Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Alternate Source Qualification Support (Engineering & Technical Data)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires engineering support and the development of comprehensive technical data packages to facilitate alternate source qualification for the BARREL ASSEMBLY under NAVAIR TDR 24-10048A. This effort involves producing detailed engineering drawings, defining test procedures, and compiling all necessary compliance documentation to demonstrate that new manufacturers can meet the required technical and quality standards for this critical component. The work is essential to ensuring supply chain resilience by certifying additional qualified sources without compromising performance or safety. This subcontract falls under NAICS code 541330 for engineering services and is managed by the Navy Supply Systems Command Weapon Systems Support under the Department of Defense. The task is performance-based and focused on delivering precise technical deliverables that align with military specifications. Although the place of performance and point of contact are not specified, the scope demands close coordination with naval aviation standards and regulatory frameworks to ensure full conformity and certification readiness for the alternate suppliers.

General Info

Engineering support and technical data packages to qualify alternate suppliers for BARREL ASSEMBLY per NAVAIR standards.

Agency

Department Of Defense → Navsup Weapon Systems SupportView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of N0038324RC553.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

17--BARREL ASSEMBLY,AIR

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJun 9

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Navsup Weapon Systems Support

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide engineering support and develop technical data packages for manufacturers seeking alternate source qualification of the BARREL ASSEMBLY under NAVAIR TDR 24-10048A. Work includes drawings, test procedures, and compliance documentation.

Similar Contracts

Same NAICS industry code

Scattergood GS. Units 1&2 Green Hydrogen-Reaady Modernization

Solicitation # scattergood-gs-units-12-green-hydrogen-reaady-modernization

Kiewit Infrastructure West Co. is seeking sub-quotes for the Scattergood GS Units 1 and 2 Green Hydrogen-Ready Modernization project for the City of Los Angeles Department of Water and Power. The scope of work is extensive, encompassing professional and technical services such as civil, structural, mechanical, electrical, and instrumentation and controls engineering, as well as utility locating, geotechnical and geophysical investigations, BIM/3D modeling, and environmental assessments. Additional requirements include hazardous materials surveys, permitting support, and CPM scheduling. Interested firms must contact Kiewit to receive an Invitation to Bid via the Building Connected system, with a bid date of September 11, 2026, and a response deadline of September 30, 2026. Eligible bidders include Disadvantaged, Minority, Women, and Other Business Enterprises, provided they hold certifications from recognized agencies such as the SBA or MBDA. Responsive bidders must possess a valid California Contractor's license and provide acceptable insurance. Subcontractors and material contractors are required to provide bonding for 100 percent of their contract value, though Kiewit will reimburse the associated bond premiums. Furthermore, Kiewit, as a signatory to various collective bargaining agreements, requires bidders to demonstrate an ability to maintain labor harmony on the project. For further information or to review plans and specifications, interested parties should contact Lead Estimator Joe Bockelman.

Kiewit Infrastructure West Co.

POSTED

about 11 hours ago

DEADLINE

Seeking Qualified Subconsultants for City of Bend’s Southwest Sewer Improvement Phase 3, Project No. 1SSW3

Solicitation # seeking-qualified-subconsultants-city-bends-southwest-sewer-improvement-phase-3-project-no-1ssw3

Water Systems Consulting, Inc. is seeking qualified subconsultants to assist with the Southwest Sewer Improvement Phase 3 project for the City of Bend, Oregon. The scope of work involves professional design services to address sewer system deficiencies, including the extension of gravity sewer mainlines, the decommissioning of existing pump stations, and the installation of service laterals for properties currently using onsite septic systems. The project may also encompass necessary transportation improvements. WSC is specifically looking for expertise in roadway and drainage engineering, surveying and mapping, right of way services, and public outreach. This project is funded by the Clean Water State Revolving Fund through the Oregon Department of Environmental Quality. The solicitation is open to various small business certifications, including DBE, WOSB, and SDVOSB, with a response deadline of September 29, 2026.

Water Systems Consulting, Inc.

POSTED

about 11 hours ago

DEADLINE

SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT

Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water

GHD Inc. is soliciting qualified subconsultants to support the Corydon Well Replacement Design Project for the Elsinore Valley Municipal Water District in California. The project seeks expertise in engineering, environmental services, surveying, geotechnical analysis, permitting, public outreach, and utility location. This opportunity is specifically open to Disadvantaged, Small, Women-Owned, and Minority-Owned Business Enterprises, as well as other certified small business entities. Interested firms must contact Charlie Brown via email to submit a qualifications package and request solicitation documents. The deadline for initial contact is August 7, 2026, with a final deadline to receive solicitation documents by 5pm PST on Friday, August 14, 2026. Relevant NAICS codes for this engagement include 541330, 237110, and 541490, among others.

POSTED

about 11 hours ago

DEADLINE

Subcontracting Opportunity: City of Bend’s Southwest Sewer Improvement Phase 3, Project No. 1SSW3

Solicitation # 27-3214

Parametrix is seeking qualified subconsultants to provide civil engineering design and right-of-way services for the City of Bend’s Southwest Sewer Improvement Phase 3, Project No. 1SSW3. The project aims to address sewer system deficiencies in southwest Bend by extending a gravity trunk sewer line to unsewered areas, decommissioning existing pump stations in the Romaine Village area, and installing service laterals to transition properties from private septic systems to public sewer. The scope may also include roadway reconstruction, ADA curb ramp and curb design, and minor transportation improvements such as turn lanes or mini roundabouts. The project is funded by the Clean Water State Revolving Fund administered through the Oregon Department of Environmental Quality, with a total design and construction budget of 3,875,000 dollars. The procurement process is managed by the City of Bend, with a proposal deadline of September 29, 2026. Selection is based on technical and administrative capabilities, with the potential for interviews to influence final scoring. Key deliverables include a preliminary engineering report, a public outreach plan, and construction contract documents at 30, 60, 90, and 100 percent completion, culminating in record drawings. The City intends to advertise for construction services in Fall or Winter 2027. Parametrix is actively soliciting firms with recognized federal, tribal, state, local, or independent DBE certifications as part of a good faith effort to include small, minority-owned, women-owned, and veteran-owned businesses.

POSTED

about 11 hours ago

DEADLINE

Design / Engineering for Microgrid System and DC fast charger

Solicitation # PE-64458-NONST-2027-000000037

The City of Decatur is soliciting proposals from qualified vendors to provide turnkey services for the design, bid assistance, and construction administration of a microgrid system. This project, located at the Decatur Police Department at 420 West Trinity Place in Decatur, Georgia, involves the installation of a solar photovoltaic generation system, a battery energy storage system, and a DC fast charger. The solicitation, identified as PE-64458-NONST-2027-000000037, was posted on September 11, 2026, with a response deadline of October 13, 2026. The project start date will be established following the award and coordination with Georgia Power. Interested parties may contact David Junger for further information regarding this SLED organization opportunity.

City of Decatur

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Infrastructure - Request for Proposal - RFP FOR SITE AND GEOTECHNICAL INVESTIGATION CONSULTANT SERVICES FOR VARIOUS LOCATIONS – ELEVEN (11) SOUTH ALBERTA SCHOOL SITES

Solicitation # AB-2026-06239

The Infrastructure agency is seeking proposals from qualified consultants to provide site and geotechnical investigation services for eleven school sites located in South Alberta. This solicitation, identified as AB-2026-06239, focuses on essential land assessments and technical investigations to support the development of educational facilities in the Calgary region. Interested parties must submit their responses by the deadline of October 7, 2026, at 10:00 PM. The procurement process is being managed by Project Procurement Specialist Nkechi Nzewi, and further details regarding the submission process can be found through the official Alberta purchasing portal.

POSTED

about 11 hours ago

DEADLINE

Civil/Roadway Engineering Design (100% Plans)

Department of Environmental Protection

POSTED

about 12 hours ago

DEADLINE

Professional Services for Pensacola Bay Unpaved Roads Project

Solicitation # 2027002

The Department of Environmental Protection of Florida is seeking qualified vendors to provide professional services for the Pensacola Bay Unpaved Roads Project under solicitation number RFSOQ 2027002, which was posted on July 7, 2026, with a response deadline of August 11, 2026, at 7:00 PM Eastern Time. The work falls under NAICS code 70171503 and is classified as a state, local, or educational government procurement, with performance location specified within the state of Florida. Interested parties must submit their responses by the stated deadline, and failure to file a formal protest within the timeframe outlined in section 120.57(3) of the Florida Statutes or to post the required bond or security will result in the waiver of rights to pursue any administrative proceedings under Chapter 120. All inquiries and submissions should be directed to Sabina Flanagan at sabina.flanagan@FloridaDEP.gov or by phone at 850-245-2187. Additional details regarding technical and administrative requirements are contained within the full solicitation document accessible via the provided online portal.

Department of Environmental Protection

POSTED

about 12 hours ago

DEADLINE

Engineering Services for the Mountain View Sanitary Pump Station Facility Rehabilitation

Solicitation # RFP 2417

The Township of Wayne, through its Division of Water and Sewer, is soliciting proposals from qualified professional engineering firms for the rehabilitation of the Mountain View Sewer Pump Station. The selected firm will be responsible for providing comprehensive design, bidding, and construction administration services to ensure the successful facility upgrade. This solicitation, identified as RFP 2417, was posted on September 11, 2026, with a response deadline of October 6, 2026, at 3:00 PM. Interested parties should direct inquiries to Nicole Lee, the Specifications Writer, via email or phone. The project is managed by the Purchasing Division of the Township of Wayne in New Jersey.

Purchasing Division

POSTED

about 14 hours ago

DEADLINE

Specialized Technical Services (IT & Planning)

Navsup Flt Logistics Ctr Yokosuka

POSTED

about 15 hours ago

DEADLINE

CryCam UV System Installation and Personnel Training

Brookhaven National Labor -Doe Contractor

POSTED

about 15 hours ago

DEADLINE

Architectural & Engineering Design Services

Department Of Commerce Sspo

POSTED

about 15 hours ago

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support

Same awarding agency

16--100 W FILTER PA,AIR, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QTC89

This pre-solicitation under solicitation number N0038326QTC89 is for the repair or modification of 19 units of air filters, identified by NSN 7R-1680-016108983-E7. The delivery terms are FOB Origin. Due to the flight-critical nature of the part and the specialized technical data and manufacturing knowledge required, the government requires engineering source approval from the design control activity to ensure quality. The government intends to solicit and negotiate with a single source under FAR 6.302-1, as existing approved sources hold essential data rights not economically available to the government. Prospective contractors who are not already approved must submit detailed information via the NAVSUP Weapon Systems Support Source Approval brochures to be considered for award. While this is a notice of intent rather than a request for competitive proposals, the government will consider responses and capability statements received within the specified timeframe to determine if a competitive procurement is warranted.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in about 2 months

16--CARTRIDGE,OPERATING- AND SIMILAR REPLACEMENT PARTS, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QNB27

This pre-solicitation from the Navsup Weapon Systems Support is for the procurement of 16 units of operating cartridges and similar replacement parts under NSN 7R-1680-016098984-P8. The delivery terms are FOB Origin. Because the items are flight critical, the government requires source approval prior to the contract award. Only previously approved sources have been solicited, though new sources may apply by submitting the required documentation detailed in the NAVSUP WSS Source Approval Information Brochures. The government intends to negotiate with a single source under FAR 6.302-1, but interested parties may submit proposals or capability statements within 45 days of the notice. Award is contingent upon the offeror meeting all qualification requirements at the time of award. This acquisition is not being conducted under FAR Part 12 for commercial items, and it is subject to various Free Trade Agreements and the Buy American Act.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in about 1 month

70--PROCESSOR,DISPLAY A, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QNB29

This contract is for the procurement of 17 units of a flight critical display processor under NSN 7R-7010-015222097-LC, with delivery terms set as FOB Origin. Due to the critical nature of the part and the fact that essential technical data and manufacturing knowledge are held by specific sources, the government requires engineering source approval from the design control activity to ensure quality. The government intends to negotiate with a single source under FAR 6.302-1, though other responsible sources may submit capability statements or proposals within the specified timeframe for consideration. Prospective bidders who are not already approved sources must submit detailed information as outlined in the NAVSUP Weapon Systems Support Source Approval Information Brochures. Failure to provide the required data or proof of a pending approval request will result in the proposal not being considered for award. The government maintains the discretion to proceed with a non-competitive award based on fleet support needs if new source approvals cannot be processed in time to meet operational requirements.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Solicitation # N0038326QLB20

This presolicitation notice from the Department of Defense, specifically the Navsup Weapon Systems Support office in Philadelphia, is for the procurement of two ECS valves. The requirement is identified by NSN 7R-1660-016686580-P8 and reference number 423785-2, with delivery terms specified as FOB Origin. The solicitation, numbered N0038326QLB20, was posted on September 11, 2026, and has a response deadline of October 27, 2026. Interested parties should direct inquiries to the primary point of contact, Tia Johnson, via the provided email or phone contact information.

Industrial Valve Manufacturing

POSTED

about 15 hours ago

DEADLINE

in about 2 months

14--ADAPTER ASSEMBLY,MI, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QLB19

This presolicitation notice, issued by the Navsup Weapon Systems Support under the Department of Defense, concerns the repair and modification of 64 adapter assemblies. The contract is identified by NSN 7R-1440-014553646-QE and references TDP version 001 and reference number 74A730501-1003. Delivery terms are specified as FOB Origin. The solicitation, numbered N0038326QLB19, was posted on September 11, 2026, with a response deadline of October 27, 2026. The contracting office is located in Philadelphia, Pennsylvania, and the primary point of contact for this requirement is Tia Johnson.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 15 hours ago

DEADLINE

in about 2 months

58--INTERFACE UNIT,COMM, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QMB43

The Department of Defense, through Navsup Weapon Systems Support, is initiating a pre-solicitation for the procurement of 10 Interface Units, Comm, identified by NIIN 017000735 and part number 123AV93672-1. This action is intended to be negotiated with a single source under the authority of FAR 6.302-1, with delivery terms set as FOB Origin. Interested parties may submit proposals, quotations, or capability statements to demonstrate their ability to meet the requirement. All submissions must be received within 45 days of the synopsis publication, or 30 days if awarded under an existing Basic Ordering Agreement. The government retains sole discretion in determining whether to proceed with a competitive procurement based on the responses received.

Other Communications Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in about 2 months

58--RECORDER,SIGNAL DAT, IN REPAIR/MODIFICATION OF

Solicitation # N0038326RDA43

NAVSUP Weapon System Support Philadelphia intends to solicit a sole source contract for the repair of 36 signal data recorders for F/A-18 aircraft. The requirement, identified by NSN 7R-5895-013825123-GF and part number 136779-1, is intended for award to DRS Laurel Technologies, the original equipment manufacturer. This sole source determination is based on the fact that the government does not own the necessary technical data or drawings to utilize additional sources. The procurement will be conducted under FAR Part 15 and follows NAICS code 334290 and PSC 5895. Delivery is specified as FOB Origin, and the contract will include Buy American clauses and unique identification requirements. While the government intends to negotiate with the sole source, interested parties may submit capability statements to the contracting officer. The solicitation is expected to be issued around September 29, 2026, with a closing date of October 29, 2026.

Other Communications Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in about 1 month

16--BUS POWER CONTROL U, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QNB26

This presolicitation under number N0038326QNB26 is for the repair and modification of 11 units of Bus Power Control U, identified by NSN 7R-1680-015854816-P8. The delivery terms are FOB Origin. Due to the flight critical nature of the part and the fact that essential technical data and manufacturing knowledge are held by approved sources, this requirement necessitates engineering source approval by the design control activity to ensure part quality. The government intends to solicit this requirement from a single source under FAR 6.302-1, though other responsible sources may submit capability statements or proposals within the specified timeframe. Any entity not previously approved as a source must submit the required documentation via the NAVSUP Weapon Systems Support Source Approval Information Brochures to be considered for award. Failure to provide the necessary qualification data will result in the proposal not being considered.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 15 hours ago

DEADLINE

in about 1 month

66--COMPUTER,FLIGHT CON, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QSC24

This presolicitation notice, issued by the Navsup Weapon Systems Support under the Department of Defense, concerns the repair and modification of flight control computers. The requirement is for seven units under NSN 7R-6615-016276036-P8, utilizing TDP version 001, with delivery terms set as FOB Origin. The solicitation, numbered N0038326QSC24, was posted on September 11, 2026, with a response deadline of October 27, 2026. The contracting office is located in Philadelphia, Pennsylvania, and the primary point of contact for this requirement is Sarah L. Austin.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 15 hours ago

DEADLINE

in about 2 months

59--OSCILLATOR,NONCRYST, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QBA16

This solicitation from Navsup Weapon Systems Support seeks a contractor to perform the repair, overhaul, and testing of non-crystal oscillators (NSN 5955014262653, Part Number 459525) to return them to a Ready For Issue condition. The work must be performed in accordance with the latest approved methods and publications, with all activities subject to the terms of Basic Ordering Agreement N00383-26-G-0017. The contractor is responsible for providing all necessary facilities, labor, materials, and tooling, and must maintain a quality management system compliant with ISO 9001 or SAE AS9100. Key contractual provisions include specific protocols for identifying items that are Beyond Economical Repair (BER), Missing on Induction (MOI), or requiring Over and Above Repair (OAR), all of which require written concurrence from DCMA and the Procuring Contracting Officer. The contract mandates strict adherence to configuration management and prohibits part cannibalization without specific approval. The response deadline for this requirement has been extended to October 13, 2026.

Other Electronic Component Manufacturing

POSTED

about 15 hours ago

DEADLINE

in about 1 month

16--VALVE ASSEMBLY,ENVI, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QSC26

Solicitation N0038326QSC26, issued by the Navsup Weapon Systems Support, seeks three units of a flight critical valve assembly under NSN 7R-1660-016686584-P8. This is a commercial off-the-shelf item with delivery terms set as FOB Origin. The response deadline for this presolicitation is October 26, 2026. Because the item is flight critical, government source approval is mandatory prior to contract award. Only previously approved sources have been solicited, and any new applicants must submit comprehensive documentation as outlined in the NAVSUP WSS Source Approval Information Brochures. Failure to provide the required source approval data or proof of a pending evaluation will result in the offer not being considered for award. This acquisition may be subject to the Buy American Act and various Free Trade Agreements.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in about 1 month

16--CHASSIS, WIRED,AIRC, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QMB42

The Department of Defense, through Navsup Weapon Systems Support, is initiating a presolicitation for the repair or modification of three wired aircraft chassis, identified by NIIN 016676349 and part number 123AV92023-1. This action is intended to be a single-source procurement under the authority of FAR 6.302-1, with delivery terms set as FOB Origin. Interested parties may submit proposals, quotations, or capability statements to demonstrate their ability to meet the requirement. While this notice is not a formal request for competitive proposals, the government will consider all responses received within 45 days of publication, or 30 days if awarded under an existing Basic Ordering Agreement. The final determination regarding whether to proceed with a competitive procurement remains at the sole discretion of the government.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 15 hours ago

DEADLINE

in about 2 months

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS