Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aerospace Surface Treatment and Finishing

Active

Federal

Response Deadline11/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity is for the provision of specialized aerospace surface treatments, plating, and coating services for Droop Actuator Caps under NSN 1680-00-318-8449. Working for prime contractors on behalf of the Department of Defense DLA Weapons Support ASC, the selected provider will apply aerospace-grade coatings and chemical processing in strict accordance with technical drawings. The work is to be performed in San Diego, California. Eligible bidders must hold ISO 9001 or an equivalent aerospace finishing certification and maintain US/Canada Joint Certification Program certification to comply with ITAR and EAR regulations. This is a Total Small Business Set-Aside under NAICS code 332813. Responses are due by November 10, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

SAN DIEGO, CA, 92136-3581, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE4A7-27-T-2586.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CAP, DROOP ACTUATOR

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 2

subcontract

Response DeadlineNov 10

Submission deadline

Response Deadline

11/10/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized surface treatments, plating, or coating for prime contractors on DLA Weapons Support ASC projects. Applies aerospace-grade coatings and chemical processing to Droop Actuator Caps per NSN 1680-00-318-8449 technical drawings. Requires ISO 9001 or equivalent aerospace finishing certification and US/Canada Joint Certification Program certification for ITAR/EAR. Delivers finished, coated components.

Similar Contracts

Same NAICS industry code

Aerospace Component Finishing and Quality ValidationThis subcontract for Aerospace Component Finishing and Quality Validation supports the Department of Defense through the DLA Weapons Support ASC Commodities Division. The scope of work involves performing specialized surface treatments and quality validation for prime contractors, specifically applying aerospace-grade coatings and conducting critical evaluations such as non-destructive testing, hardness testing, and thread gauging. All work must strictly adhere to the DLA Master List of Technical and Quality Requirements, and finished components must be delivered with certified test reports. The project is located in Tracy, California, and falls under NAICS code 332813. Due to the nature of the aerospace components involved, the contractor must maintain full ITAR and EAR compliance. Interested parties should note the response deadline of November 10, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Precision Coating and Surface FinishingThe Precision Coating and Surface Finishing subcontract involves providing specialized surface treatments and industrial coatings for gear shafts on projects for the DLA Weapons Support Fluid Handling Division. The contractor is responsible for applying coatings that meet strict corrosion and wear specifications, while performing thickness testing and adhesion verification in accordance with RA001 quality requirements to ensure all finished shafts are ready for final inspection. This Department of Defense effort is categorized under NAICS code 332813 and will be performed at Robins Air Force Base. Interested parties should note the response deadline of November 13, 2026, for this specific procurement opportunity.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

Aerospace Surface Treatment and CoatingThis subcontract for Aerospace Surface Treatment and Coating supports the Department of Defense through the DLA Weapons Support ASC. The selected provider will perform surface treatments and coatings for aircraft panels, ensuring all finishes align with reference drawings. Key responsibilities include executing physical identification and bare item marking in strict accordance with MIL-STD-129 and RQ017 standards. The project is a total small business set-aside under NAICS code 332813, with performance taking place at Robins Air Force Base. Due to the nature of the components, the contractor must possess the capability to handle ITAR-controlled materials and maintain rigorous aerospace quality standards. Responses for this opportunity are due by November 10, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing supports the DLA Weapons Support Fluid Handling Division within the Department of Defense. The selected provider will perform specialized surface treatments, plating, or passivation on machined coupling halves, ensuring all protective coatings adhere to TDP Rev B Gen 2 and OEM reference drawings. The final deliverable consists of finished, coated components processed in New Cumberland. To qualify for this engagement, contractors must maintain ISO 9001 or AS9100 certification and ensure full ITAR and EAR compliance for the handling of controlled hardware. Interested parties must submit their responses by November 13, 2026, under NAICS code 332813.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

Specialized Aviation Finishing and NDT TestingThis subcontract for Specialized Aviation Finishing and NDT Testing supports DLA Weapons Support aviation supply contracts through the provision of surface treatments, coatings, and non-destructive testing. The contractor is responsible for applying finishes and performing inspections according to Drawing 77445 822837 to ensure the integrity of Critical Safety Items. All finished assemblies must be delivered alongside comprehensive test reports. The work will be performed at Tinker AFB and requires strict adherence to industry and federal standards, including NADCAP accreditation and compliance with DFARS 252.223-7001 regarding hazardous materials. This opportunity falls under NAICS code 332813 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

POSTED

about 5 hours ago

DEADLINE

Specialized Aerospace Surface Treatment and FinishingThis subcontract opportunity, titled Specialized Aerospace Surface Treatment and Finishing, involves providing surface treatments and coatings for prime contractors supporting DLA Weapons Support ASC projects. The selected provider will utilize industrial plating and anodizing systems to apply finishes in strict accordance with Boeing Process Specifications BAC5300, BAC5307, BAC5446, and BAC5602. To ensure quality and security standards, the contractor must maintain ISO 9001:2015 certification and full ITAR compliance. Managed by the Department of Defense under NAICS code 332813, this requirement is designated as a Total Small Business Set-Aside. The contract was posted on November 2, 2026, with a response deadline of November 16, 2026. The primary objective is the delivery of finished aerospace components that meet all specified BAC surface treatment requirements.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

Aerospace Specialized Finishing & CoatingThe Aerospace Specialized Finishing and Coating subcontract involves providing surface treatment and finishing services for prime contractors supporting DLA Weapons Support ASC aircraft components. The scope of work requires the application of aerospace-grade coatings and anodizing that strictly adhere to Boeing technical specifications and NADCAP-accredited processes. A critical compliance requirement is the prohibition of hexavalent chromium in accordance with DFARS 252.223-7008. Managed by the Department of Defense under NAICS code 332813, the contract ensures that all finished components are delivered with certified surface treatments. The performance of these services is centered in the 73145-8000 zip code area. Interested parties must note the response deadline of November 13, 2026, for this specialized defense procurement effort.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

Cadmium Plating SpecialistThis subcontract for the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division, requires a Cadmium Plating Specialist to provide surface preparation and plating services for 482 steel tube elbows. The work must be performed at Hill AFB and adhere strictly to MIL-DTL-18866K standards to ensure proper corrosion resistance. The contractor is responsible for utilizing industrial plating tanks and managing hazardous waste systems while complying with all prohibitions regarding Class I ozone-depleting chemicals. The project is categorized under NAICS code 332813, with a response deadline set for November 13, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

Aerospace Finishing and Plating for Interface AdapterThis subcontract involves providing specialized surface treatments and aerospace-standard plating for Interface Device Adapter components supporting DLA Weapons Support ASC projects. The contractor is responsible for applying finishes according to specific technical drawings and ensuring full compliance with the DLA Master List of Technical and Quality Requirements. Performance of these services will take place in Grand Prairie, Texas. The scope of work includes the management of hazardous materials and the provision of Safety Data Sheets in accordance with Federal Standard No. 313. The final deliverable consists of finished and coated components delivered to the prime contractor. This requirement is managed under NAICS code 332813 for the Department of Defense.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

Aerospace Component Finishing and Marking ServicesThis subcontract for Aerospace Component Finishing and Marking Services involves providing surface treatments and physical identification marking for prime contractors supporting DLA Aviation supply contracts. The scope of work specifically requires the application of aerospace-grade coatings and the execution of bare item marking according to requirement RQ017 for NSN 2840-00-784-4694, resulting in finished housings ready for final inspection. Managed under the Department of Defense through the DLA Weapons Support SMSG Aviation Supply Chain, the project is categorized under NAICS code 332813 and will be performed at Tinker AFB. Due to the nature of the components, the contractor must be capable of handling ITAR and EAR controlled materials. The response deadline for this opportunity is November 9, 2026.

DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

POSTED

about 5 hours ago

DEADLINE

Surface Treatment and FinishingThis subcontract, titled Surface Treatment and Finishing, is issued by the Department of Defense under the DLA Weapons Support Strategic Acquisition Program Directorate. The scope of work involves providing specialized protective coating and plating services for steering gear arms to support prime contractors fulfilling DLA supply contracts. Required processes include zinc plating, powder coating, and phosphating, all of which must adhere to the DLA Master List of Technical and Quality Requirements. The contractor will utilize industrial plating tanks and powder coating booths to handle surface preparation, cleaning, and final finishing. This opportunity falls under NAICS code 332813. The solicitation was posted on November 2, 2026, with a response deadline set for November 17, 2026.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 5 hours ago

DEADLINE

Valve Component Surface Treatment and FinishingThis subcontract for Valve Component Surface Treatment and Finishing supports Navsup Weapon Systems Support projects by providing specialized cleaning, finishing, and coating services for valve components. The selected contractor will be responsible for applying finishes to both new and repaired components in strict accordance with the provided Technical Data Package. To ensure quality and compliance, the contractor must possess industrial coating equipment and maintain either ISO 9001 or SAE AS9100 certification. Deliverables include the finished components accompanied by detailed inspection reports that document the specific processes used and the final finish results based on established pass or fail criteria. This opportunity falls under NAICS code 332813 and is managed under the Department of Defense.

Navsup Weapon Systems Support

POSTED

about 10 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Supply of Turnlock Fastener ReceptaclesThis subcontract involves the supply of two Turnlock Fastener Receptacles, specifically part BACS22A32, manufactured or sourced according to Basic Drawing NR 81205 BACS22A Revision W. The contract supports prime contractors delivering to the Department of Defense via the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place in San Diego. The provider must adhere to strict technical and regulatory standards, including MIL-STD-129 for marking, RP001 and MIL-STD-2073-1E for packaging, and MIL-STD-1916 or ASQ H1331 for sampling plans. Additionally, the contract mandates full compliance with the Buy American Act and NIST SP 800-171 cybersecurity standards.

Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

Manufacturing of Aileron Counter Balance ShieldsThis subcontract involves the manufacture and supply of four certified precision-machined aileron counter balance shields for prime contractors supporting DLA Weapons Support supply contracts. The components must be fabricated using aerospace-grade alloys and precision CNC machining in strict accordance with reference drawings 98897 STP51-302 (Rev AJ) and 98897 4J53005/1 (Rev K). All production must adhere to the DLA Master List of Technical and Quality Requirements (RA001). The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Robins Air Force Base. The contract falls under NAICS code 336413, with a response deadline set for November 10, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

Aerospace Component Packaging and Marking ServicesThe Aerospace Component Packaging and Marking Services subcontract involves providing specialized packaging and marking for prime contractors supporting DLA supply contracts. The scope of work includes packaging components according to RP001 standards, performing bare item marking per RQ017, and applying hazard warning labels in compliance with DFARS 252.223-7001. To ensure government shipment readiness, the contractor will utilize industrial etching equipment and military-grade packaging materials to process nozzles. This project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Tinker AFB. The opportunity was posted on November 2, 2026, with a response deadline of November 10, 2026. It is categorized under NAICS code 493110.

General Warehousing and Storage

POSTED

about 5 hours ago

DEADLINE

Lubricating Nozzle ManufacturerThis subcontract involves the manufacture of lubricating nozzles for prime contractors supporting DLA Aviation projects, specifically for NSN 2840-01-256-2029. The selected manufacturer is responsible for fabricating nozzles to strict military specifications, executing First Article Tests as outlined in CLIN 0002, and performing bare item marking according to RQ017. Due to the nature of the components, the contractor must utilize precision machining equipment and maintain full CSI compliance for Critical Safety Items. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Div, with performance taking place at Tinker AFB. The final deliverables include the finished lubricating nozzles and the required FAT certification. Interested parties must adhere to the response deadline of November 10, 2026, as specified in the solicitation.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 5 hours ago

DEADLINE

Quality Assurance and Certification for Critical Safety ItemsThis subcontract, titled Quality Assurance and Certification for Critical Safety Items, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The project involves providing independent verification and certification services for prime contractors, specifically focusing on the verification of Critical Safety Item tolerances using NIST-calibrated metrology equipment. The selected provider must execute sampling plans according to MIL-STD-1916 or ASQ H1331, prepare Source Approval Request documentation, and maintain strict SAE AS9100 compliance to deliver certified Inspection Reports and Certificates of Conformance. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, with the place of performance located in New Cumberland. Interested parties must submit their responses by November 10, 2026.

Testing Laboratories and Services

POSTED

about 5 hours ago

DEADLINE

Precision Fabrication of Accumulator AssembliesThis subcontract, titled Precision Fabrication of Accumulator Assemblies, is a total small business set-aside issued by the Department of Defense for the DLA Weapons Support ASC. The project requires the precision machining of three Accumulator Assemblies, specifically part number 47614, in accordance with provided technical drawings. The scope of work excludes additive manufacturing and mandates strict adherence to MIL-STD-1916 or ASQ H1331 for sampling, RQ017 for bare item marking, and MIL-STD-2073-1E for packaging and delivery. To be eligible, contractors must hold SAE AS9100 certification and maintain CMMC Level 2 compliance. The work is to be performed in New Cumberland, Pennsylvania. Interested parties must respond by November 10, 2026, to fulfill the requirements of this specialized fabrication effort under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supplier of Nonmetallic Flexible Conduit (NSN 5975-01-436-8705)This subcontract involves the supply of 100 feet of nonmetallic flexible conduit to support prime contractors delivering DLA supply contracts. The materials must strictly adhere to NSN 5975-01-436-8705 specifications and comply with MIL-STD-129 standards for shipment and storage marking. The contract is issued by the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div under NAICS code 423610. Performance will take place in Cherry Point, North Carolina, with a response deadline set for November 10, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

Aerospace Grade Alloy/Composite SupplyThis subcontract, titled Aerospace Grade Alloy/Composite Supply, is a total small business set-aside issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The contract involves the procurement of raw aerospace materials for prime contractors, specifically requiring compliance with specification 81205 BMS5-28AN and TDP Rev D Gen 4 standards. Performance will take place at Robins Air Force Base, with the supplier responsible for delivering certified raw materials directly to the fabricator. To ensure strict quality control and traceability, the supplier must provide full material certifications and Mill Test Reports. Additionally, because the project involves sensitive defense technology, the contractor is required to have the necessary approvals to handle ITAR and EAR controlled materials. The solicitation was posted on November 2, 2026, with a response deadline of November 10, 2026, falling under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

Precision Aircraft Panel ManufacturingThe Precision Aircraft Panel Manufacturing subcontract involves the fabrication of structural aircraft panels for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires subtractive or formative manufacturing in strict accordance with Basic Drawing 98897 4F75009 and Reference Drawings 98897 STM22-506 and 98897 DS30000. The selected provider is responsible for delivering finished panels and completing First Article Testing for units delivered to Robins Air Force Base. This opportunity is a total small business set-aside under NAICS code 336413. To be eligible, contractors must maintain CMMC Level 2 and US/Canada JCP certifications, as well as compliance with SAE AS9003 or ISO 9001 standards. The project is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Robins AFB.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Blank Panels (NSN 5975015347492)This subcontract involves the manufacture or sourcing of three blank panels meeting NSN 5975015347492 specifications for prime contractors supporting the Department of Defense DLA Weapons Support ASC. The project requires strict adherence to quality control standards under SAE AS9003 or ISO 9001, with packaging and labeling conducted according to ASTM D3951 and MIL-STD-129 respectively. The performance of this contract takes place in New Cumberland, Pennsylvania, under NAICS code 335999. To be eligible, the provider must maintain cybersecurity compliance in accordance with NIST SP 800-171. The response deadline for this requirement is November 10, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supplier of Bushing, Sleeve (NSN 5365016750659)This subcontract involves the manufacture or procurement of 27 sleeve bushings identified by NSN 5365016750659 to support prime contractors delivering on Department of Defense contracts. Managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div, the agreement requires the supplier to package and ship the items under FOB Origin terms, with a final delivery deadline of June 20, 2027. The supplier must be registered with the DLA Account Management and Provisioning System to ensure compliance. Performance for this contract is centered in Barstow, California, under NAICS code 332721.

Precision Turned Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Aerospace Surface Treatment and Pressure Testing

POSTED

DEADLINE

Plating and Surface Treatment for Terminal Lugs

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aerospace Surface Treatment and Finishing

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Cadmium Plating for Critical Fasteners

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Aerospace Finishing and Coating Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

CARC and High-Temperature Coating Services

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Aerospace Finishing and Coating for Rotor Components

DLA WEAPONS SUPPORT CCAD DETACHMENT

POSTED

DEADLINE

Aerospace Grade Finishing and Coating

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS