Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aerospace Surface Treatment and Finishing for Turbine Intakes

Active

Federal

Response Deadline10/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing specialized surface treatments and protective coatings for turbine engine air intakes under the direction of prime contractors for the DLA Weapons Support ASC Commodities Division. The work must be performed in accordance with the technical data packages for part number NMM400180, with a strict requirement that no mercury-containing compounds are utilized during the plating process. To qualify for this project, the provider must maintain NADCAP certification for aerospace finishing. The scope of work culminates in the delivery of fully coated and finished air intake components, with performance taking place in New Cumberland.

General Info

NADCAP certified provider delivers mercury-free surface treatments for turbine engine air intakes.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-3344.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

AIR INTAKE, TURBINE ENG

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 12

subcontract

Response DeadlineOct 20

Submission deadline

Response Deadline

10/20/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized surface treatments and coatings for prime contractors on DLA Weapons Support ASC projects. Applies protective finishes to turbine engine air intakes per P/N NMM400180 technical data packages. Ensures zero mercury-containing compounds are used in the plating process. Requires NADCAP certification for aerospace finishing. Delivers coated and finished air intake components.

Similar Contracts

Same NAICS industry code

Aerospace Component Finishing and CoatingThis subcontract for Aerospace Component Finishing and Coating supports US Air Force B-2 aircraft projects by providing specialized final finishing, coating, and plating services for prime contractors. The scope of work involves applying aerospace-approved finishes to aluminum alloy surfaces using industrial coating tanks and curing ovens to ensure corrosion prevention and strict adherence to environmental specifications. The contractor is responsible for delivering finished and coated heat exchanger components, which includes performing rigorous inspections of finish thickness and adherence to meet all solicitation requirements. This Department of Defense project, managed by the Afsc Pzabb agency, falls under NAICS code 332813 and has a response deadline of November 10, 2026.

FA8118 Afsc Pzabb

POSTED

about 17 hours ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing involves providing specialized plating and coatings for aerospace-grade handles under NSN 1620-01-340-4323. The selected contractor will be responsible for ensuring all treatments meet strict corrosion and durability standards, which includes performing mandatory thickness and adhesion testing to deliver finished products ready for final inspection. This work supports prime contractors delivering on supply contracts for the Department of Defense, specifically the DLA Weapons Support ASC Supplier OE and AF Division. To be eligible, contractors must hold either ISO 9001:2015 or AS9100 certification. The project falls under NAICS code 332813 and will be performed in New Cumberland, Pennsylvania. Interested parties must respond by October 20, 2026, following the posting date of October 12, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract opportunity, titled Aerospace Surface Treatment and Finishing, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division. The project requires a contractor to perform specialized surface treatments and aerospace-grade coatings on machined piston rods. All work must adhere strictly to Boeing technical data packages and the DLA Master List of Technical and Quality Requirements, with a strong preference for providers holding SAE AS9100 certification. The scope of work includes the application of coatings and the subsequent verification of surface roughness and thickness using industrial plating systems. The contract is designated as a Total Small Business Set-Aside under NAICS code 332813, with the place of performance located at Hill AFB. Interested parties must submit their responses by October 20, 2026. The final deliverable for this engagement is the provision of finished, coated piston rods that meet all specified technical and quality standards.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Aerospace Grade Plating and Coating ServicesThe Aerospace Grade Plating and Coating Services subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves providing specialized surface treatment and plating for prime contractors. The scope of work focuses on applying protective coatings to plate nuts in accordance with Reference Drawing NR 76823 03A169, utilizing industrial plating baths and thickness testing equipment to ensure all coated fasteners meet strict aerospace specifications. Operating under NAICS code 332813, the performance of this contract takes place in New Cumberland. A critical requirement of the agreement is strict adherence to FAR 52.223-7 environmental regulations. The solicitation was posted on October 12, 2026, with a response deadline set for October 20, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Military-Grade Surface Treatment and CoatingThis subcontract for Military-Grade Surface Treatment and Coating supports the DLA Weapons Support LSO Combat Vehicles and Armament under the Department of Defense. The selected provider will apply protective coatings, plating, and finishes to combat vehicle hardware, specifically delivering finished levers. Work involves surface preparation and the application of anodizing, powder coating, or plating using industrial tanks and booths in accordance with specific technical data. Performance will take place in New Cumberland, Pennsylvania. The contractor must maintain certification for MIL-SPEC coatings and ensure strict compliance with hazardous waste disposal regulations. Interested parties should note the response deadline of October 23, 2026, for this project categorized under NAICS code 332813.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Aerospace Special Process Finishing/TreatmentThis subcontract, titled Aerospace Special Process Finishing/Treatment, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Div. The project involves performing specialized aerospace treatments, specifically heat treating, plating, or coating, for aircraft formers as specified in Drawing 20145214. Work is to be performed at Tinker AFB and is designated as a Total Small Business Set-Aside under NAICS code 332813. Strict compliance is required for all technical data handling under ITAR and EAR regulations. Additionally, the contractor must maintain NADCAP approval for all special processes and provide a NADCAP certification of conformance upon delivery of the processed components. The response deadline for this opportunity is October 20, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Magni 575 Black Coating ApplicationThis subcontract involves the application of specialized Magni 575 Black corrosion-resistant coating for Grade 8 hexagon head cap screws. Working under prime contractors for the Department of Defense DLA Weapons Support ASC Commodities Division, the provider will utilize industrial plating tanks and curing equipment to replace obsolete DAC coatings. A primary focus of the work is ensuring that all coating thickness and adhesion meet strict quality requirements for these critical fasteners. The project is designated as a Total Small Business Set-Aside under NAICS code 332813, with performance taking place in Texarkana, Texas. Interested parties must respond by October 20, 2026, to meet the requirements of this specialized coating application effort.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Aerospace Component Finishing and Coating (Green)This subcontract for Aerospace Component Finishing and Coating involves providing specialized surface treatment and green coloring for hydraulic housings supporting DLA Weapons Support ASC projects. The scope of work includes surface preparation and the application of aerospace-grade green pigments utilizing industrial coating booths and curing ovens. All finished components must be verified for thickness and durability in strict accordance with the DLA Master List of Technical and Quality Requirements before final delivery. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place in Tracy, California. Classified under NAICS code 332813, the contract requires the delivery of coated housings that are fully prepared for final inspection. The solicitation was posted on October 12, 2026, with a response deadline of October 20, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Specialized Finishing and Coating for Pitch ShaftsThis subcontract, titled Specialized Finishing and Coating for Pitch Shafts, involves providing specialized surface treatments, plating, and coatings for aircraft shafts to ensure optimal wear and corrosion resistance. The work is performed for prime contractors on projects for the Department of Defense DLA Weapons Support ASC Supplier Order OEM Division. All surface preparation and finishing must strictly adhere to Moog Military Aircraft LLC specifications, and the final delivery of shafts must include certified surface treatment reports. The project requires strict compliance with 29 CFR 1910.1200(g) regarding the labeling of hazardous materials. Performance of the contract will take place in Tracy, California. Interested parties should note the response deadline of October 20, 2026, for this opportunity categorized under NAICS code 332813.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Cadmium Plating for Aerospace HardwareThis subcontract involves providing specialized cadmium plating services for the DLA Weapons Support Fluid Handling Division at Tinker AFB. The scope of work focuses on applying cadmium plating to CRES 15-5PH threaded tube fitting plugs to ensure compliance with aerospace corrosion resistance and SAE standards. The selected provider must maintain approved source status and demonstrate the capability to meet strict QPL/QML quality requirements while delivering components that adhere to specified finish and thickness parameters. Environmental compliance is a critical component of the agreement, as the use of Class 1 ozone-depleting chemicals is strictly prohibited. Interested parties must respond by October 23, 2026, under NAICS code 332813. The project supports prime contractors in delivering high-standard aerospace hardware for the Department of Defense.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing involves providing specialized plating, coatings, and surface treatments for aircraft component projects under the DLA Weapons Support ASC. The contractor is responsible for applying aerospace-grade finishes to control stick components using industrial plating and anodizing equipment, ensuring all work adheres to Bell Textron technical data packages and the DLA Master List of Technical and Quality Requirements. The project is managed by the Department of Defense through the DLA Weapons Support ASC Supplier OEM Division, with performance located in Tracy, California. Interested parties must note the response deadline of October 20, 2026, for this effort categorized under NAICS code 332813.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing involves providing specialized plating, coatings, and surface treatments for hinge components supporting DLA Weapons Support ASC projects. The selected contractor must apply finishes strictly according to the Technical Data Package for Drawing 26512 123WM10100 and provide a certification of compliance for every finish applied. The project is managed under the Department of Defense and requires strict adherence to ITAR and EAR compliance, as well as JCP certification to access necessary technical data. Performance will take place in Tracy, California, with a response deadline set for October 20, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing specialized military-grade packaging, marking, and palletization for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires strict adherence to military standards, specifically MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-STD-130 for IUID implementation. All preservation, wrap, and cushioning materials must be utilized in accordance with RP001 specifications. The primary deliverable consists of eight Radar Display Units that must be fully packaged and palletized for shipment to DLA Dist San Joaquin. This project falls under NAICS code 488510 and is managed under the Department of Defense. The solicitation was posted on October 13, 2026, with a response deadline of October 20, 2026.

Freight Transportation Arrangement

POSTED

about 17 hours ago

DEADLINE

Radar Display Unit Supplier (NSN 5840014791519)This subcontract involves the supply of eight Radar Display Units for prime contractors supporting DLA Weapons Support ASC projects. The selected supplier is responsible for manufacturing or procuring units that strictly adhere to NSN 5840014791519 specifications, including mandatory physical identification and bare item marking in accordance with RQ017. To qualify, the provider must maintain an SAE AS9003 or ISO 9001 quality system and provide a CMMC Level 2 Self-Assessment. Additionally, the contract mandates full compliance with the Buy American Act and the Berry Amendment. The opportunity was posted on October 13, 2026, with a response deadline of October 20, 2026.

Semiconductor and Related Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

Hazardous/Non-Hazardous Aerospace Component PackagingThis subcontract involves providing specialized packaging and labeling services for aircraft struts on behalf of prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires the handling of both non-hazardous materials, following ASTM D3951 standards, and hazardous materials, adhering to TQ requirement IP025 and FED-STD-313. All items must be marked and labeled according to MIL-STD-129 using military-grade materials to ensure they are ready for FOB Origin shipment. The opportunity is categorized under NAICS code 488410 and was posted on October 13, 2026, with a response deadline of October 20, 2026. This project is managed under the Department of Defense, specifically through the DLA Weapons Support ASC, focusing on the secure preparation of aerospace components for transport.

Motor Vehicle Towing

POSTED

about 17 hours ago

DEADLINE

Aircraft Strut Fabrication and Supply (NSN 1560016027772)This subcontract involves the fabrication and supply of 77 finished aircraft struts for prime contractors supporting DLA Weapons Support ASC projects. The manufacturer must produce the struts according to approved source 78286 70305-02105-045 using traditional manufacturing methods, as additive manufacturing is strictly prohibited. All units are to be delivered to DLA Distribution centers. To qualify, the contractor must possess ISO 9001:2015 certification and a CMMC Level 2 self-assessment, ensuring high standards of precision machining and cybersecurity. Additionally, the contract mandates full compliance with the Buy American Act and the Berry Amendment. This requirement falls under NAICS code 336413 for the Department of Defense.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

61--CABLE ASSEMBLY,POWER,E

Solicitation # SPE4A6-27-T-3254

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 17 hours ago

DEADLINE

15--STRUT,AIRCRAFT

Solicitation # SPE4A6-27-T-3210

Solicitation SPE4A6-27-T-3210 is a fixed-price request for quotation issued by the DLA Weapons Support ASC Commodities Division for the procurement of aircraft struts under NSN 1560016027772. The requirement is divided into four line items with total quantities of 84 units, to be delivered to DLA Distribution centers in Cherry Point, San Diego, and Jacksonville. The approved source is identified as 78286 70305-02105-045. All quotes must be submitted electronically via the DLA Internet Bid Board System (DIBBS) by October 20, 2026. Delivery is generally required within 340 days after receipt of order, though the government may grant evaluation preference to offerors proposing shorter lead times. The contract mandates strict adherence to quality and packaging standards, requiring manufacturer inspection systems to comply with ISO 9001:2015. Packaging must follow ASTM D3951 for non-hazardous materials and TQ requirement IP025 for hazardous materials, with all shipments labeled per MIL-STD-129. Key regulatory requirements include CMMC Level 2 Self-Assessment, compliance with the Buy American Act and Berry Amendment, and the use of the Wide Area WorkFlow (WAWF) system for invoicing. Notably, the government will not evaluate any offers containing parts produced via additive manufacturing. Inspection and acceptance will occur at the destination.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

58--DISPLAY UNIT,RADAR

Solicitation # SPE4A6-27-T-3389

Solicitation SPE4A6-27-T-3389 is a request for quote issued by the DLA Weapons Support ASC Commodities Division for the procurement of eight radar display units, identified by NSN 5840014791519. The requirement falls under NAICS code 334511. Quotes must be submitted electronically via the DIBBS portal by October 20, 2026. Approved sources for this procurement include 03956 91005220, 03956 91005220-2, and 03956 T91005220. Delivery is required to DLA Dist San Joaquin in Tracy, California, with a need ship date of April 6, 2027, and an original required delivery date of June 24, 2027. While the solicitation is listed as FOB Destination Other, offers should be submitted based on FOB Origin under the First Destination Transportation program. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 for shipment and storage, MIL-STD-130 for Item Unique Identification, and RP001 for palletization. Quality assurance requires the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001, with acceptance based on zero non-conformances in sample lots. Payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system. Key regulatory compliance includes the Buy American Act, Berry Amendment, and CMMC Level 2 Self-Assessment. Additionally, the contract prohibits the use of mercury compounds in packaging and the acquisition of covered defense telecommunications equipment.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

66--PROBE,EDDY CURRENT

Solicitation # SPE4A6-27-T-3331

Other Measuring and Controlling Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

66--CAMERA,INFRARED,INDUST

Solicitation # SPE4A6-27-T-3258

Other Measuring and Controlling Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

16--PAD,CUSHIONING

Solicitation # SPE4A6-27-T-3366

Aircraft Manufacturing

POSTED

about 17 hours ago

DEADLINE

66--TRANSDUCER,MOTIONAL PI

Solicitation # SPE4A6-27-T-3525

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 17 hours ago

DEADLINE

61--WIRING HARNESS,BRANCHE

Solicitation # SPE4A6-27-T-3495

Other Electronic Component Manufacturing

POSTED

about 17 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS