Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aerospace Quality Assurance and Sampling Inspection

Open

Federal

Response Deadline11/13/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Aerospace Quality Assurance and Sampling Inspection subcontract involves providing independent inspection and sampling services for prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. Based in Jacksonville, the scope of work requires the execution of attribute single statistical acceptance sampling in accordance with QAP 1201 and the verification of attributes against MIL-STD-1916 or ASQ H1331. The selected provider must possess specialized expertise in MIL-STD-105/ASQ Z1.4 and utilize precision measurement tools to validate critical, major, and minor attributes. Key deliverables for this engagement include the submission of detailed inspection reports and formal sampling certifications. This opportunity falls under NAICS code 541380 and was posted with a response deadline of November 13, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

JACKSONVILLE, FL, 32212-0103, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-9915.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FAIRING, AIRCRAFT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 6

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 12:00:00 PM ESTin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs independent inspection and sampling for prime contractors on DLA Weapons Support ASC projects. Executes attribute single statistical acceptance sampling per QAP 1201 and verifies attributes against MIL-STD-1916 or ASQ H1331. Utilizes precision measurement tools to verify critical, major, and minor attributes. Requires expertise in MIL-STD-105/ASQ Z1.4. Delivers inspection reports and sampling certifications.

Similar Contracts

Same NAICS industry code

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # RFQ#9783

Management & Training Corporation (MTC) is soliciting bids under RFQ#9783 for a subcontracting opportunity to conduct a Respirable Crystalline Silica Exposure Assessment at the Edison Job Corps Center in Edison, New Jersey. The project requires a qualified industrial hygiene consultant to evaluate the Brick Trade training program, specifically focusing on 27 potentially exposed students and instructors involved in activities such as fire clay mixing and brick cutting. The scope of work includes performing site assessments, implementing a personal breathing-zone air sampling plan, and comparing results against OSHA permissible exposure limits and action levels. Deliverables consist of a written report, laboratory results, exposure calculations, and a prioritized corrective action plan for reducing exposures. This is a fee-for-service contract awarded on a best-value basis. Interested offerors must submit a lump sum bid, a completed supplier packet including Form W-9 and self-certification, proof of insurance, and three professional references by November 6, 2026. The solicitation is open to various small business set-asides, including VOSB, SDVOSB, WOSB, and HUBZone. Awardees must comply with Service Contract Labor Standards for Middlesex County, New Jersey, and adhere to strict federal guidelines regarding the protection of sensitive information and the Buy American Act. First-tier subcontractors with contracts exceeding 45,000 dollars must also provide disclosures regarding government debarment or suspension.

Edison Job Corps

POSTED

about 2 hours ago

DEADLINE

in about 1 hour

First Article Test (FAT) ServicesThis subcontract opportunity is for First Article Test (FAT) Services supporting the DLA Weapons Support Land Supply Chain. The selected provider will perform validation testing on the first production unit delivered by prime contractors to ensure full adherence to Statement of Work specifications. Key technical requirements include verifying dimensions, tension, and material integrity through the use of precision measurement tools and load or compression testing machinery, all conducted in accordance with DLA Master List quality standards. The final deliverables for this effort are a comprehensive FAT Report and a certification of compliance. The project is designated as a Total Small Business Set-Aside under NAICS code 541380 and will be performed in Greensboro, North Carolina. Interested parties must submit their responses by November 16, 2026. This procurement is managed by the Department of Defense on behalf of the DLA Weapons Support Land Supply Chain.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

Production Lot Testing (PLT) ServicesThis subcontract for Production Lot Testing services supports prime contractors on DLA Weapons Support ASC projects. The primary objective is to validate the quality conformance of critical application electrical assemblies through random sample testing, which must be coordinated with a Government Quality Assurance Representative. The final deliverables for this engagement include production lot certifications and validated test reports. Eligible providers must hold US/Canada JCP certification and maintain CMMC Level 2 compliance, along with either ISO 9001 or SAE AS9003 certification. The work is categorized under NAICS code 541380 and will be performed in New Cumberland. Interested parties should note the response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

First Article Test (FAT) and Validation ServicesThis subcontract for First Article Test and Validation Services supports prime contractors delivering to the DLA Weapons Support ASC Commodities Division. The selected provider will perform First Article Testing to validate that manufacturing processes and cable assemblies strictly adhere to government specifications and the Technical Data Package. Due to the nature of the export-controlled technical drawings involved, the contractor must maintain JCP certification to access necessary documentation. The project is categorized under NAICS code 541380 and will be performed in New Cumberland. A critical requirement of the agreement is the delivery of a completed FAT report within 15 calendar days following the contract award. Interested parties must respond by November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Thread Dimension Verification Services

DLA DIST SAN JOAQUIN

POSTED

about 2 hours ago

DEADLINE

Third-Party Quality Assurance and SamplingThis subcontract for Third-Party Quality Assurance and Sampling supports prime contractors on projects for the DLA Weapons Support ASC Commodities Division. The selected provider will perform independent inspection and sampling to verify close tolerance dimensions against NAS1580 Rev 16 standards. Technical requirements include the use of calibrated micrometers, optical comparators, or CMM equipment, with sampling and inspection conducted according to MIL-STD-1916 or ASQ H1331 to ensure zero non-conformance. The contractor is responsible for delivering detailed inspection reports and certifications of conformance. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 541380. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

First Article Testing and Validation ServicesThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires First Article Testing and Validation Services for grooved headed pins. The selected provider will validate manufacturing processes for prime contractors by verifying material properties and dimensions against Drawing NR 19200 12579607 and Drawing NR 19204 8448502. Using CMM and metrology equipment, the contractor must ensure all components meet the strict qualification standards required for Critical Application Items, ultimately delivering a validated sample part and a comprehensive First Article Test Report. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380. Interested parties must submit their responses by November 20, 2026. This procurement focuses on ensuring high-precision quality control and technical compliance for essential supply chain components delivered to the DLA.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Contractor First Article Test (CFAT) ServicesThis subcontract for Contractor First Article Test (CFAT) Services is issued by the Department of Defense under the Land Supplier Operations SMSG. The primary objective is to perform First Article Testing to validate the technical acceptability of items delivered by prime contractors under DLA supply contracts. The scope of work includes executing the Contractor First Article Test on sample units and conducting production lot testing for up to 250 units to ensure strict compliance with government specifications. The successful contractor is responsible for delivering a validated First Article Test report and final production approval. This opportunity falls under NAICS code 541380 and was posted on November 6, 2026, with a response deadline of December 7, 2026.

LAND SUPPLIER OPERATIONS SMSG

POSTED

about 2 hours ago

DEADLINE

in about 1 month

First Article and Production Lot Testing ServicesThis subcontract opportunity is for the provision of independent laboratory testing and verification services supporting prime contractors on DLA Weapons Support ASC projects. The scope of work involves conducting First Article Tests and Production Lot Tests to validate material specifications and manufacturing processes. Using metrology and material analysis tools, the contractor will ensure strict compliance with government technical data and provide certified test reports for official submission. The project is a Total Small Business Set-Aside under NAICS code 541380, managed by the Department of Defense for the DLA Weapons Support ASC Supplier Oper AE and AF Div. Performance will take place in San Diego, California. Interested parties must respond by November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

First Article Test (FAT) and Quality Validation

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

First Article Testing (FAT) Production and ValidationThis subcontract for First Article Testing Production and Validation supports the DLA Weapons Support ASC Commodities Division. The selected contractor is responsible for the first article production and quality validation of three initial units, which must be delivered to the Government First Article Test Lab at Robins AFB, GA for final inspection and approval. All deliverables, including the three units and their corresponding inspection reports, must be completed within 120 calendar days. To be eligible, contractors must maintain JCP certification and adhere to ISO 9001:2015 quality systems. The work is categorized under NAICS code 541380, with the place of performance located at Tinker AFB. Interested parties should note the response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

First Article Test (FAT) ServicesThis subcontract for First Article Test (FAT) Services supports the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div. The selected provider will perform critical testing for prime contractors to verify that the first produced unit of a project meets all DLA Master List specifications. This process involves using precision measurement and testing equipment to validate dimensions, material properties, and overall functional performance, culminating in the delivery of a validated unit and a formal FAT Report. The work is performed at Robins Air Force Base under NAICS code 541380. Due to the nature of the technical data involved, the contractor must maintain CMMC Level 2 compliance. Interested parties should note the response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Shoulder Screw Manufacturing and Supply

Spring (Heavy Gauge) Manufacturing

POSTED

about 2 hours ago

DEADLINE

Supply of Retaining Rings (NSN 5325013106732)This subcontract involves the manufacture or procurement of retaining rings for prime contractors supporting DLA supply contracts. The specific requirements call for rings matching part number 2144-0088 and national stock number 5325013106732, with a delivery quantity of one unit shipped FOB Destination. The contractor must ensure strict adherence to military and safety standards, including marking per MIL-STD-129 and packaging according to RP001 and MIL-STD-2073-1E using JA wrap material. Additionally, all hazardous material labeling must comply with 29 CFR 1910.1200. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

Tapping Screw Procurement (NSN 5305-00-998-3248)This subcontract involves the procurement of 17 tapping screws for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing screws that strictly adhere to NSN 5305009983248 and the DLA Master List of Technical and Quality Requirements. Performance will take place at Davis Monthan AFB, with all items required to be packaged according to MIL-STD-129 and ASTM D3951 and palletized per RP001. The contractor must maintain compliance with Buy American regulations and DFARS 252.204-7012 cybersecurity standards. Final delivery requires the submission of invoices and receiving reports through the Wide Area WorkFlow system. This requirement falls under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

Steel Stock Supply for Fastener ProductionThis subcontract involves the supply of raw steel stock for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the delivery of certified steel sheet or coil that adheres to the specific metallurgical and hardness standards outlined in MS27151C. To ensure quality and compliance, the provider must submit Material Test Reports certifying the origin and composition of the steel and must strictly comply with the Buy American Act. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division, with performance taking place in Barstow, California. This procurement falls under NAICS code 332999 and was posted on November 6, 2026, with a response deadline of November 13, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

Cadmium Plating for Steel FastenersThis subcontract involves providing specialized chemical plating services for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work focuses on the surface preparation and cadmium coating of stamped steel nuts in accordance with MS27151C standards. Utilizing electroplating tanks and chemical baths, the contractor is responsible for applying the coating and verifying both adhesion and plating thickness to ensure quality compliance. The project is based in Barstow, California, and falls under NAICS code 332813. Due to the nature of the materials used, the contractor must maintain all necessary environmental permits for the handling of cadmium. The final deliverable for this engagement is the provision of fully processed cadmium-plated steel nuts.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 2 hours ago

DEADLINE

Stamped Steel Nut Fabrication (Unplated)This subcontract involves the fabrication of unplated stamped steel nuts for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The scope of work requires the use of industrial stamping presses and custom dies to form steel stock into nut geometry in strict accordance with MS27151C Revision C. Quality assurance is a critical component of the contract, requiring the execution of zero-based sampling plans per MIL-STD-1916 or ASQ H1331 to ensure all delivered components meet precise dimensional specifications. The performance of this contract is centered in Barstow, California, under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

Specialized Alloy/Steel Supply for FastenersThis subcontract involves the supply of specialized alloy and steel raw metal stock, including bars, wire, or billets, to support prime contractors working on projects for the DLA Weapons Support ASC Commodities Division. The materials must strictly adhere to metallurgical and hardness specifications for NSN 5305-00-616-2095 and comply with the DLA Master List of Technical and Quality Requirements. To verify material purity and grade, the supplier is required to furnish Material Test Reports or Certificates of Conformance and manage the delivery of the stock directly to the manufacturer. The project is categorized under NAICS code 331110 and is performed in Corpus Christi, Texas. Interested parties should note the response deadline of November 13, 2026, for this Department of Defense requirement.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 2 hours ago

DEADLINE

Precision Setscrew Fabrication (NSN 5305-00-616-2095)This subcontract involves the fabrication of 155 setscrews for prime contractors supporting DLA Weapons Support ASC projects. All parts must be manufactured according to NSN 5305-00-616-2095 and the DLA Master List of Technical and Quality Requirements. The contract strictly mandates the use of traditional manufacturing processes, as additive manufacturing is explicitly prohibited. Finished and packaged components must undergo quality sampling in accordance with MIL-STD-1916 or ASQ H1331. To be eligible, the provider must maintain SAE AS9003 or ISO 9001 quality systems and ensure full compliance with NIST SP 800-171 standards. The work is associated with NAICS code 332722 and will be performed in Corpus Christi, Texas. Interested parties must respond by November 13, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

Radio Frequency (RF) Cable Assembly SupplierThis subcontract through the Department of Defense DLA Weapons Support ASC Commodities Division requires the supply of two radio frequency cable assemblies matching NSN 5995-01-217-1323. The supplier is responsible for manufacturing or sourcing these items for prime contractors supporting DLA Distribution supply contracts, with delivery terms set as FOB Origin and performance located in New Cumberland. Strict adherence to military standards is required, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Additionally, the provider must ensure full compliance with DFARS 252.204-7016 concerning the prohibition of certain telecommunications equipment. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, under NAICS code 335999.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

Supply of Machine Screws (NSN 5305015041494)

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

Annular Ball Bearing Supply

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 2 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract involves providing military-grade packaging, marking, and palletization services for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires the processing of 2,500 screws, ensuring all items are packaged according to MIL-STD-2073-1E and labeled in compliance with MIL-STD-129. The contractor must utilize MIL-SPEC preservation materials and industrial equipment to prepare the shipment for FOB Origin delivery to the DLA Distribution Depot at Hill Air Force Base, Utah. The project falls under NAICS code 488510 and is managed by the Department of Defense. Key deadlines include a posting date of November 6, 2026, with a response deadline set for November 13, 2026. All deliverables must meet strict military standards for preservation and shipping to ensure the integrity of the components during transit to the final destination.

Freight Transportation Arrangement

POSTED

about 2 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Aerospace Component Testing and Calibration

Navsup Weapon Systems Support

POSTED

about 7 hours ago

DEADLINE

Gas Purity and Equipment Cleanliness Testing

Portsmouth Naval Shipyard Gf

POSTED

about 7 hours ago

DEADLINE

B533--VANIHCS SPS Water Testing (VA-27-00000760)

Solicitation # 36C25027Q0096

250-NETWORK Contract Office 10 (36C250)

POSTED

about 7 hours ago

DEADLINE

in about 1 month

F103--D AND D LABORATORY STEAM & WATER TESTING

Solicitation # 36C24627Q0096

246-NETWORK Contracting Office 6 (36C246)

POSTED

about 7 hours ago

DEADLINE

Synopsis – Chemical Sampling and Testing of Dredged Material for USACE New York District

Solicitation # W912DS27BA002

W2SD Endist New York

POSTED

about 7 hours ago

DEADLINE

Third-Party Source Inspection and Quality Certification

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Testing (FAT) and Quality Validation

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

First Article Test (FAT) and Quality Validation Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Testing and Validation Services

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

First Article Test (FAT) Validation Services

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Precision Component Inspection Services

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Dimensional Inspection and Certification Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS