This Pre-Solicitation opportunity from Department Of Defense was posted on April 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

AFPSL Load Cell Exchange

Closed

26M-630ABCDEFG-FOFederal

Submission Closed04/30/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334516

New

Federal

Oil Analysis Autosampler Supplier

POSTED

DEADLINE

Inductively Coupled Plasma-Optical Emission Spectrometer (ICP-OES) Supplier

POSTED

DEADLINE

Off-Axis Parabolic Mirrors

Solicitation # FA860127Q0003

The Air Force Life Cycle Management Center, on behalf of the Air Force Institute of Technology, is conducting market research via a Sources Sought notice to identify qualified sources for the manufacture and delivery of 66 customized off-axis parabolic mirrors and associated protected-gold coating services. These precision optical components are intended for use in the Extreme Light Laboratory to support ultra-intense laser experiments. The mirrors must feature a 30mm diameter fused-silica substrate with a parabolic focus at 45 degrees, a surface roughness of less than 1nm RMS, and a scratch/dig specification of 20-10. The required protected-gold coating must provide an average reflectivity of at least 97 percent at a wavelength of 780 plus or minus 40nm with a 45-degree angle of incidence. The selected contractor will be responsible for all labor, materials, quality assurance, and transportation to Wright-Patterson Air Force Base, Ohio. Key deliverables include the mirrors and comprehensive test data, including certificates of conformance and surface-measurement data. Delivery is required within 98 calendar days after receipt of order, and the equipment must be warranted against defects for two years following receipt. Payment terms are set at 100 percent after delivery, net 30 days from the invoice date. Interested parties under NAICS code 334516 must submit a capability package by October 23, 2026.

POSTED

DEADLINE

Flight Model Solar Array Wings

Solicitation # 80NSSC27946791Q

NASA/NSSC is seeking capability statements for the procurement of flight-qualified solar array wings for the TERP RAPTOR 12U CubeSat mission to asteroid Apophis. The requirement includes the acquisition and delivery of one flight model consisting of two solar array wings, each featuring 20 solar cells, hinges, spacers, and a thermal knife deployment system. The scope of work encompasses a comprehensive test campaign involving vibrations, TVAC, and bake-out tests, as well as the delivery of interface documentation, software, and calibration data. The contractor must also provide technical support during solar panel acceptance, spacecraft integration, and initial functional verification at the NASA Goddard Space Flight Center in Greenbelt, Maryland. This procurement is being conducted under FAR Part 12 for commercial items, with a planned period of performance for unit testing and integration from July 1, 2027, through October 31, 2027. While NASA/NSSC intends to issue a sole source contract to DHV Technology under FAR 12.102(a), they are currently requesting capability statements to determine if the procurement should be conducted on a competitive basis. Interested parties must submit their qualifications in writing to the designated point of contact by October 28, 2026. Please note that quotes will not be evaluated at this stage, and all correspondence must reference the notice ID 80NSSC27946791Q.

National Aeronautics And Space Administration

POSTED

DEADLINE

ICP-OES for Oil Analysis

Solicitation # W911S227U0057

Solicitation W911S227U0057 is a Request for Quotation for the procurement of new equipment for the material analysis lab at Yuma Test Center, specifically an Inductively Coupled Plasma-Optical Emission Spectrometer (ICP-OES) and a compatible autosampler. The ICP-OES must feature a radial torch with radial view, oxygen burn capability, chiller-free operation, and the ability to integrate a Catech ASXpress system and export data via .csv for LIMS entry. The autosampler must include a mixing or stirring head, a sample induction head, and a capacity for up to 384 samples across four 96-position test tube racks, with dimensions not exceeding 20 by 24 by 24 inches. Both items must be designed to meet ASTM D-5185 and Caterpillar SOS program performance standards. This acquisition is a Total Small Business Set-Aside under NAICS code 334516, managed by the W6QM Micc-Ft Drum. Award will be granted to the responsible offeror whose proposal is most advantageous to the government, based on an evaluation of price and technical factors. Only new equipment will be accepted; used or remanufactured products are prohibited. Offers of equal products must provide brand names, model numbers, and descriptive literature to prove compliance with salient characteristics. Delivery is required F.O.B. destination, with a preferred timeframe of 30 days. Quotes must be submitted through the PIEE Solicitation module by November 14, 2026.

POSTED

DEADLINE

High Throughput Simultaneous Dynamic Vapor Sorption (DVS) System Supply

National Research Council of Canada

POSTED

DEADLINE

Laboratory Equipment, Microscope & Accessories (Supply and Install) (Echo Revolve)

Solicitation # 40-27

Solicitation 40-27, issued by the New Hampshire Department of Administrative Services, seeks bids for the supply, delivery, and turn-key installation of an Echo Revolve R4 Upright Microscope and associated accessories for the NH Department of Fish and Game in Concord, New Hampshire. The required equipment is a hybrid fluorescence microscope capable of flipping between upright and inverted modes, featuring a 12.9-inch iPad Pro Retina display. Key deliverables include the microscope system, specific LED light cubes, various objective lenses, an ELWD universal condenser, stage inserts, and a digital haze reduction software module. The successful vendor must complete delivery and installation within 45 business days of the contract award. The contract will be awarded to the responsible vendor who submits a conforming bid meeting all technical specifications at the lowest total cost. Bids are due by October 23, 2026, and must be submitted via email to the Bureau of Purchase and Property. Vendors are required to provide proof of comprehensive general liability insurance of at least 1 million dollars per occurrence and 2 million dollars aggregate, as well as workers compensation insurance. Environmental guidelines encourage the elimination of PVC and polystyrene and the use of SmartWay transport partners. Payment terms are set at 30 days following the receipt of an itemized invoice after the equipment has been delivered, inspected, and accepted by the agency.

Das Purchasing (statewide Bids & Contracts)

POSTED

DEADLINE

MFO Teledyne Items G. Curvin 10/19/26

Solicitation # SRC0000037208

Solicitation SRC0000037208 is issued by the Alabama Environmental Management agency for the procurement of a Teledyne API Model N100 SO2 Analyzer. The device must utilize the UV fluorescence principle and adhere to the US EPA Automated Equivalent Method EQSA-0495-100, featuring a lower detectable limit of 0.4 ppb or less and a response time of less than 120 seconds to 95%. Required accessories include a long-life sample filter holder assembly and two rack mount kits. The contract is capped at a total value of 25,000 dollars and may be renewed annually for up to five years. The State of Alabama will evaluate bids based on price reasonableness, cost realism, and supplier qualifications, which may include requests for professional licenses, insurance certificates, and manufacturer reseller authorizations. Suppliers must be registered in Alabama Buys and submit responses electronically. Key compliance requirements include E-Verify enrollment for Alabama-based employees, certification of no boycott activities, and adherence to Alabama state and local tax regulations. Payment is handled electronically via P-cards, EFT, or state-issued credit cards, with price escalations limited to 5 percent of the annual contract cost. The State retains the right to inspect all products after delivery before final acceptance.

ENVIRONMENTAL MANAGEMENT

POSTED

DEADLINE

Supply of Special Scale Meters (NSN 6625-01-541-0598)This subcontract involves the procurement of two Special Scale Meters under NSN 6625-01-541-0598 to support prime contractors for the DLA Weapons Support Maritime Supply Chain. The selected provider is responsible for sourcing or manufacturing the meters and ensuring all units adhere to strict military specifications. This includes marking according to MIL-STD-129 and packaging in compliance with RP001 and MIL-STD-2073-1E. Additionally, the contractor must provide hazard warning labels as required by 29 CFR 1910.1200 and DFARS 252.223-7001 where applicable. The contract falls under NAICS code 334516 and requires delivery of the units FOB Origin to DLA Distribution DDSP in New Cumberland. Interested parties must submit their responses by October 30, 2026. This effort is managed through the Department of Defense to ensure the continued operational readiness of maritime supply chain weapons support.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Dräger Carbon Dioxide Measuring TubesThis subcontract involves the manufacture and supply of specialized round glass measuring tubes with melted tips for prime contractors supporting Department of Defense DLA supply contracts. The tubes must be produced according to Dräger Carbon Dioxide 100/A-P specifications, featuring a measuring range of 100 to 3000 ppm for 1 liter of air. The final delivery consists of two packages of gas analyzer measuring tubes. Compliance is required with ASTM D3951 packaging and Medical Marking Standard No. 1. The contractor must ensure that all items are delivered within three months of manufacture. This requirement is managed under NAICS code 334516 for the Medical Supply Chain FSH agency, with the place of performance located at FPO 96692-1100.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Gas Analyzer Supplier (NSN 6630016713921)This subcontract involves the supply of two specialized gas analyzer units for prime contractors supporting Department of Defense medical equipment procurements through the Medical Supply Chain FSH. The equipment must adhere to NSN 6630016713921 specifications, featuring an internal pump, a digital LCD display, and a selectable carrier gas option for either oxygen or air. These units are specifically required to measure vaporizer output concentrations for Halothane, Isoflurane, Sevoflurane, and Desflurane. The procurement falls under NAICS code 334516 and is managed by the Department of Defense. The place of performance is designated as APO 96260-5479. Interested parties must note the response deadline of October 26, 2026, following the posting date of October 19, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

MEASURING TUBE, GAS ANA

Solicitation # SPE2DH-27-T-0214

Solicitation SPE2DH-27-T-0214 is a procurement by the Defense Logistics Agency for the supply of gas analyzer measuring tubes, specifically the Draeger Carbon Dioxide 100/A-P. These round glass tubes with melted tips are designed to measure carbon dioxide content in compressed gases with a range of 100 to 3000 parts per million per liter of air. The requirement consists of three line items, each for one package containing 10 tubes. Delivery is required within 20 days after the order, with shipments destined for the USS Carl M. Levin, USS William P Lawrence, and USS Thomas Hudner. The contract mandates a non-extendable shelf life of 24 months, with a requirement that no more than 3 months elapse between the date of manufacture and delivery to the government. Packaging must adhere to ASTM D3951 and DLA packaging requirements, while marking must comply with Medical Marking Standard No. 1. Invoicing and payment are processed electronically through the Wide Area WorkFlow system. The procurement is governed by NAICS code 334516 and includes various FAR and DFARS clauses regarding equal opportunity, combatting trafficking in persons, and the Buy American Act. Destination inspection is required per FAR 52.246-2.

MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days

General Info

Agency

Department Of Defense → FA2263 Aflcmc Romk Afmetcal

NAICS

334516 - Analytical Laboratory Instrument Manufacturing

Place of Performance

OH, 43056, USA

Set-Aside

NONE

Documents

PD Rev1 26M-630A-FO AFPSL Load Cells Exchange Purchase Description

purchase-description

High

JA_Rev0_26M-630A-FO+AFPSL+Load+Cell+Exchange.pdf

AI Contract Breakdown

Uniform Contract Format

Timeline

1 update

PhaseClosed

PostedApr 15

Presolicitation

Notice updatedApr 16

Notice details unchanged. Attachments may have changed.

Response DeadlineApr 30

Deadline has passed

Submission Closed

04/30/2026, 06:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FA2263 Aflcmc Romk Afmetcal

Contacts1 person available

OfficeHEATH, OH, 43056-6116, USA

Organization / AgencyDepartment Of Defense → FA2263 Aflcmc Romk Afmetcal

Office AddressHEATH, OH, 43056-6116, USA

Contacts

Christine Patterson

contact@example.gov

Full Description

AFMETCAL at Heath OH intends to solicit and award a Sole Source Firm Fixed Price (FFP) contract under Simplified Acquisition Procedures (SAP) in accordance with Revolutionary FAR Overhaul (RFO) Part 12 Acquisition of Commercial Products and Commercial Services and RFO 12.201-1 Simplified Procedures for the purchase of various load cells and indicators for the AFPSL Load Cell Exchange to Tovey Engineering, Inc. (Tovey) (Cage 1TY59). Tovey is the manufacturer of the original calibration system. Operating the calibration system involves proprietary technology and software which the manufacturer is unwilling to release to another company. For this requirement, there is no other action that can be accomplished to generate competition without a substantial duplication of costs. This procurement will provide the best value to the Government at this time. The Government envisions a Firm Fixed Price type contract. The anticipated quantity is 175 units over a 5 year period. The requirement is for various load cells and indicators for the AFPSL Load Cell Exchange in accordance with the Purchase Description, which is available for download at this site. A copy of the approved J&A is also posted with this notification.

THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE PROPOSALS OR QUOTATIONS. No solicitation package will be issued. A determination by the Government not to compete this action based on responses received is solely within the discretion of the Government. All responsible sources may submit a capability statement, proposal, or quotation which shall be considered by AFMETCAL. Interested sources must respond in writing with clear and convincing evidence to support their ability to provide the required item within fifteen (15) days of this publication. Interested parties should submit questions to Christine Patterson at christine.patterson.1@us.af.mil. Only electronic submissions will be reviewed.