Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aircraft Pneumatic Tire Supply

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply of one new, unused military-spec aircraft tire identified by NSN 2620000846037, fully compliant with ASTM D3951 packaging standards and MIL-STD-129 labeling requirements to ensure proper identification and handling throughout the logistics chain. The tire must be shipped FOB Destination to Prince Sultan Air Base in Saudi Arabia, placing the responsibility for transportation and delivery risks on the supplier until the item reaches the designated location. This is a subcontract under the Defense Logistics Agency, part of the Department of Defense, with the NAICS code 336330 indicating classification within the aerospace product and parts manufacturing sector. The solicitation was posted on August 5, 2026, and the contract is linked to the award number SPE7LX26F88V1 under the parent contract SPE7LX19D0029, with no set-aside provisions applied.

General Info

Supply one new military-spec aircraft tire, NSN 2620000846037, FOB Prince Sultan Air Base, under DLA subcontract.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

336330 - Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE7LX26F88V1.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TIRE, PNEUMATIC, AIRCRAFT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedAug 5

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of one new, unused military-spec aircraft tire (NSN 2620000846037), properly packaged and labeled per ASTM D3951 and MIL-STD-129, shipped FOB Destination to Prince Sultan Air Base, Saudi Arabia.

Similar Contracts

Same NAICS industry code

Supply of Steering Drag Link (NSN 2530-01-499-0900)This subcontract, issued by the Department of Defense under the DLA Weapons Support Land Supply Chain, requires the procurement or manufacture of one Steering Drag Link for US Army Logistics Readiness Center projects. The component must be Battle Motors Inc. part number 76C-27 and strictly adhere to NSN 2530-01-499-0900 specifications. The project falls under NAICS code 336330 and requires delivery FOB Origin to Fort Hood, Texas. The contractor must ensure full compliance with DFARS 252.225-7001 Buy American requirements and DFARS 252.204-7012 cybersecurity standards. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

LINK ASSEMBLY, TRACK

Solicitation # SPE7L1-27-T-2874

Solicitation SPE7L1-27-T-2874 is a small business set-aside request for quotations issued by the DLA Weapons Support Land Supply Chain for one link assembly, track, identified by NSN 2530-01-629-7622. The requirement is for a single unit to be delivered to Fort Riley, Kansas, within 10 days after receipt of order. This procurement is open to full and open competition with a price evaluation preference for HUBZone small business concerns. The manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003, and origin inspection is required. The contract includes stringent regulatory and security requirements, including CMMC Level 2 certification and strict adherence to ITAR and EAR export controls. Prohibited materials include Class I ozone-depleting chemicals and hexavalent chromium. Packaging must follow MIL-STD-129 and ASTM D3951, with specific requirements for hazardous materials under TQ IP025. Invoicing and payment must be processed electronically through the Wide Area Workflow system. All quotations must be submitted via the DIBBS portal by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

DRAG LINK, STEERING

Solicitation # SPE7L1-27-T-2835

Solicitation SPE7L1-27-T-2835 is a request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of one steering drag link, identified by NSN 2530-01-499-0900 and Battle Motors Inc. part number 76C-27. The item is to be delivered FOB Origin to the US Army Logistics Readiness Center at Fort Hood, Texas, with a required delivery date of October 23, 2026, and a delivery window of 10 days after award. Inspection and acceptance will take place at the destination per FAR 52.246-2. The contract mandates strict adherence to technical and quality standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Palletization must follow DLA requirement RP001, and the use of mercury or mercury compounds in packaging is prohibited. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American and Balance of Payments Program under DFARS 252.225-7001. Additionally, the contractor must comply with cybersecurity reporting standards under DFARS 252.204-7012 and hazardous material labeling requirements per DFARS 252.223-7001.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE7L1-27-T-2882

Solicitation SPE7L1-27-T-2882 is a small business set-aside request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of one brake disc, identified as NSN 2530-01-713-9297 and Oshkosh Aerotech, LLC part number 627-8476-003. This is designated as a critical application and restricted source item, requiring engineering source approval by the Government Design Control Activity. The required delivery date is October 23, 2026, with a delivery window of 20 days after the order. Shipping is FOB Origin, and both inspection and acceptance will occur at the destination, specifically Naval Base Guam. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. It prohibits the use of Class I ozone-depleting chemicals and requires compliance with the Buy American Act and the Berry Amendment. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and registration in the System for Award Management. Cybersecurity compliance is required under NIST SP 800-171 and DFARS 252.204-7012. Quotes must be submitted through the DIBBS portal, and offerors are encouraged to provide quantity ranges to facilitate procurement flexibility.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

HUB, WHEEL, VEHICULAR

Solicitation # SPE7L1-27-T-2853

Solicitation SPE7L1-27-T-2853 is a small business set-aside request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of two vehicular wheel hubs, identified by NSN 0001016547023 and part number 008-430-03. The contract specifies a delivery timeframe of five days after receipt of order, with an original required delivery date of October 28, 2026. Terms are FOB Origin, while both inspection and acceptance are to take place at the destination in Edinburgh, Indiana. The procurement is subject to strict technical and quality standards, including packaging requirements per ASTM D3951 and RP001, and marking and labeling in accordance with MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, notably those concerning the Buy American Act, cybersecurity safeguarding under DFARS 252.204-7012, and prohibitions on covered telecommunications equipment. The solicitation is categorized under NAICS code 336330 and requires submissions through the DLA BID BOARD SYSTEM.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

HUB, WHEEL, VEHICULAR

Solicitation # SPE7L3-27-T-0835

Solicitation SPE7L3-27-T-0835 is a fixed-price request for quotations issued by the DLA Weapons Support Land Supplier Opns Vehicle SPT for 348 units of Vehicular Wheel Hubs (NSN 2530-01-063-5666). This procurement is designated as a HUBZone set-aside, providing a price evaluation preference to certified HUBZone concerns. The items must be manufactured using a forging process, which requires specific tooling. Delivery is required within 75 days after receipt of order, with a final delivery destination in New Cumberland, Pennsylvania. The contract mandates strict technical and security compliance, including CMMC Level 2 certification and adherence to ITAR or EAR export controls for technical data. Quality assurance requires the manufacturer to maintain an ISO 9001:2015 compliant system, with technical inspection and acceptance occurring at the origin. Packaging must follow Special Packaging Instruction AK10635666 and MIL-STD-129, with a strict prohibition on mercury compounds. Additionally, the government prohibits the use of additive manufacturing for these parts unless specifically authorized. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-2757

Solicitation SPE7L1-27-T-2757 is a small business set-aside issued by the DLA Weapons Support Land Supply Chain for the procurement of two detent plates, identified by NSN 2530-01-685-1669. This is a restricted source item requiring engineering source approval from the Government Design Control Activity. The required delivery is 20 days after receipt of order, with the destination being the General Depot of Naval Supplies in Kaohsiung City, Taiwan. Inspection and acceptance are both conducted at the origin. The contract mandates strict quality and technical compliance, requiring manufacturers to maintain an inspection system compliant with SAE AS9003 or ISO 9001 tailored to SAE AS9003. Additive manufacturing is prohibited unless specifically authorized. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA RP001 requirements. Technical data is subject to ITAR or EAR export controls, and contractors must be approved by the DLA controlling authority to access such data. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including CMMC Level 2 certification requirements, the Buy American Act, and prohibitions on covered defense telecommunications equipment. Sampling for acceptance must follow MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in the sample lot.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

HUB, WHEEL, VEHICULAR

Solicitation # SPE7L1-27-T-2782

Solicitation SPE7L1-27-T-2782 is a fixed-price request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of six vehicular wheel hubs, identified by NSN 2530-01-650-9683. The requirement is issued under the First Destination Transportation program, requiring offers to be submitted based on FOB Origin. Delivery is required within 10 days after the order, with the destination point of inspection and acceptance located in Poland. This procurement is not a small business set-aside, and all quotes must be submitted electronically via the DLA Internet Bid Board System. The contract mandates strict adherence to military packaging and marking standards, specifically MIL-STD-2073-1E for preservation and MIL-STD-129 and ASTM D5445 for labeling. Palletization must comply with DLA requirement RP001. Invoicing and receiving reports are to be processed through the Wide Area WorkFlow system. The agreement incorporates various DFARS and FAR clauses, including those regarding cybersecurity incident reporting, the Buy American Act, and the prohibition of covered defense telecommunications equipment. Technical and quality requirements are governed by the DLA Master List, and the contractor is responsible for ensuring package designs are adequate for safe delivery.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

PARTS KIT, STEERING GEA

Solicitation # SPE7L3-27-T-0838

Solicitation SPE7L3-27-T-0838 is a fixed-price request for quotations issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the procurement of 23 steering gear parts kits. The required items are identified by NSN 2530-01-738-3328, with acceptable part numbers including Hamilton Jet, Inc. P/N 111235 or Kraft Power Corporation P/N 111235. This procurement is designated as a Service-Disabled Veteran-Owned Small Business set-aside, requiring vendors to be certified by the Small Business Administration to be eligible for award. The contract specifies a required delivery date of March 18, 2027, with delivery and inspection points set at the destination, specifically DLA Distribution San Joaquin in Tracy, California. Packaging must adhere to MIL-STD-2073-1 Appendix D for kits and RP001 requirements, while marking must comply with MIL-STD-129. Key restrictions include a total prohibition on Class I ozone-depleting chemicals and strict adherence to the Buy American Act and Berry Amendment. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

TIE ROD END, STEERING

Solicitation # SPE7L1-27-T-2703

Solicitation SPE7L1-27-T-2703 is a small business set-aside issued by the DLA Weapons Support Land Supply Chain for the procurement of steering tie rod ends for 1980 Ford P/U trucks (F100/F150). The requirement consists of two line items, each for a quantity of 4 units (total of 8), under NSN 2530-01-187-7299. The contract specifies a delivery timeframe of 5 days after order, with an original required delivery date of October 26, 2026. Delivery is FOB Origin, and both inspection and acceptance will occur at the destination, specifically the US Army 0015 CS BN CO A Distribution center at Fort Hood, Texas. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 for labeling and RP001 for palletization. Non-hazardous materials must follow ASTM D3951, while hazardous materials require packaging per TQ requirement IP025. Technical and quality requirements are governed by the DLA Master List, and the removal of government identification from non-accepted supplies is required per RQ011. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system. The acquisition is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and specific DFARS clauses regarding cybersecurity and the prohibition of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

WHEEL ASSEMBLY, PNEUMAT

Solicitation # SPE7LX-27-U-0114

Solicitation SPE7LX-27-U-0114 is a request for quotations issued by the DLA Weapons Support Strategic Acq Program Directorate for the procurement of pneumatic tire wheel assemblies, specifically Hutchinson Industries part number AS-1609-080, NSN 2530017230184. This is a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 dollars and an estimated annual quantity of 34 units, though this quantity is not firm. The contract specifies a delivery period of 73 days after order, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 for labeling and RP001 for palletization. Non-hazardous materials should be packaged per ASTM D3951, while hazardous materials must follow the Hazard Communication Standard and TQ requirement IP025. Award evaluation is based on the price quoted for the estimated annual demand, and the buy may be eligible for automated award provided the offeror does not propose used or remanufactured items. Administrative requirements include the use of Wide Area WorkFlow for invoicing and compliance with the Buy American Act and Berry Amendment.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

CALIPER ASSEMBLY, DI

Solicitation # SPE7L1-27-T-1562

Solicitation SPE7L1-27-T-1562 is a fixed-price request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of 45 Caliper Assembly, DI units. This item, identified as a critical application item with NSN 2530-12-417-4793 and Iveco Defence Vehicles S.p.A. part number 5802448736, is classified as a commercial item. The procurement is a total small business set-aside under NAICS code 336330. Delivery is required by June 24, 2026, with a need ship date of January 13, 2026, shipped FOB Destination to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Prohibitions are in place regarding the use of Class I ozone-depleting chemicals and mercury or mercury compounds in preservation and packaging. Offerors must comply with the Buy American Act, the Berry Amendment, and provide supply chain traceability documentation prior to shipment. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS 252.204-7012 for safeguarding covered defense information. All quotes must be submitted via the DLA Internet Bid Board System.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

MIL-STD Packaging and Logistics ServicesThis subcontract for MIL-STD Packaging and Logistics Services supports prime contractors fulfilling Defense Logistics Agency supply contracts. The scope of work involves providing specialized military-grade packaging and palletization services, ensuring all items are processed according to MIL-STD-129, RP001, and ASTM D3951 standards. The provider must utilize compliant labeling and industrial equipment to deliver shipments that are fully prepared for FOB Origin transport. The project is managed under NAICS code 561910 for the Department of Defense and will be performed in Phoenix, Arizona. Interested parties should note the response deadline of November 9, 2026, for this specific logistics requirement.

Packaging and Labeling Services

POSTED

about 3 hours ago

DEADLINE

Safety Cone Supplier (NSN 6250-00-334-6183)This subcontract involves the procurement of 589 safety cones to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is responsible for manufacturing or sourcing cones identified by NSN 6250-00-334-6183, ensuring all materials strictly adhere to the DLA Master List of Technical/Quality requirements and comply with the Buy American Act. The completed order of 589 safety cones must be delivered FOB Origin to Phoenix, Arizona. This requirement falls under NAICS code 339999 and is managed by the Department of Defense for the Defense Logistics Agency.

All Other Miscellaneous Manufacturing

POSTED

about 3 hours ago

DEADLINE

Supply of Toggle Switches (NSN 5930-00-655-1507)This subcontract involves the supply of 11 toggle switches for prime contractors supporting Defense Logistics Agency contracts. The switches must strictly adhere to NSN 5930-00-655-1507 specifications, with a specific prohibition against the use of additive manufacturing. All items must be delivered FOB Destination and must comply with packaging and marking standards established by MIL-DTL-28786, MIL-STD-129, and RP001. The contractor is required to maintain rigorous cybersecurity and data protection standards, specifically ensuring compliance with NIST SP 800-171 and DFARS 252.204-7012. This procurement falls under NAICS code 334419 and is managed through the Department of Defense.

Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

Domestic Electrical Component Supply (Berry Amendment Compliant)This subcontract involves the supply of raw wire, connectors, shielding, and housing for prime contractors working on Defense Logistics Agency procurement projects specifically for NSN 5995-01-696-1261. The provider is responsible for sourcing electrical grade materials that meet strict technical requirements and must include a Certificate of Conformance with all delivered components. A critical requirement of this agreement is the provision of certification of origin to ensure full compliance with the Buy American Act and the Berry Amendment. Managed under NAICS code 335131 for the Department of Defense, the contract ensures that all domestic electrical components meet the necessary federal standards for military application.

Residential Electric Lighting Fixture Manufacturing

POSTED

about 3 hours ago

DEADLINE

Special Purpose Electrical Cable Assembly FabricationThis subcontract involves the fabrication and assembly of a special purpose electrical cable assembly, specifically NSN 5995-01-696-1261, for prime contractors working on Defense Logistics Agency procurement projects. The manufacturer is required to produce one completed, tested, and packaged assembly in strict accordance with the DLA Master List of Technical and Quality Requirements (RA001), with a specific prohibition against the use of additive manufacturing. All deliverables must be packaged and marked according to MIL-STD-129 and MIL-STD-2073-1E standards. This opportunity falls under NAICS code 335931 and is managed by the Department of Defense. Interested parties must respond by November 5, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

Supplier of Flat Washers (NSN 5310-01-097-9936)This subcontract involves the procurement of 109 specialized flat washers to support Defense Logistics Agency aircraft component projects. The supplier is responsible for manufacturing or sourcing the components in strict accordance with Sikorsky Aircraft Corporation part number SS5104-01 and NSN 5310-01-097-9936. All items must be delivered to DLA Distribution DDSP New Cumberland. The contract mandates rigorous adherence to quality and regulatory standards, including compliance with the Buy American Act and the Berry Amendment. Packaging must meet ASTM D3951 specifications, while marking and palletization must follow MIL-STD-129 and RP001 guidelines. The opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

Military-Spec Packaging and International Shipping (Guam)This subcontract through the Defense Logistics Agency involves specialized military packaging, marking, and international transportation services for prime contractors delivering supplies to Guam. The scope of work specifically requires the packaging of mufflers in accordance with ASTM D3951, marking per MIL-STD-129, and palletization following RP001 requirements. The selected provider must utilize the fastest traceable shipping methods to ensure delivery to the MESG One Detachment in Guam. This opportunity falls under NAICS code 488330 and is managed by the Department of Defense.

Navigational Services to Shipping

POSTED

about 3 hours ago

DEADLINE

Exhaust Muffler Supply (NSN 2990-01-566-4579)This subcontract involves the manufacture or procurement of one specialized exhaust muffler, identified by NSN 2990-01-566-4579, to support prime contractors fulfilling Defense Logistics Agency supply contracts. The provider must ensure the product complies with DLA Master List of Technical and Quality Requirements RA001 and RQ011, while maintaining strict supply chain traceability documentation as specified in the contract terms. Managed under NAICS code 336390 for the Department of Defense, the agreement requires the delivery of a single completed unit. The solicitation was posted on October 28, 2026, with a response deadline set for November 4, 2026.

Other Motor Vehicle Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

Supply of Enamel (NSN 8010-00-297-0554)This subcontract involves the supply of 5,000 gallons of enamel paint to prime contractors supporting Defense Logistics Agency Troop Support contracts. The material must strictly adhere to NSN 8010002970554 and UFGS-09900 Division 09 specifications, while remaining compliant with the DLA Master List of Technical and Quality Requirements. Delivery is designated as FOB Destination, with the place of performance located at Hunter AAF. The contractor is responsible for ensuring all packaging and labeling meet MIL-STD-129 and MIL-STD-2073-1E standards, specifically including the provision of lot and batch numbers. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. The response deadline for this requirement is November 3, 2026.

Paint and Coating Manufacturing

POSTED

about 3 hours ago

DEADLINE

Supply of Sleeve Spacers (NSN 5365-01-566-4847)This subcontract involves the manufacture or sourcing of four sleeve spacer units, identified by NSN 5365-01-566-4847, to support prime contractors under a Defense Logistics Agency supply contract. The selected provider must ensure all materials comply with the Buy American Act and the Berry Amendment. Final delivery of the units is required at Fort Bragg, North Carolina. Strict adherence to technical specifications is mandatory, including packaging according to ASTM D3951, labeling per MIL-STD-129, and palletization following RP001 standards. The opportunity falls under NAICS code 332721 and is managed through the Department of Defense.

Precision Turned Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

Mold Release Agent Supplier (NSN 8030-01-233-1265)This subcontract involves the supply of a specific mold release agent, identified by NSN 8030-01-233-1265, to support prime contractors fulfilling Defense Logistics Agency requirements. The supplier must provide one 5-gallon can delivered FOB Destination to Illinois and US APO AE. To ensure product integrity, the agent must maintain a 12-month shelf life and be stored at temperatures between 60 and 80 degrees Fahrenheit. The contractor is required to adhere to strict regulatory and military standards, including compliance with the Buy American Act, the Berry Amendment, and 29 CFR 1910.1200. Additionally, all shipments must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129. This procurement falls under NAICS code 325998 and is managed through the Department of Defense.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 3 hours ago

DEADLINE

Supply of Refractory Castable Mix (NSN 9350015694317)This subcontract involves the supply of refractory castable mix to prime contractors supporting Defense Logistics Agency contracts for the USS George H W Bush and USS Abraham Lincoln. The provider is responsible for manufacturing or sourcing material that meets NSN 9350015694317, with strict requirements for packaging according to MIL-STD-2073-1E and marking per MIL-STD-129. The agreement mandates full compliance with the Buy American Act and the Hazard Communication Standard. The scope of work requires the delivery of two units of castable mix on a FOB Destination basis. This procurement falls under NAICS code 327120 and is managed through the Department of Defense. Interested parties must adhere to the response deadline of November 9, 2026.

Clay Building Material and Refractories Manufacturing

POSTED

about 3 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Shock Absorber Supply and Delivery

Defense Logistics Agency

POSTED

DEADLINE

Small Business Joint Venture or Teaming Partner

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

CLOSED

Brake Shoe Parts Kit Manufacturing & Assembly

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

CLOSED

PITMAN ARM, STEERING

Solicitation # SPE7L3-26-T-148L

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

CLOSED

IDLER ASSEMBLY, TRAC

Solicitation # SPE7L1-26-T-698T

Defense Logistics Agency

POSTED

DEADLINE

TUBE, SHOCK ABSORBER

Solicitation # SPE4A723F6728

Defense Logistics Agency

POSTED

DEADLINE

VALVE, STEERING SELE

Solicitation # SPE7L3-26-T-042B

Defense Logistics Agency

POSTED

DEADLINE

SHOCK ABSORBER, DIRE

Solicitation # SPE7L3-26-T-9109

Defense Logistics Agency

POSTED

DEADLINE

SHOCK ABSORBER, DIRE

Solicitation # SPE7LX26F87S5

Defense Logistics Agency

POSTED

DEADLINE

ARM ASSEMBLY, PIVOT,

Solicitation # SPE7L3-26-T-043V

Defense Logistics Agency

POSTED

DEADLINE

BEADLOCK, PNEUMATIC

Solicitation # SPE7L1-26-T-918B

LAND SUPPLY CHAIN

POSTED

CLOSED

25--WHEEL ASSEMBLY,PNEU

Solicitation # SPE7L1-26-T-793Q

Defense Logistics Agency

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS