Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aerospace Surface Treatment and Finishing

Open

Federal

Response Deadline11/16/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Aerospace Surface Treatment and Finishing subcontract involves providing specialized surface treatments and coatings for supports and inserts under DLA Weapons Support ASC projects. The selected contractor must apply coatings according to specific technical drawings and adhere to Hazard Communication Standard 29 CFR 1910.1200. All finished components must be delivered with certified coating reports to ensure quality and compliance. To be eligible, contractors must possess NADCAP accreditation and have access to industrial plating and anodizing equipment. This opportunity is managed by the Department of Defense under NAICS code 332813, with performance taking place in New Cumberland. The response deadline for this requirement is November 16, 2026.

General Info

NADCAP accredited contractor provides aerospace surface treatments for DLA by November 16, 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A5-27-T-2888.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SUPPORT AND INSERTS

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 8

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 12:00:00 PM ESTin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized surface treatments and coatings for prime contractors on DLA Weapons Support ASC projects. Applies coatings to Support and Inserts (NSN 2915-00-962-9035) per technical drawings and Hazard Communication Standard 29 CFR 1910.1200. Requires NADCAP accreditation and industrial plating/anodizing equipment. Delivers finished components with certified coating reports.

Similar Contracts

Same NAICS industry code

Specialized Surface Treatment and FinishingThis subcontract for Specialized Surface Treatment and Finishing supports the DLA Weapons Support Land Supply Chain by providing surface treatment and plating for mounting brackets. The contractor is responsible for applying finishes in strict accordance with the 19207 series drawings and QAP 16236 / SQAPCARCLTPHOS81361 specifications using industrial plating tanks and chemical conversion processes. The project is categorized under NAICS code 332813 and will be performed in New Cumberland. Due to the nature of the work, the contractor must maintain full compliance with environmental regulations and ITAR/EAR export controls to ensure the secure delivery of finished, coated components.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Phosphate Coating ServicesThis subcontract for Phosphate Coating Services supports the DLA Weapons Support Land Supply Chain by providing specialized coating for bow handles. The selected provider must perform all work in strict accordance with technical drawings and RQ036 Phosphate Coating Supplier Certification Requirements. To qualify, the contractor must possess industrial phosphate plating tanks and maintain full ITAR and EAR compliance for the handling of controlled hardware. The project is managed under NAICS code 332813 for the Department of Defense, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must adhere to the response deadline of November 19, 2026, to provide the required phosphate-coated deliverables.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Zinc Coating and Finishing for Critical FastenersThis subcontract involves providing specialized zinc coating and finishing services for critical steel hexagon nuts supporting DLA Weapons Support ASC projects. The contractor is responsible for utilizing industrial plating baths to apply the coating, ensuring that the entire process is strictly free of mercury, mercury compounds, and hexavalent chromium. All work must be performed in accordance with environmental regulations and the specific technical requirements outlined in the prime contract. The project is managed under the Department of Defense and requires the delivery of finished fasteners ready for final inspection. Performance will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 16, 2026, for this effort categorized under NAICS code 332813.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Aerospace Component Finishing and CoatingThe Aerospace Component Finishing and Coating subcontract involves providing specialized surface treatment and coating services for prime contractors supporting DLA Weapons Support ASC projects. The scope of work includes applying anodizing, passivating, or painting to bracket components in strict accordance with technical drawings and the DLA Master List of Technical and Quality Requirements. The contractor is responsible for ensuring that all finish thickness and adhesion meet rigorous military specifications before delivering the finished components. This opportunity is a total small business set-aside under NAICS code 332813, managed by the Department of Defense for the DLA Weapons Support ASC Supplier OE and AF Division. Performance will take place in Portsmouth, New Hampshire. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

Aerospace Finishing and Coating for Actuating HeadsThis subcontract involves providing specialized aerospace finishing and coating services for Linear Actuating Cylinder Heads to support prime contractors under the DLA Weapons Support ASC. The scope of work requires the application of aerospace-grade plating or anodizing in strict accordance with TDP specifications to ensure necessary corrosion resistance. All delivered components must adhere to ASTM D3951 packaging standards. The project is managed by the Department of Defense and will be performed at Tinker AFB. To be eligible, providers must maintain ISO 9001:2015 certification and ensure full ITAR compliance. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

Industrial Coating/Plating (Black Finish)This subcontract involves the application of an industrial black finish for prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. The scope of work requires the coating of 439 precision socket head cap screws, specifically Part Number AES14U164500BB3AB7, using industrial plating or coating tanks. A critical requirement of the project is the maintenance of tight tolerances for 0.164-32 UNC-3A threading throughout the finishing process. The project is categorized under NAICS code 332813 and will be performed in New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 16, 2026, following the posting date of November 8, 2026. The final deliverable consists of the completed screws meeting all specified black coating requirements.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Cadmium and Chromate Plating ServicesThis subcontract for the Department of Defense DLA Weapons Support ASC Commodities Division involves providing specialized chemical plating and finishing services for steel screw substrates. The selected contractor will be responsible for applying cadmium plating and chromate finishes that strictly adhere to NASM24629 thickness and adhesion standards. To qualify, the provider must possess industrial plating tanks and maintain a quality management system compliant with either ISO 9001 or SAE AS9003. The project is categorized under NAICS code 332813 and will be performed at Hill AFB. Interested parties must respond by November 16, 2026, to provide the required plated and finished steel screws as specified in the contract requirements.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Phosphate Coating ServicesThis subcontract opportunity is for the provision of specialized phosphate coating services to support prime contractors on DLA Weapons Support Land Supply Chain projects. The scope of work involves applying phosphate coatings to cast and machined metal weapon mounts using industrial plating tanks, with a strict requirement that no Class I ozone-depleting chemicals are used in the process. All work must be performed in accordance with the technical data package, and the successful contractor must maintain ITAR registration and hold the necessary phosphate coating certifications. The project is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 332813. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by November 19, 2026, to provide the required coated weapon mounts for the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Ferrous Surface Treatment and Coating (P19)This subcontract for the DLA Weapons Support Land Supply Chain involves providing specialized surface treatment and P19 coating for mounting brackets. The scope of work includes comprehensive surface preparation and cleaning of bare ferrous surfaces to ensure corrosion prevention in accordance with strict military specifications. All finished components must be delivered ready for final inspection. The project is categorized under NAICS code 332813 and will be performed in New Cumberland. Due to the nature of the defense articles involved, the contractor must maintain full ITAR and EAR compliance. The solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Specialized Plating and Phosphate CoatingThis subcontract, titled Specialized Plating and Phosphate Coating, is a total small business set-aside issued by the Department of Defense for the DLA Weapons Support LSO Combat Vehicles and Armament. The project involves performing phosphate coating and surface treatments on pedal components for prime contractors. All work must be executed in strict accordance with Reference QAP 16236 SQAPCARCLTPHOS81361 and CDRL-81361CARPH-17272, while maintaining full compliance with FED-STD-313. The contractor is required to ensure that no Class I Ozone Depleting Chemicals are used during the process and must hold JCP certification to access necessary technical drawings. Performance of the contract will take place in New Cumberland, Pennsylvania. The solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026, under NAICS code 332813.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 5 hours ago

DEADLINE

Environmental Coating and Finishing ServicesThis subcontract for Environmental Coating and Finishing Services supports the DLA Weapons Support Land Supply Chain by providing protective coatings for prime contractors. The scope of work requires the application of surface treatments in strict accordance with Drawing 19207 12443771, with a specific prohibition on the use of hexavalent chromium and Class I ozone-depleting chemicals. All finished coated panels must meet the specifications of Federal Standard No. 313, and the contractor is responsible for providing Safety Data Sheets as mandated by 29 CFR 1910.1200(g). The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813 for the Department of Defense. Interested parties must submit their responses by November 23, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

NADCAP Certified Phosphate and CARC Coating ServicesThis subcontract involves providing specialized chemical surface treatments for the DLA Weapons Support Land Supply Chain. The scope of work requires the application of phosphate coatings according to MIL-STD-171, MIL-DTL-16232, and TT-C-490, as well as the application of high-temperature coatings and Chemical Agent Resistant Coatings using industrial coating tanks. The primary deliverable for this effort is one finished Loop Clamp with certified coatings. To be eligible for this project, the contractor must hold PRI/NADCAP certification specifically for the phosphate process. Performance will take place at Hunter AAF, and the project falls under NAICS code 332813. Interested parties must respond by November 19, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

Supply of Self-Locking Plate Nuts (NSN 5310016696897)This subcontract involves the manufacture or procurement of 853 self-locking plate nuts, part number BACN10KE3B2CD, to support prime contractors delivering DLA supply contracts for The Boeing Company. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, with performance taking place at Tinker AFB. All components must adhere to FAA airworthiness standards and require FAA Airworthiness Approval. Quality assurance must be conducted using zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331, and the provider must ensure full supply chain traceability per RQ018. Final delivery must include the required units along with Certificates of Airworthiness and Conformance.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of NSN 4710-00-0033939 (Bell Textron Component)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, requires the supply of one unit of NSN 4710-00-0033939. The required part must be sourced as Bell Textron part number 212-060-737-021 or 212-060-737-21. Performance of this contract takes place in Cherry Point, and the work falls under NAICS code 336413. The contractor must adhere to strict military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and either MIL-STD-1916 or ASQ H1331 for sampling and inspection. Additionally, the supplier is required to maintain compliance with DFARS 252.225-7001. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

Aerospace Component Packaging and ShippingThe Aerospace Component Packaging and Shipping subcontract involves providing specialized packaging and logistics services for prime contractors supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The scope of work requires the packaging of critical valve disks following ASTM D3951 standards and the palletization of shipments according to RP001. Additionally, the contractor must ensure all marking and labeling comply with MIL-STD-129 for the delivery of 78 units of hardware to DLA Distribution San Joaquin. Performance for this contract will take place in Tracy, California. The opportunity was posted on November 8, 2026, with a response deadline of November 16, 2026. This project falls under NAICS code 488510 and is managed under the Department of Defense.

Freight Transportation Arrangement

POSTED

about 5 hours ago

DEADLINE

Manufacture of Valve Disks (P/N 3169241-2)This subcontract involves the manufacture of 78 valve disks for prime contractors supporting DLA Weapons Support ASC projects. The components must be fabricated according to NSN 4810014875190 and Honeywell Aerospace P/N 3169241-2 specifications. Due to the nature of the parts as Critical Application Items, the project requires precision machining and strict adherence to zero-non-conformance sampling standards per MIL-STD-1916 or ASQ H1331. The contractor is required to maintain DFARS 252.204-7012 compliance and ensure all bare items are marked in accordance with RQ017. Performance of the contract will take place in Tracy, California, under NAICS code 336413. The final deliverable consists of 78 finished valve disks meeting all specified technical and regulatory requirements.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

Aircraft Access Cover Manufacturer/SupplierThis subcontract, issued by the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division, requires the manufacture or procurement of five aircraft access covers under NSN 1560002470215. The supplier must ensure all units meet strict technical specifications and comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contract mandates the use of domestic materials and explicitly prohibits the use of additive manufacturing unless prior authorization is granted. Final delivery of the five units is subject to acceptance via origin inspection. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026, falling under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

Key Washer Production and SupplyThis subcontract involves the production and supply of 52 key washers, identified by NSN 5310-00-888-3714, to support prime contractors fulfilling DLA supply contracts. The selected provider is responsible for manufacturing or sourcing the components to meet strict government specifications and ensuring all items are marked according to MIL-STD-129. Logistics will be managed through First Destination Transportation to ensure proper delivery. The contract is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, with the place of performance located at Tinker AFB. Operating under NAICS code 332722, the procurement process includes a response deadline of November 16, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

Manufacturing of Metal Tube Assemblies (NSN 4710-01-691-2876)This subcontract involves the manufacture and supply of two metal tube assemblies, identified by NSN 4710-01-691-2876, for prime contractors supporting the DLA Weapons Support ASC Supplier OEM Division. The contractor is responsible for fabricating components according to Bell Textron Inc P/N 901-060-132-101 specifications, with performance taking place in Cherry Point. Strict adherence to quality and regulatory standards is required, including ISO 9001:2015 certification and DFARS 252.225-7001 compliance. The scope of work includes bare item marking per RQ017 and MIL-STD-129, sampling according to MIL-STD-1916 or ASQ H1331, and packaging in accordance with MIL-STD-2073-1E.

POSTED

about 5 hours ago

DEADLINE

Aviation Rod End Clevis SupplyThis subcontract, issued by the Department of Defense through the DLA Weapons Support ASC Supplier Order OEM Division, involves the procurement of eight high-precision aviation rod end clevises. The required components must be Lockheed Martin part number 235A931-1, identified by NSN 1640-01-555-4479. Because these are classified as Critical Application Items, they must adhere to strict aviation safety and quality standards. Eligible providers must be authorized manufacturers or authorized distributors for Lockheed Martin Corporation to ensure the authenticity and certification of the aviation-grade hardware. The performance of this contract is centered in Jacksonville, and the response deadline for the solicitation is November 16, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

MIL-SPEC Aerospace Component PackagingThis subcontract involves the provision of specialized packaging materials and professional packing services for precision aerospace components supporting DLA Weapons Support ASC projects. The contractor is responsible for ensuring all components are packed according to MIL-STD-2073-1E and DLA requirements, specifically utilizing preservation material MAT:49 and wrapping material MAT:GB. All shipments must be marked in accordance with MIL-STD-129 for delivery to DLA Distribution Cherry Point, ensuring gears are fully prepared for FOB Origin shipment. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, the project falls under NAICS code 488510. The place of performance is located in Cherry Point, North Carolina. Interested parties should note the response deadline of November 16, 2026, for this specialized aerospace logistics requirement.

Freight Transportation Arrangement

POSTED

about 5 hours ago

DEADLINE

Precision Spur Gear FabricationThis subcontract involves the fabrication of nine high-precision spur gears, specifically Honeywell Aerospace US LLC part number 3860118-2, for the DLA Weapons Support ASC Supplier OEM Division. The project requires the use of aerospace-grade alloys and precision gear cutting and grinding machinery to meet strict technical specifications. Performance will take place in Cherry Point, North Carolina, under NAICS code 333613. To ensure compliance and quality, the contractor must complete a CMMC Level 2 Self-Assessment and adhere to quality sampling standards per MIL-STD-1916 or ASQ H1331. The final deliverable consists of nine finished and inspected spur gears. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing specialized military-grade packaging and marking services for prime contractors supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The scope of work requires the packaging of 13 units in strict accordance with MIL-STD-2073-1E, specifically utilizing Preservation Method 41, Cleaning/Drying 1, Preservative Material 02, and Wrap Material GH. All items must be marked according to MIL-STD-129 using approved MIL-SPEC wrapping and cushioning materials to ensure compliance with Department of Defense standards. The project is designated under NAICS code 488510 and will be performed in New Cumberland, Pennsylvania. Once the packaging and marking processes are complete, the units are to be delivered for FOB Origin shipment to DLA Distribution. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

Freight Transportation Arrangement

POSTED

about 5 hours ago

DEADLINE

Transmission Clutch Plate Retainer ManufacturingThis subcontract involves the manufacture and supply of 13 Transmission Clutch Plate Retainers for prime contractors supporting the DLA Weapons Support ASC. The project requires the production of part number 23091257 per NSN 2520-01-737-7674 specifications, utilizing precision machining to adhere to strict aerospace tolerances. All items must comply with RQ017 Physical Identification and Bare Item Marking standards. The contract mandates strict quality control with a zero-non-conformance requirement under MIL-STD-105/ASQ Z1.4 and full compliance with the Buy American Act. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 336412. The response deadline for this Department of Defense requirement is November 16, 2026.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 5 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Cadmium Plating for Aerospace CRES Components

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

Precision Coating and Finishing for Engine Brackets

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 5 hours ago

DEADLINE

Industrial Coating and Finishing for Vehicular Components

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Brown Anodizing for Aluminum Components

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

Phosphate and Manganese Coating Services

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 5 hours ago

DEADLINE

Aerospace Component Finishing and Coating

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

Specialized Chemical Coating and Phosphating

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 5 hours ago

DEADLINE

Specialized Plating and Surface Treatment for Aerospace Pins

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Aerospace-Grade Surface Treatment and Finishing

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

Surface Finishing and Coating for Electronic Housings

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 5 hours ago

DEADLINE

Phosphate Coating Services

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Industrial Coating and Surface Finishing for Control Pedals

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 5 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS