Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Aircraft Fairing Manufacturing or Repair

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the fabrication, repair, or supply of a specific aircraft fairing identified by NSN 1560014357581, intended for use on military aircraft and must comply with FAR 43.203(b) governing maintenance and alterations. This requirement ensures that all work performed meets the rigorous airworthiness and safety standards set by federal aviation regulations for military applications. The item is critical to the structural integrity and aerodynamic performance of the aircraft, and any manufacturing or repair activity must be executed to exacting technical specifications to maintain operational readiness and mission effectiveness. This is a subcontract awarded under the Department of Defense, managed by the Defense Logistics Agency, with the NAICS code 336411 indicating classification within aircraft manufacturing. The contract was posted on July 17, 2026, and is part of the broader DLA procurement infrastructure supporting defense aviation systems. Performance is not restricted to a specific location, and while details such as the point of contact or physical delivery address are not provided, the contract is linked via the DIBBS system for official documentation and tracking. Compliance with applicable regulations, quality assurance protocols, and delivery timelines is mandatory for all parties involved in fulfilling this contractual obligation.

General Info

Fabricate or repair aircraft fairing NSN 1560014357581 per FAR 43.203(b) for military use under DLA subcontract.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

336411 - Aircraft ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabrication, repair, or supply of a specific aircraft fairing (NSN 1560014357581) for military aircraft, compliant with FAR 43.203(b) for maintenance and alterations.

Similar Contracts

Same NAICS industry code

Tire Pressure Gauge Supply (Commercial Off-the-Shelf Item)The contract requires the supply of three units of a tire pressure gauge with the National Stock Number 4910015017982, specified as a commercial off-the-shelf item compliant with DLA Master List standards and all applicable federal and military requirements for packaging, marking, and hazardous material labeling. The item must meet stringent military specifications to ensure reliability and safety in operational environments, with full adherence to procurement directives governing defense-related equipment. The solicitation is issued under the NAICS code 336411 for automobile manufacturing and is classified as a subcontract through the Department of Defense’s LSO Combat Vehicles and Armament agency. The place of performance is designated as New Cumberland, Pennsylvania, with a response deadline of August 10, 2026, and the opportunity was posted on July 30, 2026. No set-aside type is specified, indicating the contract is open to all eligible vendors without preference based on business size or category. All interested parties must comply with the technical and regulatory requirements outlined in the DLA Master List and ensure proper hazardous material documentation as part of delivery.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Precision Manufacturing of Aircraft Cooling System ComponentsThe contract involves the manufacture and delivery of seven scroll housings designed for aircraft cooling turbines, all of which must strictly adhere to military specifications covering quality standards, packaging protocols, and labeling requirements. The work is classified as a subcontract under NAICS code 336411, indicating it falls within the aerospace product and parts manufacturing sector. The place of performance is designated as New Cumberland, Pennsylvania, with the delivery destination tied to this location. The solicitation was posted on July 30, 2026, and responses are due by August 7, 2026, leaving a narrow window for proposers to submit compliant bids. The contracting entity is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, underscoring the critical nature of the components for military aviation systems. All units must meet rigorous defense-grade benchmarks to ensure operational reliability under extreme conditions.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE7L3-26-T-140V

The contract is for the procurement of 335 gaskets with NSN 5330-01-393-9087 under solicitation SPE7L3-26-T-140V, issued by the Department of Defense through the Land Supplier Operations Vehicle Support agency. The response deadline is August 10, 2026, with delivery required within 143 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. The item contains export-controlled technical data subject to ITAR or EAR regulations, requiring prior authorization for any disclosure to foreign persons, regardless of location. Access to this data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA approval. The place of performance is New Cumberland, Pennsylvania, with Susan Diamond listed as the primary point of contact. The NAICS code 336411 classifies this as automotive parts manufacturing.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

SHAFT, SHOULDERED

Solicitation # SPE7L2-26-T-0583

SHAFT, SHOULDERED is a critical application item supplied under contract SPE7L2-26-T-0583 with NSN 3040-01-228-5462 and part number 5544110, manufactured by GENERAL DYNAMICS-OTS, INC. Four units are required at a unit price of $4.00, totaling $16.00, with delivery due in 384 days FOB origin to the designated receiving warehouse in Tracy, California. The item must be packaged in strict compliance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including adherence to MIL-STD-129 for marking and labeling, and RP001 for packaging standards. Palletization must follow DLA procurement guidelines, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the item, except for specific authorized uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents as defined by NAVSEA; portable devices containing mercury must feature shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Inspection and acceptance occur at destination, with zero tolerance for quantity variance. The contract prohibits removal of government identification from non-accepted supplies, and all packaging must reflect the specified Unit of Issue and Quantity per Unit Pack as outlined in the purchase order. The original required delivery date is August 30, 2027.

LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

DEADLINE

Solicitation # SPE7L3-26-T-139X

The contract pertains to the procurement of a gasket with NSN 5330-01-285-2602, requiring five units to be delivered within 128 days of award. The item must comply with strict material restrictions, specifically prohibiting the presence of asbestos as defined in FED-STD-313. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible through the official DLA website, with the applicable revision determined by the solicitation or award date depending on the scale of the acquisition. Government identification must be removed from any non-accepted supplies. The solicitation number is SPE7L3-26-T-139X, issued on July 30, 2026, with responses due by August 10, 2026. The NAICS code is 336411, and the contracting activity falls under the Department of Defense, specifically the Land Supplier Operations Vehicle Support. Performance is designated for New Cumberland, PA, with a zip code of 17070-5002. Primary point of contact is Susan Diamond, reachable via email at dla.flbb1prs@dla.mil or phone at 614-692-5625. The procurement is a federal solicitation with no set-aside designation.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE7L3-26-T-140T

This contract, issued under solicitation SPE7L3-26-T-140T by the Department of Defense through the Land Supplier Operations Vehicle Support office, specifies the procurement of a single gasket item identified by NSN 5330013903838, with a quantity of 43 units at a unit price of $43.00, resulting in a total contract value of $1,849.00. Delivery is required FOB Origin within 156 days after award, with a final delivery deadline of January 14, 2027, to the receiving warehouse in Tracy, California. The item must comply with DLA's Master List of Technical and Quality Requirements, and all packaging must adhere strictly to MIL-STD-2073-1E using preservation method 33, dry storage, and unit container BE OPI:M, with intermediate container D3 and pack code U. Marking must follow MIL-STD-129 without special markings, including 2D Data Matrix barcodes on all packaging levels and proper NSN labeling. A critical requirement mandates the use of a medium-duty, waterproof, greaseproof, opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, specifically to protect against UV degradation for items in Federal Supply Classes 5330 and 5331. This packaging requirement applies to direct vendor deliveries, foreign military sales, and stock shipments. The contract strictly prohibits the intentional introduction of mercury or mercury-containing compounds into the product or its contact surfaces, with limited exceptions for functional applications such as batteries, fluorescent lights, sensors, controls, weapon systems, and specific chemical reagents approved by NAVSEA; any portable fluorescent lamps or instruments containing mercury must be shock-proof and include a secondary containment boundary as defined by NAVSEA 5100-003D. Inspection and acceptance occur at the destination, with the government responsible for verification against compliance with all technical and packaging standards. Contractors must submit all invoices and receiving reports electronically through Wide Area WorkFlow, and compliance with multiple DFARS clauses is mandatory, including safeguarding covered defense information, cybersecurity incident reporting, prohibition of hexavalent chromium, and restrictions on hazardous material storage and disposal. Representation and certification requirements include UEI and CAGE code submission, size status, and socioeconomic status disclosures for small business set-asides, along with affirmative responses regarding the provision of covered telecommunications

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

BRACKET, STRUCTURAL COM

Solicitation # SPE4A5-26-T-316G

The contract requires the supply of nine structural aircraft brackets identified by NSN 1560-01-535-7829, with delivery due in 711 days after award. The specification references multiple technical and quality standards, including MIL-STD-1916 or ASQ H1331 for sampling, with zero nonconformances required unless otherwise stated, and assigns verification levels or AQLs based on attribute criticality. Dimensioning follows ASME Y14.5M, surface texture adheres to ASME B46.1, and part marking must comply with MIL-STD-130 per BAC 5307, including the text “FOR MILITARY USE ONLY,” the manufacturer’s CAGE code, and the design activity’s CAGE code 98748. Material specifications require SAE AMS QQ-A-250/12 and a finish code SRF-2.30 involving chemical treatment per MIL-C-5541 Class 1A or anodizing per MIL-A-8625 Type I or IC Preferred, followed by a single coat of MIL-PRF-23377 Type I Class C2. The item is not subject to Unique Identification requirements per DFARS 252.211-7003(c)(1)(i). The manufacturer must perform a CMMC Level 2 Self-Assessment and comply with DLA packaging and tailored quality requirements, including the removal of government identification from non-accepted supplies. The contract solicitation number is SPE4A5-26-T-316G, issued by the Department of Defense’s ASC Supplier Operations OEM Division, with performance at Tinker AFB, Oklahoma, and primary point of contact Braxton Byerson.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

PISTON, VALVE SHUTOF

Solicitation # SPE4A7-26-T-603B

The contract is for the procurement of 20 units of a piston valve shut-off component, identified by NSN 1660-01-057-5184 and part number 720824, manufactured by approved suppliers including Hamilton Sundstrand Corporation, Meggitt North Hollywood Inc, and Tactair Fluid Controls Inc. The item is classified as a critical application item and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 with specific handling codes, no special marking, and palletization per DLA packaging standards. Inspection and acceptance occur at origin using zero-defect sampling criteria consistent with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes are verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0. Unit of issue is each (EA), with zero tolerance for quantity variance. Delivery is FOB origin with a required delivery date of July 26, 2027, and a 352-day lead time. The item does not require Item Unique Identification per customer request. All documentation and compliance obligations, including source approval and definition of covered defense information, are governed by referenced DLA clauses. The contracting office is the Department of Defense, ASC Supplier Oper AE and AF Division, with Mel Astatike as the primary point of contact and performance address at Tinker AFB, Oklahoma.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

LEVER AND INSERT, VA

Solicitation # SPE4A5-26-T-314F

This contract specifies the procurement of a Lever and Insert, VA, with part number 740446-2 and NSN 1660-01-032-1209, under solicitation SPE4A5-26-T-314F, for a quantity of six units at a unit price of $6.00. Delivery is required within 20 days FOB origin with zero tolerance for quantity variance, and inspection and acceptance occur at the point of origin. The item is designated as a critical application item, and compliance is mandatory with strict technical and quality standards referenced from the DLA Master List, including MIL-STD-1916 or ASQ H1331 sampling methods with zero non-conformances required unless otherwise specified. Attributes are to be classified with corresponding verification levels and AQLs, and all packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with palletization following DLA packaging requirements. The item must be delivered to a designated government facility in Geilenkirchen, Germany, with no special marking required beyond standard compliance. Cybersecurity compliance is mandated at CMMC Level 2 through self-assessment, and covered defense information protocols apply. The unit of issue is each, aligned with DoD and ANSI standards, and the supplier must ensure removal of government identification from non-accepted items. The contract includes specific government-only identifiers and codes for tracking and logistics, with the original required delivery date set for July 31, 2026. The prime point of contact is Rasulbek Kilichev, with additional logistics and freight guidance referenced in DLAD procedural notes to ensure compliance with transportation and forwarding procedures.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M4-26-T-292X

This contract specifies the procurement of four nonmetallic hose assemblies requiring bronze fittings, with strict adherence to technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers. The item is designated as a restricted source requiring government engineering source approval, and all submissions must include complete documentation as mandated by RC001. Supply chain traceability must be maintained per DLA Directive Procurement Note C03 from August 2016, and contractors are obligated to retain all related documentation. The product must not contain any Class I ozone-depleting chemicals, and any proposed substitutes require formal approval unless already authorized by specification. The contract incorporates stringent cybersecurity, export control, and configuration management requirements. Contractors must be CMMC Level 2 certified and comply with DFARS 252.225-7048 regarding the handling of controlled technical data subject to ITAR or EAR regulations. Access to this data is restricted to contractors with approved US/Canada Joint Certification Program status, who have completed mandatory DLA export control training and questionnaires. Physical identification and marking of items are required per RQ017, and inspection and acceptance must occur at the origin. Technical data export controls apply universally, including to foreign nationals within the United States. The item is to be delivered to New Cumberland, PA within 161 days of award, with proposals due by August 10, 2026, under solicitation SPE7M4-26-T-292X, and is governed by the U.S. Department of Defense’s Fluid Handling Division.

FLUID HANDLING DIVISION

POSTED

DEADLINE

COVER ASSEMBLY, ACTU

Solicitation # SPE4A6-26-T-10SM

The contract covers the procurement of 10 units of a Cover Assembly, Actuator with National Stock Number 1660-01-052-6095 under solicitation SPE4A6-26-T-10SM, awarded by the Department of Defense’s ASC Commodities Division. Delivery is required FOB Origin to Tinker Air Force Base, Oklahoma, with a delivery window of 373 days after receipt of order, due by August 16, 2027. The total contract value is $10.00, with no optional quantities or extended pricing specified. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, with specific clauses including RP001 for packaging, RQ001 for tailored quality requirements, RQ017 for bare item marking, and RT001 for measuring and test equipment. Packaging must follow ASTM D3951 unless superseded by DLA requirements, and all packaging and labeling must conform to MIL-STD-129, including palletization per RP001. Item Unique Identification is explicitly not required under DFARS 252.211-7003(c)(1)(i). Sampling for inspection must adhere to MIL-STD-1916 or ASQ H1331 Table 1, with verification levels assigned as VII, IV, and II for critical, major, and minor attributes respectively, and zero non-conformances required unless otherwise stated. Manufacturing may involve casting or forging, and contractors are directed to submit a Casting and Forging Assistance Request if tooling or materials are unavailable. Compliance with cybersecurity requirements is mandated at CMMC Level 2, and the contract incorporates FAR 52.240-93 for safeguarding covered contractor information systems and DFARS 252.240-7997 for NIST SP 800-171 assessment obligations. The contract is a fixed-price type, with inspection and acceptance occurring at the destination under FAR 52.246-2, and invoicing is required through Wide Area WorkFlow (WAWF). Hazardous materials must be labeled per 29 CFR 1910.1200 and 252.223-7001, with Safety Data Sheets submitted prior to award, and special attention is required if the article contains radioactive

ASC COMMODITIES DIVISION

POSTED

DEADLINE

LEVER, REGULATOR CON

Solicitation # SPE4A5-26-T-313Z

The item specified is a Lever, Regulator Con with NSN 1660-01-030-1111, for a single unit to be delivered within 20 days after delivery order issuance under solicitation SPE4A5-26-T-313Z, issued on July 30, 2026, with responses due by August 7, 2026. The procurement is governed by technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with compliance determined by the version in effect on the solicitation issue date. Documentation for source approval must be submitted, and covered defense information rules apply. Packaging must meet DLA specifications, and government identification must be removed from non-accepted supplies. Physical identification of the bare item is required, though Item Unique Identification is not mandated per the service customer’s request. Technical data associated with this item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure or export, including to foreign nationals within the United States; only contractors with approved JCP certification, completed DOD export control training, and DLA authorization may access the data. The contracting activity falls under the Department of Defense, specifically the ASC Supplier Oper OEM Division, with point of contact Rasulbek Kilichev, and the NAICS code is 336411 for aircraft engine and engine parts manufacturing.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supply of Unspecified Hardware/Components (CLINs 0YVT7 and Others)The contract involves the supply and delivery of unspecified commercial off-the-shelf hardware components under multiple contract line items, with all items required to meet Defense Logistics Agency packaging and delivery standards. The work is being procured as a subcontract by the Department of Defense through the Defense Logistics Agency, with performance scheduled to occur at a military postal address in FPO with zip code 96694. The solicitation was posted on July 30, 2026, with proposals due by August 10, 2026, and the North American Industry Classification System code 423830 applies, indicating the focus is on wholesale trade of electronic parts and equipment. The contract does not specify a set-aside category and lacks detailed point of contact information, suggesting the procurement relies on standard DLA processes. Bidders must ensure full compliance with DLA’s logistical and packaging requirements to meet delivery expectations.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Manufacturing of Instruction Plates (NSN 9905-01-436-8526)The contract calls for the fabrication and delivery of six engraved metal instruction plates designed to meet rigorous military standards for labeling, marking, and hazardous material communication, identified by NSN 9905-01-436-8526. These plates must be manufactured to exacting specifications to ensure durability, legibility, and compliance with DoD requirements for use in operational and storage environments. The work falls under NAICS code 332322, indicating it involves the manufacture of fabricated metal products, and is structured as a subcontract under the Defense Logistics Agency, part of the Department of Defense. Performance is to be conducted with the place of performance listed as FPO, ZIP 96694, indicating delivery to a military postal address, likely for overseas or expeditionary use. The solicitation was posted on July 30, 2026, with a response deadline set for August 10, 2026, allowing potential vendors a limited window to submit proposals. No set-aside designation is specified, suggesting the opportunity is open to all qualified contractors without preference for small businesses or other categories. The contract does not include a designated point of contact, implying that all inquiries must be directed through the official DIBBS portal linked in the posting. Compliance with military labeling protocols, precise engraving quality, and adherence to hazardous material communication standards are critical to acceptance, making technical capability and track record in defense-grade manufacturing essential for bidders.

Sheet Metal Work Manufacturing

POSTED

DEADLINE

Fast-Track Military Logistics and DeliveryThe contract mandates the fastest traceable delivery of items to Army Aviation Support Facility 2 in Greenville, South Carolina, with a strict five-day turnaround from the time of order, explicitly excluding parcel post services. Delivery must be accomplished through a reliable, time-sensitive logistics channel that ensures full traceability from origin to destination, meeting the rigorous standards of military procurement. The place of performance is identified with a specific zip code, 29605-5410, confirming the exact location for final handoff. Issued under the NAICS code 484220 for truck transportation, this subcontract is managed by the Defense Logistics Agency under the Department of Defense and was posted on July 30, 2026, with responses due by August 10, 2026. While no specific set-aside designation or organization type is provided, the solicitation indicates a competitive procurement process aimed at securing rapid, accountable, and secure delivery capabilities critical to military operational readiness. The official solicitation link provides further instructions for potential contractors seeking to respond within the defined timeline.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Military-Compliant Packaging and Palletization ServicesThe contract requires the preparation, labeling, marking, and palletization of items in full compliance with Defense Logistics Agency packaging standards and MIL-STD-129 to ensure traceable, secure, and military-compliant unitization for shipment. All work must adhere strictly to DLA’s procurement packaging requirements, emphasizing accurate labeling, proper marking for automated handling systems, and the correct configuration of pallets to meet military logistics protocols. The deliverables are geared toward enabling seamless integration into the Department of Defense supply chain with full traceability from point of origin to final destination. This subcontract is issued under NAICS code 561910 and has a response deadline of August 10, 2026, with the offer due by 5:00 PM local time. Place of performance is designated as Greenville, South Carolina, with a ZIP code of 29605-5410. The contract is administered by the Defense Logistics Agency under the Department of Defense and is accessible via the DIBBS platform using solicitation reference SPE8E6T3941. Participation is open to qualified subcontractors capable of meeting stringent military packaging, labeling, and logistics standards without deviation.

Packaging and Labeling Services

POSTED

DEADLINE

Hazardous Material Compliance and SDS ManagementThe contract requires the provision and ongoing maintenance of Safety Data Sheets for all hazardous materials involved in label production or packaging, ensuring full compliance with OSHA’s 29 CFR 1910.1200 and the Defense Federal Acquisition Regulation Supplement clause DFARS 252.223-7001. This obligation extends to accurate, up-to-date documentation that meets federal safety and transparency standards, with responsibilities including timely updates whenever material composition changes, regulatory requirements evolve, or new hazardous substances are introduced into the production process. The contractor must maintain complete records and be prepared to demonstrate compliance upon request by federal oversight entities. The contract is classified as a subcontract under NAICS code 541690, issued by the Defense Logistics Agency under the Department of Defense, with performance located in Greenville, South Carolina, at zip code 29605-5410. Proposals must be submitted by August 10, 2026, following the posting date of July 30, 2026. Although no set-aside designation is specified, the requirement reflects a critical health and safety function tied to defense supply chain operations. Noncompliance with SDS standards could result in regulatory penalties, production disruptions, or contract termination due to the mandatory nature of the OSHA and DFARS provisions governing hazardous material handling in federal contract environments.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Specialized Label Manufacturing and SupplyThe contract involves the manufacture and supply of a single specialized high-compliance label identified by NSN 7690-01-675-8991, strictly adhering to technical standards set by the Defense Logistics Agency, including MIL-STD-129 for labeling and ASTM D3951 for packaging requirements. The product must meet precise specifications to ensure compatibility with military logistics systems and durability under operational conditions. This is a subcontract opportunity issued by the Department of Defense through the Defense Logistics Agency, with the place of performance located in Greenville, South Carolina, at the zip code 29605-5410. The solicitation was posted on July 30, 2026, with a response deadline set for August 10, 2026, leaving a twelve-day window for potential vendors to submit proposals. The NAICS code 323110 indicates the work falls under printing and related support activities, specifically targeting businesses with expertise in high-precision labeling for federal applications. Although no set-aside classification is specified, the nature of the requirement suggests it is targeted toward contractors with prior experience in military-grade labeling and compliance. All submissions must be made through the DIBBS platform using the provided solicitation link to be considered.

Commercial Lithographic Printing

POSTED

DEADLINE

Small Business Subcontracting for Accelerated PaymentsSmall businesses are invited to participate in manufacturing or logistics activities under a subcontracting opportunity with accelerated payment provisions designed to improve cash flow for subcontractors. The contract is assigned NAICS code 326220, which pertains to plastic packaging and container manufacturing, and performance will take place at the McAlester Army Ammunition Plant in Oklahoma. The solicitation was posted on July 30, 2026, with a response deadline of August 9, 2026, and is managed by the Defense Logistics Agency under the Department of Defense. This opportunity is specifically structured to support small business involvement through faster payment terms, incentivizing participation without a formal set-aside designation yet offering targeted access for smaller firms. The work location is clearly designated at the McAlester facility, and interested parties must submit proposals through the official DIBBS portal prior to the deadline to be considered.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

Domestic and International Freight ShippingThe contract pertains to the domestic and international shipment of tires to the W390 McAlester Army Ammunition Plant installation located at 1C Tree Road, Building 8 in McAlester, Arkansas, with a ZIP code of 74501-5000. The shipment carries DPAS priority status, ensuring expedited handling and delivery in accordance with Defense Priority and Allocation System regulations. All international transport components must comply with U.S.-flag vessel requirements where applicable, aligning with federal maritime transportation mandates. This is a subcontract under the NAICS code 484220 for truck transportation, managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 30, 2026, with responses due by August 9, 2026, and must be submitted through the designated DIBBS platform.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Military-Compliant Marking and LabelingThe contract requires the application of durable markings, barcodes, and shelf life labels in strict compliance with MIL-STD-129 and RQ017 standards to support military logistics tracking systems. All labeling must be permanently affixed to military equipment and supplies to ensure reliable identification, inventory management, and supply chain traceability throughout deployment and storage phases. Work must be performed at the specified location, W390 McAlester Army Ammunition Plant Installation Supply Account, Building 8, 1C Tree Road, McAlester, OK 74501-5000, and delivered in alignment with the Defense Logistics Agency’s operational requirements under the Department of Defense. This is a subcontract opportunity posted on July 30, 2026, with a response deadline of August 9, 2026, and is classified under NAICS code 323117 for printing and related support activities. The work involves precision labeling procedures that meet military durability and readability standards, ensuring compatibility with automated scanning and logistics systems used across DOD facilities. Participation is open to qualified subcontractors capable of executing the marking and labeling tasks per federal specifications, with no set-aside provisions identified. All submissions must be made through the official DIBBS portal linked in the solicitation.

POSTED

DEADLINE

Defense-Compliant Packaging and PreservationThis contract requires the provision of military-standard packaging and preservation services for tires in strict compliance with MIL-STD-2073-1E and MIL-DTL-4 specifications, ensuring long-term shelf life, environmental protection, and readiness for military use. The work must meet rigorous defense logistics requirements for durability, moisture resistance, and tamper-proof sealing to safeguard tires during storage and transport under extreme conditions. The contract is structured as a subcontract with no set-aside designation, and it is being managed by the Defense Logistics Agency under the Department of Defense, specifically through the McAlester Army Ammunition Plant facility in Oklahoma. The packaging must be engineered to maintain tire integrity for extended periods without degradation, and all materials and processes must adhere to federal military standards without exception. The solicitation was posted on July 30, 2026, with responses due by August 9, 2026, and the place of performance is designated at the McAlester Army Ammunition Plant installation supply account located at 1C Tree Road, Building 8, McAlester, Oklahoma, 74501-5000. The NAICS code 326199 indicates this effort falls under other rubber product manufacturing, reflecting the specialized nature of defense-grade tire packaging not covered by standard consumer or commercial rubber product classifications. All parties must ensure that packaging systems are fully traceable, documented, and compliant with DoD preservation protocols to guarantee operational readiness and compliance with supply chain logistics requirements under military control.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Technical Testing and Quality Assurance for TiresThe contract involves the technical testing and quality assurance of military-spec tires to verify compliance with defense acquisition regulations and performance standards. The work requires rigorous performance and durability evaluations under operational conditions to ensure the tires meet the demanding requirements of military applications. Testing must align with established protocols to validate structural integrity, load capacity, tread life, and resistance to environmental stressors such as extreme temperatures, rough terrain, and prolonged use. The evaluation results will support certification for procurement and field deployment within defense logistics systems. The solicitation is issued as a subcontract under NAICS code 541380 by the Defense Logistics Agency through the Department of Defense. The place of performance is designated at the McAlester Army Ammunition Plant in Oklahoma, with responses due by August 9, 2026. All testing activities must adhere to federal defense standards and be conducted in accordance with accepted engineering and quality control practices. Contractors are expected to demonstrate proven experience in military-grade materials testing and provide detailed documentation of methodologies, results, and compliance assessments. The contract does not include set-aside provisions and is open to eligible subcontractors capable of fulfilling the technical scope outlined in the solicitation.

Testing Laboratories and Services

POSTED

DEADLINE

Defense-Grade Pneumatic Tire ManufacturingThe contract calls for the manufacturing of military-specification pneumatic tires identified by NSN 2610-01-194-6238, with full compliance to stringent defense standards covering every phase from production to delivery. This includes rigorous testing procedures to ensure durability, performance under extreme conditions, and adherence to military specifications, along with precise packaging and secure shipping protocols to maintain readiness and integrity throughout the supply chain. The work must be conducted under the oversight of the Defense Logistics Agency on behalf of the Department of Defense, with the sole place of performance located at the W390 McAlester Army Ammunition Plant Installation Supply Account in McAlester, Oklahoma, 74501-5000. This is a subcontract opportunity under NAICS code 326220, which pertains to tire manufacturing, and it is open for response until August 9, 2026, with the solicitation posted on July 30, 2026. Contractors must be prepared to meet all defense-grade requirements without exception, as failure to comply could result in rejection or contract termination. The procurement is part of the broader effort to sustain and modernize logistical support for military operations, requiring certified facilities, qualified personnel, and documented quality control systems. All deliverables must align with federal defense logistics directives, and interested parties are directed to the DIBBS portal for the official solicitation document under reference number SPE7L726Q2099.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE