Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aerospace Component Qualification & Testing Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks third-party qualification and performance testing services for ball bearings intended for aerospace applications, ensuring full compliance with Department of Defense and Defense Logistics Agency military standards. Testing must encompass rigorous environmental exposure, fatigue endurance, and other critical performance metrics to validate reliability under operational conditions. All testing procedures must adhere to established military specifications and result in formal, documented reports that demonstrate conformance and traceability. This subcontract is categorized under NAICS code 541380, indicating engineering and technical services, and is administered by the Department of Defense through the Ok DLA Aviation office in Oklahoma City. The work focuses exclusively on validating the structural and functional integrity of ball bearings through controlled testing protocols, with no provision for manufacturing or supply. The requirement is open for subcontractor participation, and all deliverables must meet the highest fidelity standards for military-grade component certification.

General Info

Subcontract for DLA-approved ball bearing testing, ensuring military-grade aerospace compliance and durability.

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma City

NAICS

541380 - Testing Laboratories and Services

Place of Performance

OK, USA

Set-Aside

NONE

Documents

This scope was carved out of SPRTA126Q0057.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BEARING, BALL, ANNULA.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedMay 11

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Third-party qualification and performance testing of ball bearings to meet DLA and military standards, including environmental, fatigue, and compliance testing with formal reporting.

Similar Contracts

Same NAICS industry code

Construction Aggregate TestingThis subcontract for Construction Aggregate Testing, managed by the California Department of General Services, involves providing specialized testing services for aggregates used in roads, curbs, walkways, and paving on CALFIRE facility projects. The selected contractor will be responsible for performing sampling and laboratory testing, utilizing laboratory scales and sieve analysis equipment to ensure all materials align with project design documents. The primary deliverable for this engagement is the provision of detailed aggregate quality and gradation reports. The project is located in San Diego and falls under NAICS code 541380. Interested parties must submit their responses by the deadline of November 24, 2026. This opportunity is designed to support prime contractors in maintaining quality control and regulatory compliance for critical infrastructure improvements within the CALFIRE network.

California Department of General Services

POSTED

about 3 hours ago

DEADLINE

Nondestructive Testing (NDT) ServicesThis subcontract for Nondestructive Testing (NDT) Services involves performing specialized inspections on structural elements for prime contractors working on CALFIRE facility projects. The primary objective is to detect internal flaws using ultrasonic, radiographic, or magnetic particle testing equipment. The selected provider is responsible for delivering detailed NDT certification reports and comprehensive flaw analysis to ensure structural integrity. The project is managed through the California Department of General Services and will be performed in San Diego. To qualify, personnel must hold an NDT Level II certification or higher in accordance with ASNT CP-189 standards. Interested parties should note the response deadline of November 24, 2026, and the associated NAICS code 541380.

California Department of General Services

POSTED

about 3 hours ago

DEADLINE

Structural Steel, Bolting, and Welding InspectionThis subcontract opportunity, managed by the California Department of General Services, involves providing specialized visual and technical inspections for structural steel, welding, and high-strength bolting on CALFIRE facility projects located in San Diego. The selected contractor will be responsible for utilizing welding gauges and torque wrenches to ensure structural integrity, ultimately delivering detailed welding inspection reports and bolting torque logs to the prime contractor. To qualify for this engagement, personnel must hold both AWS Certified Welding Inspector and ICC Structural Steel and Welding Inspector certifications. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline set for November 24, 2026.

California Department of General Services

POSTED

about 3 hours ago

DEADLINE

Concrete and Reinforcing Steel Special InspectionThis subcontract for Concrete and Reinforcing Steel Special Inspection involves providing specialized inspection and testing services for prime contractors on CALFIRE facility projects in San Diego. The scope of work includes inspecting reinforcing steel placement and performing concrete sampling and testing for structures such as barracks, apparatus bays, and generator buildings. Required deliverables include concrete strength reports and reinforcing steel inspection checklists, utilizing tools such as concrete cylinders, slump cones, and compression testing machines. Qualified providers must hold ICC Reinforced Concrete Special Inspector and ACI certifications to ensure compliance with project standards. This opportunity is managed through the California Department of General Services under NAICS code 541380. The response deadline for this solicitation is November 24, 2026.

California Department of General Services

POSTED

about 3 hours ago

DEADLINE

Soils Inspection and Density TestingThis subcontract, managed by the California Department of General Services, involves providing specialized soils inspection and density testing for a CALFIRE facility project, specifically a fire station replacement in Potrero, California. The selected contractor will perform both field and laboratory testing of soils to support prime contractors during critical phases of construction, including clearing, grading, and foundation preparation. All work must be conducted in accordance with ASTM D 3740 standards, utilizing nuclear gauges and laboratory soil testing apparatus to ensure structural integrity. The contractor is responsible for delivering detailed soil density test reports and comprehensive inspection logs. This opportunity falls under NAICS code 541380 and was posted on October 28, 2026, with a response deadline of November 24, 2026. While the project is located in Potrero, the place of performance is listed within San Diego.

California Department of General Services

POSTED

about 3 hours ago

DEADLINE

Environmental Analytical Testing ServicesThis subcontract for Environmental Analytical Testing Services supports prime contractors working on research and enforcement projects for the California Department of Fish & Wildlife. The scope of work involves performing specialized analytical testing on water and waste samples, specifically focusing on nutrient analysis, turbidity, BOD, COD, and low-level cleanups for pesticides, PAHs, and SVOCs. All work must be performed in accordance with EPA and SW-846 standards, and the provider is required to maintain ELAP certification to deliver Level II and Level IV analytical reports. The project is categorized under NAICS code 541380 and is designated for performance in Amador. Interested parties should note that the response deadline is November 17, 2026. This opportunity is managed through the Cal eProcure system for the state of California.

California Department of Fish & Wildlife

POSTED

about 3 hours ago

DEADLINE

NDT Inspection for Cam AssemblyThis subcontract involves providing Non-Destructive Testing services for prime contractors supporting DLA Weapons Support ASC aerospace projects. The scope of work focuses on conducting structural integrity inspections of forged and machined cam assemblies utilizing ultrasonic, radiographic, or penetrant methods. All work must be performed in accordance with RQ040 NDT Accreditation Requirements, and the contractor is responsible for delivering certified inspection reports. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Tinker AFB. Interested parties should note the response deadline of November 5, 2026, and the classification of the work under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Third-Party Inspection and CertificationThis subcontract for Third-Party Inspection and Certification supports the Department of Defense at the Jacksonville Building. The selected provider will perform final inspections and quality validation for prime contractors delivering aviation lighting for the DLA. Responsibilities include conducting functional testing and dimensional inspections using CMM and electrical test equipment to ensure compliance with TDP Rev A Gen 1, culminating in the delivery of certificates of conformance and detailed inspection reports. Critical requirements for this engagement include maintaining CMMC Level 2 certification and coordinating directly with the DCMA for source inspections. The project falls under NAICS code 541380 and is based in Jacksonville, Florida. Interested parties must respond by November 9, 2026.

JACKSONVILLE BLDG

POSTED

about 8 hours ago

DEADLINE

Specialized Testing Laboratory (First Article Test)This subcontract opportunity is for a Specialized Testing Laboratory to perform First Article Testing for prime contractors supporting DLA Weapons Support Land Supplier Operations. The selected provider will be responsible for testing two units using specialized shock and impact testing rigs to verify that performance metrics align with the provided technical data package. The final deliverable for this engagement is a certified FAT Test Report. The project is managed under NAICS code 541380 and will be performed in New Cumberland. Due to the nature of the work, the contractor must have access to ITAR and EAR export-controlled data, and ISO/IEC 17025 certification is preferred. Interested parties must respond by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

First Article Test (FAT) Laboratory ServicesThis subcontract for First Article Test Laboratory Services supports the DLA Weapons Support Nuclear Reactor Program. The selected provider will perform First Article Testing on a single unit of electrical insulation to ensure full compliance with MIL-I-24768/1(1) standards. This process involves utilizing specialized thermal resistance and dielectric testing equipment to validate the component, culminating in the delivery of one validated test unit and a certified First Article Test report. Eligible contractors must hold ISO 9001:2015 or ISO/IEC 17025 certification to qualify for the work. The performance of these services is located at Hill AFB. Interested parties should note the response deadline of November 9, 2026, for this Department of Defense requirement categorized under NAICS code 541380.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 8 hours ago

DEADLINE

Material Testing and Certification LaboratoryThis subcontract for the DLA Weapons Support Land Supply Chain involves providing Material Testing and Certification Laboratory services to perform Production Lot Testing for prime contractors. The primary objective is to validate the quality conformance of O-rings by reviewing material certifications, process operation sheets, and inspection method sheets. Specific technical requirements include verifying asbestos-free composition and ensuring surface imperfections adhere to ISO 3601-3 standards, culminating in the delivery of a comprehensive Test Report. The project is based in Keyport, Washington, and falls under NAICS code 541380. Due to the nature of the technical data handled during the certification process, the contractor must maintain CMMC Level 2 compliance. Interested parties should note the response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

First Article Testing (FAT) ServicesThis subcontract for First Article Testing services is issued by the Department of Defense through the DDSP New Cumberland Facility. The selected contractor will perform quality conformance inspection and testing for prime contractors delivering DLA supply contracts, specifically focusing on one prototype unit. Using laboratory equipment, the contractor must verify material specifications, durability, and pressure in strict accordance with MIL-H-24580. The scope of work requires the delivery of a comprehensive test report and one validated First Article unit, with all test results provided to the Engineering Support Activity. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380. Performance will take place in New Cumberland, Pennsylvania, with responses due by November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 8 hours ago

DEADLINE

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

CEMS Event Reporting and Data ManagementThe CEMS Event Reporting and Data Management subcontract involves providing specialized data entry and reporting services for Department of the Air Force F110 engine projects. The selected contractor will be responsible for reporting component status into the Comprehensive Engine Management System in strict accordance with USAF Technical Order 00-25-254-1 to support prime contractors. Managed under the Department of Defense through the Ok DLA Aviation At Oklahoma City, this effort requires personnel to obtain a favorable National Agency Check with Inquiries to ensure authorized access to DoD systems. The primary deliverable for this engagement is the accurate completion of CEMS Event Reporting entries.

Administrative Management and General Management Consulting Services

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Aviation Component Inspection and Test ServicesThe Aviation Component Inspection and Test Services subcontract involves performing critical inspections and testing for prime contractors supporting Department of the Air Force F110 engine projects. The primary objective is to certify that temperature sensors adhere to Critical Safety Item standards through rigorous testing conducted according to engineering drawings. The selected provider must utilize precision calibration equipment to generate detailed written documentation and material certifications. To qualify for this engagement, contractors must hold either AS9100 or ISO 9001-2015 certification. The scope of work culminates in the delivery of certified inspection and test reports to the Department of Defense via the Ok DLA Aviation office in Oklahoma City. Responses for this opportunity are due by December 2, 2026.

Testing Laboratories and Services

POSTED

about 13 hours ago

DEADLINE

in about 1 month

F110 Engine Temperature Sensor ProductionThis subcontract involves the production and supply of 32 finished temperature sensors, identified by NSN 2915-01-485-7506PR, for prime contractors supporting Department of the Air Force F110 engine projects. The selected provider must manufacture the sensors in strict accordance with Engineering Drawing, ECP, and ECO specifications, while ensuring full supply chain traceability and the implementation of IUID marking. To qualify, the contractor must hold AS9100 or ISO 9001-2015 certification and adhere to rigorous Critical Safety Item standards. Final deliverables must include comprehensive inspection and test records to verify compliance. The opportunity is managed through the Department of Defense via DLA Aviation at Oklahoma City, with a response deadline of December 2, 2026.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Aerospace NDT Inspection and Quality ValidationThe Aerospace NDT Inspection and Quality Validation subcontract involves providing specialized non-destructive testing services for prime contractors supporting Department of the Air Force F110 engine projects. The scope of work includes performing ultrasonic testing, X-ray radiographic testing, magnetic particle inspection, and dye penetrant inspection utilizing ultrasonic transducers and X-ray machinery. The selected provider is responsible for delivering detailed inspection reports and certifications of conformance to ensure all components meet strict quality standards. Managed under the Department of Defense through the Ok DLA Aviation At Oklahoma City, this requirement mandates that the contractor hold NAS410 and AS9100 certifications. The opportunity is categorized under NAICS code 541380, with a response deadline set for November 5, 2026.

Testing Laboratories and Services

POSTED

about 13 hours ago

DEADLINE

Aerospace Surface Finishing and CoatingThis subcontract for Aerospace Surface Finishing and Coating involves providing specialized coatings, plating, and surface treatments for prime contractors supporting Department of the Air Force F110 engine projects. The scope of work includes the application of thermal sprays, anodizing, and aerospace coatings utilizing vacuum chambers and plating tanks to enhance wear resistance and prevent corrosion on rotor components. Managed by the Department of Defense through the Ok DLA Aviation At Oklahoma City, the contract requires the provider to maintain Nadcap accreditation to ensure industry quality standards. The solicitation was posted on October 28, 2026, with a response deadline of November 5, 2026, falling under NAICS code 332813.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 13 hours ago

DEADLINE

Precision CNC Machining of Fan RotorThis subcontract involves the precision CNC machining of fan rotors for prime contractors supporting Department of the Air Force F110 engine projects. The scope of work includes turning, milling, boring, and drilling based on original design drawings, utilizing high-precision 5-axis CNC mills and large-scale lathes to deliver finished rotor components. Managed by the Department of Defense through the DLA Aviation office in Oklahoma City, the project falls under NAICS code 332710. To ensure strict quality and safety standards for aerospace components, the performing contractor must maintain both AS9100 and ISO 9001 certifications.

POSTED

about 13 hours ago

DEADLINE

Aerospace Grade Raw Material Supply (Fan Rotor Alloys)This subcontract, managed by the Department of Defense through DLA Aviation at Oklahoma City, involves the supply of raw aerospace-grade alloys for Department of the Air Force F110 engine projects. The scope of work includes the sourcing, smelting, and forging of titanium or nickel-based superalloy raw billets and ingots to meet strict military and aerospace material specifications. To ensure quality and regulatory adherence, the provider must maintain AS9100 certification and comply with DFARS specialty metals requirements. All deliveries must be accompanied by comprehensive material certifications and Mill Test Reports. The opportunity was posted on October 28, 2026, with a response deadline of November 5, 2026, under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

Aerospace Component Packaging and ShippingThis subcontract for Aerospace Component Packaging and Shipping supports Department of the Air Force F110 engine projects through the Ok DLA Aviation At Oklahoma City. The scope of work involves providing specialized packaging and shipping services for prime contractors, specifically focusing on the secure transport of rotors to Tinker AFB. Key technical requirements include the use of vacuum sealing equipment for moisture barrier packaging and the creation of custom crating for oversized precision parts. All operations must maintain strict compliance with MIL-STD-2073 standards to ensure the integrity of aerospace components. The opportunity is categorized under NAICS code 484220 and was posted on October 28, 2026, with a response deadline of November 5, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 13 hours ago

DEADLINE

CSI-Compliant Bag/Tag Marking and Packaging ServicesThis subcontract for the Department of Defense, specifically Ok DLA Aviation At Oklahoma City, involves providing specialized IUID marking and military-grade packaging services for prime contractors. The scope of work requires the execution of Bag/Tag marking in strict accordance with MIL-STD-130, with a critical requirement that no direct marking be applied to Critical Safety Items. All shipments must be packaged and marked following MIL-STD-2073-1 and MIL-STD-129 standards using IUID-compliant labeling systems. The project deliverables consist of five IUID-marked and packaged units prepared for FOB Origin shipment. This opportunity falls under NAICS code 561910 and was posted on October 28, 2026, with a response deadline of November 27, 2026.

Packaging and Labeling Services

POSTED

about 13 hours ago

DEADLINE

Manufacture of Turbine Nozzle Supports (Critical Safety Item)This subcontract involves the manufacture of five turbine nozzle supports designated as Critical Safety Items for prime contractors supporting DLA Aviation. The components must be fabricated to match MPNs 07482 1386M15G20 or 51992 1386M15G20, utilizing either aerospace casting or precision CNC machining in strict accordance with technical documents F3YTBK5157A006 and FD20302402216. To qualify, the manufacturer must hold ISO 9001-2015 certification and demonstrate full compliance with DFARS 252.204-7012 and NIST SP 800-171 security standards. The project falls under NAICS code 336413 and is managed through the Department of Defense for the DLA Aviation office in Oklahoma City.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

SUPPORT,TURBINE NOZ

Solicitation # SPRTA127Q0033

Solicitation SPRTA127Q0033 is a firm fixed price requirement issued by the Department of Defense, specifically the DLA Aviation office at Tinker AFB, for the procurement of five units of Support, Turbine Noz (NSN 2840-01-347-2206 PR). The items must conform to manufacturer part numbers 07482 1386M15G20 or 51992 1386M15G20 and are designated as Critical Safety Items. Due to this designation, direct marking is prohibited, and the only authorized method for Item Unique Identification (IUID) is Bag/Tag in accordance with MIL-STD-130. The procurement is associated with Foreign Military Sales Case GR-D-SBD and requires compliance with ISO 9001-2015 quality standards. The contract emphasizes strict packaging and marking standards, requiring adherence to MIL-STD-2073-1 for packaging and MIL-STD-129 for shipping and storage markings. Delivery is set as FOB Origin. Evaluation of offers will be primarily based on price and cost, with the contracting officer also considering SPRS risk assessments regarding item, price, and supplier performance. Offerors must maintain active SAM registration, including a valid UEI and CAGE code, and comply with cybersecurity requirements under DFARS 252.204-7012 and NIST SP 800-171. Inspection and acceptance will occur at the origin, with all reporting submitted via Wide Area Workflow.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 13 hours ago

DEADLINE

ROTOR, FAN_End_Item_F110_NSN_2840015807062PR_PN_9547M28G15

Solicitation # FD20302700073

The Department of the Air Force, specifically the 421st Supply Chain Management Squadron at Tinker AFB, is conducting market research via a Sources Sought Synopsis to identify potential sources for the spares procurement of a fan rotor for the F110 platform. The requirement involves the manufacture of part number 9547M28G15 (NSN 2840-01-580-7062PR) under NAICS code 336412. This effort is currently in the research phase to determine the best acquisition strategy and to evaluate if the requirement can be a small business set-aside. Consequently, there is no active solicitation, no available funding at this time, and no contract will be awarded based solely on this market research. Interested sources must be capable of providing all labor, materials, and equipment for the new manufacture of the item, including inspection, testing, and packaging. Because the item is classified as a propulsion critical safety or critical application item, potential sources must obtain Engineering Support Activity approval. This requires the submission of a Company Profile and a Source Approval Request, as well as valid quality certifications such as ISO 9001, AS9100, or NATO AQAP-2070. The government is seeking information from all business types, including large and various small business categories, to determine the competitive landscape for this procurement.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 13 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Quality Assurance and Acceptance Testing Support

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Quality Assurance & Inspection Services

DLA Maritime - Pearl Harbor

POSTED

CLOSED

First Article Testing (FAT) Services for CBRN Filters

POSTED

DEADLINE

First Article Testing (FAT) and Certification Services

DLA Land Warren

POSTED

DEADLINE

First Article Testing and Reporting

POSTED

CLOSED

Inspection, Testing, and Quality Assurance

POSTED

DEADLINE

Technical Support and Calibration Services for Sensor Installation

Network Contract Office 23 (36C263)

POSTED

CLOSED

Hazardous Material Labeling and Compliance Services

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

CLOSED

Radioactive Materials Notification & Labeling

AVIATION SUPPLY CHAIN

POSTED

CLOSED

Quality Inspection and Testing Services

ASC COMMODITIES DIVISION

POSTED

CLOSED

Shelf-Life Management & Certification Services

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

CLOSED

Quality Inspection and Testing Services

ASC COMMODITIES DIVISION

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS