Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Hawaii was posted on April 30, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Air Purifiers for Long Term Care Facilities (LTCFs)

Closed
DOH-DOCD-2024-04State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334515
New
SLED
Electric Utility Metering Test Bench
Solicitation # 26-MMLD-009
The Marblehead Municipal Light Department (MMLD) is soliciting bids for the supply, installation, training, and support of a utility-grade electrical meter test bench system. This system is intended to support MMLD's distribution network and upcoming AMI system replacement, requiring the capability to test electromechanical, electronic solid-state, and Advanced Metering Infrastructure (AMI) meters across both single-phase and three-phase forms. Technical requirements include support for meter forms 2S, 4S, 9S, 12S, and 16S, and meter classes 10, 20, 100, 200, and 320, with a mandatory voltage and current measurement accuracy of ±0.02% or better. The successful contractor must provide a complete system including all accessories, pickups, adapters, connection hardware, operating manuals, calibration certificates, and software licenses. Deliverables include the physical equipment, commissioning services, and comprehensive training for MMLD personnel. Bids will be evaluated based on technical compliance, equipment functionality, software capabilities, warranty and support, training offerings, utility experience, and the total cost of ownership. Proposals must be submitted by December 18, 2026, and must include company background, references from at least three electric utilities, and a detailed delivery schedule. Preferred but non-mandatory features include the ability to test disconnect/reconnect relays and NIST traceability testing that does not require shipping the bench from MMLD facilities.
Marblehead Muncipal Light

POSTED

about 19 hours ago

DEADLINE

in about 1 month
NAICS: 334515
New
Federal
Radio Detection Kit with Accessories - No Alternatives
Solicitation # JL484787
Brookhaven Science Associates (BSA), acting for Brookhaven National Laboratory, is soliciting quotations for a Firm Fixed Price purchase order to acquire a Radiodetection 8200SG Locator Kit and associated accessories. The required equipment includes the 8200SG Receiver with RTK GPS, a TX-10B Transmitter with ILOC, rechargeable battery kits, a 5-inch transmitter signal clamp, and an A-Frame and bag. Additionally, the scope includes a one-year license for Pointment Plus Utility Mapping Software and on-site training for eight students for four hours at the laboratory in Upton, New York. The proposal due date is November 23, 2026, and awards will be based on the lowest total evaluated price from a responsive and responsible offeror. Quotations must include the country of origin, Unique Entity Identifier, and any available published price lists, with pricing remaining valid for at least sixty days. Shipping requirements specify that items under 150 lbs may ship via the laboratory's FedEx account, while other shipments must be all-inclusive of freight, tariffs, and handling fees to be delivered FOB Destination. All deliverables must adhere to strict quality assurance standards, including ASTM Standard D 3951 for packaging, NIST-traceable calibration for test equipment, and compliance with OSHA's Globally Harmonized System. Electrical equipment must be certified by a Nationally Recognized Testing Laboratory, as the CE mark is not accepted.
Brookhaven National Labor -Doe Contractor

POSTED

1 day ago

DEADLINE

in 6 days
NAICS: 334515
New
Federal
V22 Assembly Hardware
Solicitation # N6852027Q1003
Solicitation N6852027Q1003 is a competitive procurement issued by the Fleet Readiness Center East for the build-to-print assembly, testing, packaging, and delivery of load box assemblies supporting the V-22 OTPS 8 Upgrade. The requirement consists of 48 units each of three specific assemblies: WLB1 (P/N 18D90975-1), WLB2 (P/N 18D90976-1), and WLB3 (P/N 18D90977-1). These components are utilized within the Navy's Consolidated Automated Support System family of Automated Test Equipment to verify the functionality of MAO DSIU and FMU Units Under Test. The government intends to award this contract on a firm fixed-price basis to a small business, with the award determined by an equal weighting of price, technical capability, and past performance. The selected contractor will be responsible for assembly using government-furnished Technical Data Packages and materials, performing manual or automated wiring ring-out testing, and providing monthly status reports. All completed hardware must be delivered in sets of ten, packaged in tri-wall cardboard boxes according to industry standards, and shipped to Fleet Readiness Center East in Cherry Point, North Carolina, within 180 calendar days after contract award. Compliance with MIL-PRF-32070A and ISO 9000 quality standards is required. Invoicing and payments will be processed electronically via Wide Area WorkFlow. Offerors must be registered in the System for Award Management and submit their quotes by 12:00 PM EST on November 24, 2026.
Fleet Readiness Center

POSTED

1 day ago

DEADLINE

in 7 days
NAICS: 334515
New
Federal
FOPR for F-16 AAGs for the Common Aircraft Portable Reprogrammable Equipment (CAPRE) Secure Memory Loader Verifier (SMLV)
Solicitation # FA8533-26-R-0007
Solicitation FA8533-26-R-0007 is a Fair Opportunity Proposal Request for the development of F-16 Aircraft Adapter Groups (AAGs) to be integrated into the Government's Common Aircraft Portable Reprogrammable Equipment (CAPRE) Secure Memory Loader Verifier (SMLV). This effort, restricted to awardees of the ATSA Multiple Award Contract (MAC), requires the contractor to develop production-level software, hardware, and corresponding technical orders. A primary deliverable is the production of 1,800 cables in total, consisting of 300 cables each for six specific Line Replaceable Units: ALQ-131, Anti-Skid, CPDG/eCPDG, CSFDR, EEFCC, and FCSDR. The contractor is responsible for obtaining necessary data and artifacts from Original Equipment Manufacturers to ensure successful development. The government will award the task order based on a Technical, Past Performance, and Price Trade-Off, where non-price factors are deemed more important than price. Technical merit is the primary objective, with past performance serving as the primary discriminator and price as the final deciding factor. Proposals must be submitted via DoDSAFE by January 19, 2027, and must include three separate volumes: Technical Capability, Past Performance, and Cost/Price. Evaluation of the technical volume includes a pass/fail assessment of the offeror's commitment to intellectual property and data rights requirements. While the cables themselves are not classified, the government notes that certain testing events or lab access may require security clearances or SAP access.
FA8533 Aflcmc Rokb

POSTED

1 day ago

DEADLINE

in 2 months
NAICS: 334515
New
Federal
Upgrade X-Ray Controller
Solicitation # C27-003
Solicitation C27-003, issued by the Department of the Air Force's Oklahoma City Air Logistics Complex, seeks the procurement, delivery, installation, and performance verification of one B2210 Upgrade X-ray controller and automated equipment at Tinker Air Force Base, Oklahoma. The project requires the contractor to provide new servo motors, drives, and manual controls hardware, along with programmable motion control software based on Parker Motion Systems libraries. This system must integrate with existing Vecow PCs and imaging software and serve as an approved equivalent to the X-Ray Apparatus Set under Air Force T.O 33B-1-2. The scope of work also includes the removal and proper disposal of existing equipment and the delivery of three complete sets of engineering manuals. The contractor is responsible for providing four hours of onsite operator and maintenance training for up to eight personnel. Performance must adhere to Tinker Facility and Electrical Standards, as well as DOT and OSHA hazardous material labeling and shipping requirements. Key administrative obligations include certifying the status of hazardous waste generation and HAZMAT usage, as well as providing FOD/DOP training certifications for all employees within ten business days of award. Work is to be performed Monday through Friday between 0530 and 1600, with final acceptance occurring at Tinker AFB on a FOB Destination basis after the Government SME verifies that the system meets or exceeds all OEM specifications.
FA8125 Afsc Pzima

POSTED

1 day ago

DEADLINE

in 6 days

AI Contract Overview

Show more

This contract involves the procurement and deployment of air purifiers for long-term care facilities (LTCFs) in Hawaii, aimed at enhancing indoor air quality and reducing the transmission of airborne diseases such as COVID-19, influenza, and RSV. Recognizing that LTCFs are congregate environments with open communal spaces, the initiative emphasizes the use of portable or mounted in-room air cleaners as a supplementary ventilation strategy. These devices are recommended by the EPA’s Clean Air in Buildings Challenge to improve airflow, especially in aging buildings with stagnant air, thereby mitigating the risk of airborne virus spread. The contract underscores the importance of improving indoor air quality in these settings to protect vulnerable populations, with a focus on increasing ventilation in communal areas like dining and activity rooms. The solicitation was issued by the Hawaii State Department of Health on April 30, 2024, with a response deadline of May 9, 2024. The project is managed under the State and Local Government (SLED) category, and interested parties can contact Amber Wright via email or phone for further details. The initiative aligns with ongoing efforts to enhance health safety measures in LTCFs through improved environmental controls, leveraging portable air cleaning technology to address the unique challenges posed by aging infrastructure and the ongoing threat of airborne infectious diseases.

Documents

4
PDF, High priority: read this firstgeneral-conditions
High
PDF, High priority: read this firstspecial-conditions
High
PDF, High priority: read this firstspecifications
High
PDF, High priority: read this firstrfq
High

Read all 4 documents

Every page of every file, in your free workspace.

Read the documents

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown

This one is closed. Find the next one like it.

Open contracts like this one, right now:

  • EV Charging Station Equipment SupplyOpen now, due in 11 days
  • Electric Utility Metering Test BenchOpen now, due in 32 days
See open contracts like this

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyHawaii State Department of Health
Contacts1 person available
OfficeN/A

Full Description

Show more
The COVID-19 pandemic heightened awareness in LTCFs on optimizing the use of engineering controls and improving indoor air quality. LTCFs are congregate settings with open communal areas where residents gather together in dining rooms and activity rooms. In-room air cleaners (portable or mounted) are considered a ventilation mitigation strategy that can reduce the spread of disease, however not eliminating the risk completely. The Environmental Protection Agency (“EPA”) has a Clean Air in Buildings Challenge and recommends the use of portable air cleaners to increase air flow where it may be insufficient. Most of our LTCFs are in aging buildings with stagnant air flow, therefore portable air cleaners for their communal areas would improve airflow and reduce exposure to airborne viruses (i.e. influenza, respiratory syncytial virus (“RSV”), and COVID-19).

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS