Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aerospace Surface Treatment and Finishing

Open

Federal

Response Deadline11/13/2026, 11:00:00 AM CST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Aerospace Surface Treatment and Finishing involves providing specialized plating and surface treatment services for aircraft components under the DLA Weapons Support ASC. The scope of work requires the application of aerospace-grade coatings to structural supports, ensuring all deliverables meet strict Boeing technical specifications. Operations must be conducted in full compliance with FED-STD-313 and 29 CFR 1910.1200 hazardous material standards. The work is performed at Tinker AFB, with the project falling under NAICS code 332813 and managed by the Department of Defense.

General Info

Subcontract for aerospace surface treatment and plating services at Tinker AFB for DoD.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A5-27-T-2640.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SUPPORT, STRUCTURAL COM

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 6

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 11:00:00 AM CSTin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs surface treatment and plating for prime contractors on DLA Weapons Support ASC aircraft component projects. Applies aerospace-grade coatings to structural supports in compliance with FED-STD-313 and 29 CFR 1910.1200 hazardous material standards. Delivers finished, coated structural components meeting Boeing technical specifications.

Similar Contracts

Same NAICS industry code

Industrial Coating and Surface TreatmentThis subcontract for Industrial Coating and Surface Treatment supports the DLA Weapons Support Land Supply Chain by providing essential corrosion prevention for shaft couplings. The selected contractor will be responsible for applying specific finishes through industrial plating, powder coating, or anodizing processes in strict accordance with provided technical drawings. All work must be performed using equipment that complies with environmental regulations, specifically prohibiting the use of Class I ozone-depleting chemicals. To ensure high-quality deliverables, the contractor must adhere to ISO 9001 quality standards. The project is associated with NAICS code 332813 and will be performed in New Cumberland. Interested parties must submit their responses by November 16, 2026, to provide the finished and coated components required by the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Aerospace Grade Finishing and Plating ServicesThis subcontract for Aerospace Grade Finishing and Plating Services supports the DLA Weapons Support Land Supply Chain. The scope of work involves performing surface treatment and plating for prime contractors, specifically applying aerospace coatings to P/N 1534AS402-2 brackets. All work must be completed without the use of Class I Ozone Depleting Chemicals and must adhere to FED-STD-313 and Boeing specifications. The project is managed under NAICS code 332813 and requires the provision of MSDS for all hazardous materials in compliance with 29 CFR 1910.1200. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Cadmium Plating for Steel FastenersThis subcontract involves providing specialized chemical plating services for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work focuses on the surface preparation and cadmium coating of stamped steel nuts in accordance with MS27151C standards. Utilizing electroplating tanks and chemical baths, the contractor is responsible for applying the coating and verifying both adhesion and plating thickness to ensure quality compliance. The project is based in Barstow, California, and falls under NAICS code 332813. Due to the nature of the materials used, the contractor must maintain all necessary environmental permits for the handling of cadmium. The final deliverable for this engagement is the provision of fully processed cadmium-plated steel nuts.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Metal Preservation and Lubrication ServicesThis subcontract for Metal Preservation and Lubrication Services supports prime contractors on projects for the DLA Weapons Support Land Supply Chain. The scope of work involves applying preservation materials to bare metal surfaces and lubricating moving parts in accordance with preservation method 33 and material 49. All activities must strictly adhere to MIL-STD-2073-1E standards to ensure housing parts are properly preserved and lubricated prior to final packaging. The project is managed under NAICS code 332813 for the Department of Defense, with the place of performance located in Tracy, California. Interested parties should note the response deadline of November 16, 2026, for this specific procurement effort.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Aerospace Finishing and Coating ServicesThe Aerospace Finishing and Coating Services subcontract is a total small business set-aside under the Department of Defense for the DLA Weapons Support Nuclear Reactor Program. The selected contractor will perform specialized surface treatments and coatings for prime contractors, ensuring all work adheres to the Technical Data Package and strictly prohibits the use of Class I Ozone Depleting Chemicals during cleaning or application. All finished components must be delivered ready for final assembly. Performance for this contract will take place in San Diego, California, under NAICS code 332813. Due to the nature of the nuclear reactor program, the contractor must maintain full ITAR and EAR compliance. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 11 hours ago

DEADLINE

Bracket Surface Treatment and CoatingThis subcontract involves providing specialized surface treatment and coating services for seat brackets under the DLA Weapons Support LSO Combat Vehicles and Armament. The scope of work includes cleaning and preparing metal surfaces and applying protective finishes such as paint, zinc plating, or powder coating in strict accordance with the DLA Master List for NSN 2540-01-658-9205. To successfully execute this contract, the provider must possess industrial-grade equipment, including plating tanks, curing ovens, and coating booths. The project is categorized under NAICS code 332813 and will be performed in New Cumberland, Pennsylvania. Interested parties should note that the solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026. The final deliverable for this engagement is the delivery of fully coated and finished seat brackets to the prime contractor.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 11 hours ago

DEADLINE

Specialized Coating and Surface Treatment for Aircraft BracketsThis subcontract involves providing specialized aerospace-grade finishes, platings, and coatings for aircraft brackets supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The selected contractor is responsible for performing surface preparation and application in strict accordance with Rolls-Royce technical data packages, while ensuring all coating thickness and adhesion meet specified standards. The project requires full compliance with FED-STD-313 for the handling of hazardous materials and adherence to the DLA Master List quality requirements. All finished brackets must be delivered with certified surface treatments. Performance of these services will take place in Tracy, California, under NAICS code 332813.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 11 hours ago

DEADLINE

Surface Treatment and FinishingThis subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, involves providing surface treatment and finishing services for prime contractors. The scope of work includes applying plating, anodizing, or heat treating to shafts in strict accordance with reference drawings STP51-410 and STP58-102, with a final requirement to deliver components with verified coating thickness. The project is designated as a Total Small Business Set-Aside under NAICS code 332813. Compliance requirements include a strict prohibition on the use of Class I Ozone Depleting Chemicals and the necessity of ITAR approval to access essential technical drawings. The solicitation was posted on November 6, 2026, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Aerospace Component Finishing and CoatingThe Aerospace Component Finishing and Coating subcontract involves providing specialized surface treatment and finishing services for aircraft hinges on behalf of prime contractors for the DLA Weapons Support ASC. The scope of work requires the application of protective coatings or plating using industrial plating tanks and non-hexavalent chromium compliant chemicals to ensure components are ready for final assembly. This project is managed under the Department of Defense and will be performed in San Diego, California. Due to the nature of the chemical processes involved, the contractor must maintain strict environmental compliance certifications regarding the handling and disposal of hazardous materials. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

Industrial Painting and Coating for JMIC 3.0KThis subcontract involves the supply and application of tan industrial coatings for structural components of the JMIC 3.0K on behalf of prime contractors for DLA Troop Support projects. The scope of work includes comprehensive surface preparation and the application of military-specification paint, with a strict requirement to comply with environmental restrictions regarding the prohibition of asbestos and the intentional addition of mercury. Managed under the Department of Defense and Construction & Equipment Containers, the project is based in Jacksonville, Florida. The contract falls under NAICS code 332813 and requires the delivery of fully finished and coated structural components.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 11 hours ago

DEADLINE

Valve Stem Surface Treatment and CoatingThis subcontract involves providing specialized surface treatments and coatings for fluid valve stems under NSN 4820-01-546-9932 to support prime contractors on DLA supply contracts. The scope of work requires the application of protective plating and coatings using industrial plating tanks and anodizing equipment to guarantee seal integrity and corrosion resistance. All work must be performed in strict accordance with the DLA Master List of Technical and Quality Requirements. The project is managed by the Department of Defense through DLA DIST San Joaquin, with the place of performance located in Tracy, California. Classified under NAICS code 332813, the contract was posted on November 6, 2026, with a response deadline of November 16, 2026. The final deliverable consists of finished, coated valve stems that meet all specified technical standards.

DLA DIST SAN JOAQUIN

POSTED

about 11 hours ago

DEADLINE

Defense-Spec Surface Treatment and FinishingThis subcontract for Defense-Spec Surface Treatment and Finishing supports the DLA Weapons Support Fluid Handling Division by providing specialized coating and finishing services for prime contractors. The scope of work involves applying finishes in strict accordance with the Technical Data Package and the DLA Master List of Technical and Quality Requirements, utilizing industrial plating lines that meet all applicable military specifications. A critical safety and quality requirement is the absolute prohibition of mercury during the finishing process. The project is categorized under NAICS code 332813 and will be performed in Bremerton, Washington. Interested parties must adhere to the timeline established by the Department of Defense, with the response deadline set for November 16, 2026. The final deliverable for this engagement is the provision of fully finished and coated components that meet all specified defense standards.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 11 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

Special Purpose Electrical Cable Assembly SupplyThis subcontract involves the manufacture or procurement of six special purpose electrical cable assemblies matching NSN 5995015840982 for the DLA Weapons Support ASC Supplier Oper OEM Division. The project requires strict adherence to MIL-STD-129 marking standards and First Destination Transportation delivery requirements, with performance taking place in San Diego. To be eligible, the provider must maintain NIST SP 800-171 cybersecurity compliance and provide certification against the use of prohibited telecommunications equipment. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, under NAICS code 334419.

Other Electronic Component Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Dial Indicating Pressure GagesThis subcontract involves the supply of 25 dial indicating pressure gages for prime contractors supporting DLA Weapons Support ASC projects. The contractor is responsible for manufacturing or sourcing gages that strictly adhere to NSN 6685014410843 specifications, ensuring all units are mercury-free per IP056 certification. Operational requirements include cleaning according to MIL-G-18997E and packaging in compliance with MIL-STD-2073-1E and RP001. Additionally, all items must be marked per MIL-STD-129 using Special Marking Code 05. The work is associated with NAICS code 334514 and will be performed in New Cumberland.

Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supplier of Temperature Indicating Controls (NSN 6685015018697)This subcontract involves the supply of four Temperature Indicating Controls under NSN 6685015018697 for the Department of Defense, specifically the DLA Weapons Support ASC Supplier OEM Division. The selected provider is responsible for manufacturing or sourcing hardware that strictly adheres to mercury restrictions and meets rigorous quality assurance standards per MIL-STD-1916 or ASQ H1331. All items must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129. The contract specifies FOB Origin delivery to DLA Distribution DDSP in New Cumberland, Pennsylvania. Operating under NAICS code 334511, the agreement requires the delivery of these specialized controls to support prime contractors fulfilling DLA supply requirements. The response deadline for this opportunity is November 13, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 11 hours ago

DEADLINE

Hinge Assembly Fabrication and SupplyThis subcontract involves the fabrication and supply of five hinge assembly units, identified by NSN 5340014718518, for prime contractors under the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division. The selected provider must manufacture the hardware according to strict technical specifications, utilizing MIL-STD-1916 for sampling and quality inspection, while adhering to MIL-STD-2073-1E and MIL-STD-129 for packaging and marking. Performance of the contract will take place in San Diego, California. To be eligible, the contractor must maintain ISO 9001:2015 certification and ensure CMMC Level 2 compliance. Additionally, the submission of Source Approval Request documentation is required. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, falling under NAICS code 332510.

Hardware Manufacturing

POSTED

about 11 hours ago

DEADLINE

Dial Window Manufacturing and SupplyThis subcontract involves the manufacture and supply of 13 dial windows, specifically NSN 5355-00-392087-1, for prime contractors supporting the DLA Weapons Support ASC Supplier OEM Division. The contractor must produce these units according to technical data provided via the DLA portal, ensuring all materials are of domestic origin. Quality control and logistics are strictly governed by military standards, requiring sampling plans per MIL-STD-1916 or ASQ H1331 Table 1 and packaging in accordance with MIL-STD-2073-1E. The final delivery of the packaged and marked units is to be made to the government destination at Hill AFB.

All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 11 hours ago

DEADLINE

Time Totalizing Meter Manufacturer/SupplierThis subcontract involves the supply of eight time totalizing meters for prime contractors working on DLA Weapons Support ASC projects. The supplier must provide meters that meet NSN 6645-01-486-1030 and adhere strictly to RA001 quality requirements and RQ025 mercury prohibitions. All items must be packaged and marked according to MIL-STD-129 and MIL-STD-2073-1E standards, with quality assurance inspections conducted per MIL-STD-1916 or ASQ H1331. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Operator OEM Division. Delivery of the compliant meters is required FOB Origin to DLA Distribution San Joaquin, with the place of performance located in Tracy, California. The procurement falls under NAICS code 334517.

Irradiation Apparatus Manufacturing

POSTED

about 11 hours ago

DEADLINE

Military-Grade Packaging and LabelingThis subcontract opportunity, titled Military-Grade Packaging and Labeling, involves providing specialized packaging and preparation services for prime contractors supporting the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division. The selected provider will be responsible for packaging critical application hardware according to ASTM D3951 standards and ensuring all labeling and marking comply with MIL-STD-129 using approved systems. The final deliverable consists of shipping-ready containers that meet all DLA packaging and marking requirements. The project will be performed in New Cumberland, Pennsylvania, under NAICS code 488510. Interested parties should note that the solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

Freight Transportation Arrangement

POSTED

about 11 hours ago

DEADLINE

Manufacturing of Straight Headed Pins (NSN 5315-0119-17595)This subcontract involves the manufacture of straight headed pins under NSN 5315-0119-17595 for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The selected contractor must utilize precision machining and forming equipment to fabricate the pins and ensure strict adherence to quality control and sampling standards per MIL-STD-1916 or ASQ H1331. Compliance with the Buy American Act is mandatory, and the provider must hold either SAE AS9003 or ISO 9001 certification. The scope of work requires the delivery of five finished pins FOB Origin to the DLA Distribution DDSP New Cumberland Facility. This opportunity falls under NAICS code 332510 and was posted by the DLA Weapons Support ASC Supplier OEM Division. Interested parties must submit their responses by November 13, 2026.

Hardware Manufacturing

POSTED

about 11 hours ago

DEADLINE

Loop Clamp SupplierThis subcontract involves the supply of loop clamps for prime contractors working on DLA Weapons Support ASC projects under the Department of Defense. The selected supplier is responsible for manufacturing or sourcing a specific loop clamp, NSN 5340-01-612-5776, ensuring it adheres to the DLA Master List of Technical and Quality Requirements. All items must be packaged according to MIL-STD-2073-1E and marked in accordance with MIL-STD-129. The contract requires the delivery of the completed hardware components to the designated destination point within 20 days of the award. Performance will take place in Lenoir, North Carolina, under NAICS code 332510. Interested parties must respond by the deadline of November 13, 2026.

Hardware Manufacturing

POSTED

about 11 hours ago

DEADLINE

Manufacturing and Supply of Electrical Rotating Equipment End BellsThis subcontract involves the manufacturing and supply of five specialized End Bell components for electrical rotating equipment to support DLA supply contracts. The work must be performed in accordance with the DLA Master List of Technical and Quality Requirements, with all quality inspections conducted under an ISO 9001:2015 certified system. Final products must be packaged and labeled according to ASTM D3951 and MIL-STD-129 standards. The contract is issued by the Department of Defense through the DLA Weapons Support ASC Supplier OEM Division, with performance located in San Diego. Compliance requirements include a CMMC Level 2 self-assessment and adherence to Buy American regulations. The response deadline for this opportunity is November 13, 2026.

Motor and Generator Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Electrical Component (NSN 6635016988852)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, requires the provision of one unit of electrical component NSN 6635016988852. The contractor is responsible for manufacturing or sourcing the item in strict accordance with the DLA Master List of Technical and Quality Requirements. Performance will take place in New Cumberland, Pennsylvania, with a response deadline set for November 13, 2026. The contract mandates rigorous adherence to military standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Quality assurance must follow MIL-STD-105/ASQ Z1.4, with a requirement for zero non-conformances. Additionally, the provider must ensure full compliance with the Buy American Act and meet NIST SP 800-171 cybersecurity assessment standards.

Analytical Laboratory Instrument Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Drip Pans (NSN 1660-01-727-3480)This subcontract involves the supply of five drip pans, identified by NSN 1660-01-727-3480, for prime contractors supporting the Department of Defense DLA Weapons Support ASC Supplier Order OEM Division. The selected provider must source exact products based on specific CAGE codes and part numbers, providing formal verification of their status as an authorized manufacturer or dealership. All items must be packaged according to MIL-STD-2073-1E standards and delivered FOB Destination. The contract operates under NAICS code 423830 and requires adherence to DFARS 252.215-7013 regulations regarding nontraditional defense contractors. Performance will take place in zip code 73145-8000, with a response deadline set for November 12, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 11 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Aerospace Component Finishing and Coating

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

Industrial Coating and Surface Treatment

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Phosphate Coating Services for Bow Handles

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Heat Treatment and Surface Finishing for Tooling

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Industrial Coating and Paint Finishing for Hydraulic Valves

DDSP NEW CUMBERLAND FACILITY

POSTED

about 11 hours ago

DEADLINE

Plating, Heat Treatment, and Surface Finishing Services

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Cadmium Plating Services

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 11 hours ago

DEADLINE

Aerospace Component Finishing and Coating

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Aerospace Surface Treatment and Finishing

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 11 hours ago

DEADLINE

Aerospace Surface Treatment and Finishing

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

Phosphate and Manganese Coating Services

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 11 hours ago

DEADLINE

Specialized Surface Treatment and Coating

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 11 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS