Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on July 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Aircraft Tool Kit Manufacturing and Assembly

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332312
New
ACE-1199-1386-00 Tower Design and Fabrication for Various RCAG/RTR Sites (ADM, DPA, ONL, and RWF)
Solicitation # ace-1199-1386-00-tower-design-fabrication-various-rcagrtr-sites-adm-dpa-onl-rwf
Parsons Corporation is soliciting bids for the design, fabrication, and delivery of towers for various RCAG/RTR sites located in Oklahoma, Illinois, Nebraska, and Minnesota, specifically serving the ADM, DPA, ONL, and RWF locations. This project falls under NAICS code 332312 and requires that the selected offeror be fully bonded and insured to perform the work. The opportunity is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 2, 2026. The primary point of contact for this solicitation is Thomas Sheehan.
Parsons Corporation

POSTED

about 6 hours ago

DEADLINE

in 5 days
NAICS: 332312
New
DIBBS
NON-NSN ITEM
Solicitation # SPE7M0-27-T-0724
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 12 hours ago

DEADLINE

in 6 days
NAICS: 332312
New
DIBBS
SCREW, CLOSE TOLERANCE
Solicitation # SPE4A6-27-T-7135
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 8 days
NAICS: 332312
New
SLED
Tunnel Liner Plate Material Supplier
Dot084500 Capital Program Administration Dotd8, Dot-dept Of Transportation

POSTED

about 13 hours ago

DEADLINE

in 14 days
NAICS: 332312
New
Federal
Integrated Water Tank and Storage FabricationThis subcontract involves the fabrication and supply of integrated water tank and fuel storage assemblies for prime contractors supporting DLA Troop Support projects. The scope of work requires the manufacture of an insulated potable water tank with a minimum capacity of 80 gallons, featuring an integrated storage rack capable of holding at least five 5-gallon fuel cans. The selected provider is responsible for the delivery of the fully installed assembly. The project is categorized under NAICS code 332312 and will be performed in Natick. Interested parties must adhere to the response deadline of November 4, 2026. This effort is managed under the Department of Defense for the DLA Troop Support agency.
DLA Troop Support

POSTED

about 17 hours ago

DEADLINE

in 7 days
NAICS: 332312
New
Federal
Tactical Chassis FabricationThe Tactical Chassis Fabrication subcontract, issued by the Department of Defense under agency W6QK Acc-Apg, involves the production of lightweight and ruggedized housing and chassis for aircraft interior decontamination projects. These components are designed for the Joint Project Manager for CBRN Special Operations Forces and must be manufactured using composite materials and lightweight alloys. Each enclosure is required to fit within a 42 by 18 by 18 inch envelope and maintain a total weight of 150 pounds or less. To ensure operational viability, all deliverables must adhere to MIL-STD-1472 human engineering and lift requirements, resulting in a transportable chassis with integrated stowage. The project is categorized under NAICS code 332312 and will be performed in Abell. Interested parties must submit their responses by the deadline of November 24, 2026.
W6QK Acc-Apg

POSTED

about 17 hours ago

DEADLINE

in 28 days
NAICS: 332312
New
Federal
Steel and Other Metal Materials for the Marietta Repair Station: Stamford De-Watering Box Material PH 1
Solicitation # W9123727QA011
Solicitation W9123727QA011 is a firm-fixed price commercial supply contract issued by the US Army Corps of Engineers, Huntington District, for the procurement of various steel and metal materials to support the Stamford De-Watering Box project at the Marietta Repair Station in Ohio. This procurement is a 100 percent small business set-aside under NAICS code 332312. The required materials include a wide array of ASTM standard products, specifically ASTM 1018 CR round bars, ASTM A434 CL bc, ASTM A53 seamless pipe, ASTM 1026 seamless tubing, ASTM A36 plates and bars, ASTM A709 Gr 50 plates, T-beams, and flat bars, as well as ASTM A325 fasteners. Specialized fabrication is required for certain ASTM 709 Gr 50 plates, including 1/8 inch tolerances and 45-degree double bevels as specified in the technical drawings. The selected vendor is responsible for arranging shipping to the Marietta Repair Station, with the government handling the unloading of materials upon arrival. All deliveries must be completed within eight weeks of the award date and must be accompanied by traceable mill certifications and testing reports. To be eligible for award, firms must be registered in the System for Award Management and comply with DFARS clauses 252.225-7001 and 252.225-7002 regarding the Buy American and Balance of Payments Program and Qualifying Country Sources as Subcontractors. The contract will be awarded using simplified acquisition procedures, and final invoicing is to be submitted via email once all materials are delivered onsite.
W072 Endist Huntington

POSTED

about 17 hours ago

DEADLINE

in about 15 hours
NAICS: 332312
New
DIBBS
17--HANDRAIL
Solicitation # SPE8EF-27-T-0145
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 17 hours ago

DEADLINE

in 12 days
NAICS: 332312
New
Federal
Environmental Control Work Booth/ Sanding Booth.
Solicitation # FA480027Q0005
FA4800 633 Cons Pkp

POSTED

about 17 hours ago

DEADLINE

in 17 days
NAICS: 332312
New
Federal
Purchase of 2 or 3 Temporary Road Bridges
Solicitation # 12444627Q0004
Csa East 7 Usda-Fs

POSTED

about 17 hours ago

DEADLINE

in 14 days
NAICS: 332312
New
SLED
Steel Embedded Items and Lintel SupplyThis subcontract for Steel Embedded Items and Lintel Supply involves providing essential steel components for Harford County Public Schools facility projects. The selected vendor will be responsible for furnishing and delivering anchor bolts, leveling plates, steel lintels, base plates, bearing plates, sleeves, angles, and channels directly to the jobsite. All supplied materials must strictly comply with the Buy American Steel Act, and the scope of work is limited to supply and delivery, as installation will be handled by other trades. The opportunity is categorized under NAICS code 332312 and is managed by the state of Maryland. Interested parties should note the tight response window, with the solicitation posted on October 26, 2026, and the deadline for responses set for October 29, 2026.
Harford County Public Schools

POSTED

1 day ago

DEADLINE

in 1 day
NAICS: 332312
New
SLED
Miscellaneous Metals and StairsThis subcontract for Miscellaneous Metals and Stairs involves the fabrication and installation of secondary metal elements for prime contractors working on Harford County Public Schools facility projects. The scope of work specifically includes the delivery and installation of metal pan stairs, grating stairs, interior and exterior pipe and tube railings, and various miscellaneous metal supports. A critical requirement for this contract is the provision of a Maryland Professional Engineer for the delegated design of all stairs, handrails, ladders, and guardrails. Interested parties should note the response deadline of October 29, 2026, for this Maryland-based project.
Harford County Public Schools

POSTED

1 day ago

DEADLINE

in 1 day

AI Contract Overview

Show more

The Aircraft Tool Kit Manufacturing and Assembly subcontract, issued by the Department of Defense under agency W6QK Acc-Rsa, involves the design, precision machining, fabrication, and assembly of a specialized aircraft tool kit. The project requires strict adherence to military specifications and encompasses all necessary quality control and packaging processes. This effort is categorized under NAICS code 332312. This opportunity is designated as a Total Small Business Set-Aside in accordance with FAR 19.5. Interested parties must submit their responses by the deadline of August 17, 2026. The solicitation was officially posted on July 14, 2026.

General Info

DoD small business subcontract for aircraft tool kit manufacturing, due August 17, 2026.

Agency

Department Of Defense → W6QK Acc-Rsa

NAICS

332312 - Fabricated Structural Metal Manufacturing

Place of Performance

AL, USA

Set-Aside

SBA

Documents

This scope was carved out of W58RGZ-26-Q-0004_Amendment-0004.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Purchase of Tool Kit, Aircraft

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Rsa
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → W6QK Acc-Rsa
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Design, precision machining, fabrication, and assembly of a specialized aircraft tool kit compliant with military specifications, including quality control and packaging.

More opportunities from Department Of Defense → W6QK Acc-Rsa

Same awarding agency

NAICS: 423840
New
Federal
Aerospace Hardware & Seal SupplyThis small business set-aside subcontract, managed by the Department of Defense agency W6QK Acc-Rsa, involves the supply of aviation-grade seals, gaskets, fasteners, and O-rings for prime contractors working on Department of the Army UH-60 helicopter projects. The provider is responsible for sourcing certified aerospace-grade elastomers and hardware that strictly adhere to OEM specifications and the Buy American Statute. Key deliverables include the provision of certified hardware kits and the implementation of unique item identifiers for embedded subassemblies. The opportunity is categorized under NAICS code 423840, with a response deadline set for December 1, 2026.
Industrial Supplies Merchant Wholesalers

POSTED

about 17 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 811310
New
Federal
Specialized NDT (Non-Destructive Testing) ServicesThis small business set-aside subcontract involves providing specialized non-destructive testing services for Department of the Army UH-60 helicopter projects. The contractor is responsible for detecting cracks, corrosion, and catastrophic damage using ultrasonic equipment and inspection kits through methods such as X-ray, Magnetic Particle, and Dye Penetrant testing. All work must be performed by personnel holding NAS410 or equivalent certification to ensure the delivery of accurate inspection reports and airworthiness certifications. Managed by the Department of Defense under agency W6QK Acc-Rsa, the opportunity falls under NAICS code 811310. Interested parties must submit their responses by the deadline of December 1, 2026.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 17 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332710
New
Federal
Precision Machining & Component FabricationThis subcontract, titled Precision Machining and Component Fabrication, involves the production of replacement parts, brackets, and housings for gearbox radiator assemblies used in Department of the Army UH-60 helicopter projects. The scope of work requires the use of CNC machining, milling, and turning to process aerospace-grade alloys in strict accordance with form, fit, and function technical data. All deliverables must comply with the Buy American Statute to ensure the delivery of qualified machined replacement components. Managed by the Department of Defense under agency W6QK Acc-Rsa, this opportunity is designated as a Total Small Business Set Aside under NAICS code 332710. The solicitation was posted on October 27, 2026, with a response deadline set for December 1, 2026.
Machine Shops

POSTED

about 17 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 811310
New
Federal
Radiator Core & Heat Exchanger RepairThis small business set-aside subcontract, managed by the Department of Defense agency W6QK Acc-Rsa, involves specialized repair, cleaning, and refurbishment of radiator cores and heat exchanger elements. The work supports prime contractors on Department of the Army UH-60 helicopter projects to ensure components meet continued airworthiness standards. Technical requirements include chemical cleaning, pressure leak testing using specialized rigs, brazing, soldering, and fin straightening. The opportunity is categorized under NAICS code 811310 and was posted on October 27, 2026, with a response deadline of December 1, 2026. The selected contractor will be responsible for utilizing industrial cleaning solvents and pressure testing equipment to deliver fully refurbished heat exchangers and radiator cores.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 17 hours ago

DEADLINE

in about 1 month
View Details
New
Federal
Pre-Solicitation Synopsis for the Overhaul of the CH-47 Swashplate, Controllable
Solicitation # W58RGZ-27-R-A021

POSTED

about 17 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336413
New
Federal
Amendment 0004 Overhaul of RADIATOR GEARBOX
Solicitation # W58RGZ-26-B-0016
Solicitation W58RGZ-26-B-0016 is a total small business set-aside for the inspection and overhaul of UH-60 radiator gearboxes (NSN 1615-01-158-9514, P/N 70361-03004-103) to ensure continued airworthiness per Army Regulation 70-62. The contract is structured as a five-year Firm-Fixed-Price Indefinite Delivery Indefinite Quantity (IDIQ) agreement. The scope includes the disassembly, inspection, and repair of components, with specific deliverables including overhauled units, scrap management for assets beyond economical repair, and the provision of required containers. Award will be granted to the responsive and responsible bidder offering the lowest total price based on the provided pricing template. Amendment 0004 extends the proposal submission deadline to November 30, 2026, at 5:00 PM CST, due to the discontinuation of PADDS. Eligible bidders must be registered in SAM.gov under NAICS code 336413. Key requirements include compliance with ISO 9001:2000 quality standards, CMMC level 2 self-assessment, and strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-130N for item unique identification. Invoicing and receiving reports are managed through the Wide Area WorkFlow (WAWF) system. Performance involves a tiered delivery schedule, with initial Product Verification Audit assets due 60 days after award and subsequent overhauled units delivered at a maximum rate of 12 per month.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541611
New
Federal
Military Plans Specialist Support ServicesThe Military Plans Specialist Support Services subcontract provides operational and strategic planning advisory support for prime contractors on W6QK Acc-Rsa projects located in Jordan. The scope of work involves developing physical security and force protection plans, leading crisis action and deliberate planning through JOPES and APEX, and supporting military exercises using MDMP and JOPP. Key deliverables include the production of formal military orders, executive briefings, and comprehensive force protection strategies. Qualified personnel must possess an active Secret security clearance and maintain CENTCOM theater entry eligibility. This opportunity falls under NAICS code 541611 and is associated with the Department of Defense. Interested parties should note the response deadline of November 4, 2026.
Administrative Management and General Management Consulting Services

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 541611
New
Federal
Military Plans Specialist Support Services
Solicitation # ASGJOCS0011
The Military Plans Specialist Support Services contract, solicitation number ASGJOCS0011, provides operational and strategic planning advisory support to the Area Support Group-Jordan (ASG-J) Operations Directorate (S-3). The contractor is responsible for coordinating and executing operational and contingency plans, exercises, and force protection programs to support United States Army Central (USARCENT) and USCENTCOM entities. Key duties include developing physical security and force protection plans (30%), leading deliberate and crisis action planning using JOPES/APEX (30%), supporting exercises through the Military Decision Making Process and Joint Operational Planning Process (20%), and providing inter-agency representation and staff coordination (20%). Personnel must possess an active Secret security clearance, meet CENTCOM medical and theater entry requirements, and be eligible for overseas travel, with anticipated business travel within the USCENTCOM area of responsibility up to 20% of the time. The position follows a standard civilian non-personal service baseline per FAR 37.104, with a typical work week of Sunday through Thursday and approximately 1,920 productive hours per year. Required expertise includes proficiency in Army regulations regarding Base Operations Support-Integrator (BOS-I), the U.S.-Jordanian Defense Cooperation Agreement, and the ability to author formal military orders and executive briefings. The submission deadline for this sources-sought effort is November 4, 2026.
Administrative Management and General Management Consulting Services

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
Federal
Supply of Anchor Plate, Wire RThis small business set-aside subcontract, issued by the Department of Defense agency W6QK Acc-Rsa, requires the manufacture and supply of 254 specialized Wire R anchor plates, part number 10252128-39. The project is designated for prime contractors supporting defense procurement and will be performed at Fort Bliss, Texas. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073-1, MIL-STD-129, and MIL-STD-130, while ensuring all wood materials are ISPM 15 compliant. Mandatory qualifications include ANSI/ISO/ASQ 9001:2015 or AS 9100 certification and access to the Joint Certification Program. Responses for this opportunity are due by December 2, 2026.
Hardware Manufacturing

POSTED

7 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332510
New
Federal
Anchor Plate, Wire R
Solicitation # W31P4Q27RA011
Solicitation W31P4Q27RA011 is a 100% small business set-aside for a firm fixed price, one-time buy contract to manufacture 254 units of Anchor Plate, Wire R, part number 10252128-39, under NAICS code 332510. The procurement is managed by the Department of Defense for the M-D6 weapon system, with delivery set for Fort Bliss, Texas, on a FOB Destination basis. Award will be granted to the responsive and responsible offeror representing the lowest overall cost to the government. Eligible vendors must maintain an active certification in the Joint Certification Program to request necessary drawings from the contracting office. The contractor is required to adhere to high-level quality standards, specifically ANSI/ISO/ASQ 9001:2015 or AS 9100. Strict compliance is required for packaging and marking per MIL-STD-2073-1, MIL-STD-129, and MIL-STD-130, including the use of ISPM 15 compliant wood packaging materials. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
Hardware Manufacturing

POSTED

7 days ago

DEADLINE

in about 1 month
View Details
NAICS: 336412
Federal
Sources Sought for Overhaul/Repair/Upgrade of the UH-60/AH-64 T700 Turbine Engine Supervisory Control Unit
Solicitation # W58RGZ-27-R-A016
This sources sought announcement is issued by the Department of Defense to conduct market research for the overhaul, repair, and upgrade of Turbine Engine Supervisory Control Units. The requirement covers a quantity range between 150 and 1,860 units, which includes 310 units designated for Foreign Military Sales. The effort falls under NAICS code 336412 with a size standard of 1,500 employees. While Triumph Engine Control Systems, LLC is currently the only known approved source, the government is seeking to identify other potential capable sources to determine the feasibility of a competitive acquisition. Interested parties must submit their company name, business size, socio-economic status, and detailed point of contact information to the designated contract specialist. This notice is for planning purposes only and does not constitute a request for proposal or a commitment from the government. Because a Depot Maintenance Work Requirement is unavailable, contractors are encouraged to pursue Source Approval Requests to become an approved provider. All responses must be submitted electronically by the specified deadline.
Aircraft Engine and Engine Parts Manufacturing

POSTED

8 days ago

DEADLINE

in 8 days
View Details
NAICS: 339999
Federal
DoD Unique Identification (UID) MarkingThis subcontract involves the permanent marking of compressor units for prime contractors supporting US Army Aviation and Missiles Command projects. The scope of work requires the use of industrial laser marking systems to perform laser etching or tagging of components, ensuring full traceability and compliance with DFARS 252.211-7003. The final deliverables must be units featuring verified, scannable Department of Defense unique identification marks. Managed by the Department of Defense agency W6QK Acc-Rsa, the work is to be performed at Fort Bliss, Texas. The opportunity was posted on October 15, 2026, with a response deadline of November 26, 2026. The project falls under NAICS code 339999.
All Other Miscellaneous Manufacturing

POSTED

13 days ago

DEADLINE

in 30 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332312
Closed
Federal
Structural Steel Fabrication and Installation
Csa Southwest 6 Usda-Fs

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 332312
Closed
DIBBS
Carbon Steel Structural Angle Manufacturing
Defense Logistics Agency

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 332312
Closed
DIBBS
Domestic Material Sourcing and Supply Chain Compliance
ASC SUPPLIER OPER AE AND AF DIV

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 332312
DIBBS
Precision Tube Elbow Manufacturing
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 332312
Closed
DIBBS
Supply of Self-Locking Flare-Type Nuts (NSN 5310-01-053-9998)
ASC COMMODITIES DIVISION

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 332312
DIBBS
Structural Steel Fabrication and Erection
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 332312
DIBBS
Vehicle Boarding Ladder Supply and Manufacturing
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 332312
DIBBS
Supply of Marine-Grade Metal Door (NSN 2040013532282)
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 332312
Closed
DIBBS
Domestic-Sourced Fastener Manufacturing (Buy American / Berry Amendment Compliance)
ASC COMMODITIES DIVISION

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 332312
Closed
DIBBS
Supply of Plain Round Nuts (NSN 5310016165007)
ASC COMMODITIES DIVISION

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 332312
DIBBS
Manufacture of Structural Support Components
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 332312
Closed
DIBBS
Manufacture of Structural Aluminum Plates (NSN: 1560-01-081-4116)
ASC SUPPLIER OPER AE AND AF DIV

POSTED

4 months ago

CLOSED

3 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS