Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aerospace-Grade Raw Material Supply for Retaining Rings

Active

Federal

Response Deadline10/16/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of aerospace-grade raw alloy or wire stock intended for prime contractors supporting the DLA Weapons Support ASC. The materials must strictly adhere to the chemical and physical properties specified in drawing 19207 11668650 to ensure suitability for critical application hardware, specifically retaining rings. To maintain full traceability and quality assurance, the supplier is required to provide Material Test Reports and Certificates of Conformance with all deliveries. Additionally, the contractor must comply with all DFARS domestic material restrictions. Performance for this contract is centered in New Cumberland, Pennsylvania.

General Info

Supply aerospace alloy for DLA retaining rings per drawing 19207 11668650 and DFARS.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

332618 - Other Fabricated Wire Product Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-1175.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RING, RETAINING

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 8

subcontract

Response DeadlineOct 16

Submission deadline

Response Deadline

10/16/2026, 05:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies raw alloy or wire stock for prime contractors delivering DLA Weapons Support ASC hardware. Provides materials meeting chemical and physical properties of drawing 19207 11668650. Delivers Material Test Reports (MTRs) and Certificates of Conformance (CoC) ensuring full traceability for critical application hardware. Must comply with DFARS domestic material restrictions. Delivers certified raw material stock.

Similar Contracts

Same NAICS industry code

WIRE ROPE ASSEMBLY,

Solicitation # SPE4A7-27-T-0071

Solicitation SPE4A7-27-T-0071 is a fixed-price request for quotations issued by the DLA Weapons Support ASC for the procurement of 26 single leg wire rope assemblies, identified by NSN 4010-00-704-3894. The requirement specifies a delivery timeframe of 57 days after receipt of order, with a need ship date of December 6, 2026, and a final required delivery date of March 6, 2027. Delivery is designated as FOB Destination Other, with the consignee being the DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict compliance with several technical and security standards, including CMMC Level 2 certification via a Certified Third-Party Assessment Organization and adherence to ISO 9001:2015 quality standards. Due to the nature of the technical data, offerors must possess an approved US/Canada Joint Certification Program certification to access export-controlled information subject to ITAR or EAR. Additionally, the procurement incorporates the Buy American Act and Berry Amendment restrictions, prohibits the use of additive manufacturing, and requires the use of the Wide Area WorkFlow system for electronic invoicing and payment processing. Inspection and acceptance will occur at the point of origin.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

PIN, STRAIGHT, HEADLE

Solicitation # SPE4A6-27-T-0076

Solicitation SPE4A6-27-T-0076 is a fixed-price request for quotation issued by the DLA Weapons Support ASC Commodities Division for the procurement of one straight headle pin, identified by NSN 5315-01-681-8459. The contract requires delivery within 20 days after receipt of order to a destination in Mechanicsburg, Pennsylvania, with shipping terms set as FOB Origin. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. The procurement includes stringent technical and security requirements, including CMMC Level 2 certification and compliance with ITAR or EAR export controls for technical data. Quality assurance must follow MIL-STD-1916 or ASQ H1331 zero-based sampling plans. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for bare item marking. Additionally, the government prohibits the use of additive manufacturing for this item and provides a price evaluation preference for certified HUBZone Small Business Concerns. All invoicing and payment requests must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

PIN, STRAIGHT, HEADED

Solicitation # SPE4A6-27-T-1310

Solicitation SPE4A6-27-T-1310 is a fixed-price contract issued by the DLA Weapons Support ASC Commodities Division for the procurement of one straight headed pin. This item is designated as a critical application item, identified by NSN 5315015845028 and John Deere Shared Services part number 4662721. The required delivery date is September 30, 2026, with a delivery window of 10 days after order. Shipping is established as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the USA Engineer School at Fort Leonard Wood, Missouri. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific provisions for source approval, packaging, and bare item marking. Packaging must comply with ASTM D3951 and MIL-STD-129, while sampling must follow MIL-STD-1916 or ASQ H1331. Quality attributes are categorized as critical, major, or minor with corresponding AQL levels of 0.1, 1.0, and 4.0. Administrative requirements include the use of the Wide Area WorkFlow system for electronic payments and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic material restrictions, and the prohibition of additive manufacturing unless authorized.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-1255

Solicitation SPE4A6-27-T-1255 is a fixed-price requirement issued by the DLA Weapons Support ASC Commodities Division for the procurement of 15 lock pins (NSN 5315-01-628-2322). This is a source-controlled item that must be manufactured and tested according to cited limited rights data, specifically referencing Reid Supply Company part number MK-MK-10 and basic drawing 5B5M3 11B5190376 Revision B. Delivery is required within 10 days after receipt of order, with an original required delivery date of June 5, 2025, shipped FOB Origin to the 1AD Sustainment Brigade SSA at Fort Bliss, Texas. Shipping must be conducted via traceable means, and parcel post is strictly prohibited. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Inspection and acceptance will occur at the destination per FAR 52.246-2, utilizing a zero-based sampling plan in accordance with MIL-STD-1916 or ASQ H1331. Contractors must utilize the Wide Area WorkFlow system for invoicing and payment requests. Key regulatory compliance includes DFARS requirements for safeguarding covered defense information, prohibitions on hexavalent chromium, and adherence to the Buy American Act and Berry Amendment. All quotes must be submitted through the DLA Internet Bid Board System.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

PIN, QUICK RELEASE

Solicitation # SPE4A6-27-T-1193

Solicitation SPE4A6-27-T-1193 is a fixed-price procurement issued by the DLA Weapons Support ASC Commodities Division for 31 quick release pins, identified by NSN 5315-01-609-2876. This requirement is a total small business set-aside under NAICS code 332618. The contract specifies a need ship date of June 6, 2027, with an original required delivery date of October 31, 2027. Delivery is managed under the First Destination Transportation program with FOB Origin terms, and both inspection and acceptance will occur at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Palletization must comply with RP001 requirements. Invoicing and receiving reports are to be processed electronically through the Wide Area WorkFlow system. The solicitation incorporates various FAR and DFARS clauses, including mandates for the Buy American Act, the Berry Amendment, and cybersecurity safeguarding under DFARS 252.204-7012. All quotes must be submitted via the DLA Internet Bid Board System.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

ENERGY CHAIN, LINK

Solicitation # SPE4A5-27-T-0305

Solicitation SPE4A5-27-T-0305 is a fixed-price requirement issued by the DLA Weapons Support ASC Supplier Oper OEM Division for the procurement of eight energy chain links, identified by NSN 4010992126988. The items are designated as critical application items, specifically associated with KNDS Defence UK Limited part numbers G414/4925 and G414/4925/5. Delivery is required within 10 days after order, with an original required delivery date of September 30, 2026. Shipping is established as FOB Origin, with the final destination for inspection and acceptance located in Sault Sainte Marie, Michigan. The contract mandates strict adherence to DLA technical and quality requirements, including specific sampling methods per MIL-STD-1916 or ASQ H1331 and packaging standards according to ASTM D3951 and MIL-STD-129. Palletization must comply with RP001. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The solicitation is governed by various FAR and DFARS clauses, including those regarding cybersecurity safeguarding, the Buy American Act, and the prohibition of hexavalent chromium. Quotes must be submitted via the DLA Internet Bid Board System.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

PIN, STRAIGHT, HEADLESS

Solicitation # SPE4A6-27-T-1319

Solicitation SPE4A6-27-T-1319 is a fixed-price requirement issued by the DLA Weapons Support ASC Commodities Division for the procurement of 108 straight, headless pins, identified as NSN 5315000526632. This item is classified as a commercial item and must adhere to technical data P/N MS9105-63. The required delivery date is May 7, 2027, with shipping and acceptance occurring FOB Origin. Delivery is destined for the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict quality and packaging standards, requiring compliance with SAE AS9003 or ISO 9001 for the manufacturer's inspection system. Inspection and acceptance are conducted at the origin using zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Packaging must follow ASTM D3951 and RP001, with marking and labeling adhering to MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS 252.204-7012 for cybersecurity. Additionally, the solicitation provides a price evaluation preference for certified HUBZone Small Business Concerns.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

PIN, GROOVED, HEADED

Solicitation # SPE4A0-27-T-0147

Solicitation SPE4A0-27-T-0147 is a request for quotations issued by the DLA Weapons Support Aviation Supply Chain ESOC Buys for the procurement of one grooved, headed pin, identified by NSN 5315-01-650-1734. The item is subject to strict export controls under ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed DLA export-control training to access technical data. Delivery is required by October 6, 2026, to Joint Base Elmendorf Richardson in Alaska, with offers submitted on an FOB Origin basis. The contract mandates compliance with MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, with destination inspection and acceptance governed by FAR 52.246-2. Payment and receiving reports must be processed electronically via the Wide Area WorkFlow system. Key regulatory requirements include adherence to the Buy American Act, the Berry Amendment, and CMMC Level 2 cybersecurity standards. Additionally, a price evaluation preference is available for SBA-certified HUBZone Small Business Concerns.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

PIN, AIRCRAFT, MATERI

Solicitation # SPE4A7-27-T-0448

Solicitation SPE4A7-27-T-0448, issued by the Defense Logistics Agency (DLA) Weapons Support ASC Supplier OE and AF Div, is for the procurement of 31 aircraft material pins (NSN 5315-01-474-1092). The requirement is issued under the First Destination Transportation program with delivery terms set as FOB Origin. The delivery schedule specifies a 206-day after date order period, with a need ship date of May 11, 2027, and a final required delivery date of October 31, 2027. Performance will be delivered to DLA Distribution Cherry Point in North Carolina. The contract mandates strict adherence to quality and security standards, requiring the manufacturer's inspection system to comply with ISO 9001:2015 or an equivalent standard. Technical and quality requirements are governed by the DLA Master List, including CMMC Level 2 certification and specific packaging and marking standards such as ASTM D3951 and MIL-STD-129. Due to the nature of the material, the contract includes stringent export control requirements under ITAR and EAR, as well as DFARS 252.225-7048. Additionally, the government will not evaluate offers utilizing additive manufacturing. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The solicitation provides a price evaluation preference for certified HUBZone Small Business Concerns. Compliance with the Buy American Act and the Berry Amendment is required, and offerors must disclose any use of non-domestic materials. Inspection and acceptance will occur at the point of origin.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE4A0-27-T-0156

Solicitation SPE4A0-27-T-0156 is a fixed-price request for the procurement of one machine key, identified by NSN 5315-01-584-3331 and reference part HDT Expeditionary Systems Inc 92878 P/N 1005075. Issued by the DLA Weapons Support Aviation Supply Chain ESOC Buys, the requirement is classified as a commercial item under NAICS code 332618. The delivery is required within five days after receipt of order, with a required delivery date of October 6, 2026, shipped FOB Origin to a destination in South Korea. Quotations are due by October 16, 2026. The contract mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and RP001 for palletization, and MIL-STD-129 for marking and labeling. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements and TDP Rev A Gen 1. Offerors proposing alternate parts must submit a complete data package for evaluation. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, hazardous material labeling, and the Buy American Act. Inspection and acceptance will occur at the destination.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

PIN, GROOVED, HEADLES

Solicitation # SPE7M0-27-T-0245

Solicitation SPE7M0-27-T-0245 is a fixed-price request for quotations issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for the procurement of 12 grooved, headless pins (NSN 5315-01-598-4588). The items are to be delivered to the Norfolk Naval Shipyard in Portsmouth, Virginia, by March 12, 2026, using the fastest traceable means. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2, with sampling conducted per MIL-STD-1916 or ASQ H1331. The contract mandates strict adherence to RP001 packaging requirements and prohibits the use of mercury or mercury compounds in any preservation or marking activities. Due to the nature of the technical data, this procurement is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specialized training. Additionally, offerors must comply with the Buy American Act and the Berry Amendment, and must disclose any use of non-domestic materials. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-0870

Solicitation SPE7L1-27-T-0870 is a fixed-price federal procurement issued by the DLA Weapons Support Land Supply Chain for the acquisition of 69,000 O-rings, identified by NSN 5331-01-484-8566. The contract requires delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a delivery period of 82 days after order and a required delivery date of February 6, 2027. The items must be free of asbestos and must maintain at least 85 percent of their 180-month non-extendable shelf-life upon receipt. Technical compliance is governed by the DLA Master List of Technical and Quality Requirements, with specific packaging mandates under MIL-STD-2073-1E and marking requirements per MIL-STD-129. Due to potential deterioration from ultraviolet rays, items must be sealed in medium-duty, waterproof, greaseproof, opaque bags according to MIL-DTL-117. The contract incorporates various FAR and DFARS clauses, including strict guidelines on safeguarding covered defense information, cybersecurity reporting, and the Buy American Act. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

MIL-SPEC Packaging and Shipping ServicesThis subcontract for MIL-SPEC Packaging and Shipping Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves the specialized packaging and marking of one Bearing Unit Housing in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards. To ensure compliance with safety and logistics regulations, the provider must adhere to RP001 palletization requirements and guarantee that no mercury is used in the preservation process per IP056. The contractor is responsible for coordinating the final delivery of the processed component to DLA Distribution DDSP New Cumberland. This requirement falls under NAICS code 488510 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

Freight Transportation Arrangement

POSTED

DEADLINE

Third-Party Quality Assurance and Sampling InspectionThis subcontract for Third-Party Quality Assurance and Sampling Inspection supports the Department of Defense through the DLA Weapons Support ASC Commodities Division. The selected provider will perform independent quality verification for prime contractors, executing sampling for critical, major, and minor attributes using Zero Based Sampling Plans in accordance with MIL-STD-1916 or ASQ H1331. Compliance with MIL-STD-105/ASQ Z1.4 is required, and all measurements must be conducted using calibrated M&TE per RT001. The contractor is responsible for delivering detailed inspection reports and certifications of conformance. Due to the nature of the technical data involved, JCP certification is a mandatory requirement for access. This opportunity falls under NAICS code 541380, with a response deadline set for October 16, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Precision Machining and Fabrication of Bearing Unit HousingThis subcontract involves the precision machining and fabrication of one Bearing Unit Housing, part number 566-7067170-A2, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The work must be executed in strict accordance with Basic Drawing NR 53711 7067170 Rev A and Reference QAP 1387170 Rev B. Key technical requirements include physical identification per RQ017 and guaranteed mercury-free production as mandated by NAVSEA 5300-003D. To be eligible for this project, the provider must maintain JCP certification for the handling of ITAR data and ensure full compliance with DFARS 252.204-7012. The contract falls under NAICS code 332710 and requires the delivery of one completed housing unit.

POSTED

DEADLINE

Supplier of Flap Position Indicators (NSN 6685-00-887-6814)This subcontract involves the procurement or manufacture of five new and unused Flap Position Indicators, specifically AMETEK Part Number SR-4J, for prime contractors delivering to the DLA Weapons Support ASC Commodities Division. The selected supplier must ensure all items are packaged, marked, and palletized in strict accordance with MIL-STD-129, MIL-STD-2073-1E, and RP001 standards. Final delivery of the packaged indicators is required at DLA Distribution DDSP New Cumberland. Quality assurance is a critical component of the agreement, requiring adherence to DLA RA001 requirements and sampling plans defined by MIL-STD-1916 or ASQ H1331. The opportunity falls under NAICS code 423840 and was posted by the Department of Defense. Interested parties must have submitted their responses by the deadline of October 19, 2026.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on projects for the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The scope of work involves providing specialized military-grade packaging, preservation, and marking for bearings to ensure they meet strict DLA acceptance criteria. Technical execution must adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, incorporating specific requirements for cleaning, drying, and cushioning. The service provider is required to utilize industrial marking equipment and MIL-SPEC preservation materials to complete the deliverables. This opportunity falls under NAICS code 488510 and was posted on October 11, 2026, with a response deadline of October 16, 2026.

Freight Transportation Arrangement

POSTED

DEADLINE

Annular Ball Bearing Supplier (NSN 3110-01-149-5939)This subcontract involves the manufacture and supply of 14 precision annular ball bearings, identified by NSN 3110-01-149-5939, for prime contractors supporting DLA Weapons Support ASC projects. The bearings must be produced in strict accordance with U.S. Army Tank Automotive Command Drawing 12292906 and all associated Technical Data Packages. Delivery is required FOB Origin. Due to the technical nature of the components, the supplier must possess specialized precision machining and grinding equipment. Furthermore, the contractor is required to maintain strict regulatory and security certifications, including ITAR/EAR compliance, JCP certification, and CMMC Level 2 certification.

Ball and Roller Bearing Manufacturing

POSTED

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract for Military-Grade Packaging and Marking Services supports the Department of Defense through the DLA Weapons Support ASC Commodities Division. The scope of work involves providing specialized packaging, marking, and palletization for prime contractors, specifically requiring the delivery of three packaged and marked sleeve bushings to DLA Distribution DDSP New Cumberland. All services must adhere to strict military specifications, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 standards for palletization. The contractor is required to utilize military-specification materials and equipment to ensure all shipments meet the necessary defense standards.

Motor Vehicle Towing

POSTED

DEADLINE

Precision Machining and Supply of Sleeve BushingsThis subcontract involves the precision machining and supply of three high-precision sleeve bushings for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating the bushings to Part Number 6071-A103-560, ensuring they meet critical application tolerances through the use of CNC lathes and grinders. Quality assurance is a primary requirement, with sampling performed according to MIL-STD-1916 or ASQ H1331 standards. Final acceptance is contingent upon a zero-non-conformance policy, meaning all delivered components must be flawless and fully inspected to meet the strict specifications of the Department of Defense.

POSTED

DEADLINE

BEARING, BALL, ANNULAR

Solicitation # SPE4A6-27-Q-0082

Solicitation SPE4A6-27-Q-0082 is a firm fixed price request from the DLA Weapons Support ASC Commodities Division for 14 annular ball bearings, identified by NSN 3110-01-149-5939. The requirement specifies delivery within 30 days after receipt of order with FOB Origin terms. Technical compliance is mandated per U.S. Army Tank Automotive Command Drawing 12292906 and associated Technical Data Packages. The contract is not a small business set-aside and requires a contractor declaration regarding the domestic or foreign nature of the materials offered. The procurement includes stringent quality and security requirements, including inspection and acceptance at origin and adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the awardee must comply with CMMC Level 2 certification and DFARS safeguarding requirements for covered defense information. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

Ball and Roller Bearing Manufacturing

POSTED

DEADLINE

BUSHING, SLEEVE

Solicitation # SPE4A6-27-Q-0081

Solicitation SPE4A6-27-Q-0081 is a Firm Fixed Price request issued by the DLA Weapons Support ASC Commodities Division for the procurement of three sleeve bushings, part number 6071-A103-560 (NSN 3120-01-523-5039). The items are designated as critical application items and must be delivered within 93 days after order to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the point of origin. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Quality assurance requires sampling in accordance with MIL-STD-1916 or ASQ H1331, with a zero-non-conformance requirement for acceptance. Contractors must utilize the Wide Area WorkFlow system for invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information and prohibitions on contracting with entities linked to Chinese military lobbyists.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

INDICATOR, FLAP POSITIO

Solicitation # SPE4A6-27-Q-0085

Solicitation SPE4A6-27-Q-0085 is a request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of five Flap Position Indicators, NSN 6685-00-887-6814, part number SR-4J from AMETEK, Inc. This is a firm fixed price requirement for critical application items that must be new and unused. Delivery is required within 79 days after order, with shipping and acceptance points set at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-129 for marking, MIL-STD-2073-1E for packaging, and RP001 for palletization. Quality assurance will be conducted using zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Award will be based on best value, evaluating a trade-off between price, quoted delivery, and past performance, with a heavy emphasis on Supplier Performance Risk System assessments. Administrative requirements include electronic invoicing via Wide Area Workflow and compliance with various FAR and DFARS clauses regarding business ethics, cybersecurity, and the prohibition of hazardous materials.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

HOUSING, BEARING UNIT

Solicitation # SPE4A6-27-Q-0084

Solicitation SPE4A6-27-Q-0084 is a firm-fixed-price request for quotation issued by the DLA Weapons Support ASC Commodities Division for the procurement of one bearing unit housing, NSN 3130-01-497-7438. The required delivery date is 124 days after award, with the item to be shipped to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the point of origin. Quotations are due by October 16, 2026, and must be submitted to the issuing office in Richmond, Virginia. The contract mandates strict adherence to DLA technical and quality requirements, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, while explicitly prohibiting the use of mercury or mercury compounds in preservation and packing. Due to the nature of the technical data, the item is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and specific DLA training. Additionally, the contractor must comply with DFARS 252.204-7012 for safeguarding covered defense information and may be required to hold CMMC Level 2 certification. Payment will be processed electronically via the Wide Area Workflow system.

Ball and Roller Bearing Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS