ALMM SHEET .063X 48X 1

ALMM SHEET .063X 48X 144 2024-T3 25 MRS
ALMM SHEET .063X 48X 144 2024-T3 25 MRSIN ACCORDANCE WITH SPEC: AMS-QQ-A-250/5 REV CPART
NUMBER: .063X48X1442024-T3250/5DIMENSIONS: .063 X 48 X 144NOTES: MUST BE PACKED TO PREVENT DAMAGE
DURING SHIPMENT, CERTIFICATE OFQUALITY CONFORMANCE IS REQUIRED. MUST BE MRSRP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENTRA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THEDLA MASTER LIST OF TECHNICAL AND
QUALITY REQUIREMENTS FOUND ON THE WEBAT:http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspxFOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THESOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGEACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATEAPPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ONREVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.SAMPLING:THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQH1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISESPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJORAND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OFVII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIEDATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARESPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURERMAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION ORPER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOTSIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOTUNLESS OTHERWISE SPECIFIED IN THE CONTRACT. RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKINGMetal Certification Contract Data Requirements Lists (CDRLs), DD Form1423s, apply to this procurement. Review the Technical Data Package(TDP) for additional information. If CDRL-METALSCERT is missing fromDLA Technical Data Management Transformation (TDMT) they can also beviewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTSFOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspxTHIS http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspxTHIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENTALMM SHEET .063X 48X 144 2024-T3 25 MRS IN ACCORDANCE WITH SPEC: AMS-QQ-A-250/5 REV C PART NUMBER: .063X48X1442024-T3250/5 DIMENSIONS: .063 X 48 X 144 NOTES: MUST BE PACKED TO PREVENT DAMAGE DURING SHIPMENT, CERTIFICATE OF QUALITY CONFORMANCE IS REQUIRED. MUST BE MRS RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form
SPEFA5-27-T-0124
SECTION B
1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
TDP Rev A Gen 1 IAW BASIC NON GOVT STD SAE AMS-QQ-A-250/5C REVISION NR C DTD 05/01/2021 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE QAP 13873 CDRL-METALSCERT-26033 REVISION NR DTD 12/04/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018059034 0001 IN 288.000
NSN/MATERIAL:9535LLNCPA661
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 10% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N65923
FLEET READINESS CENTER EAST
PSC 8021
SPEFA5-27-T-0124
SECTION B
PR: 7018059034 PRLI: 0001 CONT’D
MCAS
CHERRY POINT NC 28533-0021
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N65923
DLA/FLEET READINESS CENTER EAST
BLDG 148 BAY C
BEACHEY ROAD
CHERRY POINT NC 28533-5040
US
M/F: (TCN) N659236238A061
RDD: 238
PROJ: 705 TP 1
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0D DIST: 9B ADV: 2N FC: PC
Need Ship Date:00/00/0000 Original Required Delivery Date:08/31/2026
SPEFA5-27-T-0124 NSN/Part Number: 9535-LL-NCP-A661 Quantity: 288 IN Purchase Request: 7018059034QTY: 288 Delivery: 5 days ADO