Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aircraft Harness Manufacturing and Assembly

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract encompasses the fabrication and assembly of a military aircraft harness identified by NSN 4935-01-578-0113, manufactured in strict compliance with source control drawings and applicable military specifications. All work must adhere to stringent traceability protocols to ensure full component lineage and quality assurance throughout production, alongside rigorous durability standards to guarantee operational reliability under demanding military conditions. The subcontract falls under NAICS code 336412, aligning with aircraft component manufacturing, and is issued by the Defense Logistics Agency under the Department of Defense, with performance obligations tied to the broader defense supply chain. The contract was posted on June 25, 2026, and is accessible through the DLA’s DIBBS system under award number SPE4A526P6227.

General Info

Fabricate and assemble military aircraft harness per specs with full traceability and durability for DLA under NSN 4935-01-578-0113.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A5-26-P-6227.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

49--HARNESS,AIRCRAFT,MA

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJun 25

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabrication and assembly of military aircraft harness (NSN: 4935-01-578-0113) per source control drawings and military specifications, including traceability and durability requirements.

Similar Contracts

Same NAICS industry code

VANE,COMPRESSOR,AIR

Solicitation # SPRPA127QXA20

Solicitation SPRPA1-27-Q-XA20 is a fixed-price request for the procurement of 114 units of air compressor vanes (NSN 0RH 2840-01-714-1060) for the Defense Logistics Agency (DLA) Aviation office in Philadelphia. The items are designated as critical safety items, requiring the contractor to maintain ISO 9001 or higher quality certification. Inspection and acceptance will occur at the origin. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Evaluation will include SPRS risk assessments regarding item, price, and supplier risk, and offerors must provide relevant past performance data to remain eligible for award. The contract mandates strict adherence to military packaging and marking standards, specifically MIL-STD-2073-1 and MIL-STD-129, with unique item identification required per MIL-STD-130. All shipments must comply with ISPM 15 wood packaging regulations. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system. Key regulatory requirements include the Buy American Act, the Trade Agreements Act, and DFARS cybersecurity standards for safeguarding covered defense information. The response deadline for this solicitation is November 9, 2026.

Pa DLA Aviation At Philadelphia

POSTED

about 3 hours ago

DEADLINE

TEMPERATURE SENSOR

Solicitation # SPRTA1-27-R-0003

This firm fixed price contract, identified by RFP SPRTA1-27-R-0003, is for the procurement of temperature sensors for the F110 aircraft. The sensors are aluminum alloy components designed to respond to fan discharge temperature changes and regulate pressure. The requirement includes a minimum of 8 and a maximum of 48 units, with a specific delivery deadline of January 1, 2028. This item is designated as a Critical Safety Item and requires Item Unique Identification and CMMC Level 2 certification. The solicitation is expected to be issued on October 26, 2026, with a closing date of December 1, 2026. Woodward, Inc. is listed as the qualified source and has been awarded the three most recent previous contracts for this part. The procurement is being handled by the contracting office at Tinker AFB, Oklahoma, and follows FAR Part 12 policies for the acquisition of commercial items. There is no set-aside for this requirement.

Ok DLA Aviation At Oklahoma City

POSTED

about 3 hours ago

DEADLINE

in about 1 month

Manufacture of Bolt Assembly, Gang ChannelThis subcontract, issued by the Department of Defense DLA Weapons Support ASC, involves the fabrication and assembly of 41 warranted Bolt Assembly, Gang Channel units for aerospace projects. The selected contractor must manufacture parts according to drawing NR 13873 008168670-21033, execute First Article Tests on three units, and adhere to MIL-STD-1916 sampling standards. Performance will take place at Tinker AFB. To be eligible, contractors must hold CMMC Level 2, US/Canada JCP certification, and either SAE AS9003 or ISO 9001 certification. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 336412. Responses are due by November 4, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 22 hours ago

DEADLINE

Aircraft Gas Turbine Engine Air Seal SupplierThis subcontract involves the manufacture or sourcing of 290 aircraft gas turbine engine air seals, specifically GE part number 9688M07P02, for delivery to DLA Distribution San Diego. The supplier must ensure all units of NSN 2840001174916 comply with the DLA Master List of Technical and Quality Requirements, the Buy American Act, and are certified as mercury-free. Strict adherence to military standards is required, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contract is managed under the Department of Defense through the DLA Weapons Support ASC Supplier OEM Division, with performance taking place in San Diego.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 22 hours ago

DEADLINE

Precision Manufacturing of Packing Retaining Plugs (CSI)This subcontract involves the precision manufacturing of 15 Packing Retaining Plugs, part number 48018, for prime contractors supporting the Department of Defense DLA Weapons Support ASC. The work requires strict adherence to technical drawings, the use of zero-based sampling plans for inspection, and bare item marking in accordance with MIL-STD-129. All deliverables must include full traceability and comprehensive quality certification reports. To be eligible, the manufacturer must maintain SAE AS9100 certification and demonstrate CMMC Level 2 compliance. The project is categorized under NAICS code 336412, with the place of performance located at Tinker AFB. Interested parties must respond by November 4, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 22 hours ago

DEADLINE

Manufacturer of Seal Assembly (NSN 2915-00-823-6627)This subcontract opportunity is for the manufacture of 10 units of Seal Assembly (NSN 2915-00-823-6627) to support DLA Weapons Support ASC projects. The components are designated as Air Force Critical Safety Items and must be fabricated to strict OEM specifications using precision machining or molding equipment. All materials used in production must be Berry Amendment compliant, and the contractor is required to maintain an SAE AS9100 quality management system. The project is a total small business set-aside under NAICS code 336412 for the Department of Defense. Completed assemblies are to be delivered FOB Origin to Tinker AFB. Interested parties must submit their responses by November 4, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 22 hours ago

DEADLINE

Supply of Piston Rings (NSN 3040-01-706-2254)This subcontract involves the procurement and delivery of a specific piston ring, identified by NSN 3040017062254, to support prime contractors fulfilling DLA supply contracts for the Department of Defense. The project is managed by the DLA Weapons Support Land Supply Chain and requires the delivery of one piston ring by June 29, 2026, with performance taking place in Port Hueneme. To be eligible, the provider must maintain an active SAM registration and ensure full compliance with all applicable FAR and DFARS supply clauses. A critical technical restriction prohibits the use of additive manufacturing processes in the production of the component unless explicit authorization is granted.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

Supply of Fixed Wire Resistors (NSN 5905010618038)This subcontract, issued by the Department of Defense through the DLA Weapons Support Maritime Supply Chain ESOC Buys, requires the procurement of five Fixed Wire Resistors under NSN 5905010618038. The selected provider must deliver the hardware along with a complete technical data package to prime contractors supporting Department of Defense projects. Performance for this contract is designated for Hill AFB. The supplier must ensure strict adherence to several regulatory and military standards, including IPC/JEDEC J-STD-609 for lead finish labeling and 29 CFR 1910.1200 for hazardous material labeling. Additionally, all deliverables must comply with MIL-STD-2073-1E and MIL-STD-129 standards. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 22 hours ago

DEADLINE

Precision Manufacturing of Port Inserts (P/N 131448)This subcontract involves the precision machining and fabrication of nine high-precision Port Inserts, specifically part number 131448 for Meggitt North Hollywood Inc. The project supports prime contractors under the DLA Weapons Support ASC Supplier Oper AE and AF Div within the Department of Defense, with performance taking place at Tinker AFB. The manufacturer must adhere to Critical Application Item standards, RQ001 quality requirements, and RT001 test equipment standards. Additionally, the contractor is required to maintain NIST SP 800-171 compliance and complete a CMMC Level 2 self-assessment to ensure necessary security protocols are met.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 22 hours ago

DEADLINE

Ground Vent Muffler Fabrication and AssemblyThis subcontract involves the manufacture and supply of 13 Ground Vent Muffler assemblies for prime contractors supporting the Department of Defense DLA Weapons Support ASC. The scope of work includes the fabrication of muffler housings and the integration of filter systems in strict accordance with NSN 2995995098558 and P/N AS132M6695-40. All delivered units must be completed, marked, and packaged according to specifications. Quality assurance is a critical component of the contract, requiring sampling and inspection performed per MIL-STD-1916 or ASQ H1331. To be eligible, the provider must hold SAE AS9003 or ISO 9001 certification. The place of performance is located in Tracy, California, with a response deadline set for November 4, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 22 hours ago

DEADLINE

Supplier of Breather Filter Caps (NSN 1615-0111-40848)This subcontract involves the manufacture or sourcing of 39 breather filter caps, identified by NSN 1615-0111-40848, to support prime contractors working with the DLA Weapons Support Fluid Handling Division. The supplier is responsible for ensuring all units meet strict military specifications, including packaging according to MIL-STD-2073-1E and marking per MIL-STD-129. Additionally, palletization must adhere to the RP001 DLA Packaging Requirements for Procurement Parcels. The completed order must be delivered to the DLA Distribution DDSP New Cumberland Facility in New Cumberland. This procurement falls under NAICS code 336412 and is managed under the Department of Defense. Interested parties should note the response deadline of November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 22 hours ago

DEADLINE

Manufacturer of SAE J1453-3 Tube-to-Boss ElbowsThis subcontract involves the manufacture of one Tube to Boss Elbow for prime contractors supporting the Department of Defense DLA Weapons Support Maritime Supply Chain. The component must be fabricated according to technical standard SAE J1453-3, Revision 06/01/2012, specifically part number SAE J1453-3 16 520320SN with NSN 4730-01-675-1291. Production requires the use of precision machining equipment, and the use of additive manufacturing is strictly prohibited. The selected provider must ensure full compliance with the Buy American and Balance of Payments Program. The final deliverable is one finished and inspected elbow to be performed in Fort Hood, Texas. Interested parties must respond by November 9, 2026, under NAICS code 336412.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 22 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supplier of Specialized Material (NSN 0001S00000053)This subcontract involves the procurement or manufacture of one unit of specialized hardware identified by NSN/MATERIAL 0001S00000053 to support primes delivering contracts for the Defense Logistics Agency. The selected supplier must ensure all items meet strict DLA technical and quality standards and adhere to RP001 DLA Packaging Requirements for Procurement. The opportunity is categorized under NAICS code 423830 and was posted on October 27, 2026, with a response deadline of November 9, 2026. This requirement is managed through the Department of Defense for the Defense Logistics Agency.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

Supplier of Cross Test LevelsThis subcontract involves the procurement or manufacture of two units of the Level, Cross Test, identified by NSN 5210-00-863-5651, to support prime contractors delivering for the Defense Logistics Agency. The supplier is required to ensure all tools are produced in strict compliance with the DLA Master List of Technical and Quality Requirements. Operational requirements include adhering to RP001 DLA Packaging Requirements for all shipments and submitting necessary receiving reports through the Wide Area Workflow system. The contract falls under NAICS code 423830 and is managed under the Department of Defense.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

Supply of Identification Markers (NSN 7690016685478)This subcontract involves the manufacture or procurement of three identification markers under NSN 7690016685478 for prime contractors supporting Defense Logistics Agency supply contracts for the USS GABRIELLE GIFFORDS (LCS 10). The selected provider must ensure all units are marked according to MIL-STD-129 with Special Marking Code 32 and packaged in compliance with MIL-STD-2073-1E. The contract falls under NAICS code 339999 and requires strict adherence to DFARS 252.204-7012 regarding the safeguarding of covered defense information. Performance will take place in FPO 96671, with the final deliverable being three properly marked and packaged identification markers.

All Other Miscellaneous Manufacturing

POSTED

about 22 hours ago

DEADLINE

Supply of MIL-PRF-85285 Polyurethane Coating KitThis subcontract involves the supply of a high-solids, multi-component semigloss gray polyurethane coating for prime contractors supporting Defense Logistics Agency Troop Support. The coating must consist of a pigmented polyester resin solvent and a clear aliphatic isocyanate, matching color 26231 per FED-STD-595. All materials must be produced by a QPL approved manufacturer in accordance with MIL-PRF-85285 and packaged according to MIL-STD-129. The scope of work requires the delivery of one coating kit to China Lake, California. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. Interested parties should note the response deadline of October 30, 2026.

Paint and Coating Manufacturing

POSTED

about 22 hours ago

DEADLINE

Vaneaxial Fan and Impeller Manufacturer/SupplierThis subcontract involves the manufacture or procurement of one Vaneaxial Fan and Axial Fan Impeller to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is required to provide hardware that strictly adheres to the technical data specifications for NSN 4140016182401. All supplied components must be of domestic origin and must undergo rigorous quality control to ensure full compliance with RP001 DLA Packaging Requirements and MIL-STD-129 marking standards. The final deliverable consists of one fully packaged and marked fan and impeller assembly. This requirement falls under NAICS code 333998 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026, for performance located at FPO 96693.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 22 hours ago

DEADLINE

Traceable Freight Transport for Armor PlateThis subcontract involves the transportation and delivery of armor plates for prime contractors supporting Defense Logistics Agency Troop Support Construction and Equipment Metals projects. The selected provider is responsible for hauling heavy metal plating using the fastest traceable methods available, specifically excluding the use of parcel post. For international shipments, the contractor must provide comprehensive ocean bills of lading that include the vessel flag and gross weight. Additionally, the provider is required to submit all necessary proof of delivery and tracking documentation to ensure full visibility of the shipments. The work is associated with NAICS code 484220 and is performed under the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 22 hours ago

DEADLINE

Supply of Armor Plate (NSN 9535-01-611-9013)This subcontract involves the supply of specialized armor plating under NSN 9535-01-611-9013 for prime contractors working on Defense Logistics Agency Troop Support Construction and Equipment projects. The selected provider is responsible for manufacturing or sourcing the armor plate using precision cutting and finishing equipment to ensure strict adherence to technical specifications. All deliverables must comply with MIL-STD-2073-1E packaging standards, specifically requiring the use of a 3 x 2-1/2 inch stiffener to secure items. The contract mandates a delivery timeline of 30 days after the order is placed, with performance centered in the 85613-6000 zip code area.

Fabricated Structural Metal Manufacturing

POSTED

about 22 hours ago

DEADLINE

Defense Logistics Freight Forwarding (USA to Germany)This subcontract involves the specialized transport of aerospace components for prime contractors under Defense Logistics Agency contracts. The scope of work requires the contractor to coordinate the pickup of materials from Eddystone, Pennsylvania, manage all necessary international customs clearance, and ensure final delivery to the NAEW & CF E-3A Component hangar located in Geilenkirchen, Germany. Due to the nature of the cargo, the provider must possess demonstrated experience in international military hardware logistics. The contract is categorized under NAICS code 488510 and mandates a full door-to-door delivery service from the United States to the final overseas destination.

Freight Transportation Arrangement

POSTED

about 22 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on Defense Logistics Agency aerospace contracts. The scope of work involves performing specialized military packaging and marking to ensure components are shipment-ready for international transit. All activities must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contractor is responsible for ensuring that all hazardous material identification and labeling comply with FAR 52.223-3 and DFARS 252.223-7001. This requirement falls under NAICS code 561910. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

Packaging and Labeling Services

POSTED

about 22 hours ago

DEADLINE

Aerospace Sling Assembly FabricationThis subcontract involves the manufacture and supply of one Sling Assembly for prime contractors supporting Defense Logistics Agency aerospace procurement projects. The contractor is responsible for fabricating the assembly according to Part Number D29810-101 and NSN 4240-01-128-7995, ensuring full adherence to the DLA Master List of Technical and Quality Requirements. The project mandates strict compliance with Buy American requirements and DFARS 252.204-7012 regarding NIST SP 800-171 cybersecurity standards. Interested parties must submit responses by November 9, 2026, for this Department of Defense requirement categorized under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

Military Grade Packaging and International Freight ForwarderThis subcontract involves providing specialized military grade packaging and international freight forwarding services for prime contractors under Defense Logistics Agency supply contracts. The scope of work requires strict adherence to MIL-STD-2073-1E and DLA RP001 for packaging, as well as MIL-STD-129 for marking and labeling. The contractor must utilize MIL-SPEC materials and possess the necessary international freight licenses to ensure compliance with military standards. The logistical requirements include managing FOB Destination shipping and customs brokerage to facilitate the delivery of a cabinet to Yokosuka Naval Base in Japan. Performance is centered around the Department of Defense and the Defense Logistics Agency, with the final delivery accepted at the destination. The response deadline for this opportunity is November 9, 2026.

Freight Transportation Arrangement

POSTED

about 22 hours ago

DEADLINE

Small Parts Cabinet ManufacturerThis subcontract involves the manufacture of a small parts cabinet for prime contractors supporting the Defense Logistics Agency. The selected manufacturer must fabricate one completed unit in strict accordance with Basic Drawing 59678 11023404 Revision C and Reference Drawing 19200 11023404. Specific requirements include applying designated color modifications and removing all source identifications to ensure the final product matches NSN 7125012251202. The project requires a contractor equipped with metal fabrication and industrial powder coating capabilities. All work must comply with the Buy American Act. The performance location is designated as FPO 96349, and the response deadline for this opportunity is November 9, 2026.

Sheet Metal Work Manufacturing

POSTED

about 22 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Aircraft Pneumatic Tire Supply

Defense Logistics Agency

POSTED

DEADLINE

C-130 Aircraft Component Supply – STRIKE, CATCH (NSN 534005364317)

Defense Logistics Agency

POSTED

DEADLINE

Aircraft Pneumatic Tire Supply

Defense Logistics Agency

POSTED

DEADLINE

Industrial Manufacturing & Supply of NSN 2840008003949

ASC SUPPLIER OPER AE AND AF DIV

POSTED

CLOSED

Aircraft Tire Supply and Delivery

Defense Logistics Agency

POSTED

DEADLINE

Pneumatic Aircraft Tire Supply for USS GEORGE WASHINGTON

Defense Logistics Agency

POSTED

DEADLINE

Cargo Door Fairing Manufacturing

Defense Logistics Agency

POSTED

DEADLINE

Aviation Component Manufacturing – Clevis, Rod End, AVIA (NSN: 1640-01-724-1457)

Defense Logistics Agency

POSTED

DEADLINE

Aircraft Pneumatic Tire Supply

Defense Logistics Agency

POSTED

DEADLINE

Aircraft Toilet Enclosure Manufacturing

Defense Logistics Agency

POSTED

DEADLINE

Supply of Pneumatic Aircraft Tire

Defense Logistics Agency

POSTED

DEADLINE

Aircraft Stator Component Manufacturing

Defense Logistics Agency

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS