Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aircraft Heat Shield Insulation Blanket Manufacturer/Supplier

Active

Federal

Response Deadline10/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and supply of specialized aircraft heat shield insulation blankets for prime contractors supporting DLA Troop Support. The supplier is responsible for providing high-temperature resistant insulation textiles specifically meeting Part Number 151-029-5 and NSN 5640016457962. The total delivery requirement consists of 15 rolls, with each roll measuring 25 yards. The contract mandates strict adherence to MIL-STD-129 packaging and RP001 palletization standards to ensure proper transport and handling. Additionally, the supplier must comply with DFARS 252.204-7012 regulations regarding the safeguarding of covered defense information. Performance for this Department of Defense requirement will take place in Cherry Point, North Carolina, with a response deadline of October 19, 2026.

General Info

Agency

Department Of Defense → CHERRY POINT PHANTOM RD BLDG

NAICS

314999 - All Other Miscellaneous Textile Product Mills

Place of Performance

CHERRY POINT, NC, 28533-5040, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE8E6-27-T-0195.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

INSULATION BLANKET,

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 8

subcontract

Response DeadlineOct 19

Submission deadline

Response Deadline

10/19/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CHERRY POINT PHANTOM RD BLDG

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → CHERRY POINT PHANTOM RD BLDG

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies specialized aircraft heat shield insulation blankets for prime contractors delivering DLA Troop Support supply contracts. Manufactures or sources high-temperature resistant insulation textiles per Part Number 151-029-5 and NSN 5640016457962. Adheres to MIL-STD-129 packaging and RP001 palletization standards. Complies with DFARS 252.204-7012 for safeguarding covered defense information. Delivers 15 rolls of 25 yards each.

Similar Contracts

Same NAICS industry code

Plate & Frame Filters Press Cloths

Solicitation # Plate & Frame Filters Press Cloths

The Metropolitan Utilities District in Nebraska is seeking bids for the procurement of Plate and Frame Filters Press Cloths. This solicitation is currently open for bidding and utilizes a two step unsealing process with all financial transactions conducted in USD. The bidding window opened on October 9, 2026, and will close on October 21, 2026, at 10:30 AM. Interested parties may direct questions to Sean Guinzy at 402-504-0704. Registration and access to bid questions and responses require a system login.

Metropolitan Utilities District

POSTED

DEADLINE

Embroidered Enlisted Grade Insignia ProductionThis subcontract with C AND T Supply Chain for the Department of Defense involves the manufacture of 12,000 pairs of 4-inch Air Force Staff Sergeant (E-5) embroidered enlisted grade insignia. The production requires the use of industrial embroidery machinery to achieve 8,528 stitches per item in full color, finished with bright white 67206 overedge stitching. To qualify, the manufacturer must be certified by The Institute of Heraldry and ensure all domestic materials used are Berry Amendment compliant. This project supports prime contractors on DLA Troop Support initiatives under NAICS code 314999, with a response deadline set for October 15, 2026.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

Multicam Nylon Outer Pouch ProductionThis subcontract involves the production of protective outer carriers for prime contractors supporting Department of Defense projects under the DLA Troop Support Medical Supply Chain. The scope of work requires the cutting and sewing of heavy-duty Multicam nylon fabric to strict military specifications, utilizing industrial sewing equipment and hardware to integrate carrier systems for personnel harness attachments. The final deliverables consist of Multicam nylon outer pouches equipped with the necessary harness attachments. The project is managed by the Medical Supply Chain FSH and is performed in Mechanicsburg, Pennsylvania. A critical requirement for this contract is Buy American certification. Interested parties should note the solicitation details associated with NAICS code 314999 and the specific response deadline of October 13, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

in about 11 hours

Certified Embroidered Shoulder Sleeve Insignia ProductionThis subcontract involves the manufacture and delivery of 4,500 OCP shoulder sleeve insignias for prime contractors supporting Department of Defense DLA Troop Support C and T Supply Chain projects. The production must strictly adhere to Drawing A-1-530 and Cartoon A-1-530, utilizing Bagby Green 67204 and Black Han 67138 threads. Each unit requires a minimum stitch count of 5,526 and must be finished with hook fastener tape backing. To ensure quality and legal compliance, all insignias must receive certification from the Institute of Heraldry and comply with the Berry Amendment and DFARS 252.225-7012 regulations. The project falls under NAICS code 314999, with a response deadline set for October 16, 2026.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE1C1-27-Q-0053

Solicitation SPE1C1-27-Q-0053 is a Firm Fixed Price request for the procurement of 350,000 semaphore signal flags for the Defense Logistics Agency. The flags must be manufactured from red and yellow acrylic bunting with dimensions of 1 foot 6 inches for both the hoist and fly, designated as Type III, Class 1 Heading. Production must strictly adhere to specification MIL-DTL-2692 and drawing 16696-20A. Delivery is required 227 days after the date of order, with the final destination being Arizona Industries for the Blind in Phoenix, Arizona. The contract mandates a rigorous quality and inspection process, including the submission of two first article samples for visual, dimensional, and shade examination within 30 calendar days of award. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. Packaging and marking must comply with MIL-STD-2073-1E, MIL-F-2692, and MIL-STD-129, with a specific prohibition on the use of mercury or mercury compounds in preservation and packing. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and the maintenance of supply chain traceability documentation.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

Life Preserver Vest Manufacturer (NSN 4220-01-487-3657)This subcontract involves the manufacture and supply of three specialized X-Large white life preserver vests for prime contractors under a Defense Logistics Agency contract. The vests must be fabricated according to NSN 4220-01-487-3657 specifications, featuring 1.5 inch by 1.5 inch nylon loop tape patches and nylon securing cords with a minimum tensile strength of 90 pounds. Production must adhere to mercury-free manufacturing processes and maintain strict compliance with MIL-STD-2073-E and MIL-STD-129 standards. The selected provider is responsible for the complete fabrication, packaging, and marking of the vests. The opportunity was posted on October 8, 2026, with a response deadline of October 16, 2026, under NAICS code 314999.

Defense Logistics Agency

POSTED

DEADLINE

Commercial MK-1 Life Preserver Cover SupplierThis subcontract opportunity with the Defense Logistics Agency involves the procurement of one Commercial MK-1 Life Preserver Cover for prime contractors. The selected supplier is responsible for manufacturing or sourcing covers that strictly adhere to NSN 4220-01-487-3658 standards. All materials must be free of asbestos and mercury in accordance with the DLA Master List of Technical and Quality Requirements. The contract requires full compliance with Buy American and DFARS Part 225 qualifying country regulations. Interested parties must submit their responses by October 16, 2026. The project falls under NAICS code 314999 and requires the final delivery of the completed life preserver cover to the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

Manufacturing of Restraint Covers (NSN 1420010931328)This subcontract involves the manufacturing of 100 specialized restraint covers under NSN 1420010931328 for the DLA Weapons Support ASC Commodities Division. The contractor is required to fabricate the covers according to Navy Drawing 642AS1071-2, utilizing zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. All deliverables must be packaged and marked following MIL-STD-2073-1E and MIL-STD-129 standards. Strict regulatory compliance is mandatory, including adherence to the Berry Amendment and the Buy American Act for all materials. Additionally, the contractor must maintain DFARS 252.204-7012 cybersecurity standards. The project is categorized under NAICS code 314999, with the place of performance located in Yorktown, Virginia.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Certified Military Flag ManufacturingThis subcontract with C AND T Supply Chain for the Department of Defense involves the manufacturing of 100,000 individual flags for DLA Troop Support procurement projects. The flags must be produced using lightweight nylon bunting in strict accordance with Drawing 5-NAV-7 and Specification MIL-DTL-2692. To ensure quality and compliance, the manufacturer is required to provide two first article samples for testing prior to the final delivery of the full order. Eligibility for this contract is limited to vendors who are certified by and listed on the Institute of Heraldry Certified Manufacturer List. The opportunity was posted on October 8, 2026, with a response deadline of October 15, 2026. The project falls under NAICS code 314999 and requires the delivery of 100,000 finished units.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

Manufacturer of MIL-SPEC Fibrous Rope (NSN 4020-00-106-9335)This subcontract involves the manufacture and supply of one 600-foot continuous reel of fibrous rope for prime contractors working on DLA Troop Support procurement projects. The rope must be produced in strict accordance with MIL-R-24337A and MIL-DTL-24337B specifications, with quality assurance adhering to MIL-STD-1916, ASQ H1331, and QAP EQ003. Packaging must comply with MIL-STD-2073-1E standards. To be eligible, the manufacturer must be listed on the Qualified Suppliers List for FSC 4020 and provide a Certificate of Quality Compliance. This Department of Defense requirement falls under NAICS code 314999, with a response deadline set for October 15, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Life Preserver Vest Fabrication (Critical Application)This subcontract involves the fabrication of two small, white life preserver vests for prime contractors supporting Defense Logistics Agency Troop Support projects. The vests must be assembled according to NSN 4220-01-487-2940 Critical Application Item standards, which include the integration of distress marker lights with nylon hook tape patches and the use of 1/16-inch diameter nylon cords secured with bowline knots. All materials used in production must be Buy American compliant and feature mercury-free hardware. The project falls under NAICS code 314999 and is managed through the Department of Defense. Responses for this requirement are due by October 16, 2026.

Defense Logistics Agency

POSTED

DEADLINE

HOSE ASSEMBLY, NONME

Solicitation # SPE8E6-26-T-2707

Solicitation SPE8E6-26-T-2707, issued by the Defense Logistics Agency Troop Support Construction and Equipment office, is for the procurement of one Hose Assembly, Nonme. The required item is identified by NSN 4210016922733 and Holmatro Incorporated part number 158.572.130. Delivery is required within 20 days after order, with an original required delivery date of September 30, 2025. The item is to be delivered FOB Origin to the Commanding Officer or Supply Officer at MCAS New River in Jacksonville, North Carolina, and must be shipped via traceable means. The contract mandates strict adherence to DLA technical and quality requirements, specifically TQ requirement IP025 and RP001 for packaging and palletization. Non-hazardous materials must be commercially packaged per ASTM D3951, while all packaging must be marked and labeled according to MIL-STD-129. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area Workflow system for invoicing and compliance with DFARS 252.204-7012 regarding the safeguarding of covered defense information and NIST SP 800-171 cybersecurity standards. Additionally, the Buy American and Balance of Payments Program applies to all quotes above the micro-purchase threshold.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → CHERRY POINT PHANTOM RD BLDG

Same awarding agency

Supply of Linear Direct Directional Control ValvesThis subcontract involves the supply of five linear direct directional control valves for prime contractors supporting DLA Weapons Support Maritime Hardware projects. The required hardware must match NSN 4820-00-993-7386 and Part Number 80791, with final delivery to DLA Distribution Cherry Point, North Carolina. The contractor must adhere to strict military standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Additionally, the provider is required to maintain Buy American Act compliance and complete a CMMC Level 2 cybersecurity self-assessment. The opportunity is categorized under NAICS code 334418 for the Department of Defense.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Specialized Metal Logistics/HaulingThis subcontract opportunity involves the specialized hauling of metal bars for prime contractors supporting Department of Defense supply contracts. The selected provider will be responsible for transporting metal stock in lengths of 10 to 12 feet from the supplier's origin to DLA Distribution Cherry Point, specifically Building 147 Bay A in North Carolina. To ensure the integrity of the materials, the contractor must utilize flatbed or specialized equipment designed to prevent surface damage or bending. Additionally, the provider must possess the necessary credentials and capabilities to make deliveries directly to military installations. This requirement falls under NAICS code 484220, with a response deadline set for October 14, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

4130 Steel Bar Supplier (QSLD Certified)This subcontract involves the supply of 4130 Steel round metal bars to prime contractors supporting Department of Defense supply contracts. The requirement specifies cold drawn, quench hardened, and tempered bars with a 1-inch diameter and lengths between 10 and 12 feet, adhering to SAE AMS-S-6758B and SAE AMS2806 standards. The total delivery consists of 40 feet of certified steel bar, which must be accompanied by Mill-Material Certification and packaged according to MIL-STD-129. Eligible suppliers must hold QSLD certification and ensure full compliance with the Buy American Act and the Berry Amendment. The performance location for this contract is Cherry Point, and the procurement falls under NAICS code 423430. Interested parties must submit their responses by October 14, 2026.

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

DEADLINE

Supply of Purge Valve Assemblies (PN 2681-102)This subcontract involves the procurement of 80 units of Valve Assembly, Purge (NSN 482004537142) to support DLA Weapons Support Maritime Hardware and Electrical projects. The required components must match part number 2681-102 from Tactair Fluid Controls Inc and adhere to the DLA Master List of Technical and Quality Requirements. All items must be delivered FOB Origin to DLA Distribution Cherry Point, North Carolina, and must strictly comply with MIL-STD-2073-1E and MIL-STD-129 packaging standards. The contract explicitly prohibits the use of additive manufacturing in the production of these assemblies. Managed under NAICS code 332912 for the Department of Defense, the solicitation was posted on October 8, 2026, with a response deadline of October 19, 2026. Performance will take place in Cherry Point, North Carolina.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

VALVE ASSEMBLY, PURG

Solicitation # SPE7MC-27-T-0292

Solicitation SPE7MC-27-T-0292 is a request for quotations issued by the DLA Weapons Support Maritime Hardware/Electrical for the procurement of 80 units of a Valve Assembly, Purge (NSN 4820004537142), identified as a critical application item. The requirement specifies part number 2681-102 from Tactair Fluid Controls Inc. Delivery is required within 333 days, with a need ship date of September 18, 2027, and an original required delivery date of January 3, 2028. The terms are FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution Cherry Point in North Carolina. The contract mandates strict adherence to technical and quality requirements via the DLA Master List, specifically prohibiting the intentional addition of mercury and the use of Class I ozone depleting chemicals. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 requirements. Offerors must submit quotes through the DLA Internet Bid Board System (DIBBS) and are prohibited from proposing items produced via additive manufacturing. Administrative compliance includes the use of Wide Area WorkFlow (WAWF) for invoicing and adherence to various FAR and DFARS clauses regarding telecommunications, sustainable products, and safeguarding covered defense information.

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Solicitation # SPE8E4-26-T-2350

Solicitation SPE8E4-26-T-2350 is a federal procurement issued by DLA Troop Support for 40 feet of round metal bar, specifically Steel Comp 4130 that is cold drawn, quench hardened, and tempered. The material must have a 1-inch diameter and be supplied in whole foot lengths between 10 and 12 feet. This is designated as a critical application item requiring strict adherence to technical standards, including SAE AMS-S-6758B and SAE AMS2806. Delivery is required by March 7, 2027, with a need ship date of March 15, 2027, shipped FOB Origin to DLA Distribution Cherry Point in North Carolina. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). The contractor must provide a Certificate of Quality Compliance (Mill-Material Certification) with every shipment and comply with rigorous marking and packaging standards, including MIL-STD-129 and ASTM A700. Continuous identification markings, such as the contract delivery order number, NSN, and manufacturer details, are mandatory. The procurement is governed by various FAR and DFARS clauses, including safeguarding covered defense information and compliance with the Buy American Act and Berry Amendment. Payment will be processed electronically via the Wide Area WorkFlow (WAWF) system.

Iron and Steel Forging

POSTED

DEADLINE

Solicitation # SPE7L7-26-T-5522

DLA Land And Maritime is soliciting quotes for the procurement of 14 power supplies under NSN 6130016887407. The items must be delivered to DLA Distribution Cherry Point within 158 days after the order is placed. Approved sources for this equipment are identified as 0ZAP8 and 158U6 for part number PS1504H-MB-9630. This opportunity, identified by solicitation number SPE7L726T5522, is a total small business set-aside under NAICS code 335999. All quotes must be submitted electronically by the deadline of October 8, 2026. No hard copies of the solicitation or technical drawings are available, and interested parties should refer to the electronic notice for full details.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

INSULATION BLANKET,

Solicitation # SPE8E6-27-T-0195

Solicitation SPE8E6-27-T-0195 is a request for quotations issued by DLA Troop Support, Construction and Equipment for the procurement of aircraft heat shield insulation blankets. This is designated as a critical application item with NSN 5640016457962 and part number 151-029-5 from the Bell Boeing Joint Project Office. The requirement is for 15 rolls, with each roll consisting of 25 yards. The delivery terms are FOB Origin, with a need ship date of December 10, 2025, and an original required delivery date of February 8, 2027. Inspection and acceptance will occur at the destination, specifically DLA Distribution Cherry Point in North Carolina. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 commercial packaging standards. All packaging must be marked and labeled according to MIL-STD-129, and palletization must follow RP001 requirements. The procurement incorporates several regulatory clauses, including DFARS 252.204-7012 for safeguarding covered defense information and FAR 52.222-36 regarding equal opportunity for workers with disabilities. Quotes must be submitted via the DLA Internet Bid Board System, and the government will not evaluate offers utilizing additive manufacturing processes unless specifically authorized. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

VALVE, LINEAR, DIRECT

Solicitation # SPE7MC-27-T-0293

Solicitation SPE7MC-27-T-0293 is a fixed-price request for quotations issued by DLA Weapons Support Maritime Hardware/Electrical for the procurement of five linear direct directional control valves, identified by NSN 4820-00-993-7386 and part number 80791 from Hydro-Aire Aerospace Corp. The contract requires delivery within 14 days after order, with shipping terms set as FOB Origin to DLA Distribution Cherry Point in North Carolina. Inspection and acceptance will occur at the destination, with acceptance based on zero non-conformances in the sample lot. The contractor must adhere to strict technical and quality standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and CMMC Level 2 self-assessment for cybersecurity. The procurement incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, hazardous material identification, and the safeguarding of covered contractor information systems. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. All quotes are to be submitted via the DLA Internet Bid Board System.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-27-T-0098

Battery Manufacturing

POSTED

DEADLINE

Supply of Fluid Pressure Regulating Valves (CSI)This subcontract involves the supply of eight specialized fluid pressure regulating valves for prime contractors supporting Navy projects under the Department of Defense. The required hardware must strictly adhere to technical drawing 901-344-569, specifically Eaton part number 62495-1. All deliverables must be packaged, marked, and palletized according to RP001 standards, with hazardous materials labeled in compliance with 29 CFR 1910.1200. The performance of this contract takes place in Cherry Point, North Carolina. To be eligible, the provider must maintain CSI compliance and meet CMMC Level 2 cybersecurity standards. The solicitation was posted on October 6, 2026, with a response deadline of October 19, 2026.

Construction and Mining (except Oil Well) Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Structural Angle Supplier (NSN 9540005284767)This subcontract involves the fabrication and supply of structural angles for prime contractors supporting Department of Defense DLA Troop Support, Construction and Equipment Metals contracts. The required materials must match NSN 9540005284767, featuring lengths between 10 to 12 feet and a reference weight of 0.190 LB/FT. All deliverables must strictly adhere to RP001 DLA Packaging Requirements for Procurement and be delivered according to these specifications. The project is categorized under NAICS code 332312 and is associated with the Cherry Point Phantom Rd Bldg. The response deadline for this opportunity is October 19, 2026, with the place of performance located in Cherry Point, North Carolina.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS