Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Aluminum Alloy 6061 Bar Stock Supply

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply of flat aluminum alloy 6061 bar stock with precise dimensions: 0.500 inches thick, 1.250 inches wide, and lengths ranging from 10 to 12 feet, cut exclusively in whole-foot increments. All material must strictly conform to TDP Rev A Gen 2 specifications and meet applicable military standards to ensure suitability for defense applications. The bars are to be delivered in full compliance with the defined technical and dimensional requirements without deviation. This is a subcontract issued by the Defense Logistics Agency under the Department of Defense, categorized under NAICS code 331314 for aluminum rolling, extruding, and drawing. The solicitation was posted on August 3, 2026, with responses due by August 17, 2026, leaving a two-week window for submission. The place of performance and point of contact details are not specified, but the contract is accessible through the DIBBS platform using the provided link. All bidders must adhere to the technical and procedural guidelines outlined in the documentation to qualify for award.

General Info

Supply 6061 aluminum bar stock 0.5" x 1.25" x 10–12 ft, TDP Rev A Gen 2, military specs, DLA subcontract.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

331314 - Secondary Smelting and Alloying of AluminumView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of flat aluminum alloy 6061 bars, 0.500 inches thick, 1.250 inches wide, and 10 to 12 feet long, cut in whole-foot lengths, conforming to TDP Rev A Gen 2 and military standards.

Similar Contracts

Same NAICS industry code

Specialized Materials Supply for Aerospace PanelThe contract entails the supply of high-performance aerospace-grade raw materials, including aluminum alloys and advanced composites, strictly adhering to the technical specifications outlined in TDP Rev A Gen 1, with rigorous requirements for full material traceability and compliance with military packaging standards. These materials are critical for the fabrication of aerospace panels and must meet exacting quality and reliability benchmarks necessary for defense applications. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, reinforcing support for small business participation in defense contracting. The North American Industry Classification System code 331314 designates this as a nonferrous metal rolling, drawing, and extruding operation. The solicitation was posted on August 5, 2026, with a deadline for responses set for August 13, 2026, and performance is to be carried out at Robins Air Force Base, Georgia, with a zip code of 31098-1887. While no specific point of contact or agency office address is provided beyond the overarching Department of Defense affiliation, the contracting activity falls under the ASC SUPPLIER OPER AE AND AF DIV. The contract’s operational context implies direct support to defense systems requiring certified materials with proven durability under extreme conditions, and all shipments must comply fully with military-grade packaging and documentation protocols to ensure integrity throughout the supply chain.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

Aluminum Alloy Raw Material SupplyThe contract seeks the supply of aluminum alloy material meeting SAE AMS-QQ-A-200/3 specifications for use in defense manufacturing applications. All materials must be accompanied by certified mill test reports to verify compliance with chemical composition, mechanical properties, and processing standards. The material is intended for critical components within defense systems, requiring strict adherence to quality and traceability protocols. Performance and delivery are expected to occur at Tracy, California, with the zip code 95304-5000 established as the official place of performance. The solicitation is classified as a subcontract under NAICS code 331314 and is issued by the ASC SUPPLIER OPER OEM DIVISION, a division of the Department of Defense. Interested parties must submit responses by August 7, 2026, at 5:00 PM Eastern Time, following the posting date of July 30, 2026. The procurement process is managed through the DIBBS system with the RFQ identifier SPE4A526T314N.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Aerospace Materials Supply (Aluminum Plate)The contract seeks the supply of raw or semi-finished aluminum plate material compliant with stringent aerospace specifications including AMS and MIL-SPEC standards, intended for use in final fabrication processes within the defense and aerospace sectors. The material must meet exacting quality and performance benchmarks required for mission-critical applications, ensuring structural integrity and reliability under extreme operational conditions. Submission responses are due by August 6, 2026, with the opportunity open as a subcontract under the NAICS code 331314, which classifies the industry as Aluminum Rolling, Drawing, and Extruding. Performance of the contracted work is designated at Joint Base McGuire-Dix-Lakehurst with ZIP code 08641-5500, indicating the operational location where the materials may be delivered or inspected. The contracting entity is the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, signifying direct alignment with military procurement requirements. The solicitation is publicly accessible via the DIBBS platform, and while no set-aside provisions or point of contact details are provided, bidders must ensure full compliance with aerospace material certifications and delivery timelines to qualify for award.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

in about 15 hours

Raw Material Supply (Aluminum/Composites)The contract requires the supply of aluminum sheet, plate, or composite materials certified to MIL-SPEC or AMS standards for use in Longeron fabrication, ensuring compliance with exacting military and aerospace material specifications. Full traceability of all delivered materials is mandatory, with each batch accompanied by comprehensive material test reports that validate chemical composition, mechanical properties, and processing history to meet rigorous quality and safety benchmarks. All materials must be sourced and documented to provide end-to-end accountability from production to delivery. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, targets the NAICS code 331314 for aluminum rolling, and is positioned for performance in support of defense-related applications. The solicitation, posted on July 21, 2026, is open for bids without a set-aside classification, and while no specific location or point of contact is detailed, the primary delivery and performance expectations are tied to defense manufacturing requirements. The award will be administered through the DIBBS system under contract number SPE4A726P4268, emphasizing standardized compliance, documentation rigor, and supply chain integrity for critical airframe components.

Defense Logistics Agency

POSTED

DEADLINE

Specialty Materials SupplyThe contract involves the supply of high-grade aluminum or alloy materials in plate, sheet, or extruded form that must comply with military material specifications including AMS and MIL-DTL standards, intended for use in the production of structural panels. The materials must meet strict technical requirements to ensure performance, durability, and compatibility with defense-grade manufacturing processes. This is a subcontract under the Defense Logistics Agency, part of the Department of Defense, with the NAICS code 331314 indicating classification within aluminum production and rolling. The solicitation was posted on July 21, 2026, and the contract number is SPE4A726P6107, indicating it is part of a larger defense procurement effort. While specific delivery locations and point of contact details are not provided, the materials are expected to be delivered to designated defense production facilities aligned with military operational needs. Compliance with military specs is mandatory, and suppliers must demonstrate capability to consistently produce materials to exacting standards without deviation. The contract does not indicate a set-aside status, meaning it is open to all qualified contractors regardless of business size or ownership characteristics.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Raw Materials or Specialty Alloys for Fairing ProductionThe contract involves the supply of certified aerospace-grade raw materials, including aluminum alloys, titanium, and composite pre-preg, specifically for the fabrication of aircraft fairings. All materials must come with full traceable certifications to ensure compliance with stringent aerospace quality and safety standards. This subcontract is part of a broader effort by the Defense Logistics Agency under the Department of Defense to support the production of critical airframe components, relying on highly regulated materials that meet exacting performance requirements. The North American Industry Classification System code 331314 indicates the industrial focus on aluminum Rolling, Drawing, and Extruding, underscoring the specialized nature of the supplied materials. The solicitation was posted on July 21, 2026, and the awarded contract reference is SPE4A726P7499, though specific performance locations and point of contact details are not provided.

Defense Logistics Agency

POSTED

DEADLINE

Raw Material Supply – Aerospace-Grade Aluminum or Composite PanelsThe contract entails the supply of cut-to-size, certified aerospace-grade aluminum sheets or composite panels specifically for use in the fabrication of aircraft doors, with all materials required to meet MIL or AMS specifications to ensure compliance with stringent defense aviation standards. The materials must be precision-manufactured to exact dimensional tolerances and certified for structural integrity, corrosion resistance, and performance under extreme operational conditions typical of military aircraft environments. This subcontract is part of a larger defense procurement effort led by the Defense Logistics Agency under the Department of Defense, with the work classified under NAICS code 331314, indicating alignment with aluminum rolling and extruding operations. The solicitation, posted on July 21, 2026, does not specify a set-aside designation or geographic performance location, implying that suppliers may operate from any qualified facility provided they meet all technical, quality, and certification mandates. Delivery must align with the contract’s schedule and traceability requirements to support the integrity of the aircraft door assembly line.

Defense Logistics Agency

POSTED

DEADLINE

Raw Material Supply (Aerospace-Grade Alloy or Composite)The contract entails the supply of certified aerospace-grade raw materials, specifically aluminum 7075-T6 alloy or composite pre-preg, for the fabrication of aircraft fairings, with strict adherence to AMS and MIL specifications. Full traceability is required throughout the material lifecycle, ensuring that every batch can be tracked from origin to final integration to meet rigorous defense industry quality and safety standards. This subcontract is issued under the Department of Defense through the Defense Logistics Agency and is classified under NAICS code 331314, reflecting its focus on aluminum rolling, drawing, and extruding. The materials must comply with all applicable military and aerospace standards to support critical aircraft components, and performance is expected to align with defense procurement integrity requirements. The solicitation was posted on July 21, 2026, and is accessible via the DIBBS system under contract number SPE4A726P4718.

Defense Logistics Agency

POSTED

DEADLINE

Raw Material Supply for Aerospace Structural PanelThe contract entails the supply of aerospace-grade aluminum or composite materials compliant with MIL-DTL or AMS specifications for use in the manufacturing of structural aircraft panels. These materials must meet stringent quality and performance standards required for defense aerospace applications, ensuring structural integrity under extreme operational conditions. The subcontract falls under NAICS code 331314, indicating classification within the primary metals industry sector, and is issued by the Defense Logistics Agency under the Department of Defense to support critical defense manufacturing capabilities. The contract was posted on July 21, 2026, and is designated as a subcontract, indicating it is part of a larger supply chain rather than a direct government procurement. There is no set-aside designation specified, meaning the contract is open to all eligible contractors regardless of business size or ownership type. Materials will be delivered to an unspecified location within the United States, with no city, state, or zip code provided for the place of performance. While the point of contact details are not included, the official contract record can be accessed through the DIBBS portal using the provided UI link for award and delivery details.

Defense Logistics Agency

POSTED

DEADLINE

Aerospace Materials Supply (Aluminum/Composite Sheet)The contract involves the supply of raw materials, specifically aluminum alloy sheet or composite panels, that must comply with MIL-DTL-45204 or an equivalent specification, for use in the fabrication of aircraft skin components. These materials are critical to aerospace manufacturing and must meet rigorous military standards for structural integrity, durability, and performance under operational conditions. The contract is classified as a subcontract under the Department of Defense, administered by the Defense Logistics Agency, and is tied to the NAICS code 331314 which pertains to aluminum rolling, drawing, and extruding. The solicitation was posted on July 21, 2026, and the place of performance and point of contact details are not specified, indicating that the physical delivery location and direct liaison may be determined post-award. The contract is accessible through the DIBBS system under award number SPE4A726P5171, and while no set-aside type is designated, the materials are essential for defense-related aviation projects, requiring suppliers to demonstrate capability in producing certified aerospace-grade materials consistent with military specifications.

Defense Logistics Agency

POSTED

DEADLINE

Raw Material Supply for Aerospace ComponentsThe contract obligates the supplier to provide certified aerospace-grade aluminum extrusions or alloy stock specifically for the manufacturing of aircraft channels, with strict requirements for full material traceability and accompanying mill test reports to ensure compliance with rigorous aerospace standards. All materials must meet defined specifications for composition, mechanical properties, and quality control, supporting critical aircraft component fabrication where failure is not an option. The supplier is expected to maintain end-to-end documentation from raw material origin through final delivery to facilitate regulatory and audit requirements. This is a subcontract under the Department of Defense, managed by the Defense Logistics Agency, with the NAICS code 331314 indicating classification under aluminum manufacturing. The contract was posted on July 21, 2026, and performance is expected to align with defense supply chain standards, though the exact place of performance and point of contact are not specified. The procurement leverages the DLA’s DIBBS system for award administration, indicating a formalized and tracked acquisition process within the federal contracting framework. All deliverables must adhere to the highest levels of quality assurance to support the integrity and safety of military aviation systems.

Defense Logistics Agency

POSTED

DEADLINE

Raw Material Supply for Aerospace Panel FabricationThe contract is for the supply of certified aerospace-grade aluminum plate or sheet compliant with MIL-DTL-46855 or an equivalent specification, intended for use in the fabrication of structural panels. Full traceability of material lot numbers, heat treat records, and mill certifications is required to ensure adherence to stringent aerospace quality standards. All deliveries must be accompanied by complete documentation confirming conformity to performance, chemical composition, and mechanical property requirements, with no tolerance for non-compliant or non-certified material. The material is destined for defense-related applications under the Department of Defense, with performance tied to the reliability and integrity of critical aerospace structures. This subcontract is managed by the Defense Logistics Agency under NAICS code 331314, which categorizes it within the aluminum rolling, drawing, and extruding industry. The solicitation was posted on July 21, 2026, with the contract identified by award number SPE4A726P5061. Although specific delivery locations and point of contact details are not provided, the requirement for full compliance and traceability indicates the material must meet exacting military and industry benchmarks for aerospace structural use. The contract does not specify a set-aside status, suggesting it is open to general industry participation under standard federal procurement guidelines for defense-supplied materials.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Structural Steel FabricationThe contract titled Structural Steel Fabrication is a subcontract issued by the Defense Logistics Agency under the Department of Defense for the fabrication and detailing of structural steel members intended for use in buildings, bridges, or platforms. It is categorized under NAICS code 332312, which specifically encompasses structural metal fabrication. The solicitation was posted on August 5, 2026, with a response deadline of August 13, 2026, indicating a tight window for proposals. Performance of the work is required at Cherry Point, North Carolina, with the ZIP code 28533-0021 designated as the official place of performance. There is no set-aside designation specified for this opportunity, meaning it is open to all eligible contractors without restrictions based on business size or other classifications. The contract was posted through the DIBBS system, and interested parties must access the full details via the provided UI link to submit responses or seek further information. No point of contact details are listed in the public data, so inquiries must be handled through the designated procurement portal.

Fabricated Structural Metal Manufacturing

POSTED

about 9 hours ago

DEADLINE

Ready-Mix Concrete SupplyThe contract is for the supply of ready-mix concrete to a project site at Cherry Point, North Carolina, with specific technical requirements including defined slump, compressive strength, and the inclusion of approved admixtures to ensure performance under project conditions. The solicitation is issued under the NAICS code 327320 and is classified as a subcontract, with the Defense Logistics Agency acting on behalf of the Department of Defense as the contracting organization. All deliveries must meet the exacting standards mandated by the project, and failure to comply with the specified material properties could result in rejection or contract penalties. The opportunity was posted on August 5, 2026, with a response deadline of August 13, 2026, limiting the timeframe for potential suppliers to submit proposals. The place of performance is strictly designated to the Cherry Point location with zip code 28533-0021, indicating that logistics and delivery scheduling must be optimized for this geographic constraint. No set-aside designation is specified, meaning the contract is open to all eligible vendors regardless of business size or status. Interested parties must access the official DIBBS portal via the provided link to obtain detailed specifications and submit responses in accordance with procurement guidelines.

Ready-Mix Concrete Manufacturing

POSTED

about 9 hours ago

DEADLINE

Heavy Hauling and Equipment TransportThe contract titled Heavy Hauling and Equipment Transport is a subcontract issued by the Defense Logistics Agency under the Department of Defense for the transportation of heavy construction equipment, materials, and oversized loads to and from the Cherry Point location with zip code 28533-0021. The solicitation was posted on August 5, 2026, with a response deadline of August 13, 2026, and is classified under NAICS code 484220, which pertains to truck transportation of heavy and irregular loads. The place of performance is specifically designated to Cherry Point, indicating that all transport activities must be coordinated to and from this site. No set aside provisions or organization type details are specified, and no point of contact information is provided within the contract data. Interested parties must respond through the official DIBBS portal using the provided link prior to the deadline to be considered for award.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 9 hours ago

DEADLINE

Environmental Compliance and MonitoringThe contract pertains to environmental compliance and monitoring activities focused on stormwater management, erosion control, and regulatory adherence during construction operations at Cherry Point, North Carolina, with a ZIP code of 28533-0021. It is a subcontract under the Defense Logistics Agency, part of the Department of Defense, and falls under the NAICS code 541620, which designates environmental consulting services. The work involves continuous oversight to ensure that all construction activities meet federal, state, and local environmental regulations, particularly those related to water quality protection and soil stabilization. Monitoring will include routine inspections, documentation of best management practices, reporting of non-compliance issues, and coordination with regulatory authorities as needed. The solicitation was posted on August 5, 2026, and responses are due by August 13, 2026, indicating a tight timeline for qualified vendors to submit proposals. The contract does not specify any set-aside status or target demographics for participation, meaning it is open to all eligible subcontractors. Performance is localized to the Cherry Point area, requiring on-site presence and familiarity with regional environmental conditions and regulatory frameworks. The contractor must be prepared to implement and maintain an effective environmental management plan throughout the construction lifecycle, with an emphasis on preventing pollution incidents and ensuring timely compliance reporting to avoid penalties or work stoppages.

Environmental Consulting Services

POSTED

about 9 hours ago

DEADLINE

Surveying and Site LayoutThis contract involves topographic surveys, boundary verification, and the precise layout of structures and infrastructure to support defense-related projects. The work is designated as a subcontract under the NAICS code 541370, which pertains to surveying and mapping services, and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on August 5, 2026, with a response deadline of August 13, 2026, and performance is required at Cherry Point, North Carolina, with the ZIP code 28533-0021. All surveying activities must meet high accuracy standards to ensure proper alignment and placement of facilities and infrastructure critical to military operations. The contract does not specify a set-aside designation or point of contact, and details are accessible through the provided DIBBS portal link.

Surveying and Mapping (except Geophysical) Services

POSTED

about 9 hours ago

DEADLINE

Roadway Paving and AsphaltThe contract involves grading, base preparation, and asphalt paving for roads, parking lots, and accessways under the NAICS code 237310, classified as a subcontract with the Defense Logistics Agency within the Department of Defense. Performance is required at Cherry Point, North Carolina, with a zip code of 28533-0021, and the solicitation was posted on August 5, 2026, with a response deadline of August 13, 2026. All work must meet the technical and quality standards expected for military and government infrastructure, and bidders are expected to comply with any applicable federal regulations governing construction and procurement. The place of performance is fixed, and successful proposers will be responsible for mobilizing equipment, sourcing materials, and completing the scope within the project timeline.

Highway, Street, and Bridge Construction

POSTED

about 9 hours ago

DEADLINE

Concrete Formwork and PlacementThe contract titled Concrete Formwork and Placement specifies the requirement for forming, reinforcing, and pouring concrete to construct foundations, slabs, walls, and other structural elements at Cherry Point, North Carolina, with a zip code of 28533-0021. This is a subcontract under the NAICS code 238110, which corresponds to concrete work, and is solicited by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on August 5, 2026, with a response deadline of August 13, 2026, indicating a brief window for interested parties to submit proposals. The place of performance is clearly defined, and while no point of contact or set-aside details are provided, the scope of work centers on essential structural concrete operations critical to defense infrastructure projects. All work must comply with the technical and quality standards expected for military construction, and submissions must be made through the designated DIBBS portal prior to the deadline.

Poured Concrete Foundation and Structure Contractors

POSTED

about 9 hours ago

DEADLINE

Plumbing and Piping SystemsThe contract pertains to the installation of potable water, drainage, and gas piping systems within commercial or industrial facilities, under a subcontract classification with NAICS code 238220 for plumbing, heating, and air-conditioning contractors. The work is scoped for performance at Cherry Point, North Carolina, with a zip code of 28533-0021, and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on August 5, 2026, with a firm response deadline of August 13, 2026, leaving a limited window for potential subcontractors to submit proposals. All systems must meet stringent operational and safety standards appropriate for defense-related infrastructure, and the successful bidder will be responsible for full compliance with applicable codes and regulations governing utility installation in federal facilities.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 9 hours ago

DEADLINE

Erosion Control and LandscapingThe contract calls for the installation of erosion control measures and final site landscaping at Cherry Point, North Carolina, with a primary focus on seeding, sod installation, and irrigation system implementation. Targeted under NAICS code 561730, this subcontract is issued by the Defense Logistics Agency under the Department of Defense and is expected to support environmental stabilization and aesthetic completion of a federal facility. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026, indicating a narrow window for qualified contractors to submit proposals. Work must be performed at the specified location, 28533-0021, and no set-aside provisions are indicated, meaning the opportunity is open to all eligible subcontractors regardless of size or status. All project execution will be governed by the terms outlined in the official solicitation accessible through the DIBBS portal.

Landscaping Services

POSTED

about 9 hours ago

DEADLINE

Temporary Traffic ControlThe contract pertains to the setup and maintenance of temporary traffic control zones to ensure safety during construction operations, requiring specialized expertise in traffic management systems and compliance with safety standards. It is issued as a subcontract under the NAICS code 561990, categorized under miscellaneous support services, and is managed by the Defense Logistics Agency within the Department of Defense, with performance required at Cherry Point, NC, 28533-0021. The solicitation was posted on August 5, 2026, and responses must be submitted by August 13, 2026, with no set-aside classification specified. The place of performance indicates on-site work in a military installation setting, where adherence to federal and defense-specific traffic Control guidelines is essential. All logistics and execution must align with the operational constraints of the location and the broader objectives of the agency’s construction projects.

All Other Support Services

POSTED

about 9 hours ago

DEADLINE

Electrical Installation and WiringThe contract titled Electrical Installation and Wiring involves the installation of comprehensive electrical systems for commercial or infrastructure projects under a subcontract arrangement. Scope of work includes the supply and installation of conduits, wiring, electrical panels, and lighting fixtures, with performance required at Cherry Point, North Carolina, ZIP code 28533-0021. The solicitation is administered by the Defense Logistics Agency under the Department of Defense and is classified under NAICS code 238210, which corresponds to electrical contracting. The opportunity was posted on August 5, 2026, with a response deadline of August 13, 2026, providing a narrow window for interested parties to submit proposals. The contract does not specify a set-aside type and lacks detailed point of contact information, requiring potential bidders to reference the official DIBBS portal link for further submission details and technical requirements.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 9 hours ago

DEADLINE

Packaging and Labeling Compliance ServicesThe contract requires the provision of compliant packaging, labeling, and Safety Data Sheet preparation for lamp shipments, strictly aligned with MIL-STD-129 and OSHA hazard communication standards. All deliverables must ensure that packaging meets military specifications for durability, identification, and handling, while labeling accurately conveys hazard information, product details, and regulatory compliance as mandated by federal safety requirements. The Safety Data Sheets must be fully current, properly formatted, and include all sections required under OSHA’s HazCom guidelines to support safe transport, storage, and use of the lamps. This subcontract is issued by the Defense Logistics Agency under the Department of Defense with a NAICS code of 541620, indicating professional, scientific, and technical services related to administrative management. The place of performance is designated as Phoenix, Arizona, with a zip code of 85043. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. There is no set-aside designation, and the contract is open to eligible subcontractors capable of fulfilling the technical and regulatory demands of military-grade packaging and hazard communication compliance.

Environmental Consulting Services

POSTED

about 9 hours ago

DEADLINE