging, marking, and shipment of critical aerospace components for prime contractors on DLA Air Force contracts. Implements MIL-STD-2073-1E and RP001 packaging requirements and applies markings per MIL-STD-129. Utilizes specific cushioning and D3 unit containers for delivery to DLA Distribution DDSP New Cumberland Facility. Delivers marked and shipped parcels.

Similar Contracts

Same NAICS industry code

Aerospace Component Packaging and Freight Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Military-Grade Packaging and Shipping Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

MIL-SPEC Packaging and Marking Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Military-Grade Packaging and Marking Services

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Medical Grade Packaging and Labeling Services

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Military Grade Packaging and Marking ServicesThis HUBZone set-aside subcontract, issued by the Department of Defense under the DLA Weapons Support Land Supplier Operations Vehicle Support agency, requires specialized packaging and marking services for vehicular floor kits. The contractor is responsible for individually packaging nine kits to ensure safe delivery to the end user, strictly adhering to MIL-STD-129 for markings and labels and MIL-STD-2073-1E for packaging data. The work will be performed in Texarkana, Texas, under NAICS code 488190. The solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026. The final deliverable consists of nine individually packaged and marked kits ready for immediate shipment.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

MIL-SPEC Packaging and International Shipping (Poland)

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPEFA5-27-T-0188

Solicitation SPEFA5-27-T-0188 is a fixed-price procurement issued by the DLA Fleet Readiness Center for the acquisition of 12 shear bolts, identified by NSN 5306LN0035635 and part number NAS6704-8. The contract requires delivery within 30 days after order, with a required delivery date of November 6, 2026. Shipping terms are FOB Destination, with the delivery, inspection, and acceptance points all located at the Fleet Readiness Center in Cherry Point, NC. The contractor must adhere to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. Marking and labeling must comply with MIL-STD-129, and palletization must follow RP001. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331, with specific AQL levels for critical, major, and minor attributes. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment, and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic material restrictions, and the safeguarding of covered defense information.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

Solicitation # SPEFA5-27-T-0191

This procurement is a Request for Quotations issued by the DLA Aviation at Cherry Point, North Carolina, for the supply of 29 cushions, identified by NSN 8320LLNCC3646. The contract requires delivery within 45 days, with a required delivery date of March 5, 2027. Shipping is designated as FOB Destination, with delivery to the Fleet Readiness Center DLA in Cherry Point, NC. The items must be packaged according to ASTM D3951 and RP001, though the DLA Master List of Technical and Quality Requirements takes precedence. All packaging and labeling must comply with MIL-STD-129, and the material is noted to have no shelf life requirement. Inspection and acceptance will occur at the destination, utilizing sampling methods per MIL-STD-1916 or ASQ H1331, with a strict requirement of zero non-conformances for acceptance. The contract incorporates various FAR and DFARS clauses, including mandates for safeguarding covered defense information, compliance with the Buy American Act and Berry Amendment, and prohibitions on covered defense telecommunications equipment. Payment requests and receiving reports must be processed through the Wide Area WorkFlow system. All quotes must be submitted electronically via the DLA Internet Bid Board System.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

Solicitation # SPEFA5-27-T-0182

Solicitation SPEFA5-27-T-0182 is a federal requirement issued by the DLA Aviation at Cherry Point, North Carolina, for the procurement of 15 cushions (NSN 5330-LN-002-7822). The contract specifies a delivery timeline of 39 days after order, with a required delivery date of February 2, 2027. Shipping is designated as FOB Destination, with deliveries routed to the Fleet Readiness Center DLA in Cherry Point, NC. The material has no shelf life requirement and must adhere to specific physical identification and bare item marking standards under RQ017. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan requiring zero non-conformances for acceptance. Packaging must comply with ASTM D3951 and RP001, though the DLA Master List of Technical and Quality Requirements takes precedence. All shipments must be marked according to MIL-STD-129. Administratively, the contractor must utilize the Wide Area Workflow (WAWF) system for electronic invoicing and payment requests. The solicitation incorporates various FAR and DFARS clauses, including strict mandates on cybersecurity reporting, the prohibition of covered defense telecommunications equipment, and compliance with the Buy American Act.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

WIRE HARNESS, ELECTRIC

Solicitation # SPEFA5-27-T-0190

Solicitation SPEFA5-27-T-0190 is for the procurement of two electric wire harnesses, identified by NSN 1680-LN-002-8710 and part number 901-079-045-103, Revision B. These critical application items must be manufactured in accordance with drawing 901-079-045 and CAGE code 97499 (Bell Helicopter). The manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003. Delivery is required within 100 days after order, with an original required delivery date of May 26, 2027, shipped FOB Destination to the Fleet Readiness Center DLA in Cherry Point, NC. The contract mandates strict quality and packaging standards, including MIL-STD-130N(1) for identification marking and MIL-STD-129 for labeling. Packaging must follow ASTM D3951 and RP001, with the DLA Master List of Technical and Quality Requirements taking precedence. Inspection and acceptance will occur at the destination, utilizing sampling methods per MIL-STD-1916 or ASQ H1331. Administrative requirements include the use of the Wide Area Workflow (WAWF) system for electronic invoicing and payment. The solicitation also incorporates various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

Solicitation # SPEFA5-27-T-0186

This fixed-price solicitation, issued by the DLA Aviation at Cherry Point, North Carolina, is for the procurement of six nameplates under NSN 9905LLNC14478. The contract specifies a delivery timeframe of 22 days after order, with an original required delivery date of December 20, 2026. Delivery is FOB Destination, with the freight shipping address located at the Fleet Readiness Center DLA in Cherry Point, NC. The procurement is managed by Larry Kemp and requires the use of the Wide Area WorkFlow system for all electronic invoicing and payment requests. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over other standards. Packaging must adhere to ASTM D3951 and RP001, with marking and labeling following MIL-STD-129 and MIL-STD-130N(1). Quality assurance is based on MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. The contract incorporates several FAR and DFARS clauses, including requirements for SAM maintenance, NIST SP 800-171 cybersecurity assessments, and the Buy American Act. Offerors must provide entity identification and represent their small business status, including specific socioeconomic categories, as part of the submission process via the DLA-BSM Internet Bid Board System.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

Supply of Self-Locking Plate Nuts (NSN 5310016696897)

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Aerospace Component Packaging and Shipping

Freight Transportation Arrangement

POSTED

DEADLINE

Manufacture of Valve Disks (P/N 3169241-2)

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Aircraft Access Cover Manufacturer/SupplierThis subcontract, issued by the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division, requires the manufacture or procurement of five aircraft access covers under NSN 1560002470215. The supplier must ensure all units meet strict technical specifications and comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contract mandates the use of domestic materials and explicitly prohibits the use of additive manufacturing unless prior authorization is granted. Final delivery of the five units is subject to acceptance via origin inspection. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026, falling under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Key Washer Production and SupplyThis subcontract involves the production and supply of 52 key washers, identified by NSN 5310-00-888-3714, to support prime contractors fulfilling DLA supply contracts. The selected provider is responsible for manufacturing or sourcing the components to meet strict government specifications and ensuring all items are marked according to MIL-STD-129. Logistics will be managed through First Destination Transportation to ensure proper delivery. The contract is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, with the place of performance located at Tinker AFB. Operating under NAICS code 332722, the procurement process includes a response deadline of November 16, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Manufacturing of Metal Tube Assemblies (NSN 4710-01-691-2876)This subcontract involves the manufacture and supply of two metal tube assemblies, identified by NSN 4710-01-691-2876, for prime contractors supporting the DLA Weapons Support ASC Supplier OEM Division. The contractor is responsible for fabricating components according to Bell Textron Inc P/N 901-060-132-101 specifications, with performance taking place in Cherry Point. Strict adherence to quality and regulatory standards is required, including ISO 9001:2015 certification and DFARS 252.225-7001 compliance. The scope of work includes bare item marking per RQ017 and MIL-STD-129, sampling according to MIL-STD-1916 or ASQ H1331, and packaging in accordance with MIL-STD-2073-1E.

POSTED

DEADLINE

Aviation Rod End Clevis Supply

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

MIL-SPEC Aerospace Component PackagingThis subcontract involves the provision of specialized packaging materials and professional packing services for precision aerospace components supporting DLA Weapons Support ASC projects. The contractor is responsible for ensuring all components are packed according to MIL-STD-2073-1E and DLA requirements, specifically utilizing preservation material MAT:49 and wrapping material MAT:GB. All shipments must be marked in accordance with MIL-STD-129 for delivery to DLA Distribution Cherry Point, ensuring gears are fully prepared for FOB Origin shipment. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, the project falls under NAICS code 488510. The place of performance is located in Cherry Point, North Carolina. Interested parties should note the response deadline of November 16, 2026, for this specialized aerospace logistics requirement.

Freight Transportation Arrangement

POSTED

DEADLINE

Precision Spur Gear FabricationThis subcontract involves the fabrication of nine high-precision spur gears, specifically Honeywell Aerospace US LLC part number 3860118-2, for the DLA Weapons Support ASC Supplier OEM Division. The project requires the use of aerospace-grade alloys and precision gear cutting and grinding machinery to meet strict technical specifications. Performance will take place in Cherry Point, North Carolina, under NAICS code 333613. To ensure compliance and quality, the contractor must complete a CMMC Level 2 Self-Assessment and adhere to quality sampling standards per MIL-STD-1916 or ASQ H1331. The final deliverable consists of nine finished and inspected spur gears. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

Mechanical Power Transmission Equipment Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing specialized military-grade packaging and marking services for prime contractors supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The scope of work requires the packaging of 13 units in strict accordance with MIL-STD-2073-1E, specifically utilizing Preservation Method 41, Cleaning/Drying 1, Preservative Material 02, and Wrap Material GH. All items must be marked according to MIL-STD-129 using approved MIL-SPEC wrapping and cushioning materials to ensure compliance with Department of Defense standards. The project is designated under NAICS code 488510 and will be performed in New Cumberland, Pennsylvania. Once the packaging and marking processes are complete, the units are to be delivered for FOB Origin shipment to DLA Distribution. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

Freight Transportation Arrangement

POSTED

DEADLINE

Transmission Clutch Plate Retainer ManufacturingThis subcontract involves the manufacture and supply of 13 Transmission Clutch Plate Retainers for prime contractors supporting the DLA Weapons Support ASC. The project requires the production of part number 23091257 per NSN 2520-01-737-7674 specifications, utilizing precision machining to adhere to strict aerospace tolerances. All items must comply with RQ017 Physical Identification and Bare Item Marking standards. The contract mandates strict quality control with a zero-non-conformance requirement under MIL-STD-105/ASQ Z1.4 and full compliance with the Buy American Act. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 336412. The response deadline for this Department of Defense requirement is November 16, 2026.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Eye Bolt Supply (NSN 5306-01-019-7301)

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS