Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aerospace Hose Clamp Manufacturer (NSN 4730-00-278-0417)

Open

Federal

Response Deadline11/19/2026, 11:00:00 AM CST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and delivery of 2,020 aircraft-grade band and screw type hose clamps for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The hardware must be produced in strict accordance with National Aerospace Standard (NAS), TDP Rev A Gen 1, and NAS1924/NAS1925 standards. All components require precision machining to meet specific TDP tolerances and must be entirely free from mercury and ozone-depleting chemicals. The project is categorized under NAICS code 332722 and requires full compliance with the Buy American Act. Performance for this contract is centered at Tinker AFB. Interested parties should note the response deadline of November 19, 2026, to provide the required aerospace hardware under the specified technical guidelines.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-27-T-2986.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CLAMP, HOSE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 8

subcontract

Response DeadlineNov 19

Submission deadline

Response Deadline

11/19/2026, 11:00:00 AM CSTin 11 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies 2,020 band and screw type hose clamps for prime contractors on DLA Weapons Support Fluid Handling Division projects. Manufactures clamps per National Aerospace Standard (NAS), TDP Rev A Gen 1, and NAS1924/NAS1925 standards. Hardware must be free from mercury and ozone-depleting chemicals. Requires precision machining to meet TDP tolerances and Buy American Act compliance. Delivers 2,020 aircraft-grade hose clamps.

Similar Contracts

Same NAICS industry code

Plain Hexagon Nut ManufacturerThis subcontract requires the manufacture and delivery of 465 plain hexagon nuts for prime contractors supporting the DLA Weapons Support ASC Commodities Division. All units must be produced according to NSN 5310-01-593-9654 specifications and the DLA Master List of Technical and Quality Requirements. The contract strictly prohibits the use of additive manufacturing and mandates that materials be free of hexavalent chromium. To ensure quality control, the manufacturer must utilize inspection systems certified under ISO 9001 or SAE AS9003. The completed order of 465 nuts is to be delivered FOB Origin to the DDSP New Cumberland Facility in Pennsylvania. This opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Self-Locking Plate Nut SupplyThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the supply of 267 self-locking plate nuts identified by NSN 5310004550395. The contractor is responsible for manufacturing or sourcing these components while adhering to strict quality control sampling standards per MIL-STD-1916 or ASQ H1331. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332722. The agreement mandates full compliance with MIL-STD-2073-1E, RP001, and MIL-STD-129 for all packaging and marking requirements. Additionally, the provider must ensure that all hazard warning labels meet 29 CFR 1910.1200 standards and provide Material Safety Data Sheets where applicable. This opportunity is designated as a Total Small Business Set-Aside.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Supply of Critical Application Flat WashersThis subcontract, issued by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament, requires the procurement of 59 specialized flat washers. The items must meet specific BAE Systems Land and Armaments L.P. and NSN specifications, with strict adherence to the DLA Master List technical requirements. All deliverables are classified as Critical Application Items and must comply with the Buy American Act, as well as MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332722, with performance taking place in New Cumberland. Interested parties must submit their responses by November 19, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 1 hour ago

DEADLINE

Shear Bolt SupplyThis subcontract involves the supply of 17 specialized shear bolts for prime contractors under the Defense Logistics Agency Weapons Support ASC Commodities Division. The provider is responsible for manufacturing or sourcing these components in strict accordance with DLA technical data and the Master List of Technical and Quality Requirements, with a specific prohibition against unauthorized additive manufacturing. The contract mandates full compliance with the Buy American Act and NIST SP 800-171 security standards. Additionally, the provider must ensure supply chain traceability per DLAD #C03 and adhere to MIL-STD-129 and MIL-STD-2073-1E packaging specifications. Performance for this requirement is centered in Tracy, California.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Manufacturing of Self-Locking Hexagon NutsThis subcontract involves the manufacture of 921 zinc-coated steel self-locking hexagon nuts for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The production must strictly adhere to Basic Drawing NR 10001 2533408 Revision B and TDP Rev A Gen 1, utilizing precision machining equipment and maintaining compliance with QAP 13873. Quality assurance is a critical component of the agreement, requiring sampling and inspection conducted according to MIL-STD-1916 or ASQ H1331. All delivered units of NSN 5310-00-020-0359 must be accompanied by a Certificate of Quality Compliance. The work is to be performed in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Supply of Self-Locking Plate Nuts (NSN 5310016696897)This subcontract involves the manufacture or procurement of 853 self-locking plate nuts, part number BACN10KE3B2CD, to support prime contractors delivering DLA supply contracts for The Boeing Company. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, with performance taking place at Tinker AFB. All components must adhere to FAA airworthiness standards and require FAA Airworthiness Approval. Quality assurance must be conducted using zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331, and the provider must ensure full supply chain traceability per RQ018. Final delivery must include the required units along with Certificates of Airworthiness and Conformance.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 1 hour ago

DEADLINE

Socket Head Cap Screw ManufacturerThis subcontract involves the manufacture of 439 specialized socket head cap screws, part number AES14U164500BB3AB7, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The screws must be produced to specifications of 0.164-32 UNC-3A and 0.500 inches in length. Production must be carried out using precision machining, as additive manufacturing is strictly prohibited. The manufacturer must ensure strict adherence to ASME B18.24-2015 and ASME B18.3-2003 standards, with marking requirements following MIL-STD-130N. Quality assurance requires zero-based sampling per MIL-STD-1916. Final delivery consists of the 439 finished screws accompanied by a Certificate of Conformance. The place of performance is located in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Hexagon Head Cap Screw Supplier

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Supplier of Plain Blind Rivet Nuts (NSN 5310-01-503-3521)This subcontract involves the supply of 364 Plain Blind Rivet Nuts meeting NSN 5310-01-503-3521 specifications for the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing the hardware, ensuring bare item marking follows MIL-STD-130N and packaging adheres to ASTM D3951 and RP001 standards. Quality assurance is critical, requiring zero-non-conformance verified through MIL-STD-1916 or ASQ H1331 inspections. The agreement mandates strict compliance with DFARS 252.225-7001 and DFARS 252.204-7012 regulations. Delivery of the units is set as FOB Origin to DLA Distribution, with performance based in New Cumberland. The contract falls under NAICS code 332722 and was posted by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Supply of Plain Round Nuts (NSN 5310010295797)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Precision Flat Washer FabricationThis subcontract involves the precision fabrication of 82 flat washers, identified by NSN 5310-01-049-9174, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. All parts must be manufactured according to drawing 19200 10554820 and adhere to ASME Y14.5M-1994 standards. The project mandates a zero-nonconformance acceptance rate in accordance with MIL-STD-105/ASQ Z1.4, and the use of additive manufacturing is strictly prohibited. The selected provider must hold an ISO 9001:2015 certification to ensure quality management standards are met. Performance will take place in Anniston, Alabama, with the final deliverable consisting of 82 finished and inspected flat washers. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Manufacture of Tapping, Thread-Cutting Screws (NSN 5305-00-052-6919)This subcontract involves the manufacture of 20 tapping, thread-cutting steel screws for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The components must be fabricated according to NASM24629 Revision 3 and Part Number MS24629-52, with a strict prohibition on the use of additive manufacturing. Performance will take place at Hill AFB. The contractor is required to maintain SAE AS9003 or ISO 9001 quality systems and ensure compliance with MIL-STD-1916 or ASQ H1331 sampling standards. Final deliverables must be packaged in accordance with MIL-STD-2073-1E and MIL-STD-129. The response deadline for this requirement is November 16, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

Supply of Packing Assembly (NSN 5330-01-397-7530)This subcontract involves the supply of 667 Packing Assemblies (NSN 5330-01-397-7530) for the DLA Weapons Support Fluid Handling Division. The selected provider must source authentic parts from approved manufacturers, specifically Marvin Engineering, Saint-Gobain, or Trelleborg, while maintaining full traceability. All deliveries to DLA Distribution must adhere to MIL-STD-129 and MIL-STD-2073-1E marking standards. The opportunity is a total small business set-aside under NAICS code 423840, with performance taking place at Robins Air Force Base. To be eligible, contractors must hold JCP certification and meet CMMC Level 2 requirements. Responses are due by November 19, 2026.

Industrial Supplies Merchant Wholesalers

POSTED

about 1 hour ago

DEADLINE

Manufacturing of Packing Assembly (NSN 5330-01-397-7530)This subcontract, issued by the Department of Defense for the DLA Weapons Support Fluid Handling Division, requires the manufacture and delivery of 667 warranted packing assemblies under NSN 5330-01-397-7530. Production must strictly adhere to source-controlled drawing NR 98752 9436127, Rev B, and includes a mandatory First Article Test. Finished items must be packaged in MIL-DTL-117 Type II Class C Style 1 bags, with performance taking place at Robins Air Force Base. The opportunity is a total small business set-aside under NAICS code 339991. To be eligible, contractors must maintain approved source status, hold JCP certification for ITAR and EAR data, and meet CMMC Level 2 cybersecurity requirements. The response deadline for this solicitation is November 19, 2026.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

Supply of Nonmetallic Hose Assemblies (NSN 4720200082546)This subcontract involves the supply of two nonmetallic hose assemblies, identified by NSN 4720200082546 and Part Number E2D-PA1RV, for prime contractors under the DLA Weapons Support Fluid Handling Division of the Department of Defense. The selected provider is responsible for manufacturing or sourcing the assemblies and ensuring all items are packaged according to RP001 DLA Packaging Requirements and marked in compliance with MIL-STD-129. Performance for this contract will take place in Norfolk, Virginia. To be eligible, the contractor must maintain active registrations in both SAM and WAWF. The solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026, falling under NAICS code 339999.

All Other Miscellaneous Manufacturing

POSTED

about 1 hour ago

DEADLINE

First Article Test (FAT) Execution

Testing Laboratories and Services

POSTED

about 1 hour ago

DEADLINE

Supply of Fluid Passage Bolts (NSN 4730-00-435-9381)

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 1 hour ago

DEADLINE

Hydraulic Hose Protective Sleeve SupplierThis subcontract, managed by the DLA Weapons Support Fluid Handling Division of the Department of Defense, requires the supply of 12 protective sleeves for hydraulic hoses. The supplier is responsible for manufacturing or sourcing components that strictly adhere to NSN 4720-99-349-5721 and part numbers G406/4940 and G406/4940/3. Critical compliance requirements include adherence to Class I ozone depleting chemical restrictions and MIL-STD-129 standards for shipment and storage marking. The place of performance for this contract is located in Texarkana, Texas, under NAICS code 333998.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 1 hour ago

DEADLINE

Supply of Hydraulic Link and PinThis subcontract involves the supply of 35 hydraulic link and pin units for prime contractors supporting the Defense Logistics Agency Weapons Support Fluid Handling Division. The provider is responsible for manufacturing or sourcing components that strictly adhere to the technical specifications for NSN 1650004560436, ensuring full compliance with the DLA Master Solicitation and all associated technical and quality requirements. Performance for this contract takes place at Hill AFB. The logistics process requires items to be packaged specifically for Government-Arranged Transportation under the First Destination Transportation program. The opportunity is categorized under NAICS code 332710 and is managed by the Department of Defense.

POSTED

about 1 hour ago

DEADLINE

Metallic Hose Assembly ManufacturingThis subcontract with the DLA Weapons Support Fluid Handling Division involves the manufacture and delivery of 94 metallic hose assemblies, specifically NSN 4720015254530. The production must strictly adhere to Army Drawings and include the application of high-temperature and Chemical Agent Resistant Coatings as specified by DCSC Drawing 16236 CS-2300-0001. Quality assurance is a critical component of the agreement, requiring sampling and inspection conducted per MIL-STD-1916 or ASQ H1331, while maintaining compliance with RQ001 Higher Level Contract Quality Requirements. The work is to be performed in New Cumberland, Pennsylvania, under NAICS code 332994.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 1 hour ago

DEADLINE

Nonmetallic Hose Assembly Manufacturing/SupplyThis subcontract involves the manufacture and supply of 37 nonmetallic hose assemblies, identified by NSN 4720-00-618-0655, for the DLA Weapons Support Fluid Handling Division. The contractor is responsible for producing these critical application items in strict accordance with MIL-DTL-8790F(3) Revision F. Key requirements include the precise marking of manufacture, cure, assembly, and expiration dates to manage a non-extendable shelf life of 120 months for Type I, Code W materials. The project falls under NAICS code 339910 and is designated for performance at Robins Air Force Base. The procurement process is managed by the Department of Defense, with a response deadline set for November 19, 2026. The selected provider will act as a supplier to prime contractors tasked with fulfilling these DLA supply requirements.

Jewelry and Silverware Manufacturing

POSTED

about 1 hour ago

DEADLINE

Nonmetallic Hose Assembly SupplierThis subcontract involves the supply of 59 nonmetallic hose assemblies, specifically NSN 4720016783226, for prime contractors working under the Defense Logistics Agency Weapons Support Fluid Handling Division. The supplier is responsible for manufacturing or sourcing the assemblies to meet the technical and quality standards defined in RA001, while ensuring packaging complies with RP001 and government identification removal follows RQ011. The project falls under NAICS code 332999 and is managed by the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. The solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

Supply of Non-Metallic Hose and Hardware ComponentsThis subcontract involves the supply of raw non-metallic hose tubing and hardware fittings to prime contractors supporting the DLA Weapons Support Fluid Handling Division. The contractor is responsible for providing materials that strictly adhere to Drawing 19207 12581396 specifications and must ensure all components are mercury-free in accordance with NAVSEA 5100-003D. Required deliverables include raw hose lengths, hardware components, material certifications, and mill test reports. The project falls under NAICS code 326220 and is managed by the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 19, 2026, for this procurement effort.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 1 hour ago

DEADLINE

Manufacturing of Hose Assembly, Nonme (NSN 4720-01-662-1543)This subcontract involves the manufacturing of 50 nonme hose assemblies for the DLA Weapons Support Fluid Handling Division under NSN 4720-01-662-1543. Production must strictly adhere to Basic Drawing NR 19207 12581396 and TDP Rev B Gen 3, with a specific prohibition on additive manufacturing unless prior authorization is granted. All finished products must be packaged according to MIL-STD-2073-1E and marked in compliance with MIL-STD-129. The contractor is required to maintain JCP certification and meet rigorous cybersecurity standards, including CMMC Level 2 and NIST SP 800-171 compliance. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 19, 2026, to fulfill the requirements of this Department of Defense project.

Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 1 hour ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Manufacturer of Self-Locking Plate Nuts (NSN 5310-01-122-4730)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Manufacturing of Self-Locking Plate Nuts (NSN 5310-01-349-0830)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Manufacture of Self-Locking Plate Nuts (NASM21073)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Hexagon Head Cap Screw Supply (NSN 5305015292294)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Supply of Machine Bolts (NSN 5306005826697)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Manufacturer of Self-Locking Hexagon Nuts (NSN 5310-01-466-7088)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Supply of Flat Washers (NSN 5310013314400)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 1 hour ago

DEADLINE

Manufacturer of Eye Bolts (NSN 5306-01-186-7129)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Manufacture and Supply of Flat Washers (NAS620A4)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Precision Hardware Supply (Flat Washers)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Precision Manufacturing of Aerospace Pin-Rivets

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Supply of Self-Locking Castellated Hexagon Nuts

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS