Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aerospace-Grade Surface Finishing and Coating

Active

Federal

Response Deadline10/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity is for the provision of aerospace-grade surface finishing and coating services to support the DLA Weapons Support Fluid Handling Division. The selected contractor will perform specialized plating and surface treatments on metal tube assemblies in strict accordance with Reference Drawing NR 81755 and associated TDP specifications. All delivered components must be accompanied by a certification of conformance for the applied finishes. The project is designated as a total small business set-aside under NAICS code 332813, with performance taking place in New Cumberland. To be eligible, contractors must maintain ISO 9001 or AS9100 certification and ensure full compliance with ITAR and EAR regulations. Responses to this solicitation are due by October 19, 2026.

General Info

Aerospace surface finishing for DLA metal tubes; small business set-aside; due October 19, 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE7M4-27-T-0510.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TUBE ASSEMBLY, METAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 8

subcontract

Response DeadlineOct 19

Submission deadline

Response Deadline

10/19/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized plating and surface treatment for prime contractors on DLA Weapons Support Fluid Handling Division projects. Applies coatings to metal tube assemblies per Reference Drawing NR 81755 and associated TDP specifications. Provides certification of conformance for all applied finishes. Requires ISO 9001 or AS9100 certification and ITAR/EAR compliance. Delivers surface-treated components.

Similar Contracts

Same NAICS industry code

Hot-Dip Galvanizing and Metal CoatingThis subcontract involves providing hot-dip galvanizing and industrial coating services for prime contractors working on City of Greensboro infrastructure projects. The scope of work focuses on preventing corrosion on catch basin tops through professional surface preparation via sandblasting and the application of zinc coatings. All work must be executed in strict accordance with ASTM A123 or other City of Greensboro Standard 412 requirements to ensure the delivery of high-quality finished metal components. The opportunity is categorized under NAICS code 332813 and is associated with the City of Greensboro in North Carolina. Interested parties should note the tight response window, with the solicitation posted on October 12, 2026, and a response deadline of October 14, 2026.

City of Greensboro

POSTED

about 20 hours ago

DEADLINE

Manganese Phosphate Coating ServicesThis subcontract for Manganese Phosphate Coating Services involves performing specialized chemical coatings on fabricated gun parts for prime contractors supporting DLA Weapons Support. The selected provider must apply manganese phosphate coatings according to specific drawing specifications to ensure metal components meet all required corrosion and wear standards. Performance of this work requires the use of industrial phosphate plating tanks and is subject to inspection by the DCMA QAR. Eligible contractors must be ITAR registered and receive formal approval from the Contracting Officer. The work is associated with NAICS code 332813 and will be performed in Tracy, California. Interested parties must respond by October 22, 2026, to provide these essential services for the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Aerospace Industrial Painting and FinishingThis subcontract for Aerospace Industrial Painting and Finishing involves providing professional painting services for aircraft towbars supporting prime contractors on DLA Troop Support projects. The scope of work requires the surface preparation and application of FED-STD-595 White aerospace paint using industrial spray booths, with a final delivery of six white-painted towbars. All work must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards to ensure proper coating thickness, adhesion, marking, and packaging. Managed by the Department of Defense under Construction and Equipment MRO SVC I, this opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813. The solicitation was posted on October 9, 2026, with a response deadline of October 16, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing involves providing specialized surface treatments and anti-corrosion coatings for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work focuses on applying aerospace-grade plating and chemical treatments to torque tube components in strict accordance with Boeing technical specifications. To ensure the complete absence of corrosion and maintain high quality standards, the contractor must utilize industrial plating baths and surface roughness testers. The final deliverable consists of finished, coated components that are ready for final assembly. This opportunity is categorized under NAICS code 332813 and was posted on October 9, 2026, with a response deadline of October 16, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Aerospace Component Finishing and PlatingThis subcontract, titled Aerospace Component Finishing and Plating, is issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division. The project requires the application of aerospace-approved surface treatments and plating, specifically anodizing or passivating, for machined shafts according to P/N 257733 specifications. The selected contractor is responsible for delivering finished coated shaft components and must perform rigorous quality control, including surface roughness testing and coating thickness verification. A critical requirement for this contract is that the provider must hold NADCAP accreditation for special processes. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813. Interested parties must submit their responses by October 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Precision Surface Coating and PlatingThis subcontract for Precision Surface Coating and Plating supports the Department of Defense through the DLA Weapons Support Fluid Handling Division. The selected provider will apply specialized surface coatings and plating for prime contractors, ensuring all components meet a 16 RMS surface finish and adhere to strict corrosion and wear specifications. To maintain environmental standards, all plating processes must be performed without the use of Class I Ozone Depleting Chemicals. Eligible contractors must hold US/Canada Joint Certification Program certification and maintain full compliance with ITAR and EAR regulations. This opportunity falls under NAICS code 332813, with a response deadline set for October 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Heat Treating and Surface Hardness ServicesThis subcontract for Heat Treating and Surface Hardness Services supports prime contractors on projects for the Department of Defense DLA Weapons Support Fluid Handling Division. The scope of work involves providing specialized thermal processing for metal components, specifically focusing on heat treating, stress relieving, and shot peening, as well as performing Rockwell surface hardness testing. All delivered components must be accompanied by the appropriate process certifications to ensure quality and compliance. To be eligible for this contract, providers must maintain US/Canada Joint Certification Program certification and strictly adhere to ITAR and EAR compliance regulations. The opportunity is categorized under NAICS code 332813, with a response deadline set for October 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Aerospace Plating and Coating ServicesThe Aerospace Plating and Coating Services subcontract involves providing specialized surface treatments for machine bolts on DLA Aviation Supply Chain projects. The scope of work requires the application of ASTM B633 Type II FE/ZN 5 zinc plating and SAE AMS-QQ-P-416 chemical conversion coatings, with a focus on verifying coating thickness and adherence to strict aviation standards using industrial plating tanks. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332813. Due to the nature of the Department of Defense project, the contractor must maintain CMMC Level 2 certification and ensure full ITAR and EAR compliance. All delivered components must meet the specified ASTM and SAE standards.

AVIATION SUPPLY CHAIN

POSTED

DEADLINE

CLEANING SOLVENT, GE

Solicitation # SPE8E5-26-T-4488

Solicitation SPE8E5-26-T-4488 is a fixed-price request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of 25 boxes of Cleaning Solvent, GE, identified by NSN 7930-01-367-0995. This acquisition is an Foreign Military Sales requirement for the Hellenic Air Force in Greece, with an original required delivery date of July 10, 2025. The product must adhere to technical standard SAE AMS3167 Revision B and is classified as a Type I Code H item with a non-extendable shelf life of 12 months. Delivery is specified as FOB Origin, with both inspection and acceptance occurring at the point of origin. The contract mandates strict compliance with hazardous material regulations, requiring labeling in accordance with the Hazard Communication Standard and shipping per IP025. Packaging must follow MIL-STD-2073-1E and MIL-STD-129, with palletization meeting DLA requirement RP001. Offerors must comply with the Buy American Act and Berry Amendment, disclosing any non-domestic materials used. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment requests. The solicitation is categorized under NAICS 332813 and incorporates various FAR and DFARS clauses regarding cybersecurity, sustainable products, and the prohibition of hexavalent chromium.

Defense Logistics Agency

POSTED

DEADLINE

Aerospace Valve Plating and Hardness TreatmentThis subcontract for Aerospace Valve Plating and Hardness Treatment supports prime contractors on DLA Aviation projects under the Department of Defense. The scope of work involves providing specialized plating and hardness treatments for regulating valve components, specifically applying coatings according to drawing 19-40763. The selected provider must perform hardness testing and non-destructive testing of treated surfaces using industrial plating baths and NDT equipment. To ensure quality and compliance, the contractor is required to hold ISO 9001 certification, and Nadcap certification may also be necessary. The final deliverables consist of plated and hardness-treated valve components. This opportunity was posted on October 9, 2026, with a response deadline of October 20, 2026, falling under NAICS code 332813.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Aerospace Surface Treatment and CoatingThis subcontract opportunity with the Department of Defense for DLA Aviation at Oklahoma City involves providing specialized surface treatments, coatings, or plating for Cold Section Module components. The selected contractor will be responsible for applying aerospace-grade finishes to part number 4089012-800 in accordance with the provided technical data package, utilizing industrial coating lines, plating baths, or thermal spray equipment to deliver components ready for final assembly. To be eligible for this project, contractors must hold AS 9100 and NADCAP certifications. The solicitation was posted on October 9, 2026, with a response deadline of November 12, 2026. The work falls under NAICS code 332813, focusing on high-standard aerospace surface processing for prime contractors.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

in about 1 month

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing supports DLA Aviation accessory gearbox projects through the Department of Defense. The scope of work involves performing specialized surface treatments and coatings for prime contractors, specifically focusing on chemical cleaning, anodizing, and the application of aerospace-approved coatings to AMS 4215 aluminum surfaces. These processes are executed using dedicated anodizing tanks and curing ovens to deliver finished gearbox components. To qualify for this engagement, providers must maintain rigorous industry certifications, including AS 9100, ISO 9001:2000, and NADCAP. The opportunity was posted on October 9, 2026, with a response deadline of November 12, 2026. The project falls under NAICS code 332813 and is managed by the DLA Aviation office in Oklahoma City.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

Supplier of Air Breathing Hoses (NSN 4720-01-688-4449)This subcontract involves the manufacture or procurement of 13 specialized air breathing hoses, identified by NSN 4720-01-688-4449, for the DLA Weapons Support Fluid Handling Division. The hoses must feature a 120-month shelf life and adhere to strict packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129. Delivery is required FOB Origin to the DLA Distribution DDSP in New Cumberland, Pennsylvania. To be eligible, the supplier must maintain CMMC Level 2 certification and ensure full compliance with ITAR, EAR, and DFARS 252.204-7012 regulations. The project falls under NAICS code 326220, with a response deadline set for October 19, 2026.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

Aerospace Grade Raw Material SupplyThis subcontract, issued by the Department of Defense for the DLA Weapons Support Fluid Handling Division, involves the supply of certified aerospace-grade raw metal stock or forged blanks. The scope of work requires the delivery of certified raw materials for 10 shaft units, with a strict emphasis on supply chain traceability. To meet these standards, the provider must furnish Material Test Reports and Certificates of Conformance in accordance with C03 requirements and ensure full compliance with DFARS Specialty Metals clauses. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 331210. Interested parties must have submitted their responses by the deadline of October 16, 2026. This procurement ensures that prime contractors receive high-specification materials that meet rigorous aerospace and defense industry certifications.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

DEADLINE

Precision Manufacturing of Shaft SubassemblyThis subcontract, issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division, involves the precision machining and assembly of 10 shaft subassemblies for Eaton Aerospace part number 257733. The scope of work requires the use of CNC turning, milling, and grinding on aerospace-grade alloys to meet strict OEM specifications, with quality validation performed via CMM. The opportunity is designated as a total small business set-aside under NAICS code 336413. To be eligible, contractors must comply with the DLA Master List of Technical and Quality Requirements and complete a CMMC Level 2 self-assessment. The response deadline for this requirement is October 16, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

NDT Inspection and Material CertificationThis subcontract for the DLA Weapons Support Fluid Handling Division involves providing non-destructive testing and material validation services for prime contractors. The scope of work includes performing magnetic particle, liquid penetrant, radiographic, and pressure leakage testing to ensure material integrity. The selected provider is responsible for delivering detailed inspection reports and material certifications. To qualify, contractors must maintain US/Canada Joint Certification Program certification and ensure full compliance with ITAR and EAR regulations. Technical requirements specify the use of Level II or III NDT technicians. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense.

Testing Laboratories and Services

POSTED

DEADLINE

Precision Metal Tube Assembly FabricationThis subcontract involves the fabrication of seven high-precision metal tube assemblies for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The project requires extreme technical precision, with machining and forming specifications demanding tolerances of .001 inch or less and surface finishes of 16 RMS or less. To be eligible, contractors must maintain rigorous industry certifications and security clearances, including SAE AS9100, US/Canada Joint Certification Program certification, and CMMC Level 2. Additionally, the provider must hold ITAR/EAR authorization to handle the sensitive nature of these defense components.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

HOSE, AIR BREATHING

Solicitation # SPE7M4-27-T-0591

Solicitation SPE7M4-27-T-0591 is a fixed-price contract issued by the DLA Weapons Support Fluid Handling Division for the procurement of 13 air breathing hoses, identified by NSN 4720-01-688-4449. The required delivery date is January 22, 2026, with shipment to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Quotations are due by October 19, 2026. Invoicing and payment must be processed electronically through the Wide Area Workflow system. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, as well as specific packaging and marking standards including MIL-STD-2073-1E and MIL-STD-129. Notably, the items have a non-extendable shelf life of 120 months. Compliance requirements include CMMC Level 2 certification, safeguarding of covered defense information per DFARS 252.204-7012, and strict export controls under ITAR and EAR. Additionally, offerors must comply with the Buy American Act and the Berry Amendment, providing full disclosure if non-domestic materials are utilized.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

TUBE ASSEMBLY, METAL

Solicitation # SPE7M4-27-Q-0039

Solicitation SPE7M4-27-Q-0039 is a fixed-price request for quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of seven metal tube assemblies, identified by NSN 4710-00-797-0040. These items are designated as Critical Safety Items, requiring 100 percent inspection of heat treating, stress relieving, and surface hardness. The required delivery timeline is 300 days after the date of order, with a material need ship date of October 31, 2027. Inspection and acceptance will occur at the origin, and the contract is issued under the First Destination Transportation program for delivery to the DLA Distribution New Cumberland facility in Pennsylvania. The procurement is subject to strict technical and quality requirements, including adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and specific DLA authorizations. Award will be based on the best value to the Government, evaluating past performance, offered delivery, and price. Contractors must utilize the Wide Area WorkFlow system for electronic invoicing and comply with various FAR and DFARS clauses, including those regarding the Buy American program and safeguarding covered defense information.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M4-27-Q-0040

Solicitation SPE7M4-27-Q-0040 is a fixed-price request for quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of 10 units of Shaft, Subassy (NSN 1420-00-961-5009), corresponding to Eaton Aerospace LLC part number 257733. This procurement is designated as a total small business set-aside under NAICS code 336413. The required delivery date is 300 days after order award, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot Hill at Hill AFB, Utah. The contractor must adhere to strict technical and quality standards, including packaging per ASTM D3951 and palletization according to RP001, with all DLA Master List requirements taking precedence. Marking and labeling must comply with MIL-STD-129. Key compliance mandates include a CMMC Level 2 Self-Assessment, safeguarding of covered defense information, and adherence to various DFARS and FAR clauses regarding cybersecurity, foreign entity restrictions, and small business subcontracting. Invoicing and receiving reports are to be processed electronically via the Wide Area Workflow system. Award will be based on the best value to the government, evaluating price, offered delivery, and past performance.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Military-Standard Packaging and Delivery ServicesThis subcontract for Military-Standard Packaging and Delivery Services supports the Department of Defense through the DLA Weapons Support Fluid Handling Division. The selected provider will perform specialized military packaging, marking, and shipping for prime contractors, ensuring all components adhere to MIL-STD-2073-1E and MIL-STD-129 standards. The scope of work includes the use of MIL-SPEC preservation and cushioning materials, as well as the application of hazardous materials labeling in compliance with 29 CFR 1910.1200. The contract is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 493110. All completed and packaged shipments are to be delivered to Tracy, California. The solicitation was posted on October 8, 2026, with a response deadline of October 19, 2026.

General Warehousing and Storage

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS