Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aluminum Alloy 6061-T6 Round Bar Supplier

Active

Federal

Response Deadline11/16/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity with the Department of Defense DDSP New Cumberland Facility seeks a supplier for 66 feet of aluminum alloy 6061-T6 round bar. The required material must be extruded, rolled, or cold-finished with a diameter of 5.500 inches and provided in lengths ranging from 10 to 12 feet. All supplies must adhere to SAE AMS4117M, ASTM B660, and ASTM B666/B666M-20 standards to support prime contractors fulfilling DLA supply contracts. Compliance requirements include QSLD certification and adherence to the Buy American Act. The successful supplier must provide certified aluminum round bars accompanied by Mill-Material Certification. Interested parties must submit their responses by November 16, 2026, for performance at the New Cumberland location.

General Info

DoD seeks 66 feet of 5.5 inch aluminum round bar by November 16, 2026.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

NAICS

331318 - Other Aluminum Rolling, Drawing, and Extruding

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE8E4-27-T-0214.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BAR, METAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 3

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 05:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies 66 feet of round extruded, rolled, or cold-finished aluminum alloy 6061 bar with T-6 temper for prime contractors delivering DLA supply contracts. Provides material with a 5.500 inch diameter in lengths between 10 and 12 feet per SAE AMS4117M, ASTM B660, and ASTM B666/B666M-20 standards. Requires QSLD certification and Buy American Act compliance. Delivers certified aluminum round bar with Mill-Material Certification.

Similar Contracts

Same NAICS industry code

ALUM TUBE-5052-0-.750"

Solicitation # SPEFA1-27-Q-0010

Solicitation SPEFA1-27-Q-0010 is a firm fixed price request for the procurement of 144 inches of aluminum tube, specifically part number SAE-AMS-WW-T-700/4 (5052-0) with dimensions of .750 inch outer diameter by .035 inch wall thickness and 144 inches in length. The material must be supplied in accordance with SAE-AMS-WW-T-700, and all items must originate from the same heat lot with all material certifications provided upon delivery. The requested delivery date is October 6, 2026, with a required lead time of 4 days after receipt of order. Shipping is FOB Destination, with both inspection and acceptance occurring at the destination. The award will be based on best value, utilizing a trade-off process that evaluates cost or price alongside non-price factors such as past performance and quoted delivery. Packaging must comply with ASTM D3951 and RP001 for palletization, while all marking and labeling must adhere to MIL-STD-129. Invoicing and receiving reports are to be processed electronically through the Wide Area Workflow (WAWF) system. Offerors must be registered in the System for Award Management (SAM) and submit their quotes via the DLA Internet Bid Board System (DIBBS). The contract incorporates various FAR and DFARS clauses, including those regarding security prohibitions, subcontracting for commercial products, and prohibitions on contracting with certain foreign military companies.

DLA RECEIVING OFFICER NAVAL BASE CORONADO BLDG

POSTED

about 6 hours ago

DEADLINE

SPRING, HELICAL, TORS

Solicitation # SPE7L5-27-T-0466

This solicitation, issued by DLA Weapons Support Land Supplier Opns Engines, is a small business set-aside for the procurement of 565 units of helical torsion springs (NSN 5360000196857). Designated as a Navy critical safety item, the requirement mandates strict quality compliance, including a manufacturer's quality management system that adheres to SAE AS9100 or an equivalent standard. The contract requires first article testing, with the contractor delivering three units within 30 calendar days of the award for government testing and approval. Final delivery is expected within 482 days, with the destination specified as Industries of the Blind Inc in Greensboro, North Carolina. The procurement includes rigorous packaging and marking requirements per MIL-STD-2073-1E and MIL-STD-129, with specific mandates for unit package marking including the NSN, contract number, and CAGE codes. Offerors must comply with domestic material restrictions, including the Buy American Act and the Berry Amendment. Submissions must be made via the DIBBS portal by November 16, 2026, and are encouraged to include quantity ranges to accommodate volatile demand. Additionally, the contract prohibits the use of additive manufacturing unless specifically authorized and requires the use of the Wide Area WorkFlow system for invoicing and payment processing.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 6 hours ago

DEADLINE

304 Stainless Steel Round Bar Supply (Cold Finished/Centerless Ground)This subcontract involves the supply of 145 linear feet of 304 stainless steel round bars for prime contractors supporting Department of Defense supply contracts at Depot Oklahoma. The material must adhere to SAE AMS-QQ-S-763D and ASTM A700 standards, featuring a cold finish and centerless grind to a 0.750 inch diameter with three-quarters hard specifications. Bars are to be delivered in lengths of 10 to 12 feet, properly marked and packaged. To qualify for this requirement, the supplier must maintain a QSLD listing and provide full Mill-Material Certification. The performance of this contract is centered at Tinker AFB, with a response deadline set for November 13, 2026.

POSTED

DEADLINE

WIRE, ELECTRICAL

Solicitation # SPE7M1-27-T-1263

Solicitation SPE7M1-27-T-1263 is a Request for Quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of electrical wire, NSN 6145-01-088-2076. The requirement consists of two line items totaling 21,000 feet, with 1,000 feet destined for New Cumberland, PA, and 20,000 feet for Hill AFB, UT. The material must be supplied in 1,000-foot spools and must adhere to SAE AS22759/11A and SAE AS22759E standards. This is a critical application item and is listed as a Qualified Products List (QPL) item, requiring offerors to provide the manufacturing CAGE, source CAGE, item name, service identification, and test number. Delivery is required within 49 days after order, with specific need ship dates in October 2026 and August 2027. The contract specifies FOB Origin terms and requires destination inspection and acceptance. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129. Key restrictions include a prohibition on the intentional addition of mercury and compliance with the Berry Amendment and Buy American Act. All quotes must be submitted via the DIBBS portal, and payment will be processed through the Wide Area WorkFlow system. This acquisition is not a small business set-aside and falls under NAICS code 331318.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

ADAPTER, STRAIGHT, TUBE

Solicitation # SPE7M3-27-T-0809

Solicitation SPE7M3-27-T-0809 is a small business set-aside issued by the DLA Weapons Support Fluid Handling Division for the procurement of straight tube to boss adapters (NSN 4730-01-353-3222). The requirement consists of four line items totaling 118 units, constructed from titanium material with a 3/8 inch O.D. tube size. This is designated as a Navy Identified Critical Safety Item and a Critical Application Item, meaning it is a restricted source item requiring engineering source approval from the Government Design Control Activity. Quotes must be submitted via DIBBS by November 13, 2026, and offerors are encouraged to provide quantity ranges to accommodate demand volatility. The contract mandates strict quality and compliance standards, requiring the manufacturer's quality management system to comply with SAE AS9100. Inspection and acceptance will occur at the origin, with acceptance based on zero non-conformances in sample lots. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, specifically requiring heat-sealed barrier bags for cleanliness and detailed marking of the NSN, contract number, and CAGE codes on each unit package. Delivery is required within 71 days after receipt of order to various DLA distribution centers, including locations in North Carolina, Utah, California, and Florida. Offerors must comply with domestic material restrictions, including the Buy American Act and the Berry Amendment. The solicitation prohibits the use of additive manufacturing unless specifically authorized. Additionally, contractors must register via the DLA Account Management and Provisioning System to access the Vendor Shipment Module. Payment will be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

STRAINER, SEDIMENT

Solicitation # SPE7M3-27-T-0558

Solicitation SPE7M3-27-T-0558, issued by the DLA Weapons Support Fluid Handling Division, is a request for quotations for eight sediment strainers under NSN 4730012412463. The strainers must be constructed from aluminum sheets with perforated holes throughout, specifically requiring semi-holes and a design intent of .120 holes at .16 staggered centers. Production must adhere to Basic Drawing NR 19207 12349903 Revision C. The contract mandates a strict prohibition on Class I ozone depleting chemicals and requires compliance with DLA technical and quality requirements RA001, RQ011, RQ002, and RQ009. Delivery is required within 242 days, with a need ship date of July 3, 2027, delivered FOB Origin to DLA Distribution Anniston. Inspection and acceptance will occur at the origin, with acceptance based on zero non-conformances using sampling methods per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and RP001. This is not a small business set-aside, and offerors must submit quotes via DIBBS, ensuring compliance with the Buy American Act, the Berry Amendment, and various DFARS cybersecurity and telecommunications regulations. Invoicing must be processed through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

SPRING, HELICAL, COMPRES

Solicitation # SPE7L1-27-T-3227

Solicitation SPE7L1-27-T-3227 is a small business set-aside request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of 10 helical compression springs. This critical application item, identified by NSN 5360015070928 and part number 5008158, is intended for a Foreign Military Sales requirement for the Government of Israel Ministry of Defense. The procurement is governed by NAICS code 331318 and requires delivery within 20 days after order, with an original required delivery date of November 5, 2026. Terms are FOB Origin, with inspection and acceptance also occurring at the origin. The contract incorporates strict technical and quality requirements via the DLA Master List, including specific packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129. Logistics involve a freight forwarder in Jersey City, New Jersey, for final shipment to Israel. Offerors must submit quotes via the DIBBS system by November 13, 2026, and must comply with various FAR and DFARS clauses, including those regarding the Buy American Act, cybersecurity safeguarding of covered defense information, and the prohibition of additive manufacturing unless specifically authorized. Payment and receiving reports are to be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

CABLE, POWER, ELECTRICAL

Solicitation # SPE7M2-27-T-0287

Solicitation SPE7M2-27-T-0287 is a fixed-price request for quotations issued by the DLA Weapons Support Nuclear Reactor Program for the procurement of 79,477 feet of electrical power cable, identified by NSN 6145012027745. This requirement is a total small business set-aside under NAICS code 331318. The material is designated as a critical application item and must comply with basic specification MIL-DTL-24643/3F Revision F and reference specification MIL-DTL-24643D Revision D. Supplies must be provided in continuous lengths based on the applicable advice code, with a quantity variance allowance of plus or minus 5 percent. The contract mandates strict adherence to technical and quality standards, including the prohibition of intentionally added mercury and compliance with the Qualified Products List or Qualified Manufacturers List. Packaging and preservation must follow MIL-STD-2073-1E and MIL-DTL-12000, with palletization meeting RP001 requirements and marking conforming to MIL-STD-129. Delivery is set for 103 days after order, with FOB Origin terms and inspection and acceptance occurring at the destination, DLA Distribution San Diego. Payment will be processed electronically via the Wide Area WorkFlow system. Offerors must submit quotes through DIBBS and comply with the Buy American Act and Berry Amendment domestic sourcing restrictions.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

HUD Optical and Electronic Component SupplyThe HUD Optical and Electronic Component Supply subcontract involves the provision of high-precision optical elements and electronic sub-components for prime contractors supporting DLA Aviation projects. Specifically, the scope includes the delivery of aerospace-grade optical glass and military-spec electronic boards that adhere to Drawing 46430010/46430120 to ensure the proper form, fit, and function for F-16 D models. To maintain strict quality standards, the provider must hold AS9100 certification and ensure full material traceability for all certified raw materials and sub-components. This Department of Defense requirement, managed by DLA Aviation at Ogden, was posted on November 2, 2026, with a response deadline of November 18, 2026.

Ut DLA Aviation At Ogden

POSTED

DEADLINE

Aerospace-Grade Aluminum and Steel Alloy SupplyThis subcontract, managed by the Department of Defense through DLA Aviation at Oklahoma City, involves the supply of certified aerospace-grade aluminum and steel alloys for prime contractors. The scope of work requires the provision of raw materials that strictly adhere to the alloy specifications of MPN 0ZWK8 2048666-2-1, with delivery handled directly to the manufacturer. To ensure compliance with rigorous aerospace standards, the supplier must provide Mill Test Reports and material certifications that are compatible with AS9100 quality requirements. The opportunity was posted on November 2, 2026, with a response deadline of December 2, 2026, falling under NAICS code 331318.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

CABLE, POWER, ELECTRICAL

Solicitation # SPE7M1-27-T-1838

Solicitation SPE7M1-27-T-1838, issued by the DLA Weapons Support Maritime Supply Chain, is a fixed-price request for 500 feet of electrical power cable, identified as NSN 6145-01-341-9056 and part number M3432-03HDF(3/1)1460. This is designated as a critical application item that must comply with basic specification MIL-DTL-3432J(2) Revision J and TDP Rev A Gen 1. The material must be provided in one continuous length per reel, with specific acceptability for multiple unit packs depending on the assigned Advice code. The delivery is required within 208 days after order, with a required delivery date of June 9, 2027, shipped FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to military standards for packaging and marking, specifically MIL-DTL-12000 for cable preservation, MIL-STD-2073-1E for packaging data, and MIL-STD-129 for shipment marking. Inspection and acceptance will occur at the destination. Offerors must comply with domestic material restrictions, including the Berry Amendment and the Buy American Act, and maintain active registration in the System for Award Management. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with various FAR and DFARS clauses regarding equal opportunity, human trafficking, and cybersecurity safeguarding of covered defense information.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

COMPUTER SUBASSEMBLY

Solicitation # SPE8EN-27-T-0310

Solicitation SPE8EN-27-T-0310 is a Request for Quotations issued by DLA Troop Support for the procurement of one computer subassembly, identified by NSN 7050-01-626-1597 and part number MS20-1600EAHPHHXX.X. The item is to be delivered FOB Destination to the USS Theodore Roosevelt CVN 71, with a required delivery date of October 28, 2026, and a delivery timeframe of 20 days after award. The procurement is classified under NAICS code 331318 and requires adherence to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements and specific prohibitions against the intentional addition of mercury or mercury-containing compounds. The contract mandates compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing and receiving reports via the Wide Area WorkFlow system. Key regulatory clauses are incorporated, including the Buy American Act, DFARS safeguarding of covered defense information, and prohibitions on covered defense telecommunications equipment. Quotations must be submitted through the DLA Internet Bid Board System by November 12, 2026.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

Supply of Steel Comp 4130 Flat BarThis subcontract involves the supply of 56 linear feet of specialty alloy Steel Comp 4130 flat bar for prime contractors supporting DLA supply contracts at the DDSP New Cumberland Facility. The required material must be cold drawn and annealed with specific dimensions of 1.250 inches in width and 0.500 inches in thickness, provided in lengths ranging from 10 to 12 feet. Compliance with MIL-STD-129, ASTM A700, and RP001 marking and packaging standards is mandatory. Additionally, the supplier must maintain QSLM/QSLD listing and provide full Mill-Material Certification. The opportunity is categorized under NAICS code 423440, with a response deadline of November 16, 2026.

Other Commercial Equipment Merchant Wholesalers

POSTED

about 6 hours ago

DEADLINE

Supply of Cold Finished Square Steel Bars (1018 Steel)This subcontract through the Department of Defense DDSP New Cumberland Facility involves the supply of cold-finished 1018 square steel bars for prime contractors supporting DLA Troop Support. The requirement specifies a total of 667 linear feet of steel bars with a width of 0.625 inches across flats and individual lengths ranging from 10 to 14 feet. All materials must strictly adhere to the DLA Master List of Technical and Quality Requirements. The project is categorized under NAICS code 423430 and will be performed in New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 16, 2026, following the posting date of November 3, 2026.

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

about 6 hours ago

DEADLINE

Supply of Steel Comp 303 Hexagonal BarsThis subcontract involves the supply of cold-finished, annealed hexagonal steel bars for prime contractors supporting DLA Distribution supply contracts at the New Cumberland facility. The specific requirements call for Steel Comp 303 bars with a width of 0.875 inches across flats and lengths ranging from 10 to 12 feet, maintaining a reference weight of 2.307 LB/FT. The total delivery requirement is for 83 feet of the specified steel bars. In addition to the physical materials, the contractor must provide material certifications, Contract Data Requirements Lists, and DD Form 1423s to ensure compliance with Department of Defense standards.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

Precision Steel Bar Manufacturing & SupplyThis subcontract for the Department of Defense DDSP New Cumberland Facility involves the manufacturing and supply of 16 precision-ground steel bars for prime contractors supporting DLA supply contracts. The scope of work requires the production of round steel bars using Steel UNS T12001 via hot-rolled or forged methods, followed by annealing and polished precision grinding to a diameter of 1.000 inch. All deliverables must be accompanied by Certificates of Quality Compliance. Strict adherence to technical and regulatory standards is mandatory, specifically ASTM A600-92A and SAE AMS2806 Revision D. Additionally, the performing contractor must maintain a QSLD listing and ensure full compliance with NIST SP 800-171. The project is categorized under NAICS code 331491, with performance taking place in New Cumberland.

Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 6 hours ago

DEADLINE

Supply of Cold Drawn Round Steel Bars (1018/1020)This subcontract through the Department of Defense DDSP New Cumberland Facility involves the supply of cold drawn round steel bars to support DLA Troop Support Construction and Equipment Metals contracts. The required materials consist of 1018/1020 steel composition bars with a diameter of 0.500 inches and lengths ranging from 10 to 12 feet. The contractor is responsible for delivering physical metal bars that adhere to strict dimensional and material specifications. A critical requirement of the contract is the continuous marking of all units, which must include the contract delivery order, NSN, specification number, grade, alloy, and manufacturer heat or lot numbers. Performance will take place in New Cumberland, Pennsylvania.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of Forged Flat Aluminum Alloy 2014-T6 BarsThis subcontract through the Department of Defense DDSP New Cumberland Facility involves the supply of forged flat aluminum alloy 2014-T6 bars. The material must be forged to specific dimensions of 2.500 inches in thickness, 4.750 inches in width, and 12.00 feet in length, with a total delivery requirement of 14,000 linear feet. These supplies are intended for prime contractors fulfilling DLA Troop Support Construction and Equipment Metals contracts. Compliance with industry standards is mandatory, requiring packing according to ASTM B660 and marking in accordance with MIL-STD-129. The performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 16, 2026, under NAICS code 332431.

Metal Can Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of Annealed Steel Flat Bars (4140 HR)This subcontract involves the supply of 4140 HR annealed steel flat bars for prime contractors working on DLA Troop Support Construction and Equipment projects. The required materials must have a thickness of 1.000 inch, a width of 6.000 inches, and lengths ranging from 8 to 12 feet, with a total delivery requirement of 27.000 feet. The project is managed by the Department of Defense through the DDSP New Cumberland Facility. To be eligible, suppliers must be listed on the Qualified Suppliers List for Distributors and ensure all materials comply with the DLA Master List Technical and Quality Requirements. The performance of this contract will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 16, 2026.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of Steel Comp XM-13 Metal BarsThis subcontract involves the supply of 43 linear feet of specialized STEEL COMP XM-13 metal bars to support prime contractors for DLA Troop Support Construction and Equipment contracts. The material must feature a hot finish and flat profile with a thickness of 0.500 inches and lengths ranging from 10 to 12 feet. All supplies must adhere to NSN 9510-00-448-1394 specifications and maintain a reference weight of 5.100 LB/FT. The contract is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. Interested parties must respond by November 16, 2026, under NAICS code 331110.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0212

Solicitation SPE8E4-27-T-0212 is a small business set-aside request for quotations for the procurement of 27 feet of 4140 steel composite metal bar. The material must be hot rolled, flat, and annealed, with a thickness of 1.000 inch, a width of 6.000 inches, and lengths between 8 and 12 feet in whole foot increments. The product must adhere to SAE AMS6382S and SAE AMS2806 standards. Delivery is required by February 22, 2027, with a need ship date of April 26, 2027, to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract is FOB Origin, and inspection and acceptance will occur at the destination. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). A Certificate of Quality Compliance (Mill-Material Certification) is mandatory for every shipment. Strict marking and packaging requirements apply, including compliance with MIL-STD-129 and MIL-STD-2073-1E, with specific mandates for continuous identification markings and waterproof stenciling or stamping. Failure to comply with these marking requirements is grounds for product rejection. The procurement also incorporates the Buy American Act, the Berry Amendment, and requires the use of the Wide Area WorkFlow (WAWF) system for invoicing and receiving reports.

Iron and Steel Forging

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0214

Solicitation SPE8E4-27-T-0214 is a small business set-aside for the procurement of 66 feet of round extruded, rolled, or cold-finished aluminum alloy 6061 bar with T-6 temper. The material must have a diameter of 5.500 inches and be supplied in whole feet lengths between 10 and 12 feet. The contract is issued by DLA Distribution with a required delivery date of January 30, 2027, and a delivery lead time of 160 days. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DDSP New Cumberland facility in Pennsylvania. The procurement is subject to strict quality and eligibility requirements, including the Qualified Suppliers List for Distributors (QSLD) and the requirement for a Mill-Material Certification provided with every shipment. Technical standards include adherence to SAE AMS4117M, ASTM B660, and ASTM B666/B666M-20. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with specific requirements for continuous identification markings on each unit. The contract incorporates various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing.

Nonferrous Forging

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0225

Solicitation SPE8E4-27-T-0225 is a small business set-aside request for the procurement of 56 feet of metal bar, specifically Steel Comp 4130, cold drawn, flat, and annealed. The material must measure 1.250 inches wide by 0.500 inches thick, with lengths provided in whole feet between 10 and 12 feet. Delivery is required within 160 days, with a need ship date of April 26, 2027, and a quantity variance of plus or minus 10 percent is permitted. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Compliance with the Qualified Suppliers List for Manufacturers and Distributors (QSLM/QSLD) is mandatory, and a Certificate of Quality Compliance (Mill-Material Certification) must accompany every shipment. Strict marking and packaging requirements apply, including adherence to MIL-STD-129, ASTM A700, and RP001, with specific continuous identification markings required on each unit of issue. Inspection and acceptance will occur at the destination. The procurement incorporates various FAR and DFARS clauses, including those for HUBZone price evaluation preference, the Buy American Act, and safeguarding covered defense information. Quotations are to be submitted via DIBBS by November 16, 2026.

Iron and Steel Forging

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0219

Solicitation SPE8E4-27-T-0219 is for the procurement of 83 feet of annealed, cold-finished hexagonal steel bar (Steel Comp 303) with a width of 0.875 inches across flats and lengths between 10 and 12 feet. The material must comply with ASTM A582/A582M and SAE AMS2806 Revision D standards. Delivery is required within 160 days, with an original required delivery date of February 13, 2027, and a need ship date of April 26, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. A quantity variance of plus or minus 10 percent is permitted. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). The contractor must provide a Certificate of Quality Compliance (Mill-Material Certification) with every shipment and forward a copy to the DLA Troop Support Contracting Officer. Strict marking and packaging requirements apply, including adherence to MIL-STD-129, ASTM A700, and RP001. Continuous identification markings, including the contract delivery order number, NSN, and manufacturer details, are mandatory; failure to comply with these marking methods will result in the rejection of the product. Inspection and acceptance will take place at the destination. The contract incorporates various FAR and DFARS clauses, including the Buy American Act, Berry Amendment, and NIST SP 800-171 cybersecurity requirements.

Iron and Steel Forging

POSTED

about 6 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

61--CABLE,POWER,ELECTRICAL

Solicitation # SPE7M1-27-T-1265

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS