Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aerospace Surface Treatment and Finishing for Aircraft Floor

Open

Federal

Response Deadline11/13/2026, 11:00:00 AM CST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the application of specialized aerospace coatings and surface treatments for aircraft floor components supporting DLA Weapons Support ASC projects. The selected provider must perform anodizing and finishing in strict accordance with Engineering Notes 1-8 of Drawing 81205 to ensure critical application standards for structural components are met. All finished parts must be delivered with certified reports to verify compliance. The performance of this contract will take place at Tinker AFB. To be eligible, contractors must hold ISO 9001 or AS9100 certification and maintain JCP certification to ensure authorized access to necessary technical data. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

General Info

Aerospace coatings for aircraft floor components at Tinker AFB requiring ISO/AS9100 and JCP certifications.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-27-T-2944.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FLOOR, AIRCRAFT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 5

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 11:00:00 AM CSTin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Applies specialized aerospace coatings and surface treatments for prime contractors on DLA Weapons Support ASC projects. Performs anodizing and finishing per Engineering Notes 1-8 of Drawing 81205 to meet critical application standards for aircraft structural components. Requires ISO 9001 or AS9100 certification and JCP certification for technical data access. Delivers finished aircraft floor components with certified reports.

Similar Contracts

Same NAICS industry code

Gearshaft Heat Treatment and Surface FinishingThis subcontract involves providing specialized heat treating, hardening, and surface coating services for gearshaft components supporting DLA Weapons Support Land Supplier Operations. The scope of work includes applying case hardening, tempering, and corrosion-preventative surface finishing for part number 0352899, utilizing industrial heat-treatment furnaces and surface grinding equipment. All deliverables must strictly adhere to the quality standards outlined in the DLA Master List. The project is managed under the Department of Defense for the DLA Weapons Support Land Supplier Opns Wheeled Vehicles agency, with performance taking place in Tracy, California. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026. This requirement falls under NAICS code 332813.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

about 4 hours ago

DEADLINE

Aerospace Coating and Surface TreatmentThis subcontract for Aerospace Coating and Surface Treatment involves providing specialized coating and surface finishing services for actuator housings on DLA Weapons Support ASC projects. The selected contractor will be responsible for applying protective or functional coatings in strict accordance with technical drawings and the DLA Master List of Technical and Quality Requirements. To qualify, providers must possess industrial plating equipment and maintain certification under SAE AS9003 or ISO 9001 quality systems. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division, with performance taking place in New Cumberland. Interested parties must respond by November 13, 2026, regarding this opportunity categorized under NAICS code 332813. The final deliverable for this engagement is the provision of finished, coated actuator housings.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Aerospace Component Finishing and CoatingThis subcontract, titled Aerospace Component Finishing and Coating, involves providing specialized surface treatments and coatings for prime contractors supporting DLA aerospace supply contracts. The scope of work focuses on applying specific aerospace platings and anodizing to shaft and tube components to ensure corrosion prevention. All operations must be conducted without the use of Class I ozone-depleting chemicals to comply with strict contract restrictions, and all finished components must meet DLA quality standards. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Opns Vehicle Spt agency. Performance of the work will take place in New Cumberland, Pennsylvania. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026, and is categorized under NAICS code 332813.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 4 hours ago

DEADLINE

Aerospace Special Process Services (NADCAP)The Aerospace Special Process Services subcontract, issued by the Department of Defense DLA Weapons Support ASC Commodities Division, involves performing NADCAP-approved special processes for aircraft components. The scope of work includes heat treating, chemical processing, or anodizing as detailed in Drawing 20145214, with a strict requirement that the provider maintains current NADCAP approval for the specific processes executed. All delivered components must strictly adhere to established metallurgical and surface finish specifications. The performance of this contract is centered at Tinker AFB. Interested parties should note the posting date of November 5, 2026, with a response deadline set for November 13, 2026. The project falls under NAICS code 332813 and is managed through the DLA Weapons Support ASC.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

NADCAP Accredited Special Process FinishingThis subcontract opportunity is for the Department of Defense, specifically the DLA Weapons Support ASC, to provide specialized aerospace finishing for 49 structural brackets. The scope of work involves executing special processes such as anodizing, plating, heat treating, and non-destructive testing in accordance with technical drawing callouts using industrial furnaces and plating tanks. Performance will take place at Tinker AFB. To be eligible, contractors must hold NADCAP approval and maintain US/Canada Joint Certification to ensure full ITAR and EAR compliance. This is a total small business set-aside under NAICS code 332813. Interested parties must submit their responses by November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Aerospace Surface Treatment and Coating for Aircraft FairingsThis subcontract involves providing specialized aerospace surface finishing and coating services for aircraft fairings under the DLA Weapons Support ASC Commodities Division. The scope of work requires the application of aerospace-grade primers and anti-corrosive treatments in accordance with technical data for NSN 1560-01-147-8383. Performance will take place at Tinker AFB, utilizing industrial spray booths and curing ovens to deliver components ready for final assembly. To be eligible, contractors must hold ISO 9001:2015 or AS9100 certification. The opportunity was posted on November 5, 2026, with a response deadline of November 13, 2026. This project falls under NAICS code 332813 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Metal Finishing and Coating for Pin AssembliesThis subcontract for Metal Finishing and Coating for Pin Assemblies supports prime contractors on projects for the DLA Weapons Support ASC Commodities Division. The scope of work involves providing comprehensive surface treatment, plating, and coating services, including surface preparation, cleaning, and the application of protective coatings such as passivation, anodizing, zinc, and cadmium. All work must be performed in accordance with Drawing NR 19207 12369003 and the DLA Master List of Technical and Quality Requirements, utilizing industrial plating tanks and surface roughness testers to deliver finished coated pin assemblies. The project is categorized under NAICS code 332813 and will be performed in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 13, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing supports the DLA Weapons Support ASC Commodities Division within the Department of Defense. The selected provider will perform specialized surface coating, plating, and finishing services for prime contractors, specifically applying aerospace-grade finishes such as painting, anodizing, and chemical conversion coating. All work must adhere to Boeing technical requirements and be performed using certified spray booths or industrial plating tanks to deliver bracket components ready for final assembly. Performance will take place at Tinker AFB, and the contractor must maintain NADCAP accreditation and ISO 9001 compliance to ensure quality standards. Interested parties must respond by November 13, 2026, regarding this opportunity categorized under NAICS code 332813.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Gear Heat Treatment and Surface FinishingThis subcontract for Gear Heat Treatment and Surface Finishing supports the DLA Weapons Support Fluid Handling Division within the Department of Defense. The selected provider will perform specialized industrial processes including case hardening, tempering, nitriding, and precision surface grinding or polishing for gear components. All work must be executed according to Yale part number specifications and strictly adhere to the DLA Master List RA001 quality requirements. The project is categorized under NAICS code 332813 and will be performed at Hill AFB. Interested parties must respond by November 16, 2026, to provide the necessary heat-treated and finished components using industrial furnaces and precision grinding equipment.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

Aerospace Surface Treatment and CoatingThis subcontract for Aerospace Surface Treatment and Coating involves performing specialized surface treatments and protective coatings for prime contractors supporting DLA Weapons Support ASC projects. The scope of work focuses on applying industrial anodizing or chemical coating systems to aircraft skins in accordance with reference drawings 98897 and 98752 to ensure effective corrosion prevention. The final deliverables consist of finished, coated aircraft skin components. To qualify for this engagement, contractors must hold NADCAP accreditation and maintain either ISO 9001 or AS9100 certification. The work is to be performed at Robins Air Force Base. Interested parties should note the response deadline of November 13, 2026, for this Department of Defense requirement categorized under NAICS code 332813.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Aerospace Chemical Finishing and AnodizingThis subcontract for Aerospace Chemical Finishing and Anodizing supports the DLA Weapons Support Land Supply Chain by providing specialized chemical conversion coatings and anodizing services for access covers. The scope of work includes performing chemical treatments according to MIL-DTL-5541, anodizing per MIL-A-8625 Type I Class 1, and the application of MIL-PRF-23377 and MIL-F-18264. Due to the technical nature of these requirements, the contractor must possess specialized anodizing tanks and maintain strict ITAR compliance. The project is managed under NAICS code 332813 and will be performed at Tinker AFB. Interested parties must submit their responses by November 16, 2026, to support the Department of Defense in delivering these critical components.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

Aerospace Aluminum Heat TreatingThis subcontract for Aerospace Aluminum Heat Treating supports prime contractors on projects for the DLA Weapons Support Land Supply Chain. The scope of work involves the heat treatment of aluminum access covers to T42 temper specifications instead of the standard T4. Performance of these services will take place at Tinker AFB. Qualified providers must utilize industrial heat treat ovens that maintain aerospace certification and ensure full ITAR compliance. The contract is categorized under NAICS code 332813, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Supply of Aerospace-Grade Raw Materials for Structural SupportsThis subcontract involves the procurement and delivery of certified aerospace-grade raw materials, specifically alloys or composites for NSN 1560012090068, to support prime contractors fulfilling DLA supply contracts. The scope of work requires the supplier to provide Mill Test Reports and material certifications to guarantee compliance with aircraft structural standards and domestic origin requirements under the Buy American/Balance of Payments Program. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract is categorized under NAICS code 331210. Performance will take place at Tinker AFB, with a response deadline set for November 13, 2026. The supplier is responsible for the direct delivery of all certified raw materials to the manufacturer.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 4 hours ago

DEADLINE

Manufacturing of Aircraft Structural Support Components (NSN 1560012090068)This subcontract involves the manufacture of eight aircraft structural support components under NSN 1560012090068 for the Department of Defense, specifically the DLA Weapons Support ASC Supplier OE and AF Div. The work requires the use of precision machining and forming equipment to produce components for prime contractors. Performance will take place at Tinker AFB. The contractor must adhere to strict regulatory and quality standards, including domestic origin requirements, DFARS 252.223-7008, and DLA Packaging Requirements RP001. Additionally, the provider must maintain a quality system that complies with either SAE AS9003 or ISO 9001. The response deadline for this opportunity is November 13, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

MIL-SPEC Packaging and MarkingThis subcontract involves providing specialized packaging and marking services for critical aerospace components supporting prime contractors on DLA Weapons Support ASC projects. The scope of work requires the contractor to package housings using MIL-SPEC materials in accordance with ASTM D3951, apply markings and labels per MIL-STD-129, and perform palletization following RP001 DLA Packaging Requirements to ensure all items are shipment-ready. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the project is categorized under NAICS code 488410. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

Motor Vehicle Towing

POSTED

about 4 hours ago

DEADLINE

Precision Machining of Actuator HousingsThis subcontract involves the precision machining of two Actuator Housings, identified by NSN 1680008025650, for prime contractors supporting DLA Weapons Support ASC projects. The work must be performed using CNC machining centers in accordance with specific technical drawings and the DLA Master List of Technical and Quality Requirements for Critical Application Items, with a strict prohibition on the use of additive manufacturing. Eligible providers must hold SAE AS9003 or ISO 9001 certification and maintain CMMC Level 2 compliance. The project falls under NAICS code 332710 and is managed by the Department of Defense. Performance will take place in New Cumberland, Pennsylvania, with a response deadline set for November 13, 2026.

POSTED

about 4 hours ago

DEADLINE

Supply of Electronic Equipment Maintenance KitsThis subcontract involves the supply of four complete electronic equipment maintenance kits, specifically Material 5895017146794, to support prime contractors fulfilling DLA supply contracts. The provider is responsible for ensuring all equipment meets strict government material requirements and technical specifications, while managing all logistics for FOB Origin delivery. The contract is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place in Tracy, California. The supplier must adhere to all DLA inspection and acceptance standards to ensure compliance. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026, falling under NAICS code 423610.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 4 hours ago

DEADLINE

Manufacture and Supply of Fluid Pressure Filters (NSN 1650-00-367-2949)This subcontract involves the manufacture and supply of fluid pressure filters, specifically part number M8815/1-6, for prime contractors supporting DLA Weapons Support ASC projects. The contractor is responsible for ensuring all products meet MIL-F-8815/1A and QPL-8815-36 specifications. Quality assurance must be maintained through sampling and testing conducted according to MIL-STD-1916 or ASQ H1331, while packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129. The agreement requires the provider to hold ISO 9001:2015 certification and maintain strict compliance with the Buy American Act. The scope of work culminates in the delivery of two completed filters on an FOB Origin basis. Performance of the contract is centered in New Cumberland, Pennsylvania, under the oversight of the Department of Defense.

Iron and Steel Forging

POSTED

about 4 hours ago

DEADLINE

Supply of Hydraulic Hoist Valves (P/N BL-4038-3)This subcontract involves the procurement of three Hydraulic Hoist Valves, part number BL-4038-3 and NSN 1680-00-944-5741, to support prime contractors delivering for the Department of Defense. The selected supplier must ensure all units adhere to zero non-conformance standards and follow strict packaging and labeling guidelines according to ASTM D3951 and MIL-STD-129. Final delivery of the completed units is required at DLA Distribution San Diego. Compliance requirements for this contract include a CMMC Level 2 self-assessment and adherence to DFARS 252.225-7001. The opportunity is managed under NAICS code 332911 for the DLA Weapons Support ASC Supplier Oper AE and AF Div. Interested parties must submit their responses by November 13, 2026.

Industrial Valve Manufacturing

POSTED

about 4 hours ago

DEADLINE

Aerospace Component Packaging and MarkingThis subcontract for Aerospace Component Packaging and Marking supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves providing specialized packaging and marking services for four individually packaged and labeled Cylinder Retainers. All packaging must adhere to ASTM D3951 and RP001 standards, while markings and labeling must be fully compliant with MIL-STD-129. The project requires the use of MIL-STD-129 compliant labeling systems for delivery to Hill AFB via FOB Origin. This effort is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Hill AFB, zip code 84056-5734.

Freight Transportation Arrangement

POSTED

about 4 hours ago

DEADLINE

Manufacture of Cylinder Retainers (NSN 1650-00-199-8634)This subcontract involves the precision manufacture of four cylinder retainers under NSN 1650-00-199-8634 for the Department of Defense, specifically supporting the DLA Weapons Support ASC. The project requires the use of precision CNC machining to ensure all components are fabricated according to strict military specifications. Performance will take place at Hill AFB, with the work falling under NAICS code 336413. To ensure quality and security, the contractor must implement inspection systems compliant with SAE AS9003 or ISO 9001 and utilize sampling methods aligned with MIL-STD-1916 or ASQ H1331. Additionally, the provider is required to maintain Buy American Act compliance and complete a CMMC Level 2 self-assessment. The response deadline for this opportunity is November 13, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

Nonmetallic Bushing Fabrication (NSN 5365-01-670-1892)This subcontract involves the manufacture and supply of 56 nonmetallic bushings for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The contractor is responsible for fabricating the parts in accordance with TDP Rev A Gen 1 and Basic Drawing NR 53711 8628481, ensuring all sampling and inspection processes adhere to MIL-STD-1916 or ASQ H1331 standards. Finished goods are to be delivered FOB Origin to New Cumberland, Pennsylvania. To be eligible for this project, the provider must maintain strict regulatory and security certifications, including ITAR/EAR compliance, CMMC Level 2, and US/Canada Joint Certification Program certification. The opportunity is categorized under NAICS code 326199, with a response deadline set for November 13, 2026.

All Other Plastics Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

Defense-Compliant Packaging and Labeling ServicesThis subcontract for Defense-Compliant Packaging and Labeling Services involves providing specialized packaging, marking, and labeling for prime contractors fulfilling DLA supply contracts. The scope of work focuses on electrical components, requiring strict adherence to RP001 and MIL-STD-129 standards, which take precedence over ASTM D3951. All shipments must utilize MIL-SPEC materials and compliant labeling systems to ensure they are ready for delivery to DLA Distribution DDSP New Cumberland. Managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, the project falls under NAICS code 488410. The place of performance is located in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 13, 2026.

Motor Vehicle Towing

POSTED

about 4 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Aerospace Surface Finishing and Coating

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

Industrial Coating for Pivot Pin Extractors

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

Aerospace Surface Treatment and Finishing

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

Aerospace Surface Treatment and Coating

Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

Aerospace Special Process Treatment (NADCAP)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Phosphate Coating and Finishing Services

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 4 hours ago

DEADLINE

Phosphate Coating Services for Vehicular Yokes

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

Cadmium Plating for Steel Hardware

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

NADCAP Certified Phosphate/Black Oxide Coating Services

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

Precision Brazing for NVG Adapters

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS