Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aerospace Component Testing and Inspection Services

Active

Federal

Response Deadline04/06/2027, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Aerospace Component Testing and Inspection Services involves performing specialized inspection and testing of manufactured oxygen regulators for prime contractors supporting Air Force Sustainment Center F-15 aircraft projects. The scope of work includes conducting pressure and leak testing, verifying material certifications, and inspecting parts against technical data packages using calibrated measurement tools within oxygen-safe environments. The service provider must maintain AS9100 certification and is responsible for delivering detailed inspection reports and test certificates. Managed by the DLA Aviation Oklahoma City under the Department of Defense, the contract falls under NAICS code 541380 and was posted on April 6, 2026, with a response deadline of April 6, 2027.

General Info

AS9100 certified testing and inspection of F-15 oxygen regulators for DLA Aviation.

Agency

Department Of Defense → DLA Aviation Oklahoma City

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of FD2030-26-01420.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FD2030-26-01420

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedApr 6

subcontract

Response DeadlineApr 6

Submission deadline

Response Deadline

04/06/2027, 04:00:00 PM UTCin 5 months

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Aviation Oklahoma City

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA Aviation Oklahoma City

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized inspection and testing of manufactured oxygen regulators for prime contractors on Air Force Sustainment Center F-15 aircraft projects. Conducts pressure and leak testing, verifies material certifications, and inspects parts against technical data packages using calibrated measurement tools in oxygen-safe environments. Requires AS9100 certification. Delivers inspection reports and test certificates.

Similar Contracts

Same NAICS industry code

Construction Aggregate TestingThis subcontract for Construction Aggregate Testing, managed by the California Department of General Services, involves providing specialized testing services for aggregates used in roads, curbs, walkways, and paving on CALFIRE facility projects. The selected contractor will be responsible for performing sampling and laboratory testing, utilizing laboratory scales and sieve analysis equipment to ensure all materials align with project design documents. The primary deliverable for this engagement is the provision of detailed aggregate quality and gradation reports. The project is located in San Diego and falls under NAICS code 541380. Interested parties must submit their responses by the deadline of November 24, 2026. This opportunity is designed to support prime contractors in maintaining quality control and regulatory compliance for critical infrastructure improvements within the CALFIRE network.

California Department of General Services

POSTED

about 8 hours ago

DEADLINE

Nondestructive Testing (NDT) ServicesThis subcontract for Nondestructive Testing (NDT) Services involves performing specialized inspections on structural elements for prime contractors working on CALFIRE facility projects. The primary objective is to detect internal flaws using ultrasonic, radiographic, or magnetic particle testing equipment. The selected provider is responsible for delivering detailed NDT certification reports and comprehensive flaw analysis to ensure structural integrity. The project is managed through the California Department of General Services and will be performed in San Diego. To qualify, personnel must hold an NDT Level II certification or higher in accordance with ASNT CP-189 standards. Interested parties should note the response deadline of November 24, 2026, and the associated NAICS code 541380.

California Department of General Services

POSTED

about 8 hours ago

DEADLINE

Structural Steel, Bolting, and Welding InspectionThis subcontract opportunity, managed by the California Department of General Services, involves providing specialized visual and technical inspections for structural steel, welding, and high-strength bolting on CALFIRE facility projects located in San Diego. The selected contractor will be responsible for utilizing welding gauges and torque wrenches to ensure structural integrity, ultimately delivering detailed welding inspection reports and bolting torque logs to the prime contractor. To qualify for this engagement, personnel must hold both AWS Certified Welding Inspector and ICC Structural Steel and Welding Inspector certifications. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline set for November 24, 2026.

California Department of General Services

POSTED

about 8 hours ago

DEADLINE

Concrete and Reinforcing Steel Special InspectionThis subcontract for Concrete and Reinforcing Steel Special Inspection involves providing specialized inspection and testing services for prime contractors on CALFIRE facility projects in San Diego. The scope of work includes inspecting reinforcing steel placement and performing concrete sampling and testing for structures such as barracks, apparatus bays, and generator buildings. Required deliverables include concrete strength reports and reinforcing steel inspection checklists, utilizing tools such as concrete cylinders, slump cones, and compression testing machines. Qualified providers must hold ICC Reinforced Concrete Special Inspector and ACI certifications to ensure compliance with project standards. This opportunity is managed through the California Department of General Services under NAICS code 541380. The response deadline for this solicitation is November 24, 2026.

California Department of General Services

POSTED

about 8 hours ago

DEADLINE

Soils Inspection and Density TestingThis subcontract, managed by the California Department of General Services, involves providing specialized soils inspection and density testing for a CALFIRE facility project, specifically a fire station replacement in Potrero, California. The selected contractor will perform both field and laboratory testing of soils to support prime contractors during critical phases of construction, including clearing, grading, and foundation preparation. All work must be conducted in accordance with ASTM D 3740 standards, utilizing nuclear gauges and laboratory soil testing apparatus to ensure structural integrity. The contractor is responsible for delivering detailed soil density test reports and comprehensive inspection logs. This opportunity falls under NAICS code 541380 and was posted on October 28, 2026, with a response deadline of November 24, 2026. While the project is located in Potrero, the place of performance is listed within San Diego.

California Department of General Services

POSTED

about 8 hours ago

DEADLINE

Environmental Analytical Testing ServicesThis subcontract for Environmental Analytical Testing Services supports prime contractors working on research and enforcement projects for the California Department of Fish & Wildlife. The scope of work involves performing specialized analytical testing on water and waste samples, specifically focusing on nutrient analysis, turbidity, BOD, COD, and low-level cleanups for pesticides, PAHs, and SVOCs. All work must be performed in accordance with EPA and SW-846 standards, and the provider is required to maintain ELAP certification to deliver Level II and Level IV analytical reports. The project is categorized under NAICS code 541380 and is designated for performance in Amador. Interested parties should note that the response deadline is November 17, 2026. This opportunity is managed through the Cal eProcure system for the state of California.

California Department of Fish & Wildlife

POSTED

about 8 hours ago

DEADLINE

MT&IS POTRERO FIRE STATION- FACILITY REPLACEMENT

Solicitation # RESD-PMDB 2026-12

The California Department of General Services, Real Estate Services Division, is soliciting professional Materials Testing and Inspection Services (MT&IS) for the replacement of the Potrero Fire Station for CALFIRE in San Diego County. The project involves the construction of a standard two-engine fire station on a site of approximately seven acres, with a total estimated construction cost of $23,587,800.00. The selected contractor will be responsible for providing all labor, equipment, and insurance for field laboratory testing, including inspections of soils, reinforcing steel, structural steel, aggregate, and concrete. All services must be managed through CIMB's Procore software and comply with LEED standards and specific technical certifications, such as ASTM D 3740 for soil testing and ASNT CP-189 for nondestructive testing. The contract is estimated to last twenty-four months, with a ten percent retention held for all progress payments. Selection is based on a two-step process involving a written Statement of Qualifications (SOQ) and oral interviews for a short list of typically three firms. Evaluation criteria focus on the experience of the firm, principals, and key personnel, as well as quality control and testing methodologies. Interested firms must submit their SOQ in PDF format via the designated DGS Box.com site by November 23, 2026. Required documentation includes Federal Form SF330, a letter of interest with a Federal Identification Number, and proof of California professional licensing and DIR registration. The final contract will be based on negotiated fixed rates for specific employee classifications and services.

California Department of General Services

POSTED

about 8 hours ago

DEADLINE

Invitation For Bid P2675010, Analytical Testing Services

Solicitation # P2675010

The California Department of Fish and Wildlife (CDFW) is seeking a contractor to provide analytical testing services to support the Office of Spill Prevention Response Laboratory Program. The primary objective is to establish contingency capacity for water quality and nutrient analysis, ensuring continuity of services during catastrophic instrument failures or providing testing capabilities not available in-house. These services support research studies with partner state agencies and enforcement actions aimed at protecting state waters and identifying pollutants that impact wildlife. The contract has a maximum value of 31,000.00 dollars, and the award will be granted to the lowest responsive and responsible bidder. Eligible contractors must possess California Environmental Laboratory Accreditation Program (ELAP) certification, particularly for wastewater and hazardous waste testing. Bidders are required to provide a Quality Assurance Manual, Method Detection Limits, and reporting limits for all parameters. The submission process requires several certifications, including the Darfur Contracting Act and the Bidder Declaration Form, with a deadline of November 16, 2026. Preferences and incentives are available for certified Small Businesses and Disabled Veteran Business Enterprises (DVBE), including a 5% bidding preference for small businesses and specific incentive rates for DVBE participation. The contractor is responsible for providing all pre-cleaned sample containers and preservatives, with these costs included in the quoted price.

California Department of Fish & Wildlife

POSTED

about 8 hours ago

DEADLINE

NDT Inspection for Cam AssemblyThis subcontract involves providing Non-Destructive Testing services for prime contractors supporting DLA Weapons Support ASC aerospace projects. The scope of work focuses on conducting structural integrity inspections of forged and machined cam assemblies utilizing ultrasonic, radiographic, or penetrant methods. All work must be performed in accordance with RQ040 NDT Accreditation Requirements, and the contractor is responsible for delivering certified inspection reports. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Tinker AFB. Interested parties should note the response deadline of November 5, 2026, and the classification of the work under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

First Article Testing and Material Certification ServicesThis subcontract opportunity is for the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division, to provide independent testing and validation services for prime contractors. The selected provider will perform First Article Testing on three initial units to verify compliance with Drawing 77445 specifications using specialized metrology and materials testing equipment. The scope of work includes coordinating with a Quality Assurance Representative for point-of-origin inspections and delivering a certified First Article Test Report. The project is a total small business set-aside under NAICS code 541380 and will be performed at Tinker AFB. To be eligible, the contractor must hold ISO/IEC 17025 accreditation. Interested parties must respond by November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

Third-Party Inspection and CertificationThis subcontract for Third-Party Inspection and Certification supports the Department of Defense at the Jacksonville Building. The selected provider will perform final inspections and quality validation for prime contractors delivering aviation lighting for the DLA. Responsibilities include conducting functional testing and dimensional inspections using CMM and electrical test equipment to ensure compliance with TDP Rev A Gen 1, culminating in the delivery of certificates of conformance and detailed inspection reports. Critical requirements for this engagement include maintaining CMMC Level 2 certification and coordinating directly with the DCMA for source inspections. The project falls under NAICS code 541380 and is based in Jacksonville, Florida. Interested parties must respond by November 9, 2026.

JACKSONVILLE BLDG

POSTED

about 13 hours ago

DEADLINE

Specialized Testing Laboratory (First Article Test)This subcontract opportunity is for a Specialized Testing Laboratory to perform First Article Testing for prime contractors supporting DLA Weapons Support Land Supplier Operations. The selected provider will be responsible for testing two units using specialized shock and impact testing rigs to verify that performance metrics align with the provided technical data package. The final deliverable for this engagement is a certified FAT Test Report. The project is managed under NAICS code 541380 and will be performed in New Cumberland. Due to the nature of the work, the contractor must have access to ITAR and EAR export-controlled data, and ISO/IEC 17025 certification is preferred. Interested parties must respond by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 13 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA Aviation Oklahoma City

Same awarding agency

Manufacture and Supply of Wiring Harness, BRAN (P/N 6827055)This subcontract involves the manufacture and supply of Wiring Harness, BRAN (P/N 6827055) for Department of the Air Force T-56 platform projects. The selected provider is responsible for procuring all raw component parts, assembling the harnesses, and conducting rigorous inspection and testing in accordance with specified engineering data. Key requirements include the use of specialized testing equipment for electrical harness validation and the successful completion of a Source Approval Request package. Managed by DLA Aviation Oklahoma City under NAICS code 335911, the contract requires the final delivery of the completed wiring harnesses to Tinker AFB. The solicitation was posted on October 14, 2026, with a response deadline set for March 14, 2027.

Storage Battery Manufacturing

POSTED

DEADLINE

Precision Machined Components for Servocylinder AssemblyThis subcontract, managed by the DLA Aviation Oklahoma City for the Department of Defense, involves the production of precision machined components for servocylinder assemblies used on USAF B-1 aircraft platform projects. The scope of work includes the CNC milling and turning of cylinder barrels, pistons, and valve blocks to tight tolerances, as well as the provision of high-strength alloys and aerospace-grade seals and O-rings. All materials must be supplied with full traceability and mill test reports. To be eligible, providers must hold AS9100 or ISO 9001 certification and be capable of delivering either individual components or complete hardware kits. The opportunity was posted on October 14, 2026, with a response deadline of October 14, 2027. The contract falls under NAICS code 332710.

POSTED

DEADLINE

Servocylinder Assembly Manufacture (P/N: L5872400-021)This subcontract involves the manufacture of complete Servocylinder Assemblies for prime contractors supporting USAF B-1 aircraft platform projects. The scope of work includes the procurement and manufacture of component parts, assembly according to P/N L5872400-021 and NSN 1650-01-184-8758 specifications, and the execution of pressure and actuation testing using specialized rigs. The project demands high-precision machining and strict adherence to USAF aerospace quality standards to ensure the delivery of fully tested and packaged assemblies. Managed by the DLA Aviation Oklahoma City under the Department of Defense, the contract falls under NAICS code 336411. The solicitation was posted on October 14, 2026, with a response deadline set for October 14, 2027.

Aircraft Manufacturing

POSTED

DEADLINE

FD2030-26-02435

Solicitation # FD2030-26-02435

This Sources Sought notice, identified by solicitation number FD2030-26-02435, is a market research effort by the DLA Aviation Oklahoma City and the 421st SCMS to identify potential sources for the new manufacture of a Wiring Harness, Bran (Part Number 6827055, NSN 2925-00-627-5397OJ) for the T-56 platform. The scope of work includes the procurement of component parts, manufacture, inspection, testing, preservation, packaging, and shipping. This is a new spares buy with no repair requirement. The place of performance is Tinker AFB, OK. The government is seeking information from all business types, including large businesses and various small business categories under NAICS code 336320, to determine if the requirement can be a small business set-aside. Interested parties must provide detailed business information, including their CAGE code, UEI, and socioeconomic status, and must select the Add Me to Interested Vendors button on the posting. To be qualified, potential sources are required to complete a Source Approval Request package submitted via DoD SAFE and adhere to specific Qualification Requirements and the Engineering Data List. This notice is for market research only; it is not a formal request for proposal, and no funds are currently available for the information requested.

Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

DEADLINE

FD2030-27-00138

Solicitation # FD2030-27-00138

The Department of the Air Force, through the 423rd SCMS and DLA Aviation Oklahoma City, is conducting market research via a Sources Sought Synopsis under notice FD2030-27-00138. The objective is to identify potential sources for the new manufacture of Servocylinder Assemblies (NSN 1650-01-184-8758, Part Number L5872400-021) for the B-1 platform. The estimated requirement is for 18 units, with a minimum of 5 and a maximum of 27. This is a new spares buy and does not include a repair requirement. The scope of work encompasses the procurement and manufacture of component parts, inspection, testing, preservation, packaging, and shipping, as well as supply chain management and addressing diminishing manufacturing sources and material shortage issues. The place of performance is Tinker AFB, Oklahoma. Interested respondents must provide comprehensive business information, including their Unique Entity ID and ownership status, and certify their size status under NAICS code 336413. Potential sources are required to complete a Source Approval Request package as specified in the Qualification Requirements and Engineering Data List. The government is open to all business types, including large businesses and various small business categories. Responses must be submitted by September 2, 2026, to the designated workflow email, and the SAR package must be submitted electronically via DoD SAFE. This effort is for market research purposes only and does not constitute a formal solicitation or a contractual commitment.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Supply Chain and DMSMS ManagementThis subcontract, titled Supply Chain and DMSMS Management, supports prime contractors on Department of the Air Force 430th SCMS projects. The scope of work focuses on comprehensive supply chain management and the mitigation of Diminishing Manufacturing Sources and Material Shortages. Key responsibilities include executing logistics planning, production forecasting, and the procurement of long-lead time parts through the application of market intelligence tools. Managed under the DLA Aviation Oklahoma City within the Department of Defense, the contract requires the delivery of detailed procurement plans, forecasting reports, and the identification of sourced alternative materials. The opportunity is categorized under NAICS code 423840, with a response deadline set for October 13, 2027.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Preservation, Packaging, and LogisticsThis subcontract, titled Preservation, Packaging, and Logistics, involves providing specialized preservation, military-grade packaging, and shipping services for serviceable aircraft assets. Supporting prime contractors on Department of the Air Force 430th SCMS projects, the scope of work requires the application of military packaging standards and the use of specialized materials and logistics management software to ensure the secure transport of aircraft components to the government. Managed under the DLA Aviation Oklahoma City within the Department of Defense, the contract falls under NAICS code 488510. The solicitation was posted on October 13, 2026, with a response deadline set for October 13, 2027. The primary objective is the successful delivery of professionally packaged and shipped aircraft assets in accordance with strict military specifications.

Freight Transportation Arrangement

POSTED

DEADLINE

Aerospace Inspection and Testing ServicesThe Aerospace Inspection and Testing Services subcontract, managed by the DLA Aviation Oklahoma City under the Department of Defense, focuses on the quality assurance and validation of manufactured aircraft components for Department of the Air Force 430th SCMS projects. The scope of work involves utilizing precision measurement tools and testing rigs to verify that all components adhere to the Engineering Data List and Qualification Requirements before they are preserved and shipped. The primary deliverables for this engagement include detailed inspection reports and certified tested components. This effort falls under NAICS code 541380, with a response deadline set for October 13, 2027.

Testing Laboratories and Services

POSTED

DEADLINE

Aircraft Component Part ManufacturingThis subcontract, managed by DLA Aviation Oklahoma City for the Department of Defense, involves the manufacture of new aircraft component parts supporting Department of the Air Force 430th SCMS projects. The selected contractor is responsible for procuring raw materials and utilizing aerospace-grade manufacturing equipment to fabricate components in strict accordance with government engineering data and National Stock Numbers. Key deliverables include the completion of Source Approval Request packages that adhere to specific Qualification Requirements and Engineering Data Lists, culminating in the delivery of finished aircraft components. The opportunity is categorized under NAICS code 336411, with a response deadline set for October 13, 2027.

Aircraft Manufacturing

POSTED

DEADLINE

FD2030-27-00347

Solicitation # FD2030-27-00347

Contract FD2030-27-00347 is a special notice issued by the Department of Defense through DLA Aviation Oklahoma City. The procurement is for aircraft air seals, identified by NSN 2840-01-276-9822NZ and top drawing 4071088. The technical specifications are governed by EDL revision 19, dated March 26, 2026, and fall under MDC code WCD. The opportunity was posted on October 13, 2026, with a response deadline set for October 13, 2027. It is categorized under NAICS code 336412, which pertains to aircraft component manufacturing. Mick M. Moseley is listed as the primary IM name associated with this requirement.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

FD2030-27-00342

Solicitation # FD2030-27-00342

This special notice contract, identified by solicitation number FD2030-27-00342, is issued by the Department of Defense through DLA Aviation Oklahoma City. The procurement is for an electro-mechanical actuator under NSN 1680-01-077-3420RK, adhering to top drawing 16K0745-5 and EDL revision 16 dated October 13, 2026. The requirement is categorized under NAICS code 336413. The notice was posted on October 13, 2026, with a response deadline set for October 13, 2027. Michael M. Anderson is listed as the associated individual for this action, which is managed under the MDC code ELG.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

FD2030-26-02635

Solicitation # FD2030-26-02635

This special notice, identified by solicitation number FD2030-26-02635, is issued by the Department of Defense through DLA Aviation Oklahoma City. The contract pertains to the procurement of a turbine shroud segment, categorized under NSN 2840-01-318-7541NZ and top drawing 4076475-02. Technical specifications are governed by EDL revision 8, dated September 26, 2024, with the project falling under NAICS code 336412. The opportunity was posted on October 13, 2026, and establishes a response deadline of October 13, 2027. Administrative oversight for this requirement is managed by Mathew E. Raugust under MDC code W9H.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

F--Grand Canyon National Park Water & Wastewater Lab

Solicitation # 140P1526Q0044

Imr ARIZONA(12400)

POSTED

CLOSED

Rock sample preparation

Solicitation # 140G0326Q0083

Office Of Acquisiton Grants

POSTED

CLOSED

Calibration Services for Support Equipment

FA8128 Afnwc Pzn

POSTED

CLOSED

Third-Party Testing of Ferroniobium Material

Dcso Columbus Division #3

POSTED

DEADLINE

F999--Landauer Dosimetry Services - Omaha VA

Solicitation # 36C26326Q0531

Network Contract Office 23 (36C263)

POSTED

CLOSED

W56HZV23D0001 ATD SUPPORT RFI

Solicitation # W56HZV23D0001_ATD_SUPPORT_RFI

POSTED

CLOSED

Solicitation # W9127N-26-Testing

W071 Endist Portland

POSTED

CLOSED

Textile Weathering Lab Equipment Maintenance and Service (TMET)

Solicitation # W911QY-26-R-TEXTILE

W6QK Acc-Apg Natick

POSTED

CLOSED

USAFSAM/OE Water Testing

Solicitation # COMBO-AFRL-PZLEQ-2026-0009

FA2396 USAF Afmc Afrl Pzl Afrl Pzle

POSTED

CLOSED

H146--Critical SPS Water Testing Milwaukee VAMC and Green Bay CBOC 695C60326

Solicitation # 36C25226Q0092

252-NETWORK Contract Office 12 (36C252)

POSTED

DEADLINE

Q301-- Pharmacy Gloved Fingertip and Media Filled Testing

Solicitation # 36C25626Q0509

256-NETWORK Contract Office 16 (36C256)

POSTED

CLOSED

Sediment sample preparation

Solicitation # 140G0326Q0078

Office Of Acquisiton Grants

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS