Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aerospace Component Packaging and Logistics

Open

Federal

Response Deadline11/13/2026, 09:00:00 AM PST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Aerospace Component Packaging and Logistics subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, involves providing specialized packaging services for prime contractors fulfilling DLA supply contracts. The scope of work includes the packaging of non-hazardous materials according to ASTM D3951 and hazardous materials per TQ requirement IP025, ensuring all structural fittings are properly prepared for FOB Origin shipment. All shipments must be labeled in strict accordance with MIL-STD-129. This project is categorized under NAICS code 488410 and will be performed in San Diego, California. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

General Info

DoD subcontract for specialized aerospace packaging and logistics services in San Diego, California.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

NAICS

488410 - Motor Vehicle Towing

Place of Performance

SAN DIEGO, CA, 92136-3581, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A5-27-T-2721.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FITTING, STRUCTURAL COM

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 6

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 09:00:00 AM PSTin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies specialized packaging for prime contractors delivering DLA supply contracts. Performs packaging of non-hazardous materials per ASTM D3951 and hazardous materials per TQ requirement IP025. Executes labeling of all shipments in accordance with MIL-STD-129. Delivers properly packaged and labeled structural fittings ready for FOB Origin shipment.

Similar Contracts

Same NAICS industry code

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves providing military-grade packaging and marking for 57 units destined for DLA Distribution San Joaquin in Tracy, California. All hardware must be processed in strict accordance with MIL-STD-2073-1E and RP001 for packaging, and MIL-STD-129 for marking. The contractor is required to apply preservation and cushioning materials following Pres Mthd 33 using approved MIL-SPEC materials. Execution of these services requires specialized knowledge of the DLA Master List of Technical and Quality Requirements. This opportunity falls under NAICS code 488410 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

MIL-SPEC Packaging and Delivery ServicesThis subcontract for MIL-SPEC Packaging and Delivery Services supports the DLA Weapons Support Land Supply Chain by providing specialized military-grade packaging, labeling, and shipping for precision hardware. The contractor is responsible for ensuring all springs are packaged according to ASTM D3951 and RP001 DLA requirements, with labeling strictly adhering to MIL-STD-129 standards. The scope of work includes coordinating the final delivery of these materials to Industries of the Blind Inc. located in Greensboro, North Carolina. This project falls under NAICS code 488410 and is managed under the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

MIL-STD-129 Compliant Packaging and Shipping

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

MIL-SPEC Waterproof/Opaque Packaging ProviderThis subcontract involves providing specialized packaging and marking services for prime contractors supporting DLA Weapons Support Land projects. The scope of work requires sealing components in medium duty, waterproof, greaseproof, and opaque bags in strict accordance with MIL-DTL-117, Type II, Class C, Style 1. The provider is responsible for delivering three individually sealed and marked units. Compliance with rigorous military standards is mandatory, specifically MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N, as well as 29 CFR 1910.1200 for hazardous materials labeling. The project is managed under the Department of Defense for the DLA Weapons Support Land Supplier Operations Vehicle Support, with performance taking place in New Cumberland, Pennsylvania. The response deadline for this opportunity is November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

MIL-SPEC Packaging and Marking

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

MIL-SPEC Packaging and Shipping ServicesThis subcontract for MIL-SPEC Packaging and Shipping Services supports the Department of Defense through the DLA Weapons Support Land Supply Chain. The scope of work involves providing specialized military packaging and logistics for prime contractors, specifically focusing on the preservation and shipment of 71 shafts. All work must strictly adhere to MIL-STD-2073-1E Preservation Method 41, with marking and palletization following MIL-STD-129 and RP001 standards, respectively. A critical safety requirement is the total exclusion of mercury compounds during the preservation process. The finalized palletized hardware is to be delivered to DLA Distribution DDSP New Cumberland. This opportunity falls under NAICS code 488410 and was posted on November 6, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract involves providing specialized military packaging and palletization services for the DLA Weapons Support Land Supply Chain. The scope of work focuses on the preparation of high-value mechanical components, specifically the delivery of a shipment-ready Worm Shaft Kit to the USS Richard M McCool Jr LPD 29. All work must be performed in strict accordance with MIL-STD-129 and RP001 standards, ensuring that requirements exceed ASTM D3951 specifications through the use of MIL-SPEC materials and equipment. The project is managed under NAICS code 488410 for the Department of Defense. The response deadline for this opportunity is November 16, 2026, with the place of performance designated as FPO 09591.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Defense-Compliant Packaging and Marking ServicesThis subcontract for Defense-Compliant Packaging and Marking Services supports prime contractors working with the Department of Defense under the DLA Weapons Support Fluid Handling Division. The selected provider will be responsible for the specialized packaging, marking, and labeling of components, ensuring strict adherence to ASTM D3951 and RP001 standards. All deliverables must utilize MIL-SPEC materials and compliant labeling systems that meet MIL-STD-129 and the DLA Master List of Technical and Quality Requirements. The project is categorized under NAICS code 488410 and will be performed in New Cumberland, Pennsylvania. Interested parties must submit their responses by November 16, 2026, to provide finished, packaged, and labeled components that meet all specified military and technical guidelines.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

Military-Grade Packaging and MarkingThis subcontract, titled Military-Grade Packaging and Marking, is issued by the Department of Defense under the DLA Weapons Support Land Supply Chain. The selected provider will perform specialized packaging and marking services for prime contractors on Defense Logistics Agency supply contracts. All work must be completed using military-specification materials and industrial labeling equipment to ensure shipments are ready for final DLA acceptance. The scope of work requires strict adherence to RP001 DLA Packaging Requirements, with marking performed according to MIL-STD-129 and component packaging following MIL-STD-2073-1E. This opportunity falls under NAICS code 488410 and was posted on November 6, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing specialized military packaging and marking for prime contractors supporting DLA Weapons Support projects. The scope of work requires the delivery of three packaged and marked control cams, ensuring all items are processed according to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. The contractor must utilize specific preservation methods and materials to ensure the safe transport of goods to DLA Dist San Joaquin. Performance of these services will take place in Tracy, California, under the oversight of the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

MIL-SPEC Packaging and Marking for Hub BodyThis subcontract involves providing specialized packaging and marking services for hub bodies supporting the Department of Defense, specifically for the DLA Weapons Support Land Supplier. The contractor is responsible for preparing four units using ASTM D3951 compliant materials and following RP001 standards, with all labeling executed in accordance with MIL-STD-129. The completed units must be securely packaged and delivered to DLA Distribution DDSP in New Cumberland. This project falls under NAICS code 488410 and requires strict adherence to military specifications to ensure successful destination acceptance.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

MIL-SPEC Packaging and Hazardous Materials ShippingThis subcontract, titled MIL-SPEC Packaging and Hazardous Materials Shipping, involves providing specialized packaging, final packing, and marking services for prime contractors supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The scope of work requires the secure packing and labeling of four brackets for delivery to DLA Distribution San Joaquin in Tracy, California. All operations must strictly adhere to military and industry standards, including MIL-STD-129, RP001, and ASTM D3951. The contractor is responsible for handling hazardous materials in accordance with IP025, FED-STD-313, and the Hazard Communication Standard 29 CFR 1910.1200. The response deadline for this opportunity is November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 7 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

Special Purpose Electrical Cable Assembly SupplyThis subcontract involves the manufacture or procurement of six special purpose electrical cable assemblies matching NSN 5995015840982 for the DLA Weapons Support ASC Supplier Oper OEM Division. The project requires strict adherence to MIL-STD-129 marking standards and First Destination Transportation delivery requirements, with performance taking place in San Diego. To be eligible, the provider must maintain NIST SP 800-171 cybersecurity compliance and provide certification against the use of prohibited telecommunications equipment. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, under NAICS code 334419.

Other Electronic Component Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Dial Indicating Pressure GagesThis subcontract involves the supply of 25 dial indicating pressure gages for prime contractors supporting DLA Weapons Support ASC projects. The contractor is responsible for manufacturing or sourcing gages that strictly adhere to NSN 6685014410843 specifications, ensuring all units are mercury-free per IP056 certification. Operational requirements include cleaning according to MIL-G-18997E and packaging in compliance with MIL-STD-2073-1E and RP001. Additionally, all items must be marked per MIL-STD-129 using Special Marking Code 05. The work is associated with NAICS code 334514 and will be performed in New Cumberland.

Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supplier of Temperature Indicating Controls (NSN 6685015018697)This subcontract involves the supply of four Temperature Indicating Controls under NSN 6685015018697 for the Department of Defense, specifically the DLA Weapons Support ASC Supplier OEM Division. The selected provider is responsible for manufacturing or sourcing hardware that strictly adheres to mercury restrictions and meets rigorous quality assurance standards per MIL-STD-1916 or ASQ H1331. All items must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129. The contract specifies FOB Origin delivery to DLA Distribution DDSP in New Cumberland, Pennsylvania. Operating under NAICS code 334511, the agreement requires the delivery of these specialized controls to support prime contractors fulfilling DLA supply requirements. The response deadline for this opportunity is November 13, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 7 hours ago

DEADLINE

Hinge Assembly Fabrication and SupplyThis subcontract involves the fabrication and supply of five hinge assembly units, identified by NSN 5340014718518, for prime contractors under the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division. The selected provider must manufacture the hardware according to strict technical specifications, utilizing MIL-STD-1916 for sampling and quality inspection, while adhering to MIL-STD-2073-1E and MIL-STD-129 for packaging and marking. Performance of the contract will take place in San Diego, California. To be eligible, the contractor must maintain ISO 9001:2015 certification and ensure CMMC Level 2 compliance. Additionally, the submission of Source Approval Request documentation is required. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, falling under NAICS code 332510.

Hardware Manufacturing

POSTED

about 7 hours ago

DEADLINE

Dial Window Manufacturing and SupplyThis subcontract involves the manufacture and supply of 13 dial windows, specifically NSN 5355-00-392087-1, for prime contractors supporting the DLA Weapons Support ASC Supplier OEM Division. The contractor must produce these units according to technical data provided via the DLA portal, ensuring all materials are of domestic origin. Quality control and logistics are strictly governed by military standards, requiring sampling plans per MIL-STD-1916 or ASQ H1331 Table 1 and packaging in accordance with MIL-STD-2073-1E. The final delivery of the packaged and marked units is to be made to the government destination at Hill AFB.

All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

Time Totalizing Meter Manufacturer/SupplierThis subcontract involves the supply of eight time totalizing meters for prime contractors working on DLA Weapons Support ASC projects. The supplier must provide meters that meet NSN 6645-01-486-1030 and adhere strictly to RA001 quality requirements and RQ025 mercury prohibitions. All items must be packaged and marked according to MIL-STD-129 and MIL-STD-2073-1E standards, with quality assurance inspections conducted per MIL-STD-1916 or ASQ H1331. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Operator OEM Division. Delivery of the compliant meters is required FOB Origin to DLA Distribution San Joaquin, with the place of performance located in Tracy, California. The procurement falls under NAICS code 334517.

Irradiation Apparatus Manufacturing

POSTED

about 7 hours ago

DEADLINE

Military-Grade Packaging and Labeling

Freight Transportation Arrangement

POSTED

about 7 hours ago

DEADLINE

Manufacturing of Straight Headed Pins (NSN 5315-0119-17595)

Hardware Manufacturing

POSTED

about 7 hours ago

DEADLINE

Loop Clamp SupplierThis subcontract involves the supply of loop clamps for prime contractors working on DLA Weapons Support ASC projects under the Department of Defense. The selected supplier is responsible for manufacturing or sourcing a specific loop clamp, NSN 5340-01-612-5776, ensuring it adheres to the DLA Master List of Technical and Quality Requirements. All items must be packaged according to MIL-STD-2073-1E and marked in accordance with MIL-STD-129. The contract requires the delivery of the completed hardware components to the designated destination point within 20 days of the award. Performance will take place in Lenoir, North Carolina, under NAICS code 332510. Interested parties must respond by the deadline of November 13, 2026.

Hardware Manufacturing

POSTED

about 7 hours ago

DEADLINE

Manufacturing and Supply of Electrical Rotating Equipment End BellsThis subcontract involves the manufacturing and supply of five specialized End Bell components for electrical rotating equipment to support DLA supply contracts. The work must be performed in accordance with the DLA Master List of Technical and Quality Requirements, with all quality inspections conducted under an ISO 9001:2015 certified system. Final products must be packaged and labeled according to ASTM D3951 and MIL-STD-129 standards. The contract is issued by the Department of Defense through the DLA Weapons Support ASC Supplier OEM Division, with performance located in San Diego. Compliance requirements include a CMMC Level 2 self-assessment and adherence to Buy American regulations. The response deadline for this opportunity is November 13, 2026.

Motor and Generator Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Electrical Component (NSN 6635016988852)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, requires the provision of one unit of electrical component NSN 6635016988852. The contractor is responsible for manufacturing or sourcing the item in strict accordance with the DLA Master List of Technical and Quality Requirements. Performance will take place in New Cumberland, Pennsylvania, with a response deadline set for November 13, 2026. The contract mandates rigorous adherence to military standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Quality assurance must follow MIL-STD-105/ASQ Z1.4, with a requirement for zero non-conformances. Additionally, the provider must ensure full compliance with the Buy American Act and meet NIST SP 800-171 cybersecurity assessment standards.

Analytical Laboratory Instrument Manufacturing

POSTED

about 7 hours ago

DEADLINE

Access Door Hinge SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, requires the supply of 14 specialized access door hinges identified by NSN 5340-01-485-6825. The contractor is responsible for manufacturing or sourcing these components, with the possibility of utilizing additive manufacturing provided that ESA approval is obtained. All deliverables must be packaged according to ASTM D3951 standards for non-hazardous materials and palletized following RP001 guidelines. The place of performance for this contract is located in Cherry Point, and the procurement falls under NAICS code 332510.

Hardware Manufacturing

POSTED

about 7 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS