Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aerospace Finishing and Quality Validation for Actuating Caps

Active

Federal

Response Deadline10/16/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing specialized aerospace finishing and quality validation for actuating caps to support the DLA Weapons Support ASC Supplier Oper AE and AF Division. The scope of work requires the application of aerospace-grade coatings and plating in strict accordance with TDP Rev A Gen 1. To ensure precision and compliance, the contractor must utilize CMM and NDT equipment while performing inspections based on zero-based sampling plans MIL-STD-1916 or ASQ H1331. The project is performed at Hill AFB and mandates full adherence to the DLA Master List of Technical and Quality Requirements. The primary deliverables include coated components and certified inspection reports. Interested parties must respond by October 16, 2026, under NAICS code 332813.

General Info

Aerospace finishing and quality validation for actuating caps at Hill AFB by October 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

HILL AFB, UT, 84056-5734, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-27-T-0425.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CAP, LINEAR ACTUATING C

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 8

subcontract

Response DeadlineOct 16

Submission deadline

Response Deadline

10/16/2026, 05:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs surface treatments and quality validation for prime contractors on DLA Weapons Support ASC projects. Applies aerospace-grade coatings and plating per TDP Rev A Gen 1 and performs inspection using zero-based sampling plans MIL-STD-1916 or ASQ H1331. Utilizes CMM and NDT equipment. Requires compliance with DLA Master List of Technical and Quality Requirements. Delivers certified inspection reports and coated components.

Similar Contracts

Same NAICS industry code

Hot-Dip Galvanizing and Metal CoatingThis subcontract involves providing hot-dip galvanizing and industrial coating services for prime contractors working on City of Greensboro infrastructure projects. The scope of work focuses on preventing corrosion on catch basin tops through professional surface preparation via sandblasting and the application of zinc coatings. All work must be executed in strict accordance with ASTM A123 or other City of Greensboro Standard 412 requirements to ensure the delivery of high-quality finished metal components. The opportunity is categorized under NAICS code 332813 and is associated with the City of Greensboro in North Carolina. Interested parties should note the tight response window, with the solicitation posted on October 12, 2026, and a response deadline of October 14, 2026.

City of Greensboro

POSTED

about 20 hours ago

DEADLINE

Manganese Phosphate Coating ServicesThis subcontract for Manganese Phosphate Coating Services involves performing specialized chemical coatings on fabricated gun parts for prime contractors supporting DLA Weapons Support. The selected provider must apply manganese phosphate coatings according to specific drawing specifications to ensure metal components meet all required corrosion and wear standards. Performance of this work requires the use of industrial phosphate plating tanks and is subject to inspection by the DCMA QAR. Eligible contractors must be ITAR registered and receive formal approval from the Contracting Officer. The work is associated with NAICS code 332813 and will be performed in Tracy, California. Interested parties must respond by October 22, 2026, to provide these essential services for the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Aerospace Industrial Painting and FinishingThis subcontract for Aerospace Industrial Painting and Finishing involves providing professional painting services for aircraft towbars supporting prime contractors on DLA Troop Support projects. The scope of work requires the surface preparation and application of FED-STD-595 White aerospace paint using industrial spray booths, with a final delivery of six white-painted towbars. All work must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards to ensure proper coating thickness, adhesion, marking, and packaging. Managed by the Department of Defense under Construction and Equipment MRO SVC I, this opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813. The solicitation was posted on October 9, 2026, with a response deadline of October 16, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing involves providing specialized surface treatments and anti-corrosion coatings for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work focuses on applying aerospace-grade plating and chemical treatments to torque tube components in strict accordance with Boeing technical specifications. To ensure the complete absence of corrosion and maintain high quality standards, the contractor must utilize industrial plating baths and surface roughness testers. The final deliverable consists of finished, coated components that are ready for final assembly. This opportunity is categorized under NAICS code 332813 and was posted on October 9, 2026, with a response deadline of October 16, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Aerospace Component Finishing and PlatingThis subcontract, titled Aerospace Component Finishing and Plating, is issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division. The project requires the application of aerospace-approved surface treatments and plating, specifically anodizing or passivating, for machined shafts according to P/N 257733 specifications. The selected contractor is responsible for delivering finished coated shaft components and must perform rigorous quality control, including surface roughness testing and coating thickness verification. A critical requirement for this contract is that the provider must hold NADCAP accreditation for special processes. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813. Interested parties must submit their responses by October 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Precision Surface Coating and PlatingThis subcontract for Precision Surface Coating and Plating supports the Department of Defense through the DLA Weapons Support Fluid Handling Division. The selected provider will apply specialized surface coatings and plating for prime contractors, ensuring all components meet a 16 RMS surface finish and adhere to strict corrosion and wear specifications. To maintain environmental standards, all plating processes must be performed without the use of Class I Ozone Depleting Chemicals. Eligible contractors must hold US/Canada Joint Certification Program certification and maintain full compliance with ITAR and EAR regulations. This opportunity falls under NAICS code 332813, with a response deadline set for October 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Heat Treating and Surface Hardness ServicesThis subcontract for Heat Treating and Surface Hardness Services supports prime contractors on projects for the Department of Defense DLA Weapons Support Fluid Handling Division. The scope of work involves providing specialized thermal processing for metal components, specifically focusing on heat treating, stress relieving, and shot peening, as well as performing Rockwell surface hardness testing. All delivered components must be accompanied by the appropriate process certifications to ensure quality and compliance. To be eligible for this contract, providers must maintain US/Canada Joint Certification Program certification and strictly adhere to ITAR and EAR compliance regulations. The opportunity is categorized under NAICS code 332813, with a response deadline set for October 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Aerospace Plating and Coating ServicesThe Aerospace Plating and Coating Services subcontract involves providing specialized surface treatments for machine bolts on DLA Aviation Supply Chain projects. The scope of work requires the application of ASTM B633 Type II FE/ZN 5 zinc plating and SAE AMS-QQ-P-416 chemical conversion coatings, with a focus on verifying coating thickness and adherence to strict aviation standards using industrial plating tanks. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332813. Due to the nature of the Department of Defense project, the contractor must maintain CMMC Level 2 certification and ensure full ITAR and EAR compliance. All delivered components must meet the specified ASTM and SAE standards.

AVIATION SUPPLY CHAIN

POSTED

DEADLINE

CLEANING SOLVENT, GE

Solicitation # SPE8E5-26-T-4488

Solicitation SPE8E5-26-T-4488 is a fixed-price request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of 25 boxes of Cleaning Solvent, GE, identified by NSN 7930-01-367-0995. This acquisition is an Foreign Military Sales requirement for the Hellenic Air Force in Greece, with an original required delivery date of July 10, 2025. The product must adhere to technical standard SAE AMS3167 Revision B and is classified as a Type I Code H item with a non-extendable shelf life of 12 months. Delivery is specified as FOB Origin, with both inspection and acceptance occurring at the point of origin. The contract mandates strict compliance with hazardous material regulations, requiring labeling in accordance with the Hazard Communication Standard and shipping per IP025. Packaging must follow MIL-STD-2073-1E and MIL-STD-129, with palletization meeting DLA requirement RP001. Offerors must comply with the Buy American Act and Berry Amendment, disclosing any non-domestic materials used. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment requests. The solicitation is categorized under NAICS 332813 and incorporates various FAR and DFARS clauses regarding cybersecurity, sustainable products, and the prohibition of hexavalent chromium.

Defense Logistics Agency

POSTED

DEADLINE

Aerospace Valve Plating and Hardness TreatmentThis subcontract for Aerospace Valve Plating and Hardness Treatment supports prime contractors on DLA Aviation projects under the Department of Defense. The scope of work involves providing specialized plating and hardness treatments for regulating valve components, specifically applying coatings according to drawing 19-40763. The selected provider must perform hardness testing and non-destructive testing of treated surfaces using industrial plating baths and NDT equipment. To ensure quality and compliance, the contractor is required to hold ISO 9001 certification, and Nadcap certification may also be necessary. The final deliverables consist of plated and hardness-treated valve components. This opportunity was posted on October 9, 2026, with a response deadline of October 20, 2026, falling under NAICS code 332813.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Aerospace Surface Treatment and CoatingThis subcontract opportunity with the Department of Defense for DLA Aviation at Oklahoma City involves providing specialized surface treatments, coatings, or plating for Cold Section Module components. The selected contractor will be responsible for applying aerospace-grade finishes to part number 4089012-800 in accordance with the provided technical data package, utilizing industrial coating lines, plating baths, or thermal spray equipment to deliver components ready for final assembly. To be eligible for this project, contractors must hold AS 9100 and NADCAP certifications. The solicitation was posted on October 9, 2026, with a response deadline of November 12, 2026. The work falls under NAICS code 332813, focusing on high-standard aerospace surface processing for prime contractors.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

in about 1 month

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing supports DLA Aviation accessory gearbox projects through the Department of Defense. The scope of work involves performing specialized surface treatments and coatings for prime contractors, specifically focusing on chemical cleaning, anodizing, and the application of aerospace-approved coatings to AMS 4215 aluminum surfaces. These processes are executed using dedicated anodizing tanks and curing ovens to deliver finished gearbox components. To qualify for this engagement, providers must maintain rigorous industry certifications, including AS 9100, ISO 9001:2000, and NADCAP. The opportunity was posted on October 9, 2026, with a response deadline of November 12, 2026. The project falls under NAICS code 332813 and is managed by the DLA Aviation office in Oklahoma City.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Weapons Support ASC projects for the Department of Defense. The scope of work involves specialized packaging, preservation, and marking of items in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The contractor must utilize MIL-SPEC compliant wraps and industrial marking equipment while ensuring that no mercury compounds are used in the process. All finished products are to be delivered packaged and marked for FOB Destination. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 488410. It was posted on October 12, 2026, with a response deadline of October 26, 2026. The contract is managed by the DLA Weapons Support ASC Supplier Oper AE and AF Division.

Motor Vehicle Towing

POSTED

about 15 hours ago

DEADLINE

Socket Head Cap Screw Manufacturing (NSN 5305-00-983-7424)This subcontract involves the precision manufacturing of socket head cap screws, specifically NSN 5305-00-983-7424, for prime contractors supporting DLA Weapons Support ASC projects. The manufacturer must utilize precision machining equipment to ensure all products comply with FF-S-86J Revision J and NAS1351 Revision 11 standards. Strict quality assurance is required per MIL-STD-1916 or ASQ H1331, with a mandatory requirement for zero mercury content and the provision of certifications of compliance upon delivery. The opportunity is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div and is designated as a Total Small Business Set-Aside. Falling under NAICS code 332994, the solicitation was posted on October 12, 2026, with a response deadline of October 26, 2026.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 15 hours ago

DEADLINE

Defense-Compliant Packaging and Marking ServicesThis subcontract opportunity, titled Defense-Compliant Packaging and Marking Services, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The project requires a provider to perform specialized packaging and marking for prime contractors fulfilling DLA supply contracts. The scope of work involves packaging hardware according to ASTM D3951 and RP001 standards and applying markings that comply with MIL-STD-129 and MIL-STD-130N. The selected contractor must utilize ASTM-certified materials and UID-compliant equipment, such as laser etchers, to ensure all products are finished and ready for FOB Destination. This is a Total Small Business Set-Aside under NAICS code 561910. The solicitation was posted on October 12, 2026, with a response deadline of October 23, 2026. Expertise in military-standard marking and packaging is essential for the successful execution of these requirements.

Packaging and Labeling Services

POSTED

about 15 hours ago

DEADLINE

Manufacture and Supply of Machine Screws (NAS1801)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC, requires the manufacture and supply of 50 precision machine screws, specifically Part Number NAS1801-4-10 (NSN 5305-01-183-5838). The contractor must adhere to TDP Rev A Gen 1 and NAS1801 Revision 4 standards, utilizing precision machining equipment to meet strict NAS tolerances. Quality assurance must be maintained through sampling and inspection conducted per MIL-STD-1916 or ASQ H1331. The contract is designated as a Total Small Business Set-Aside under NAICS code 332722. To be eligible and compliant, the provider must furnish a certification of conformance and maintain cybersecurity standards in accordance with DFARS 252.204-7012. The solicitation was posted on October 12, 2026, with a response deadline of October 23, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

SCREW, CAP, SOCKET HEAD

Solicitation # SPE4A7-27-R-X022

Solicitation SPE4A7-27-R-X022 is a Total Small Business Set-Aside issued by the Defense Logistics Agency for the procurement of one socket head cap screw, NSN 5305-00-983-7424. This is a Firm Fixed Price requirement with a delivery schedule of 50 days after receipt of order and FOB Destination terms. The item is classified as a critical application item and must comply with technical specifications FF-S-86J Revision J and NAS1351 Revision 11. The procurement may result in an Indefinite Delivery Contract with a base period of five years. Quality assurance is stringent, requiring sampling in accordance with MIL-STD-1916 or ASQ H1331, with acceptance based on zero non-conformances. Inspection and acceptance will occur at the point of origin. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, respectively, with a strict prohibition on the use of mercury or mercury compounds in the hardware, preservation, or packaging. Award evaluation will weigh quoted delivery and past performance, specifically SPRS assessments, equally. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE4A7-27-R-X019

Solicitation SPE4A7-27-R-X019 is a Total Small Business Set-Aside for a Firm Fixed Price Indefinite Delivery Contract with a five-year base period and no options. The procurement is managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div for the supply of machine screws, specifically NSN 5305-01-183-5838 (Part Number NAS1801-4-10). The required quantity is one package, defined as 50 units, with a delivery timeline of 90 days after receipt of order. Delivery, inspection, and acceptance are all designated as FOB Destination. Technical compliance requires adherence to TDP Rev A Gen 1 and NAS1801 Revision 4. Packaging must follow ASTM D3951 and RP001, while marking must comply with MIL-STD-129 and MIL-STD-130N. Quality assurance involves a zero-non-conformance acceptance policy, with sampling based on MIL-STD-1916 or ASQ H1331. Award determination will be based on a comparative assessment of price, past performance (heavily weighted by SPSR assessments), and quoted delivery. Contractors must utilize the Wide Area WorkFlow system for invoicing and payment and comply with various FAR and DFARS clauses, including cybersecurity requirements under DFARS 252.204-7012 and Buy American preferences.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

Preservation and Packaging Services for NSN 5365-01-233-7344This subcontract involves providing military-grade preservation, packaging, and marking services for 2,000 rings under NSN 5365-01-233-7344. The work is performed for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div, with final delivery destined for DLA Dist San Joaquin. The contractor must adhere to strict technical specifications, including MIL-PRF-23199 for preservation, MIL-STD-2073-1E for packaging, and MIL-STD-129 for marking. Additionally, the scope requires palletization according to RP001 and the use of cushioning as specified in MIL-STD-2073 Appendix J. The opportunity was posted on October 9, 2026, with a response deadline of October 23, 2026, under NAICS code 488510.

Freight Transportation Arrangement

POSTED

DEADLINE

Manufacturing of NSN 5365-01-233-7344 RingsThis subcontract involves the manufacture of 2,000 units of NSN 5365-01-233-7344 rings for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. The contractor is responsible for fabricating the rings to precise dimensions and tolerances as defined by DLA technical specifications, ensuring that no mercury is intentionally added to the components. Quality assurance is a critical component of the agreement, requiring zero-non-conformance sampling conducted in accordance with MIL-STD-1916 or ASQ H1331. The final delivery must include all 2,000 finished rings along with the necessary technical documentation. This opportunity falls under NAICS code 332999 and was posted on October 9, 2026, with a response deadline of October 23, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Military Grade Packaging and International ShippingThis subcontract involves providing specialized packaging, marking, and palletization services for prime contractors fulfilling DLA supply contracts. The scope of work requires strict adherence to military standards, specifically MIL-STD-2073-1E, MIL-PRF-23199, and MIL-STD-129 for packaging and marking, while palletization must comply with DLA requirement RP001. The contractor is responsible for using approved preservatives and wrapping materials to ensure components are secure for international transit to the US Naval Base Sasebo in Japan. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract focuses on the delivery of fully packaged and marked rings on an FOB Origin basis. The project falls under NAICS code 488510, with a response deadline set for October 23, 2026.

Freight Transportation Arrangement

POSTED

DEADLINE

Precision Machined Ring (NSN 5365-01-233-7344)This subcontract involves the manufacture and supply of three precision machined rings, identified as NSN 5365-01-233-7344, for prime contractors supporting the Department of Defense DLA Weapons Support ASC. The components must be fabricated according to Bird-Johnson Propeller Company PN 106057055 specifications using precision machining equipment suitable for critical application items. The contractor is required to maintain strict quality control and sampling methods in adherence to MIL-STD-1916 or ASQ H1331 and must ensure all units are mercury-free. This procurement falls under NAICS code 332710, with a response deadline set for October 23, 2026.

POSTED

DEADLINE

Supply of Ring (NSN 5365-01-233-7344)This subcontract involves the procurement and delivery of two aircraft ring components, identified by Part Number 106057055 and NSN 5365-01-233-7344, for the Department of Defense under the DLA Weapons Support ASC. The components must be sourced from or manufactured according to Bird-Johnson Propeller Company, LLC specifications and delivered to the US Naval Base Sasebo in Japan. The contract mandates strict quality control and safety standards, requiring mercury-free materials and zero non-conformance sampling in accordance with MIL-STD-1916 or ASQ H1331. This effort falls under NAICS code 336413 and is managed by the DLA Weapons Support ASC Supplier Oper AE and AF Division.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

OXYGEN SYSTEM, AIRCR

Solicitation # SPE4A7-27-T-0027

Solicitation SPE4A7-27-T-0027 is a Service-Disabled Veteran-Owned Small Business set-aside issued by the DLA Weapons Support ASC Supplier Oper AE and AF Div for the procurement of two aircraft oxygen systems. The required item is a Portable Oxygen Charging Unit, specifically Haskel International LLC part number J24273-AG-75 (NSN 1660-01-733-7221). A critical requirement for this application is that the units must be cleaned for oxygen service in accordance with MIL-STD-1330. Delivery is required within 20 days after receipt of order, with an original required delivery date of February 23, 2026, shipped FOB Origin to the Naval Special Warfare Group 8 in Pearl City, Hawaii. The contract mandates strict quality and packaging standards, including marking and bar-coding per MIL-STD-129 and kit packaging according to MIL-STD-2073-1 Appendix D. Inspection and acceptance will occur at the destination, with sampling conducted via MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan. Administrative requirements include the use of Wide Area WorkFlow for invoicing and compliance with the Buy American Act and Berry Amendment. All quotations must be submitted via the DLA Internet Bid Board System by October 9, 2026.

Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS