Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aircraft Structural Support Fabrication

Open

Federal

Response Deadline11/16/2026, 11:00:00 AM CST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled Aircraft Structural Support Fabrication, involves the precision machining and fabrication of 14 aircraft structural component supports for the DLA Weapons Support Agency. Work must be performed according to Reference Drawing 43999 ST0501LT0007 and TDP Rev B Gen 3, with a strict prohibition on the use of additive manufacturing. The project is designated as a Total Small Business Set-Aside under NAICS code 336413 and will be performed at Tinker AFB. To be eligible, contractors must maintain ISO 9001:2015 certification and ensure full compliance with CMMC Level 2 and DFARS 252.204-7012 standards. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

General Info

Fabricate 14 aircraft structural supports for DLA at Tinker AFB per specific drawings.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE4A7-27-T-3494.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SUPPORT, STRUCTURAL COM

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 8

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 11:00:00 AM CSTin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs precision machining and fabrication of aircraft structural component supports for prime contractors on DLA Weapons Support Agency projects. Fabricates parts per Reference Drawing 43999 ST0501LT0007 and TDP Rev B Gen 3. Prohibits additive manufacturing. Requires ISO 9001:2015, CMMC Level 2, and DFARS 252.204-7012 compliance. Delivers 14 finished structural component supports.

Similar Contracts

Same NAICS industry code

Support Assembly Fabrication and SupplyThis subcontract involves the fabrication and supply of 13 Support Assembly units, identified by NSN 1680-01-129-8302, for prime contractors supporting DLA supply contracts. The work must be performed in accordance with specific technical data and the DLA Master List of Technical and Quality Requirements. All deliverables must be packaged according to ASTM D3951 and marked per MIL-STD-129, with final delivery of the completed assemblies handled as FOB Destination. Managed by the DLA Weapons Support Aviation Supply Chain under the Department of Defense, the project is categorized under NAICS code 336413 with performance taking place in Cherry Point. A critical compliance requirement for this contract is a CMMC Level 2 Self-Assessment. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

Precision Fabrication of Inboard Logistic RailsThis subcontract involves the precision fabrication of Inboard Logistic Rails for prime contractors supporting DLA Weapons Support ASC aerospace projects. The selected manufacturer will produce two production units and two First Article Testing units based on government base drawings, with final delivery to Robins Air Force Base in Georgia. To qualify, contractors must maintain SAE AS9003 or ISO 9001 quality systems and hold CMMC Level 2 certification. Additionally, approval from the US/Canada Joint Certification Program is required. The project falls under NAICS code 336413 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Swivel Joint, Tube (NSN 4730-01-395-2235)This subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, requires the manufacture or sourcing of 94 specialized tube swivel joints identified by NSN 4730-01-395-2235. The supplier must ensure all units meet the technical acceptability requirements of the Engineering Support Activity and adhere to 4730 FSC fluid control and pipe/tube fitting material standards. Delivery of the units is designated as FOB Origin. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336413. Interested parties must respond by November 23, 2026, to provide these components for prime contractors fulfilling DLA supply contracts.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

Mounting Bracket Assembly ManufacturingThis subcontract opportunity is for the fabrication and assembly of two Mounting Bracket Assemblies under NSN 1450-01-657-9533 for the DLA Weapons Support ASC. The project requires precision machining and assembly according to technical drawings, with quality assurance conducted through sampling and inspection per MIL-STD-1916 or ASQ H1331. Performance will take place in Portsmouth, with the work supporting prime contractors on Department of Defense projects. The contract is designated as a Total Small Business Set-Aside under NAICS code 336413. To be eligible, contractors must maintain CMMC Level 2 and DFARS 252.204-7012 compliance. The solicitation was posted on November 8, 2026, and requires a response by November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Supply of NSN 4710-00-0033939 (Bell Textron Component)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, requires the supply of one unit of NSN 4710-00-0033939. The required part must be sourced as Bell Textron part number 212-060-737-021 or 212-060-737-21. Performance of this contract takes place in Cherry Point, and the work falls under NAICS code 336413. The contractor must adhere to strict military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and either MIL-STD-1916 or ASQ H1331 for sampling and inspection. Additionally, the supplier is required to maintain compliance with DFARS 252.225-7001. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

Manufacture of Valve Disks (P/N 3169241-2)This subcontract involves the manufacture of 78 valve disks for prime contractors supporting DLA Weapons Support ASC projects. The components must be fabricated according to NSN 4810014875190 and Honeywell Aerospace P/N 3169241-2 specifications. Due to the nature of the parts as Critical Application Items, the project requires precision machining and strict adherence to zero-non-conformance sampling standards per MIL-STD-1916 or ASQ H1331. The contractor is required to maintain DFARS 252.204-7012 compliance and ensure all bare items are marked in accordance with RQ017. Performance of the contract will take place in Tracy, California, under NAICS code 336413. The final deliverable consists of 78 finished valve disks meeting all specified technical and regulatory requirements.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

Precision Machining of Linear Actuating Cylinder HeadsThis subcontract involves the precision CNC machining of Linear Actuating Cylinder Heads for the Department of Defense, specifically supporting DLA Weapons Support ASC aerospace projects. The selected contractor will utilize CNC milling, turning, and boring to fabricate components according to a specific technical data package and strict aerospace tolerances. The initial requirement focuses on the delivery of two finished components for First Article Testing. To be eligible, the contractor must maintain ISO 9001:2015 certification and ensure full compliance with ITAR and EAR regulations. The work is associated with NAICS code 336413 and is designated for performance at Tinker AFB. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Aircraft Access Cover Manufacturer/SupplierThis subcontract, issued by the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division, requires the manufacture or procurement of five aircraft access covers under NSN 1560002470215. The supplier must ensure all units meet strict technical specifications and comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contract mandates the use of domestic materials and explicitly prohibits the use of additive manufacturing unless prior authorization is granted. Final delivery of the five units is subject to acceptance via origin inspection. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026, falling under NAICS code 336413.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

Aviation Rod End Clevis SupplyThis subcontract, issued by the Department of Defense through the DLA Weapons Support ASC Supplier Order OEM Division, involves the procurement of eight high-precision aviation rod end clevises. The required components must be Lockheed Martin part number 235A931-1, identified by NSN 1640-01-555-4479. Because these are classified as Critical Application Items, they must adhere to strict aviation safety and quality standards. Eligible providers must be authorized manufacturers or authorized distributors for Lockheed Martin Corporation to ensure the authenticity and certification of the aviation-grade hardware. The performance of this contract is centered in Jacksonville, and the response deadline for the solicitation is November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

Aircraft Gas Turbine Engine Inlet Cone FabricationThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC, requires the manufacture of four high-precision inlet cones for aircraft gas turbine engines. The components must be fabricated according to RTX P/N 51A681, TDP Rev A Gen 1, and the associated Quality Assurance Provisions. To ensure compliance and safety, the contractor must hold ISO 9001:2015 certification and FAA Airworthiness Approval, and all items must be marked with Item Unique Identification per MIL-STD-130. The project is designated as a Total Small Business Set-Aside under NAICS code 336413, with performance taking place in New Cumberland. Interested parties must respond by November 16, 2026. The final deliverable consists of four finished and certified inlet cones meeting all specified technical and regulatory standards.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Aerospace Light Housing Fabrication (Boeing P/N 417T5021-1B)This subcontract involves the fabrication of five light housings for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The manufacturer must produce the units according to Boeing part number 417T5021-1B engineering drawings and specifications, ensuring strict adherence to FAA airworthiness approval and bare item marking requirements. Performance will take place at Tinker AFB. To qualify, the contractor must utilize precision machining equipment and maintain compliance with ISO 9001:2015 and NIST SP 800-171 standards. Final deliverables include the five finished housings accompanied by a Certificate of Airworthiness and Conformance, as well as comprehensive traceability documentation.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Custom Cylinder Casting and ForgingThis subcontract for Custom Cylinder Casting and Forging supports the DLA Weapons Support Land Supply Chain within the Department of Defense. The selected provider will be responsible for supplying raw cast or forged metal components used as base structural elements for linear actuating cylinders. This process involves utilizing custom tooling and dies to meet specific technical requirements for prime contractors. Performance for this contract will take place in Tracy, California. Due to the nature of the defense components, the contractor must maintain US/Canada Joint Certification Program certification and ensure full compliance with ITAR and EAR regulations. The solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Military-Grade Packaging and Labeling ServicesThis subcontract opportunity is for military-grade packaging and labeling services supporting prime contractors on DLA Weapons Support ASC projects. The scope of work involves the packaging of seat covers according to ASTM D3951 standards, marking and labeling in compliance with MIL-STD-129, and palletizing shipments per RP001 DLA Packaging Requirements for Procurement. All deliverables must utilize MIL-SPEC packaging materials and compliant labeling systems to ensure items are shipment-ready. The project is a total small business set-aside under NAICS code 561910 and is managed by the Department of Defense for the DLA Weapons Support ASC Supplier Oper AE and AF Div. Performance will take place at Robins Air Force Base. Interested parties must respond by November 16, 2026.

Packaging and Labeling Services

POSTED

about 4 hours ago

DEADLINE

Manufacture of Seat Front Dress CoversThis subcontract opportunity is for the manufacture of 470 Seat Front Dress Covers to support prime contractors on DLA Weapons Support ASC projects. The selected provider will be responsible for cutting and sewing textile materials in strict accordance with NSN 1680-01-277-8953 and RA001 specifications. Quality assurance requirements include performing First Article Testing and zero-based sampling inspections per MIL-STD-1916, and the contractor must maintain compliance with either SAE AS9003 or ISO 9001 standards using industrial sewing equipment. The project is issued by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Div, with performance taking place at Robins Air Force Base. This is a total small business set-aside under NAICS code 314910. Interested parties must submit their responses by November 16, 2026.

Textile Bag and Canvas Mills

POSTED

about 4 hours ago

DEADLINE

Aerospace Grade Raw Material SupplyThis subcontract involves the supply of aerospace-grade raw materials, specifically alloys and metals, for prime contractors working on DLA Weapons Support ASC aerospace projects. All materials must be sourced according to government base drawing specifications and delivered with comprehensive material test reports. The performance of this contract takes place at Robins Air Force Base. The supplier is required to provide Material Certifications and Safety Data Sheets in strict accordance with FED-STD-313 and 29 CFR 1910.1200(g). Additionally, the contractor must maintain full compliance with ITAR and EAR export controls to ensure the secure handling of sensitive aerospace materials.

Fabricated Structural Metal Manufacturing

POSTED

about 4 hours ago

DEADLINE

Machine Thread Plug SupplyThis subcontract involves the supply of 25 machine thread plugs, specifically part number H805-12-SS or an approved equivalent from CPV MFG INC, to support prime contractors under DLA Weapons Support supply contracts. The Department of Defense, through the DLA Weapons Support ASC Supplier Oper AE and AF Div, requires all units to be packaged according to RP001 DLA Packaging Requirements and marked in compliance with MIL-STD-129. The performance of this contract will take place in Phoenix, Arizona. Interested parties must adhere to the response deadline of November 16, 2026, for this requirement categorized under NAICS code 423810.

Construction and Mining (except Oil Well) Machinery and Equipment Merchant Wholesalers

POSTED

about 4 hours ago

DEADLINE

Aerospace Component Finishing and CoatingThe Aerospace Component Finishing and Coating subcontract involves providing specialized surface treatment and coating services for prime contractors supporting DLA Weapons Support ASC projects. The scope of work includes applying anodizing, passivating, or painting to bracket components in strict accordance with technical drawings and the DLA Master List of Technical and Quality Requirements. The contractor is responsible for ensuring that all finish thickness and adhesion meet rigorous military specifications before delivering the finished components. This opportunity is a total small business set-aside under NAICS code 332813, managed by the Department of Defense for the DLA Weapons Support ASC Supplier OE and AF Division. Performance will take place in Portsmouth, New Hampshire. Interested parties must respond by November 16, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 4 hours ago

DEADLINE

Aerospace Grade Raw Material SupplyThis subcontract, titled Aerospace Grade Raw Material Supply, involves the provision of certified raw metals and alloys for prime contractors working on DLA Weapons Support ASC projects. The scope of work requires the delivery of materials that strictly adhere to technical drawings for NSN 1450-01-657-9533, with all shipments delivered directly to the fabricator. Essential documentation must accompany the materials, including Material Test Reports, Certificates of Conformance, and Safety Data Sheets in compliance with Federal Standard No. 313. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, this opportunity is designated as a Total Small Business Set-Aside under FAR 19.5. The project falls under NAICS code 331210 and specifies Portsmouth, 03801-5000, as the place of performance. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 4 hours ago

DEADLINE

Aerospace Grade Raw Material SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division, involves the supply of certified aerospace-grade raw material stock. The scope of work focuses on providing alloy billets or forgings specifically for the production of Linear Actuating Cylinder Heads for prime contractors. Performance for this contract is centered at Tinker AFB. A critical requirement of the agreement is strict adherence to DFARS 252.225-7001 Buy American regulations. To ensure quality and regulatory compliance, all delivered materials must include full traceability and accompanying Mill Test Reports. The opportunity is categorized under NAICS code 331210.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 4 hours ago

DEADLINE

Aerospace Finishing and Coating for Actuating HeadsThis subcontract involves providing specialized aerospace finishing and coating services for Linear Actuating Cylinder Heads to support prime contractors under the DLA Weapons Support ASC. The scope of work requires the application of aerospace-grade plating or anodizing in strict accordance with TDP specifications to ensure necessary corrosion resistance. All delivered components must adhere to ASTM D3951 packaging standards. The project is managed by the Department of Defense and will be performed at Tinker AFB. To be eligible, providers must maintain ISO 9001:2015 certification and ensure full ITAR compliance. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 4 hours ago

DEADLINE

Supply of Plain Round Nuts (NSN 5310010295797)This subcontract involves the supply of 11 aerospace-grade plain round nuts to the Department of Defense, specifically for the DLA Weapons Support ASC Supplier Oper AE and AF Div. The required components must be manufactured or sourced according to Hamilton Sundstrand Corporation part number 727453-3 and NSN 5310010295797. Delivery is designated as FOB Origin to Tinker AFB. The contractor must adhere to strict technical and regulatory standards, including packaging and marking per MIL-STD-2073-1E and MIL-STD-129. Quality control must be maintained in accordance with MIL-STD-1916 or ASQ H1331, and the provider is required to maintain DFARS 252.204-7012 cybersecurity compliance. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS