Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

ALARM, AUDIBLE-VISUA

Active
SPE4A6-26-T-11ZUFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of an audible-visual alarm system identified by NSN 6350-01-528-5837 and part number N1546, with a quantity of 11 units to be delivered FOB origin within 171 days of contract award. All packaging must conform to MIL-STD-2073-1E, including specific preservation methods, materials, and unit container codes, while marking must adhere to MIL-STD-129 with no special marking required. The item is subject to DLA’s master list of technical and quality requirements, which incorporates sampling standards such as MIL-STD-1916 or ASQ H1331, mandating zero nonconformances in sampling unless otherwise specified. Critical, major, and minor attributes must be verified at levels VII, IV, and II, or with AQLs of 0.1, 1.0, and 4.0 respectively. The delivery destination is the DLA Distribution San Joaquin warehouse in Tracy, California, with freight and parcel post addresses aligned. The contract enforces strict quantity adherence with zero variance tolerance and specifies inspection and acceptance occurring at destination. The solicitation, issued under SPE4A6-26-T-11ZU, was posted on August 4, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 335311. The point of contact is Ernest Penrose of the ASC Commodities Division, Department of Defense.

General Info

11 audible-visual alarm systems delivered FOB origin to Tracy, CA within 171 days, compliant with MIL-STDs and zero tolerance.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335311 - Power, Distribution, and Specialty Transformer ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-11ZU.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Ernest Penrose
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ALARM,AUDIBLE-VISUA
ALARM,AUDIBLE-VISUAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CONSILIUM MARINE US INC 3EGT0 P/N N1546
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017740482 0001 EA 11.000
NSN/MATERIAL:6350015285837
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
SPE4A6-26-T-11ZU
SECTION B
PR: 7017740482 PRLI: 0001 CONT’D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:01/31/2027 Original Required Delivery Date:01/31/2027
SPE4A6-26-T-11ZU NSN/Part Number: 6350-01-528-5837 Quantity: 11 EA Purchase Request: 7017740482QTY: 11 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335311
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A6-26-T-12HY
The contract pertains to the procurement of five branched wiring harnesses identified by NSN 0001S00000053 under solicitation SPE4A6-26-T-12HY, with a delivery deadline of 381 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on contract size. The item is subject to stringent quality standards including ISO 9001:2015, physical marking requirements, and inspection and acceptance at origin. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise stipulated, with attribute classifications assigned specific verification levels or AQLs. The contractor must be certified at Cybersecurity Maturity Model Certification Level 2 by an accredited third-party assessor and adhere to DLA packaging standards. Export control restrictions apply as the technical data is subject to ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, and only contractors with approved JCP certification, completed DOD export training, and DLA authorization may access the data. The place of performance is New Cumberland, PA, with primary point of contact Victoria Burcham, and the contract falls under NAICS code 335311 for electrical equipment manufacturing.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
LEAD, ELECTRICAL
Solicitation # SPE4A6-26-T-12EH
This contract pertains to the procurement of LEAD, ELECTRICAL, identified by NSN 6150017023231 and part number M83413/8-G016BC, with a total quantity of 215 units delivered under solicitation SPE4A6-26-T-12EH. The item must comply with technical and quality requirements referenced in the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, TABLE 1, with zero non-conformances mandated unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The delivery is FOB origin, with inspection and acceptance occurring at destination, and the required delivery window is 158 days from the order, with an original deadline of June 23, 2027. Packaging must adhere to DLA’s procurement guidelines, with unit containment designated as E5 and palletization governed by RP001. The consignee is DLA Distribution at the New Cumberland, PA facility, and transportation instructions reference DLAD Proc Notes C19 and C20. The contract specifies a unit price of $215.00, with no variance permitted in quantity, and the supplier must meet the need ship date of August 4, 2026. The NAICS code is 335311, and the contracting officer is Ashley Sheppard of the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
TRANSFORMER, POWER
Solicitation # SPE7M1-26-T-248K
The contract is for the procurement of a transformer, power, identified by NSN 5950000818787 and part number 9100-0342 from Keysight Technologies Inc, with a quantity of 30 units, each priced at $30.00, totaling $900.00. Delivery is required within 20 days from the contract award, FOB origin, with no variance allowed in quantity. Inspection and acceptance both occur at the destination, and all packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951. Packaging must meet MIL-STD-129 labeling standards, and if the item is classified as hazardous under FED-STD-313, it must follow TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable. The item is to be palletized according to RP001 standards, and the Unit of Issue is EA with a Quantity per Unit Pack of 001. Shipping instructions direct delivery to the Distribution Management Office at Camp Kinser, Japan, with the marked-for address identical to the shipping address. Transportation guidelines reference DLAD Proc Note C19 for general freight and C20 for first destination. The original required delivery date is July 31, 2026, and the contract is issued under solicitation SPE7M1-26-T-248K, with the NAICS code 335311 and managed by the Department of Defense’s Maritime Supply Chain. The point of contact is Ryan Snyder, with email and phone details provided for inquiries.
MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335311
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A6-26-T-12FM
The contract is for a branched wiring harness identified by NSN 0001S00000053, with a quantity of 13 units, under purchase request 7017740968QTY. Delivery is required within 261 days after award, and the solicitation number is SPE4A6-26-T-12FM, issued on August 4, 2026, with responses due by August 12, 2026. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is subject to export control under ITAR or EAR regulations, restricting any disclosure of technical data to foreign persons, regardless of location, and compliance with DFARS 252.225-7048 is mandatory. Access to this controlled data is limited to contractors with active US/Canada Joint Certification Program status, completed mandatory training on handling DOD export-controlled data, and formal approval from the DLA controlling authority. Packaging must adhere to DLA standards, inspection and acceptance occur at origin, and unauthorized government identification must be removed from non-accepted supplies. The place of performance is New Cumberland, Pennsylvania, with the contracting office under the Department of Defense’s ASC Commodities Division, and primary point of contact is Thanh Hue Nguyen.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
ALARM ASSEMBLY
Solicitation # SPE4A6-26-T-11TU
The contract pertains to the procurement of two Alarm Assembly units under solicitation SPE4A6-26-T-11TU, with a delivery deadline of 171 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions determined by the solicitation or award date depending on acquisition size. Inspection and acceptance must occur at origin, and non-accepted supplies must have all government identification removed. Sampling must comply with MIL-STD-1916 or ASQ H1331, Table 1, or another zero-based sampling plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Zero non-conformances are required in samples unless otherwise stated. The assembly must not contain intentionally added mercury or mercury compounds, except in specified functional components such as batteries, fluorescent lamps, instruments, controls, weapon systems, or NAVSEA-approved chemical reagents; portable lamps and instruments with mercury must be shockproof and include a secondary containment boundary per NAVSEA 5100-003D. The supplier must be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified by an accredited C3PAO. Physical identification of items must be clearly marked, and all technical data associated with the item is subject to export control under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons or entities. Access to such data is restricted to contractors with approved JCP certification, validated training on handling DOD export-controlled data, and explicit DLA approval. The NSN is 6350-01-081-7234, and the purchase request number is 7017739843.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
POWER SUPPLY
Solicitation # SPE7M1-26-T-248X
This contract requires the delivery of one power supply unit with NSN 6120-01-624-4579 under solicitation SPE7M1-26-T-248X, with a firm delivery deadline of 20 days from award and FOB origin terms. The item must comply with stringent environmental and material restrictions: Class I ozone-depleting chemicals are strictly prohibited, and any substitute chemicals must be pre-approved unless explicitly authorized by specification. Mercury and mercury-containing compounds are banned from direct contact with the hardware except for specific exempted applications such as functional batteries, fluorescent lights, sensors, weapon systems, or Navsea-specified reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment barrier as mandated by NAVSEA 5100-003D. All packaging must adhere to ASTM D3951 and MIL-STD-129 standards, with palletization conforming to DLA’s RP001 requirements, and the Unit of Issue and Quantity per Unit Pack must match the contract exactly. Technical and quality requirements referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications. The unit is to be shipped to MCAS Futenma, Okinawa, Japan, with all shipping and transportation protocols governed by DLAD PROC Notes C19 and C20. The required delivery date is July 31, 2026, with no variance permitted in quantity.
MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-12BY
This contract is for a single unit of a special-purpose electrical cable assembly identified by NSN 6150-01-605-0227, with delivery due in 231 days after order. The procurement is governed by stringent technical and quality requirements sourced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have all government identification removed prior to return. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 standards with zero non-conformances required unless otherwise contracted; critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to authorized personnel only. Export compliance requires DLA contractors to hold US/Canada Joint Certification Program certification, complete mandatory DOD export-control training, and pass a DLA questionnaire. The solicitation was issued August 4, 2026, with responses due by August 12, 2026, under contract number SPE4A6-26-T-12BY, with performance occurring in New Cumberland, Pennsylvania, and primary point of contact being Kory Walker of the Defense Logistics Agency’s Commodity Division.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
WIRING HARNESS, BRAN
Solicitation # SPE4A5-26-T-326B
The contract pertains to the procurement of a wiring harness identified as P/N 901-076-712-113 with NSN 6150-01-662-4946, supplied by Bell Textron Inc, under solicitation SPE4A5-26-T-326B. Five units are required with strict delivery terms: delivery must occur within 171 days from award, shipped FOB origin with no quantity variance permitted, and inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including specific methods for preservation, wrapping, and containerization, with marking conforming to MIL-STD-129 and no special markings required. The item is designated as a critical application item and must meet tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers, including removal of government identification from non-accepted supplies. Sampling and inspection shall follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, with attributes assigned verification levels or AQLs as defined. The contract incorporates technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and requires compliance with CMMC Level 2 Self-Assessment for cybersecurity. Item Unique Identification is not mandated per customer request under DFARS 252.211-7003(c)(1)(i). Delivery is to the DLA Distribution facility at New Cumberland, Pennsylvania, with the original required delivery date set for April 26, 2029, though a need ship date of January 31, 2027, indicates urgency. Transportation and freight details follow DLAD procedural notes C19 and C20. The contract specifies the unit of issue as each (EA), and all documentation must adhere to the version of the DLA Master List in effect on the solicitation issue date. Point of contact for the contract is Kay Bates of the Department of Defense’s ASC Supplier Oper OEM Division, with responses due by August 12, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
LEAD, STORAGE BATTERY
Solicitation # SPE4A6-26-T-12KE
This contract pertains to the procurement of a lead storage battery designated as a critical application item with part number 400/L9909 and NSN 6150016754326, requiring strict adherence to source-controlled manufacturing and testing procedures governed by limited rights data that only qualified vendors with direct access or traceability to approved sources may use. The item must be produced and inspected in compliance with technical and quality requirements referenced in the DLA Master List, and suppliers seeking source approval must submit a SAR package. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special marking required. The battery is to be delivered FOB origin within 171 days, with no variance allowed in quantity, and inspected and accepted at the destination. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation procedures must comply with DLAD Proc Notes C19 and C20. The contract specifies a unit price of $13.00 per unit for a total of 13 units, with a required ship date of January 31, 2027, and original delivery date of June 21, 2027 under solicitation SPE4A6-26-T-12KE.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-12DN
The contract pertains to the procurement of a cable assembly identified as EP-0030499 with NSN 6150016915627, classified as a critical application item, under solicitation SPE4A6-26-T-12DN. Three units are required to be delivered FOB origin within 171 days of contract award, with no variance allowed in quantity. All items must comply with stringent technical and quality requirements referenced from the DLA Master List, including inspection and acceptance at origin, adherence to MIL-STD-2073-1E packaging standards, and marking in accordance with MIL-STD-129 without special marking codes. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. Packaging, palletization, and documentation conform to DLA-specific requirements including RP001 and RC001 for source approval, with all submissions governed by the DLA Master List revision in effect on the solicitation issue date. The delivery destination is the DLA Distribution San Joaquin receipt warehouse in Tracy, California, and the required ship date is January 31, 2027, with the original delivery deadline set for May 26, 2027. Transportation protocols are governed by DLAD procedural notes C19 and C20, and the item falls under NAICS code 335311 for electrical equipment manufacturing.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A5-26-T-327C
This contract pertains to the procurement of a cable assembly under solicitation SPE4A5-26-T-327C, requiring four units with a unique NSN of 6150-01-659-2642 and part number 475929 from KIDDE TECHNOLOGIES INC. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with controls determined by the solicitation or award date depending on acquisition size. The item is excluded from Unit Unique Identification per DFARS 252.211-7003(c)(1)(i) and has no shelf life constraint. Packaging must comply with ASTM D3951, but is ultimately subordinate to DLA packaging standards and MIL-STD-129 for marking and labeling, with palletization strictly adhering to RP001 requirements. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling protocols tied to MIL-STD-1916 or ASQ H1331, and a default designation of major attributes absent specific classification. The delivery schedule mandates shipment within 171 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no variance permitted in quantity. Full compliance with DLA’s transportation directives, including PROC NOTE C19 for in-transit logistics and C20 for first destination, is required. Cybersecurity requirements mandate a CMMC Level 2 self-assessment. The unit of issue is each (EA), priced at $4.00 per unit for a total contract value of $16. The original required delivery date is March 20, 2028, with a need ship date of January 31, 2027. The contract reflects federal procurement procedures under NAICS 335311, administered by the Department of Defense’s ASC Supplier OEM Division, with Anthony Nickens designated as the point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, POWE
Solicitation # SPE4A6-26-T-12ET
The contract specifies the procurement of ten power cable assemblies with the NSN 6150-01-648-8144 under solicitation SPE4A6-26-T-12ET, with a delivery deadline of 231 days from award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date or award date, depending on the acquisition size. Packaging must adhere to DLA standards, and all items must be physically marked per RQ017, with government identification removed from non-accepted supplies as mandated by RQ011. Inspection and acceptance must occur at the manufacturer’s origin per RQ009, and sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, with attributes classified as critical, major, or minor and assigned corresponding verification levels or AQLs. Export control is strictly enforced due to technical data subject to ITAR or EAR, prohibiting any disclosure to foreign persons, including foreign nationals in the U.S., and requiring contractors to hold a valid US/Canada Joint Certification Program certification, complete mandatory DOD training, and receive DLA approval prior to accessing controlled data under DFARS 252.225-7048. The point of contact for inquiries is Marcita Robinson, and the place of performance is New Cumberland, Pennsylvania, with the procurement managed by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332312
New
DIBBS
Supply of Fasteners (NSN 5307-01-212-4400)The contract pertains to the manufacture or supply of standardized fasteners identified by NSN 5307-01-212-4400, specifically for integration into defense systems. As a commercial item procurement, it mandates strict adherence to military specifications and federal supply chain standards to ensure compatibility, reliability, and interoperability within military equipment. The item falls under NAICS code 332312, classifying it as a manufacturing activity related to screw, bolt, and fastener production, and is being procured under a subcontract mechanism by the ASC Commodities Division of the Department of Defense. The solicitation was posted on August 4, 2026, with a response deadline of August 18, 2026, providing vendors with a two-week window to submit proposals. While no specific place of performance or point of contact is detailed, the procurement is governed by the Defense Logistics Agency’s procurement framework, as indicated by the official DIBBS portal link. All suppliers must meet the defense sector’s quality, documentation, and delivery requirements without any set-aside provisions for small or disadvantaged businesses, emphasizing a competitive, open-market approach aligned with DoD supply chain objectives.
Fabricated Structural Metal Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and Assessment SupportThe contract entails providing comprehensive cybersecurity compliance support to ensure adherence to NIST Special Publication 800-171 requirements, with a focus on conducting system assessments, developing detailed documentation, and performing thorough gap analyses to identify and remediate security deficiencies. The work involves close coordination with Department of Defense assessors to facilitate Medium or High level evaluations, ensuring systems meet the stringent security controls mandated for handling controlled unclassified information. The contractor is expected to deliver actionable insights and verified compliance evidence to support successful DoD accreditation and audit readiness. This subcontract falls under NAICS code 541512 for computer systems design services and is issued by the ASC Commodities Division of the Department of Defense. The solicitation was posted on August 4, 2026, with responses due by September 4, 2026. Performance location details are not specified, and no set-aside status is indicated. The contract is accessible through the DIBBS platform under solicitation number SPE4A626R0192, and all work must align with the Department of Defense’s cybersecurity framework and evaluation protocols.
Computer Systems Design Services

POSTED

about 5 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541611
New
DIBBS
Supply Chain Traceability and Documentation ManagementThe contract requires comprehensive maintenance and management of full supply chain traceability documentation for CSI components, ensuring adherence to DFARS C03 requirements. This includes rigorous lot and serial number tracking, accurate CAGE code verification, and the retention of complete material certifications to guarantee authenticity and compliance throughout the supply chain. All activities must align with Department of Defense standards for defense-related component sourcing and documentation integrity. The contract is categorized as a subcontract under NAICS code 541611 and is issued by the ASC Commodities Division under the Department of Defense. The solicitation was posted on August 4, 2026, with a response deadline of September 4, 2026. Although specific performance location and point of contact details are not provided, the requirement is clear in its focus on end-to-end traceability and documentation control to meet federal defense contracting compliance mandates.
Administrative Management and General Management Consulting Services

POSTED

about 5 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) and Production Lot Testing (PLT) ServicesThe contract requires the performance of First Article Testing and Production Lot Testing for a CSI item, encompassing the full scope of test execution, detailed documentation, and submission of results to government authorities. All testing activities must adhere to specified technical and procedural standards to ensure compliance with defense requirements, with deliverables including comprehensive reports and certified records for governmental review. The work is classified as a subcontract under NAICS code 541380, indicating it falls within the professional, scientific, and technical services sector, and is managed by the ASC Commodities Division under the Department of Defense. Responses to this solicitation must be submitted by September 4, 2026, with no set-aside designation specified, meaning it is open to all eligible contractors regardless of size or status. The place of performance and exact office address are not provided, but the work is tied to the Department of Defense’s procurement ecosystem, and all submissions must be made through the designated DIBBS portal. The contract does not include point of contact details, implying that all inquiries and submissions should follow standard DIBBS procedures for the referenced solicitation number SPE4A626R0192.
Testing Laboratories and Services

POSTED

about 5 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
Manufacturing and Supply of Critical Safety Item (CSI)The contract requires the manufacture, packaging, and delivery of a Critical Safety Item designated as Lot/Item 5306-011653304 under military specifications, with strict adherence to traceability protocols and predefined CLIN quantities. All work must meet stringent quality and compliance standards expected for defense-critical components, ensuring the item's reliability and safety in operational use. The subcontract is issued by the ASC Commodities Division under the Department of Defense, with a response deadline of September 4, 2026, and a NAICS code of 332722 indicating the scope falls within secondary metal manufacturing. Performance location details are not specified, but the delivery must align with Air Force requirements for logistics and acceptance. The solicitation was posted on August 4, 2026, and all participants must comply with traceability, documentation, and inspection criteria mandated for military-grade safety items.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-12LQ
This contract pertains to the procurement of retaining rings identified by NSN 5325-01-269-2248, with a quantity of 290 units to be delivered FOB origin within 171 days. The requirement is governed by stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with packaging and marking mandated to comply with MIL-STD-2073-1E and MIL-STD-129. Packaging must adhere to DLA-specific guidelines, including prohibited use of mercury or mercury-containing compounds in preservation, packaging, and marking, except for enumerated functional applications such as batteries, fluorescent lamps, and approved instruments, which must additionally feature shock-proof design and a secondary containment barrier in accordance with NAVSEA 5100-003D. The contract explicitly prohibits the intentional introduction of mercury into any supplied hardware. Delivery is to be made to the DLA Distribution San Joaquin receiving warehouse in Tracy, California, with no variance permitted in quantity. The item is flagged as a critical application, and documentation for source approval must meet specified requirements. The solicitation was issued under contract number SPE4A6-26-T-12LQ with a response deadline in August 2026, and the primary point of contact is Marchello Fields from the ASC Commodities Division.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-11PM
This contract specifies the procurement of 3,776 machine screws identified by NSN 5305-00-054-5636 and part number MS51957-2, manufactured to the current revision of MIL-STD or industry consensus standards, with all items produced after the solicitation date required to meet the latest version of the governing specification. The items are classified as commercial and subject to tailored quality requirements including inspection and acceptance at origin, with zero non-conformances mandated in sampling under MIL-STD-1916 or equivalent zero-based plans. Critical attributes are verified at the highest level, and unspecified features are treated as major. The screws must not contain or come in direct contact with mercury or mercury compounds except under specific exemptions for functional components like batteries or sensors, and portable devices containing mercury must have shock-proof design and secondary containment as per NAVSEA 5100-003D. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with preservation methods including drying and protective materials, and marking adhering strictly to MIL-STD-129 without special codes. Mercury is prohibited in preservation and packing materials. Items are to be delivered FOB origin in 146 days to Warner Robins AFB, Georgia, with no tolerance for quantity variance. The supplier must ensure physical identification is applied per MIL-STD-130N, and all hardware must be traceable with manufacturer logos, lot numbers, and material markings. Transportation and shipping instructions reference DLA procedural notes, and all contractual requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-11RF
This contract pertains to the procurement of a quick-release pin identified by NSN 5315-00-575-5740, with a required quantity of 184 units to be delivered FOB origin within 171 days, with no variance allowed in quantity. All items must conform strictly to the current revision of the part standard SPE4A6-26-T-11RF Section B, and previous revisions are only acceptable for hardware manufactured prior to the solicitation date. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures adhering to MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The item is classified as a critical application and must undergo inspection and acceptance at the manufacturer’s origin. Mercury and mercury-containing compounds are prohibited unless essential for functional components such as batteries, fluorescent lamps, sensors, or weapon systems, and where used, portable devices must include a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Palletization follows DLA packaging standards, and delivery is directed to DLA Distribution San Joaquin in Tracy, California. The contract enforces full compliance with defined standards, prohibits intentional contamination with hazardous substances, and mandates original delivery by January 31, 2027, despite the original required date of December 17, 2026.
Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING SE
Solicitation # SPE4A6-26-T-11ZR
The contract specifies the procurement of an Electrical Insulation Sleving Set with part number LNCL-12-140-CK-N and NSN 5970015164430, quantity of 60 kit units, under solicitation SPE4A6-26-T-11ZR. The item is subject to stringent technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements, including mandatory Item Unique Identification (IUID) in compliance with MIL-STD-130, and must be packaged and marked per MIL-STD-2073-1E and MIL-STD-129 with special shelf life marking code 32. The item is classified as a Critical Application Item with a non-extendable shelf life of 60 months, requiring strict adherence to preservation and packaging standards. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the item or its packaging, except for functional uses in batteries, lamps, or instruments as specifically authorized by NAVSEA. Sampling must follow MIL-STD-1916 or a comparable zero-based plan, with zero non-conformances required unless otherwise stated. The item must be procured in lengths divisible by 10 feet and delivered FOB origin within 171 days to the DLA Distribution facility in New Cumberland, PA, with a delivery deadline of January 31, 2027, despite the original required date being May 5, 2028. No quantity variance is permitted, and inspection and acceptance occur at destination, with all documentation and compliance governed by DFARS and DLA procedural notes.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A6-26-T-12FD
The contract pertains to the procurement of seven radio frequency cable assemblies with the NSN 0001S00000061, issued under solicitation SPE4A6-26-T-12FD with a response deadline of August 12, 2026, and a delivery requirement 261 days after award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the size of the acquisition. Packaging, identification, and removal of government markings from non-accepted items must comply with specific DLA directives, including RQ011 and RP001. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification of the item must conform to RQ017, and source approval documentation must adhere to RC001. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; access is limited to contractors with approved US/Canada Joint Certification Program certification, completed DLA training, and formal authorization. The place of performance is Greensboro, North Carolina, and primary point of contact is Traci Beaudoin at DLA.
Other Electronic Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-T-11TF
The contract is for 158 units of socket head cap screws with NSN 5305-01-032-9232, issued under solicitation SPE4A6-26-T-11TF by the Department of Defense’s ASC Commodities Division. The unit of issue is each (EA), with a fixed unit price and total price based on the documented quantity; no variance is permitted in the delivered quantity. Delivery is required within 217 days of award, with FOB origin terms meaning the contractor assumes responsibility for shipment from the point of origin. Inspection and acceptance both occur at the destination warehouse located at 25600 S Chrisman Road, Tracy, CA 95304-5000. Packaging must comply with MIL-STD-2073-1E, including preservation method 10, dry climate conditions, and no mercury or mercury compounds permitted in any packaging materials. Marking must adhere to MIL-STD-129 with no special marking required, and palletization must follow DLA’s RP001 packaging standards. The parcel post and freight shipping addresses are identical, directing delivery to Recipient Warehouse 57. The original required delivery date is April 7, 2027, with a need ship date of March 18, 2027. Transportation instructions reference DLA procedural notes C19 and C20. The contract was posted on August 4, 2026, with responses due by August 12, 2026, and is classified under NAICS 332722 for machinery manufacturing. Primary point of contact is Lisa Harvie, reachable via phone or email provided.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-11PN
The contract is for the procurement of 820 retaining rings identified by NSN 5325-00-187-9033 under solicitation SPE4A6-26-T-11PN, classified as a commercial item and procured through a fully competitive process. The item must comply with the current revision of its defining military or consensus non-government part standard, with prior versions accepted only for hardware manufactured before the solicitation date. Quality assurance requirements are governed by MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Sampling must result in zero non-conformances unless otherwise allowed by the contract, and manufacturers may choose between attribute or variable inspection methods under MIL-STD-1916. The item is subject to DLA’s master list of technical and quality requirements, with revisions controlled by the solicitation issue date for simplified acquisitions. Identification marking must adhere to MIL-STD-130N dated 16 November 2012, and government identification must be removed from non-accepted supplies. Delivery is due within 171 days of award, with performance at Hill AFB, Utah, and the primary point of contact is Carl Younce at DLA.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details